Water Based Satinwood, What's The Best?

Рет қаралды 8,673

Painting and Decorating

Жыл бұрын

Water Based Satinwood, What's The Best?
Link to video about mold inhibitor.. • Anti Mould Paint Additive

Пікірлер: 68

@ceciliacopley7227 Жыл бұрын

👍Nice demo, Enjoy your calm style. 💯

@neiledwards9140 Жыл бұрын

I’ve never used Valspar satinwood but will definitely give it go after this post👍

@teckelteckels2730 Жыл бұрын

I really like the Leyland Trade Quick Dry Satinwood. Tried a few and always come back to that. Available everywhere too.

@PaintingandDecorating Жыл бұрын

Yes, good paint, the water based gloss is good also. Cheers mate

@colliedogjoy 11 ай бұрын

Big fan of the Valspar Tough Trade Emulsion, with have to give the Satin a try. My go-to is Zinsser Allcoat at the moment - only problem being brush marks.. Thanks for all the super videos.

@PaintingandDecorating 11 ай бұрын

Thanks, I won't touch Zinsser all coat for that very reason. It makes your work look bad. It actually dries too fast and is not forgiving and does not sit back at all. Valspar good paint I just don't use white emulsion... Only colours and top coats.

@markpennell4378 Жыл бұрын

Another great video, thanks, I'll give valspar a try. Especially with the good opacity, looks impressive! Been using the crown trade fastflow for couple of years now which I know is a hybrid, but find it leaves less brush marks than any other quick dry I've tried so far, but I'll definitely try this on my next job. Ps thanks for all the videos, I'd be lost without them, i've learned more from you guys than I ever did at college 😅. Cheers 👍

@PaintingandDecorating Жыл бұрын

Cheers mate thank you..

@philloyaknow Жыл бұрын

I’ve never tried Valspar, I find Johnstones trade water based is excellent, I’ll try the Valspar, keep up the good work mate 👍 Ps Zinsser degreaser is excellent

@bluj78 Жыл бұрын

Wow, would not have thought that about valspar. Thanks 👍Like you say, great opacity so off to bnq v soon!

@PaintingandDecorating Жыл бұрын

Found that it's the most forgiving paint, and tough. Thanks

@colinwest5294 Жыл бұрын

Have been watching you for years - and I am doing exactly the same job as you describe at the moment. Years ago I used a Dulux water based gloss on my newel posts and spindles - it stayed white for years and I was realy happy with it but then it started to revert and go sticky! I have over painted with oil based a couple of time but no good! I am stripping it all of (by hand nightmare!!!) I am going to undercoat and satinwood oil based (PPG) to get away with this problem again. I expect that the aqueous paints are far better now (that old Dulux paint was very quickly withdrawn) - am I safe with water paints now? Anyhow thanks for a great channel I watch them all but I don’t comment much just learn!!! Thank you for all the hard work and advice its been really helpful all the best mate!

@PaintingandDecorating Жыл бұрын

Thank you, some water based are a lot better these days. I think you have to compromise on some aspects. Handrails can be the most difficult to deal with, in most cases it's hope for the best.

@Pete.Ty1 Жыл бұрын

👍👍👍Thank you

@PaintingandDecorating Жыл бұрын

Thank you

@grahamsmith9788 Жыл бұрын

Useful information, thanks. I've heard it said that water-based isn't very resilient on areas such as handrails where there is frequent contact from greasy hands. Has WB paint development improved, or is this still an issue?

@PaintingandDecorating Жыл бұрын

This Valspar is one of the best that I've used so far. You do have to compromise sometimes. If you find it does come off then you may just need to use oil on the hand rail only. Thanks

@jackw4346 Жыл бұрын

Hi mate, good video. Interesting you use valspar, I’ve only used it once doing a large walk in wardrobe with loads of shelves and I was impressed with it then. I’m interested in the bit where you mention a mould inhibitor. What do you use? And is this something that can be used in emulsion too?

@PaintingandDecorating Жыл бұрын

Thank you, link to video about mold inhibitor... kzfaq.info/get/bejne/rqmjdJx8uprenoE.html

@brettsutherland4194 Жыл бұрын

I enjoy watching your content and have been subscribed for many years. Dealing with asbestos walls what would you recommend. Cheers from Australia.

@PaintingandDecorating Жыл бұрын

Asbestos walls are you sure, double check and check again... If so you need to have it tested to see which asbestos it is, certain types can be deadly. Thanks for watching and subscribing... 👍

@robertnewman4681 Жыл бұрын

All asbestos is deadly

@WhiteDieselShed 8 ай бұрын

WOW, its not yet 5AM and the neighbours have just woken up thinking there was a minor tremor... My speakers are in recovery mode from the volume at the end of the video.

@TapelessDrywallFinishing Жыл бұрын

👍👍

@PaintingandDecorating Жыл бұрын

Thanks

@donnagammell Жыл бұрын

Hi thanks for the Great content can I ask please what brand mould inhibitor do you use ? Thanks

@PaintingandDecorating Жыл бұрын

Thank you, link to video about mold inhibitor.. kzfaq.info/get/bejne/rqmjdJx8uprenoE.html

@donnagammell Жыл бұрын

@@PaintingandDecorating thanks 🙏

@Lloyd1885 2 ай бұрын

Have you tried Benjamin Moore scuffx...a lot of decorators swear by it... personally I think its overpriced, especially when compared to jonnos aqua

@PaintingandDecorating 2 ай бұрын

Not yet but I will give them ago.. thanks

@craigwilliams7516 Жыл бұрын

Thanks for the vid, i will try the valspar at some point. Dulux quick dry satin is ok but better opacity would be helpful. Wetting the surface slightly before applying water based woodwork paint does make it flow a little easier I find. Johnstone's aqua guard is my favourite so far for exterior. It has some oil in it and works very much like an oil based paint. Sadolin supadec is great too, thanks to you guys for recommending that.

@PaintingandDecorating Жыл бұрын

Your welcome thank you.

@Johnnyquid20 Жыл бұрын

So the aqua guard ... Would it hold up on kitchen presses?? Or would oil based be the way2 go???

@craigwilliams7516 Жыл бұрын

Had to google presses! Never heard that term, Scot's or irish i believe?? Water based can never be as durable as oil imho. My advice to customers is that ob is more prep work to apply but tougher/longlasting and wb is less tough but easier to apply and therefore reapply if required. Guess it depends on the level of wear & tear anticipated

@Johnnyquid20 Жыл бұрын

@@craigwilliams7516 Irish lol 😂 yes I think I will go with oil as I don't want them 2 break down thanks very much for the reply 👍

@colliedogjoy 11 ай бұрын

As far as I know, and this could be off-topic, all emulsions contain some oil. Mayonnaise is an emulsion.

@jeffbruce1050 Жыл бұрын

Scuff x .?

@olliebert2788 Жыл бұрын

Stear clear of any woodwork paints you get off the shelf, the best water based satins you can buy are isomat, caparol and Benjamin Moore, trust me I've tried them all over the last 15 years 👍🏻

@gdpaintingdecorating5704 Жыл бұрын

The thing I hate about these waterbased paints is they’re always awful to rub down when it comes to decorating again in the future

@matthewcalder4351 Жыл бұрын

So true think this is an over looked point you have made.i used 60 grit with sander and took the lot off staircase before and problems arose using new hybrid paint just to be sure.

@olliebert2788 Жыл бұрын

It's cos you are using the wrong products, anything off the shelf is crap

@hardworker8030 Жыл бұрын

I used Leyland Trade Quick Dry Satinwood on doors and I was drying to quick and it's leaving roller marks.

@PaintingandDecorating Жыл бұрын

Yes very difficult in warm weather.. add some water and work faster... Only way.. thanks

@colliedogjoy 11 ай бұрын

Try wetting the door down with a wet cloth first. It not only makes it wet, it cools it too.

@colliedogjoy 11 ай бұрын

@@hardworker8030 Yes, if it helps. It keeps the paint 'open' for a tiny bit longer in hot weather. You can also add Floetrol to your paint to help this. Some people add a little water to the paint, but you can quickly end up needing more coats to cover. The best solution is spend on premium paint in the first place. Little Green Intelligent Satin and Gloss are great and lie flat, Tikkurilla, Caparol and Farrow and Ball also make good, expensive paint.

@davecoyne1745 7 ай бұрын

hi are you still using the Water Based Satinwood, is it good stuff

@PaintingandDecorating 7 ай бұрын

Yes it's not bad at all speeds up the job. Thanks

@VSB83 Жыл бұрын

Hi mate are you Manchester based? How do we contact you about your availability? Thanks

@PaintingandDecorating Жыл бұрын

Sorry we only upload videos not really looking for work. Thanks

@duckula316 Жыл бұрын

Is the paint watery

@PaintingandDecorating Жыл бұрын

On a serious note, it's okay 👍

@SurlySteve1 Жыл бұрын

Everal 40

@MEVD2011 Жыл бұрын

Valspar over Benjamin Moore or Isomat.

@PaintingandDecorating Жыл бұрын

Yes

@TheMusclejunkie Жыл бұрын

He's probably never used them 😂

@MEVD2011 Жыл бұрын

@@TheMusclejunkie what’s your go to woodwork paint

@davewright9312 Жыл бұрын

@@PaintingandDecorating I do always have a laugh and wonder when someone will make a comment pretending that they only use premium paints...the reality is that Benjamin Moore satin is 3x the price of valspar so its a big difference on material prices across the board.

@MEVD2011 Жыл бұрын

@@davewright9312 yeah I pretend to be a decorator and lie about the paints I use all I really do it paint sheds a fences all day with cheap paint.

@jackwardley3626 Жыл бұрын

you laying off oil based

@PaintingandDecorating Жыл бұрын

No I'm laying off water based

@jackwardley3626 Жыл бұрын

@@PaintingandDecorating no sorry i meant your moving away from oil based more now

@PaintingandDecorating Жыл бұрын

@@jackwardley3626 yes definitely, less smell, non yellowing makes your job quicker. You just have to compromise on certain aspects but generally it's a better option. Thanks 👍

@jackwardley3626 Жыл бұрын

@@PaintingandDecorating how did you find armstead quick dry satin after using it a few times

@paulf2529 Жыл бұрын

Completely agree with you regards bin not blocking knots. I think the bin formulation was changed a year or two back and it's not great these days.