I know this video is old but thank you for taking the time to do an excellent video and of course posting it for us all to watch. I am going over to the site now to check this out.
@E.force898 ай бұрын
Wow. phenomenal job
@slamdvw11 жыл бұрын
Very nice!! I am looking at getting the same conversion block for my project.
@jrperrotta10 ай бұрын
I was so intrigued with what you did I asked myself why didn't you just triple filter the heated waste oil (down to 1 micron for example) and direct it into the pressure pump? That would not only save a lot of time and may even be as efficient?
@MattVerley10 ай бұрын
I attempted this on my very first build; I already owned a centrifuge system for producing fuel from waste oil, and I tried running some of the filtered oil in the furnace. The burn was inconsistent and the nozzle was prone to carbon buildup. It required constant attention and tinkering, and was very picky about what kind of waste I ran through it. The siphon setup will run on practically anything, and only needs a basic filter to take out the big chunks. Much easier to manage.
@mikenobbe11356 жыл бұрын
where do I find electrictrodes for beckett burner nice job keep vids coming
@ncut55475 жыл бұрын
Just wondering how u have the control box wired to come on when the temp is right ...I have just made a heat nozzle holder with a heat cartridge in it should work fine how to wire and watt to use is not my strong point thks ...keep up the good work videos are just the ticket
@grulich693 жыл бұрын
Thanks for posting the video. I read the thread at garagejournal. The pics seem to be gone. Do you have the pics of the inside of the burner anywhere?
@Mrdubomb7 жыл бұрын
I would like to build myself a waste oil pool heater, can you give me any tips on what you would do, in particular the heat exchanger portion great video
@oby-16073 жыл бұрын
Wow, 4000 gallons is like a tanker truck full. You are getting your use out of that furnace. How is it working today? I want to do the same thing. God knows how many gallons you have burnt to today.
@MattVerley3 жыл бұрын
Yep, it’s hard at work today! Will probably run through a few gallons today...doing an epoxy pour tonight so shop has to stay at 75 degrees.
@3cl113 жыл бұрын
Nice work, I'll take one.
@curtiscastle6341 Жыл бұрын
Do you have any diagrams of how to do and what you used
@hotrodAndy9 жыл бұрын
Thank you for all the work you put into this! I have been looking forever for a conversion to wmo. Could I do the same to my house heater?
@bobberbuilder61224 жыл бұрын
You could but if your house burns down your insurance company won't cover it
@SeasideBJJ12 жыл бұрын
Great Info!
@shaneprescott4324 жыл бұрын
Thanks for the info. I'm in the Albany, Schenectady area . Can you school me on the electronics vocabulary .
@electromechanicalstuff26025 жыл бұрын
Sewerzuk What lift pump r u using? The forum link for HF Doesnt work anymore. I have 2 options right now buy 2 williamsons temp-o-matics for $400 and convert them or buy an actua 300kbtul waste oil furnace with all pumps and tank for $1600. Need to weigh out the costs
@victortrimble47412 жыл бұрын
Ready to build one these. If I need help. Are u still available. Thanks
@staym925 Жыл бұрын
What pump do you use to pump oil into the tank on side of the furnace.
@MattVerley Жыл бұрын
I use a carbonator pump. They are made to pump heavy syrup in soda fountains, and can be found for around $100 on ebay.
@EntertainmentJSC10 жыл бұрын
I'm want to use a RKC REX-C100FK02-M*AN controller. It appears to similar if not exact to your controller. Do you know if there is any significant differences that might affect me?
@MattVerley10 жыл бұрын
I'm not sure; I've used a handful of these things and they're all a bit different. There are about a dozen manuals floating around, and I've always found one that seems to work for the controller I'm working on...
@electromechanicalstuff26025 жыл бұрын
The ckep1 guy isnt on ebay anymore. Does this kit look similar or is this the same guy. www.ckburners.com/kits.html I just got a cub 700 Its a 720,000 btu diesel furnace. It currently has a 4gph nozzle in it. On a Riello F15 burner. I think i can turn it down to a 2.5 or 3gph nozzle if its too much heat. My barn is a 40x80 wood pole non insulated steel wall and steel roof. I got this thing furnace for $500 on FB market place. Just needed a $40 control box/igniter. Heat exhanger is stainless steel and looks good. Only 1,000 hours.
@reddogfields9 жыл бұрын
Could you share a parts list with me model block and heat elements and time\ controlers
@MattVerley9 жыл бұрын
I have a basic parts list located on the Garage Journal board; www.garagejournal.com/forum/showthread.php?t=24280
@79dodge4ever9 жыл бұрын
+sewerzuk I went on the link you posted looking for the part number or link to what your using for a float switch, currently I'm using a float valve that is supplied by CK burners but that doesn't control my pump like I want to
@MattVerley9 жыл бұрын
I have purchased most of my floats off of ebay; no part numbers. but the ones I like the best are made of stainless steel and sold as aquarium float switches.