It's good to hear from someone else who has had a good experience with this replica. I've enjoyed mine and like you it's seen a lot of use. I hope it continues to do you proud in the field.

The Meu like you say is a great gbb pistol. Sounds like you got a great deal o it as well.

I love mine. Thanks, I'm glad your enjoying it. I hope you get some good gameplay with it.

It's certainly decent and like you it's one of my favourites. Glad to hear I'm not the only one who really likes it.

They are a nice looking replica I agree. I'm sorry to hear about the troubles you've had with the spare magazine. I know with this WE MEU I have both MEU style magazines and standard 1911 mags and they both work fine. I wonder if that is only something that becomes an issue with the army armament version, perhaps slightly different tolerance.

@@rockbottomairsoft I read in the magazine description that they're supposedly compatible with the R28 but it is likely that the grip of the gun would need filing at the front between the 2 grip panels. I've found that the spare Raven magazines though are identical to the stock one that came with the gun, so I think I will try those

If the Raven ones work then that will be good, their usually very affordable as well.

Shame one of the mags has failed. I'm glad to hear it's been good for drills though. Never had the opportunity to handle a firearm 1911, how does the replica compare? Is it a Faithfull replica?

@@rockbottomairsoft It is lighter than a smokeless gunpowder pistol. They may partially be attributed to the substantial weight of 7 rounds of 45 in the mag, as opposed to plastic BBs. Other than the takedown method for cleaning, it feels very similar. I use the same holster that my Springfield GI model 1911 came with.

@Ray Chapman Awesome, good to know that the dimensions are similar. Shame about the weight difference but like you say I suppose that is to be expected.

@@rockbottomairsoft I misspoke. My Springfield Armory 1911AI weight, empty of ammo, is almost identical weight of this airsoft replica.

Thanks, that's good to know. I guess they got it fair accurate.

Thanks for this. I will have a look at mine and see if it has the same issue. If so I will try this out and see if it solves my last round lock back issues as well. Hopefully this will help some others out as well.

@@rockbottomairsoft my pleasure and hope it helps. Btw, the inside notch of the slide stop might need a very very minimal filing so that it won't catch on the inside of the slide (file only if needed).

Thanks again. I will check it out.

Hi, I'm sorry to say I haven't tried an extended mag in it. I will have a look at the army armament one. I'm not completely sure if it's compatible but as it's tm compatible according to a few retailers I don't see why not. Would certainly help with gas issues being extended and a larger gas reservoir. If you get one before I get my hands on one let me know how you get on. Thanks I'm really glad you enjoyed it.

Hmmmm, that is an interesting one. I take it your having problems with the silver meu mag with extended base plate that came with the replica. I will be honest I've only encountered difficulties with that once and only with one particular bottle of green gas. I think nozzle lengths can vary for different brands of green gas. I've found no issues with most brands and you can fill as normal. If you struggling try a different bottle and see if that sorts it. My spare mags for this replica are standard 1911 for we and not meu ones. The only reason I did that is they are cheaper but another advantage is they aren't as fussy about green gas. I tend to use WE green gas or Nuprol and there nozzles will reach the fill valve on the MEU mags though. Hope this helps?

Hi. The green gas drum mags are certainly something I've considered in general. Haven't quite decided whether to get one for the 1911 or one of my g series. I don't currently own one but it's certainly something I fancy. I've had a go with a few on site and generally they were very good. When I get one it will definitely be on the channel. Is it something your considering? If you do get one let me know how you get on with it.

With the hop well set its got the potential for it. I don't tend to use it myself at those ranges but I've certainly hit a player at that range.

Thanks, I'm really glad you enjoyed the video. The 1911 in od looks great, liked that colour myself. It really depends on the day. If it's warm then you can get maybe 1 and a half to 2 mags of bb's from one fill. If its cold you might be unlucky and not get a full mag out of it before the gas runs out. A spare mag is well worth having for single stack mags(which these are). Hope this helps.

@@rockbottomairsoft ok thanks for the quick response im really looking forward to get it! Keep up the good work

No problem. I hope you enjoy it when it arrives.

Hi. I'm glad you enjoyed the video. To answer your question the double stack mags will not fit in this replica. This is due to them being 2 different pistols. Both here in the replica world and also firearms. The 1911 is a single stack mag. Hi capa replicas or firearms such as the 2011 use a double stack magazine. So the upshot is. If you want double stack mags but want 1911 styling/controls then get a hicapa. If you want a pure 1911 replica then you can get 1911's with a tactical rail. Hope this helps.

@@rockbottomairsoft i dont talk for the hi capa magazine please check army armament magazine for R29 model does this magazine will fit!

I apologise, I miss understood your question. In answer to your actual question then. The answer as far as I am aware is no. I've just checked out those R29 magazines, which as you've said are 1911 magazines. I've not tried them myself but as far as I can gather, the Army Armament is a TM clone. So it's mags will work in TM's, KJW's, etc. The WE 1911 is not an exact clone. Doing a little bit of digging on forums it appears that for that reason WE 1911's will only accept WE 1911 magazines. Hope this helps.

@@rockbottomairsoft i am thankful for your help! Wish you all the best!

Hi, this particular one is green gas so doesn't take co2. There are other options of 1911 replica though that are co2 and superb such as the ASG tac master. There is the option to buy co2 mags but I personally wouldn't run co2 in this particular pistol. Hope this helps.

@@rockbottomairsoft Thank's for the speedy reply. I just received mine today lol, and noticed that the magwell looks like it may take a c02 magazine? was worth asking someone who has had one for a while. I'll look in to the ASG tac master , thank's dude

No problem, the full name is the ASG STI Tac Master. Quite easy to get hold of normally and will certainly handle Co2. Affordable as well. Its on my list for the collection.

I've always liked the MEU variants. Like you say they have a military or toned down look about them while just being a little different from the standard 1911.

I would prefer if they ditched the WE logo on the grips and replaced them with the USMC eagle and globe instead.

Hi, there are certainly issues that can be had with this replica. I've had mine for approximately 3 years now. I've used it regularly in game through winter and summer. The only breakage I've had in that time was a broken loading nozzle. The part is very cheap and easy to replace. That happened about six months after I got it and I put it down to some heavy use in the field(dropped a few times). Since then I've had no other issues with it. The failures you see on various online communities could be down to a number of reasons. It could be bad luck and they get a bad one. It could be miss use. It could be due to poor maintenance. If you want it to last as long as it can, make sure you use good quality green gas, try to avoid red or black as that will put additional strain on it. Keep up with maintenence, clean and lubricate after every outing. That should keep it running for years to come. Hope this helps.

That helps very much thank you, especially about cleaning and lubricating. It seems like thats an often neglected thing people do. I am very gentle with my guns, I only use for plinking/target practice so fingers crossed! thanks for the help. Have you ever use the Umerex Glock G19X? Just got that one too

@@JMRabil675 I would love an umarex licensed G series. I have a g19x but mine is WE. You've got a nice replica there, I'm only slightly jealous, lol. But seriously from what I've seen they are a great pistol and have the advantage of full trades. Not had one myself but I would think it should shoot great.

That's me by the way responded on wrong account, hahahaha, apologies.

@@rockbottomairsoft hi. Just bought one myself, intend to color it. Just interested how's your MEU still holding up?

I'm not to sure on that one, however I doubt it. Sorry I can't be more help.

@@rockbottomairsoft no worries, you’ve been plenty of help

*the hop up doesn't make any big difference when it comes to range so is this normal and ok for an airsoft pistol or my hop up is broken?

I'm glad to hear your happy with your 1911. I love mine. Just like you I like the weight and feel of it. Feels like a quality replica. Range wise I've never really done much with mine as its primarily a secondary and used at close range, however there are things you can do to increase range. Sometimes though it can be as simple as it being new and the hop rubber just needs "warming" up and bedding in. Or the gas can be low if its cold.

The hop should definitely make a difference. I would see if it improves with a bit of use, a few bb's through it should wear it in a bit. If not and the hop still makes no difference then there could be an issue there. What weight are you trying to lift as well? Let me know how you get on. Hope this helps.

@@rockbottomairsoft thank you for the help, i use 0.25 bbs and also the hop up does make a little bit difference but not as much as my AR or sniper do .. i mean without hop up it can get to 10-15 m and with max hop up it gets to 25-30m ... Maybe it's normal for pistols as they shoot with 300 fps max or maybe as you said it needs some warm up idk

@@GigaChad-hn2xu Sounds like it just needs bedding in. The hop often will not be as effective as your long rifles. .25's is what I tend to use and get a similar range.

The only failure I had was the loading nozzle. Admittedly that failed fast. However replaced with an original we part, very cheap and easy to do and it's never let me down since.

@@rockbottomairsoft that sounds reasonable. I’m looking at this gun just to do occasional target shooting with, and maybe use it for the occasional game. As long as I don’t rough it up, and care for it properly, would you say it would last a long while?

Absolutely, I've had mine for about 5 years I think. I clean and oil it after every skirmish. It's had regular outdoor use in game and the loading nozzle is the only fault I have ever had with it. Still going strong just now and one of my favourite pistols.

@@rockbottomairsoft sounds reasonable. This gun is also much cheaper compared to brands like Tokyo marui, so I would probably get this just for the economical sense, as if I do need to replace it, I would have a much easier time

It's definitely an affordable option for a full metal 1911. The TM's are very snappy and certainly have some advantages but for me I prefer the WE.

With green gas I normally advise to have a bit of gas in the mag but not totally full. Full is better than empty though. With Co2 I would keep the mag empty. Hope this helps.

Thanks for the reply, I'm new and I've never owned a gun before.

No worries, I hope you enjoy it.

Hi, good question. As you may know the replica in this video is a 1911 and not a hicapa or in the real steel world a 2011 I believe. In airsoft there are a few differences, the main one being Hicapa's have a double stack mag and 1911's are single stack. So in a long winded way no, it's not a 5.1 as that is a Hicapa and this is a 1911. However some parts may very well be interchangeable. If your looking for a pistol project though I would recommend to skip this one and get some sort of Hicapa, they generally have better gas efficiency due to larger mags and hold more rounds. I hope this helps.

@@rockbottomairsoft alright thanks

No worries

Yes you can but you will need a thread adapter, something like this: www.patrolbase.co.uk/we-europe-we-pistol-thread-adapter It's worth noting though that suppressors on gbb pistols can negatively affect performance. I hope this helps.

Is the adapter you just linked the correct thread size for the gun in the video? Thanks

I haven't used it myself but I believe it is the correct size. 11mm internal thread to 14 mm ccw thread. This should allow fitment of most suppressors.

@@rockbottomairsoft Cool thanks for the info subbed

No worries at all and thanks.

Hi, thanks for the input. Others have mentioned this before. This is an earlier video, I have lowered the volume on later videos and for all future videos.

Hi, I'm sorry to hear your having trouble with yours. Well the first thing I would always say is get the retailer to sort it out. If you've only just got it I would send or take it back and have it replaced. However if this isn't an option for you then the first thing I would check would be the loading nozzle. When you remove the slide you will notice a plastic nozzle which can move. Directly beneath the nozzle and attached to it there is a protruding plastic piece. This pushes the bbs out of mag lips and up the ramp into the hop. If that piece of plastic has broken off you will need to replace the loading nozzle. Easy enough job and doesn't take long. Like I say though, if you've only just got it and it's failed on the first mag the retailer should sort it out for you. Hope this helps.