The best tutorial for replacing door switch on YT.

, I change the belt of my dryer and did not wanted to turn on no more , I look at this video and it came out that I desconect by accident the door switch , thanks for the help!!

Definitely liked! 👍🏿 Mines was kind of a dead giveaway. A few weeks ago I noticed I had to close the door two or three times to get it to work. Tonight it wouldn’t start at all so I opened it back up and wiggled the switch. It came on for a split second then died again. I also noticed the switch doesn’t seem to “click” whenever I press it with my thumb, not sure if it’s supposed too or not. “Well if ain’t one thing it’s another around here.”

My PowerPoint dont start I have to hold the power button for it to make a sound when I let it go it stop is this video how to fix that problem

I have a brand new GE dryer that won't start..... I don't see any shipping bolts.... What else do you suggest? Thanks 🙏

So my dryer came apart just as u said but it has a metal cover over the door switch that I’m struggling with

Good help. question: Button starting dryer has fire, heater and blower come on but Tumbler does not turn?

IS IT THE SAME FOR GAS, MY DOOR SWITCH SEEMS TO BE IN THE DOOR HINGE

I guess you could disassemble your dryer to replace the door switch. I just popped the switch out the front, replaced it, and popped it back in. Gave it a pull and on side came free. A little persuasion from my trusty pocketknife and the other side popped out. The whole operation took about a minute, including thirty seconds of wondering why anybody wouldn't try this first.

Thanks for the help! Intermittent switch found and replaced.

You were troubling shooting a dryer that didn't start. You rang out door switch as good then reassembled without telling why it didn't run?

Totally awesome you just helped me out big time!!!

Hey I changed out my door switch and I have changed the push start button. The dryer makes quiet hum and does nothing any ideas?

thank you kind person this saved me big time

ok, That was a good video. Now I have done what you did to the dryer, with the exception of the switch. Now I presume that the door switch is bad. So would I be correct?

Yeah mine don’t make the clicking noise you was talking about does that mean the switch is gone out on my dryer I know the timer is hard to turn

Excellent video thanks

Very nice video ,thsnks!!!

I accidentally popped open the switch. The pin fell apart. Could you tell me how to put it back together

WDM, Thank you for this Video. My GED33EASKWW stopped wanting to start. So with any electrical device we need to make sure the electricity is getting where it needs to go. So yea any time there are switches they get checked first. I just did not know how to disassemble the dryer in an easy way and put back easy. So if it is OK to ask, what does the appliance industry call the door/start switches. Referring to switch types like, single pole single trow etc. If both door/start switch work then the next thing I would check is the heat resister which is also a switch. I have replaced these before because people do not vent nor care for their appliance correctly. Appliance manual is just junk book to them but that is OK. Pay me now that you do not read book. LOL

What’s the part number for the door switch

Thank you for this explained video. Love this channel

Thank you soooo much!!!!

My door closes but its like the hitton is not pressed all the way so the light doesnt turn on and gives me a door alert. I taped the button down and it does the trick for now. I just don’t understand how the door closes all the way but the button is not being pressed down low enough maybe??

Is the thermal fuse mounted on blower in the dryer

I have a GTDP490ED2WS. MY SON OILED THE BELT. NOW THE DRYER WONT START ANY SUGGESTIONS. ALL WIRES LOOK PLUGGED UP

Watched and thumbs-upped 👍

I just got mine today. He won't start. Then I unplugged it. It started then shutt down off.

Thank you

Hello there... i have a kenmore. Not sure on the yr cuz its my gmas. I was doing laundry. Realized one of my kids must've put a pen somewhere even tho I WAS DOING BLANKETS AND CHECKED IT ALL but the pen still snuck through lol.. it opened and got ink everywhere!! I tried removing everything i could with alcohol and acetone after soap and water didn't work. Also i tried a tiny bit of comet with soap and water but that didn't quite work either which is why i googled and it suggested to use alcohol and/ or acetone polish remove.. it got enough off to where i don't think it will come off anymore lol it was difficult to get to some spots. I was moving the drum back and forth instead of getting all double jointed since I'm a fat momma with lupus and Fibromyalgia and can't move that well anymore. No linger 95 lb high school kid lol anyhoo... i did lean on the door a bit but i was being careful ( I THOUGHT) when needing to lean against it a bit. So my issue is that the door doesn't stay closed now so it won't stay on. Lol atm i have clear gorilla tape to keep it working but it still stops every now and again. Our door opens downward. Its a rectangular door. The little light and door clicker is hanging ( if looking at the dryers from the front with door open) its on the top right and it IS NOT broken. ( i watched about 20 vids lmao) i pressed down on it and the light turns off as if the door is closed and the drum will move if i push it down and press start and as soon as i let go it stops.. now...i can see the top middle fastener piece that clicks into that plastic slit piece to the door that helps keep the door closed. Neither of those pieces are broken either. Now the only other thing i could think of it the metal door hinges that are to the left and right of the door. They seem to be working find BUT i also did see a video where they can need to be replaced even if they work fine and like i said i am a big chika now and either the connecter pieces that snap together to help close the door may not be broken but may be lose OR I'm assuming its that we need new door hinges??? Lol sorry on my descriptions but i don't know the names of all the pieces even after watching 20 or more repair kenmore vids because my comprehension is a bit *bleep* lol... if you could give me a suggestion or 2 that would be amazeballz.. lmao if bot its all good! Just hoping to save my g-ma a service call since we did just get the washer fixed but it took months and months for the replacement part to come in and them the insurance guys tried giving my gma the run around but she handed them their ass treating her as if shea dumb cuz she's one smart lady. Lol also my grandpa who's just starting to have bad alz heimer issies took his car and floored it into reverse hitting my gmas car, my uncles, and flattened the neighbors yard so she's paying for insur. stuff for that issue, for her car, and the neighbors yard the insur. is paying for. And the day that all happened the electrician was fixing our crap electricity my grandfather must've rigged very poorly when he rebuilt the extension to the house cuz all the issues were the parts he did yrs ago hahaha lmao SoOoo... i was KIND OF HOPING & 🙏 i could fix it myself as I'm usually quite handy once I'm taught or told how to fix something, also because I'm the one who caused all the madness 😆.. i thought i could help her out and fix my mistake myself (with the power off of course!!) Hahaha ( also sorry for the craycray novel) 🤣🤣🤣

Where can i get this exact part though? I don't see it in your Amazon link.

Great video! I have a GE. Question, please: with the door switch- depressing and releasing makes the interior light go on and off. Does that mean the switch is still good or can the light function and the switch be bad? I ask because I can't hear a ''click'' when I manually depress the tab (but the light responds). Appreciate your advice!

Hi im a female, lost. My dryer wont turn on and light wont turn on. If its the door switch causing it not to turn on, then wouldnt the light STAY on? Like thinking the door was open, hence causing it not to start? Or could the switch just go completely out causing both the light to not turn on and the dryer not to start?

Hey I have a hot point dryer so we had a power outage and we was without power for about 16 hours yesterday and my dryer just stop working when the power come back on. It turn on for a sec then it made the nose like the clothes was done…it never come back on I’ve tried to turn the knob when I put it on about 80 it started but it stop I kept pushing the start button but it never come back on. I also unplugged it and checked the control panel I have no idea what’s going on I think it just need to be resettled to be honest but Idk can you help please and thanks -keyia

Mine turns on when I put pressure on the door but turns 9ff when I let go.

Can you help me with the wiring on my Hotpoint timer?

If it’s not the door switch, what should I check next?

Question? If a gas dryer themo fuse goes bad.will the unit not power up..this unit has a computer broad not lighting up

Kenmore dryer won't start check fuse check motor check start switch tech power in what's next

I have a GE that doesn’t start and don’t look like the one here. They told me it might be the fuse or the latch where is them parts located?

Where to buy switch thanks for the vidro

My dryer will not come on

My ge dryer not heating

Why does my GE dryer start sometimes if I slam the door? Otherwise it usually does not start.

Se puede convertir una secadora que usa gas natural a propane

pls my Hotpoint Ariston dryer ftcd87 wont start

Wait, can't you pop that switch out from the front with a screw driver and putty knife without taking the whole thing apart?

❤

What is your meter set to?

I turn the start, starts tuning the drom, when i realis, all stop

Hi I need to replace the start switch on my GE,,,so there are 3 wires but the part only has 2 places to put wires on? Please can you help?

Dryer trys to start but tub does not engage

Question, where do you get your parts?

My GE DIGITAL DRYER DOES NOT HAVE POWER

Thank you!!!

Good lord... My dryer is literally brand new and the door switch is complete bunk. I wish companies actually made good products...

Your going much to fast. And your video shots are too far!!