You are very welcome. The videos are now here for ever :)

You'll like the next few videos.

Hybrid though... does that bother you?

That arroworthy brush didn't clean out. Maybe it depends on bristle of the brush being used.

@@ProfessionalPainterDecorator I always use a synthetic brush… pre wet before use and If doing slot of glossing I clean it out about every 30-45mins to stop it clogging up … works for me… sprays well as well 😃

@@ProfessionalPainterDecorator also try the Dulux Trade Quick Dry Gloss… very similar to the Johnstones but doesn’t mess the brush up as much

I don't think you're wrong. Many years ago Dulux brought out an Aqua Gloss.... can't remember it's proper name. I used it.. with new purdies..... killed them.. I wrote and complained to DULUX, who responded and said they were aware of the problem..... as I needed to wash out in White Spirit. They sent me a voucher for 5ltres of paint.

bit of a faff for a waterbased paint ;)

@@ProfessionalPainterDecorator can’t disagree with that. Don’t use the stuff personally anymore but that’s the solution anyways pal 😉

A lot of poncing about though

as you saw in the video, that arroworthy brush didn't wash out well with water or anything else. think it comes down to what the filament of the brush is made from?

What does the PU mean for their gloss?

@@ProfessionalPainterDecorator Polurethane. It’s an acrylic enamel 👍🏼 I know some that for the first coat will mix 50/50 haft primer with the pu-gloss. Then finish with a coat of the gloss. But yea, for sure, a higher gloss using Jonno’s aqua u/c and gloss but as you say, killer on the brush. I find caparol nicer to use too plus it wont yellow as not a hybrid. Again, love your videos Phil! Sure you’ll get the Porsche in no time 😄

Have you watched my video on Everal Aqua 80 from last week?

Sorry to hear that, I've said it for a while.. the whites's are rubbish to cover. Off whites are better

cool, how did you find the coverage?

@@ProfessionalPainterDecorator Of the Dulux water-based gloss? When I first used it a few years ago my heart sank, I though oh sh!t, this is terrible gear, first coat drags and not very good flow/coverage, I literally had to teach myself on the job. You have to build it up, usually 3 coats minimum. Light rub between coats. I find you’ve got to get it on quick, move it around and lay of, don’t go back unless a run appears. It flashes the finish. I’ve foam rolled it on doors and laid off with a brush. It’s prone to runs but as I said you learn the more you use it how it performs. Short answer - poor coverage. But…. great finish for water based and stays white for longer than oil. Brushes clean up easy also, very low odour, very durable and easy to repair if heavy chip or scratch. I think painters use it, see the first coat as it goes on and throw it in the bin. It’s definitely a paint that needs patience. I’ve written a novel here I must stop 🤭

@@MrSmid888 you need to watch my video from a few months ago about the Dulux Exterior water based gloss!! have you seen it yet?

@@ProfessionalPainterDecorator no, il look it up, cheers. If it’s the same stuff I tried a few years ago it was terrible, nothing like the interior stuff. I’ve actually not seen/used a decent exterior water based gloss yet.

Hi I'd be looking at water based. Either. Isomat, Bedec. You can get those from Brewers

Definitely check out linseed oil paints for windows. All modern paints will form a film and eventually crack and peel, trapping water underneath. The linseed paints take ages to dry, but they're beautiful to use and will last decades with just the occasional wipe-over (3 years or so) with a little pure linseed oil. After much research, and initial application over 10 years ago, I'll not use anything else for windows.

I know what you mean, warm soapy water still doesn't do much.

Also. Any opinion on the Velspar water based gloss?

anything with an oil base will yellow off, even more so if it's not getting any UV/natural light, you know what I mean when you move a bed away from a wall and the white gloss has gone yellow. Some water based hybrid paints, have a slight oil content, they also yellow off, but not as bad as a traditional oil based paint. This is more noticeable with white paint ;)

Valspar WB Gloss?? I'll let you use the search bar on my channel for that one ;)

Let's hope so. Correct on the warm water and washing up liquid. Start with cold to get most of it out the brush, then turn up the heat ;) sort of lol

not sure. but there is noe an aqua guard gloss.... that review is coming.

Oooh.... I'd say.. try it. I think you may find it would start setting up... But also it more a case that the longer you use it for, it builds up and makes the brush not so useable. Hence the need to wash out regularly while using the paint. I think if you know it's a hybrid and it'll not washing out well, keep some white sport by you so you can wash out as much as you can with cool water first, shake out the water... If you think it's not washed out enough, try white sport and see if that helps. It did for me using the Satin. I finished off with meths .. the. Re washed out with warm soapy water. It also can be the type of brushes. So do better than others with hybrid paints.

@@ProfessionalPainterDecorator it’s a shame as it would be a fantastic gloss if it didn’t kill brushes. I know it will yellow over time but nowhere near the rate of an oil based gloss. Do you think it would be ok using Joncryl as an undercoat instead? At least that way you could half the rate of brushes it kills

@@gdpaintingdecorating5704 keep with the correct system... Hand in glove then. Ppl complain about f&b woodwork paints not drying well.. the. You hear they've not used the f&b undercoat primer to save money they used another brand. Then wonder why they get problems.

Great point! There's a few you need to try, the ones that are proper acrylic based paints.... Bedec, Isomat are worth watching videos on. Brushes was out fine as well. Waterbase Gloss.... Don't expect oil gloss standard of gloss. You will be look at a hybrid for your gloss.... Farrow and Ball, Crown Fast Flow are very good gloss'

@@ProfessionalPainterDecorator cheers Phil. Great info.

PHIL! What do you recommend for spraying? I’ve sprayed with a few different paints before but I’m about to spray a load of furniture for a customer and I want something either satin or gloss finish that is REALLY durable

but it says water based all over it ;)

@@ProfessionalPainterDecorator yes it says water based cause the carrier for the paint is water instead of solvent carrier but the binder is alkyd oil so its a oil paint mixed into water

There are plenty of water based paints used outside now, paint technology has come on leaps and bounds. Some really good paints for outside... prep is still the key and using the correct process of prime/Uc and two top coats is the main thing. I alway say..... have you been to an outside that's in poor condition that been done in oil based paint? Most will say yes. great paints we use outside... F&B exterior eggshell Bedec MSP AllCoat Exterior (we use that inside as well) Everal Aqua is also a paint that can be used inside and out. Bedec Barnpaint... awsome, have you see that video I've done a few weeks ago?

I'll wait to see if BM want to offer some paint for me to try out and compare against these brands. ;)

@@ProfessionalPainterDecorator 🤔🤔🤔

It's just the brush cleaning though. very hit and miss.

what are you painting?

brill aren't they.... do try the arroworthy ones as well... you'll be impressed.

Well that defeats the waterbased paint system using oil based as the UC. Never heard of anyone doing that, who told you it? There's so many good water based adhesion primer/UC onnthr market now days too. Remember.. back in the day when we used oil based gloss.... Wed sand down etc. a coat of Dulux acrylic primer/UC then finish with one coat of oil gloss. It never peeled off.

@@ProfessionalPainterDecorator I came up with it my self after having some issues with some doors in a large public building, usual spec of grip primer and Dulux Acrylic gloss system, I was called back after a few weeks because the paint work was being damaged by a trolly bashing into the doors and once the surface was broken,people were finding they could peel the edges, so after a meeting on site with a paint rep who recommended another water based product as a primer,which also failed,I decided the best paint to go over old oil gloss would be oil u/c it’s meant to stick to it after all, So if I’m painting new wood I’ll acrylic every coat,if it’s oil paint that’s the existing surface,then the first coat is always oil based undercoat. Most modern undercoats are touch dry in 20 to 30 minutes ,only issue is leaving it overnight to dry properly before recoating,it gives you a great surface to de -nib and apply finish coats, acrylic gloss loves oil undercoat, sticks like glue ,never had any issues. You can go back and acrylic gloss them time and time again. I guess everyone has their own way of working, great content by the way.

@@Novacastrian have you tried Isomat All Primer then two coats of their satin or gloss?

@@ProfessionalPainterDecorator I haven’t tried it,but I will ,cheers!

those wickes brushes washed out ok.. and were fine being used over and over again... and only £11 a pack.

yeah, thats no good though when you're needing to wash them our every hour... or less.

@@ProfessionalPainterDecorator true enough, its a proper nuisance, I just swap kits now, nothing worse than trying to cut in with a brush that feels like the kitchen fitter has borrowed to use for contact adhesive 😩

We don't use it anymore cus of the problems with brush washing out. Have you tried Crown Fast Flow ?

Those lights are pants lol

I need some UC and 90 sent to me to test out then.. where's Ben when you need him?????

do you not think the paint dampens the brush anyway? but if you think it gets washed out after 30mins of use.. and you go back to using it.. and it's damp.... and it still effects the brush... I can't see it makes any difference?

@@ProfessionalPainterDecorator no I just think that if the inside of the brush was already damp, then it wouldn't get the chance to dry as much, making it easier to wash out when needed.

yes your right this a oil paint but just blended with water instead of solvents

sold to the masses as a water based gloss though ;)

@@ProfessionalPainterDecorator yes and they are not the only one. Decorators will use these products in good faith and unfortunately might cone unstuck☹️☹️☹️ Like I said before,jonnos will go yellow in time .☹️ and so will the others.

Hi. it is, but the gloss is awesome..... being that hybrid (oil of some sort mix), have a look at the other gloss testing videos, The Decec Aqua Advance and also the Isomat Gloss are good alternatives and the brushes wash out very well.

I agree most Dec centres have decent brushes on offer all the time and for a few quid if you get to use it for 3 or 4 jobs it's not really worth whining about

lol very frustrating.... still goes yellow as well.

@@ProfessionalPainterDecorator It looks good. Love the videos 👍🙂

@@rachelbailey52 thanks.. loads for you to watch and drop a sleep at. Like and share, like and share lol

even then.. its not good.

​@@ProfessionalPainterDecorator zinsser bin brush cleaner.. job done

@@johnzombi6574 which will be Meths ;)

@@ProfessionalPainterDecorator doesn't smell like meths does, try it in a video.. 👍

all the paint seems to be expensive.. like petrol lol I'll mention costs for you on next week's videos using Isomat.

Think last time I went on my brush mate brush box was pre pandemic lol... All Coat video out later this week ;)

you watched the video?.... the gloss covered fine. One Uc and two top coats.. over the dark blue Frenchic.

@@ProfessionalPainterDecorator But it still looks fake and council Phil,my clients are all middle class snowflakes who force me to use farrow & ball eggshell(mainly to leave tins outside next to the rubbish bin for all to see)and it still looks cheap and council.

@@josephjackson7477 that's fine as long as you use the F&B Modern Eggshell ;) lol

Not yet Ian, waiting for the phone call ;) lol

In what way? I prefer modern eggshell for Woodwork personally.. it's a harder wearing finish.

It’s a great product Phil I agree But every brush I’ve had is now not flexible like they were almost stiffened the bristles or nylon after cleaning So now what I do is if I have a stairs and ten doors to do I do two frames and doors then wash the brushes out with fairy then back into paint then wash every hour or two I know at least 25 painters in Bedfordshire that all day the same farrow and ball estate egshell ruins their brushes I’ve not tried Johnstones I think farrow and ball was best when it was oil based I bet your dad will agree Alkyd resin I think is to blame I use a lot of farrow and ball including emulsions But the egshell seems to be the culprit I will e mail farrow and ball and see what they say..

Yep... And hybrid or not, no disputing that it's a cracking gloss level.

SuperDec?

@@ProfessionalPainterDecorator my kind decorator painted water based paint over my bare wooden skirting boards. I'm not very happy about it. What can I do to put the job right myself? Do I put bin Zinzer primer/undercoat then 2 coats of oil based paint as top coat or do I completely sand the water based paint of and start again?

@@rachelbailey52 did he prime it first with anything? What paint did he use?

@@ProfessionalPainterDecorator I think he used water based Johnstones satin wood paint or water based Leyland satin wood paint. He didn't use a primer.

@@rachelbailey52 unfortunately the damage is done. You're only as good as the first coat that's applied And the process hasn't been done correctly. A little knowledge...... As they say

just like an oil paint going yellow.... but easy to apply, great gloss and no smell and quick drying....... so no need for oil ever again?

a few others don't either!!

@@ProfessionalPainterDecorator which paints stay white?

you're better looking at paints that are more acrylic based, like isomat and bedec to name a couple.

England.

I like your outer corner edge video. I am going to use it when I have an outside edge that throws off my pattern, but I’m going to do my double cut because for two reasons… I don’t want to see the edge of the overlapped wallpaper and I don’t want to see the bump, but I like what you’re saying, and it is the first time I have ever seen it.

Do a video please of your tools, your pouch on you when you work and please if you do not mind, your truck inside and how do you set it up

You look about 45-50 years of age.

Oh... I'm also 48

What's the question ? ;)

😂 some people

As in?

no this doesnt have any acrylic in it its a alkyd paintsblended with water instead of solvent its a emulsified oil paint

you saw that Arroworthy classic brush.. dead.. and that was being washed out every 30mins to keep on to of it... still killed it.

maybe.. why do you say oil base better outside?

@@ProfessionalPainterDecorator If u lived in the north east of england near the coast ie Tynemouth water based glosses dont last 2 seconds the salt air destroys woodwork in second if u use a water based gloss

@@clintmannion5598 I ask, cus you find oil gloss still breaks down and peels/flakes. Waterbased, I wonder how the European countries manage who live in coastal areas as I think all Europe use water based... Tikkurila are a big company specialize in WB coatings for wood.

@@ProfessionalPainterDecorator What paint do you use on exterior woodwork

@@clintmannion5598 a mix. AllCoat exterior Tikkurila ultra classic Dulux exterior gloss... Water based and some oil. Sikkens Satura. Back in the day.. Sikkens BL Bedec Aqua Advance

have you a Paintwell near you. they sell nearly all the brands;)

I've stopped using Johnnos as they take the piss with their prices last and final straw was when they tried to charge me over £70 for 5l of aqua white gloss thats with trade account..same product at Brewers £48...so if I use Johnnos I get it from elsewhere

No idea