I’ve been waiting for someone to come out with a video on the tkx. I want to pull that trigger on my fox
@FoxcastMedia3 жыл бұрын
I 100% recommend it, unless you do a ton of highway driving where you need a 2nd overdrive
@BuzzLOLOL3 жыл бұрын
TKX is smaller oval shaped remniscent of the little T50 for small V8's, 6s, 4s...
@nothanks56523 жыл бұрын
I want to see them slamming gears on a 7k motor without proshifting, the tko 500/600 was a dud when it was released so I have my trust issues lol
@foxaholic42283 жыл бұрын
I live right out side of Knoxville, and I may have to go pay them a visit and buy a new TKX for my Fox, I had no idea they where in my back yard, Thanks Dude.
@mn12sc35th3 жыл бұрын
Dude, I'm right on the edge of Rockford and also had no idea.
@chrishenniker59443 жыл бұрын
I’d love to stick this behind a SRT-4 engine and drop it in a Hillman Minx or Austin 10.
@matstang19933 жыл бұрын
The TKX is a game changer. My tko600 is way to big and heavy. I miss the day of the T5s could bench those so easy compared to the GOT DANG TKO600 about killed me last clutch change
@NorthernPerformanceGroup3 жыл бұрын
I just pulled a Muscle thinking about pulling out my tko600 to change a clutch
@matstang19933 жыл бұрын
@@NorthernPerformanceGroup yep lol no doubt lol
@cobrabuilder93363 жыл бұрын
the TKO and TKX both weigh 105 lbs
@matstang19933 жыл бұрын
@@cobrabuilder9336 awesome
@NorthernPerformanceGroup3 жыл бұрын
@@cobrabuilder9336 the tko600 is 113 lbs
@KarlRidener3 жыл бұрын
I ordered a TKX transmission about 2 weeks ago for my foxbody and I can't wait to get it. I was googling for more info on it and this video sold me on the hydraulic clutch conversion too.
@Eddie510s Жыл бұрын
How do you like it so far ?
@riverrat4631 Жыл бұрын
Finally, I’m building a 1930 Ford 2 door Sedan Hot Rod with a Heidts stage 3 chassis. I’m running a built SBC. It’s hard to find the right clutch linkage to fit a Chevy bell housing in a 90yr old ford. This TKX with their hydraulic clutch kit is my answer. I need to call them to see if they carry the Wilwood floor mount clutch and brake pedal combo. I also want a steel bell housing for drag racing. Plus I need a taller shifter for a old flat floor hot rod. I need to call them and have them put a package together for my Model A Hot Rod. So glad I found this video. It’s a pain buying parts from a half dozen companies just to install a new transmission and not know if it will all work once you get it together. You always miss something. These guys have everything figured out before you get it. 🇺🇸🇺🇸🏁🏁🦅🦅
@mikelaumaillier9271 Жыл бұрын
Nice tour of the facility. Excellent customer service by SST. I'm in the process of installing a TKX in my Barracuda. Only downside is I have to wait until the snow is gone to try it out 😞. Thanks for the video. Best Regards - Mike
@jeremiahmauricio53773 жыл бұрын
I'll definitely be making a purchase in the next year!
@STREETFIGHTER503 жыл бұрын
Wow they have a really nice shop! My ‘68 Skylark’s TKO600 kit is from them 😁👍🏼
@HicksHouseVideos3 жыл бұрын
I need a TKX after watching this.
@PaulDaFox3 жыл бұрын
Great video, liked the side by side comparison of the trans and pretty kool to know about the manual pedal conversion!!
@garfieldsgarage3 жыл бұрын
Wow wow wow transmission paradise !! 😍
@FoxcastMedia3 жыл бұрын
I wanted to take them all home lol
@sespeedshop3 жыл бұрын
TKX is the jam!!
@henryros34323 жыл бұрын
Dropped your name today when I ordered my tkx from silver sport Transmissions. It’s on it’s way🤟🏻
@paulhudgins51203 жыл бұрын
Great job with the tour, these guys got it together, they have everything for manual needs.
@stephenjoy50213 жыл бұрын
I got the TKO600 from Liberty gear/modified “pro trans” with the 5.0 shifter.This is an awesome trans in my 72 chevelle.took some modifications to make the conversion but well worth it.If I ever do another I’ll probably go with the new TKX though!!!
@GearHead7043 жыл бұрын
Thinking of the TKX for my SSP
@f-bodyjon21893 жыл бұрын
Silver Sport is awesome! I bought their bellhousing for my ‘79 Trans Am...doing a LS1 mated to the original T10 4spd. I know they didn’t cover it but that Chevy LS bellhousing he mentioned in the video also has the new LT bolt pattern casted/drilled in. Crazy you can bolt a 60’s-70’s 4spd to a 2021 LT1/LT4 engine these days. Lightweight compared to a big 6spd transmission 🙌
@jaylongton3 жыл бұрын
Very informative and another great video!
@bigbird78383 жыл бұрын
I saw jay leno talking about these tkx !
@2003cobramustang3 жыл бұрын
Wow this place is awesome!
@NorCalMtnBiker863 жыл бұрын
This video sold me on SST for ordering my transmission
@godzillagarage7.33 жыл бұрын
Wow, that place is like adult Disney land!! I have my tkx on order can’t wait for it to arrive
@TimsInsanity3 жыл бұрын
Great info!!!
@thefoxchamber3 жыл бұрын
That was awesome!!
@bama_5.0513 жыл бұрын
Wow if I only had that kind of money there would be one in my fox lol.
@christopherp6893 жыл бұрын
I cancelled my TKX order with American Powertrain after seeing THIS VIDEO and how well organized and 1 stop shop they are. AP kept in tacking on shit, no organization, oh yeah, you'll also need this ($300 here). Oh yeah, I spaced it, you'll need this also, (300 there). Then I asked, what is this, the Mopar tax? He said yeah, Mopar tax. That didn't sit right with me, I then realized my estimates through silver sport we're going to my spam folder and I found the estimates, everything was pretty cut and dry as far as everything included to make it 100% bolt up kit, almost a hundred dollar difference minus driveline of course
@RJon20063 жыл бұрын
Wonder if I could get their manual pedal conversion kit to work with my Lincoln town car
@kyahama62843 жыл бұрын
To bad there all on Backorder hope they can start getting them faster
@shednesshunting25783 жыл бұрын
Wow this is great 👍😊 thanks for sharing
@FoxcastMedia3 жыл бұрын
Yes sir! TKX is a game changer
@shednesshunting25783 жыл бұрын
@@FoxcastMedia I sent you an email for help from Noah blake
@n2omike Жыл бұрын
Nice job with the tour! But, someone PLEASE give that guy trying to get in touch with his inner WWE wrestling persona a dang Snickers bar or something... LOL
@390fordgalaxie3 жыл бұрын
Just ordered 1 for my 65 mustang coupe
@NorthernPerformanceGroup3 жыл бұрын
I’m pissed I bought a new tko600 3 years ago
@williamlane63743 жыл бұрын
The TKO is a good trany if done wright. If ur running the stock shifter change it out for a good one and it will improve it substantially
@beverlytravia3894 Жыл бұрын
What about 1962 Chevy impala and shifter location
@beverlytravia3894 Жыл бұрын
See Ed
@juanrenteria89083 жыл бұрын
Would love to get ahold of a bad ass Trans to upgrade from my T45 in my 96 cobra.
@williamlane63743 жыл бұрын
All the SN95 cars have been covered for swaps also
@juanrenteria89083 жыл бұрын
@@williamlane6374 appreciate the info
@jonathanduke82953 жыл бұрын
Very cool
@VegasRT500 Жыл бұрын
I purchased one for my 1968 Mustang GT500 and I would buy one for my 1968 Charger but I heard you had to cut the transmission tunnel for it to fit so I wont be doing that mod unfortunately.
@rogerbennett20252 жыл бұрын
cool video been waiting for my stuff since august :-)
@graigorygilbert6023 жыл бұрын
GREAT VIDEO!
@LP-ok9rl3 жыл бұрын
THANK YOU SIR, for this video 👍🏼
@douglasfurlong13 ай бұрын
is there any way to put an air shifter on one of these units to be able to fit a straight sequential type shifter? Tremec should build a sequential transmission for drag racers..the h pattern just does not get it done!!
@ginomissana19773 жыл бұрын
Tremec TKX (600 lb/ft torque capacity/shifts like butter) = 125 lbs dry Super Astro A-5 (600 lb/ft torque capacity/shifts like butter) = 81 lbs dry
@s.hooper46833 жыл бұрын
It better be a great trans. Thats a $2,800.00 gadget!
@maxxmasson42633 жыл бұрын
this transmission is really the Legend 700 from a few years ago where the company went bankrupt ,it looks like Tremec bought them made some improvements and put their name on it
@thehawk053 жыл бұрын
Nope....it’s not. It might look similar in design principle but the TKX is completely new
@maxxmasson42633 жыл бұрын
@@thehawk05 yes its completely new but you cant deny how identical they look
@rustysnook746711 ай бұрын
It took them three tries to get mine right and it still doesn't work
@rdy2run3323 жыл бұрын
Does anyone know how the sst shifter is compared to the pro 5.0 for a tko600?
@williamlane63743 жыл бұрын
There is a video Caleb did with one. The video is called (Its A What) with a TKO600 in a red Cougar
@rdy2run3323 жыл бұрын
@@williamlane6374 really ok let me look for it.
@VernLeRoy1962 Жыл бұрын
if it fit without having to move the frame spport back 3", I'd have already ordered this for my 65 Musatng coupe, why does that top plate in front of the shifter, have to be so High as to interfer with the cross member support, Will this work with the factory Bellhousing?
@rr1226083 жыл бұрын
Hey Caleb! Which video shows the installation for the hydraulic clutch? Thanks in advance!
@drjotting3 жыл бұрын
Same question thanks
@rr1226083 жыл бұрын
@@drjotting I’ve only come across the McLeod hydraulic clutch. I wonder if there is a cheaper one. I’ve seen a universal kit on ebay, but I know better not to get it. 😂
@williamlane63743 жыл бұрын
SilverSport is working on a installation video of the coyote version.
@Stolencamaro Жыл бұрын
Did anyone put tkx into 1969 camaro does it need any cuting or is it straight fit thank you.
@JohnnyGMachine3 жыл бұрын
Just went on their site to buy the fox body pedal kit that works with the automatic pedals - says there's nothing for my car. Tried clicking through the store and many different ways to get to the product - doesn't come up. Would love to buy that kit today! 1991 Mustang LX 5.0 AOD car here - getting ready to swap to a manual.
@ryanwynne94922 жыл бұрын
Did you call them?
@dmh13673 жыл бұрын
Does this bolt up to a pushrod 5.0 and a coyote? Like to replace mine on my 306 but cpyote swap in the future.
@williamlane63743 жыл бұрын
To answer your question, yes
@N2Otorious3 жыл бұрын
2:51 Your "Experts" put the shifter on backwards.
@mn12sc35th3 жыл бұрын
The TKX has "cups" for the shifter in both the front and rear of the shift tower. It can be mounted in either orientation; what they show here is perfectly valid.
@N2Otorious3 жыл бұрын
@@mn12sc35th tell that to your hand and poor ergonomics, due to the shifter mounted 180 off..
@tulagi12 жыл бұрын
I was wondering if anyone else noticed! I guess not a lot of Mopar guys have viewed this.
@Shakerhood693 жыл бұрын
Awesome stuff
@ferdinandcuevas84573 жыл бұрын
How much power & torque will it handle ? Thanks👍
@williamlane63743 жыл бұрын
600lbs continuous
@coreybell95253 жыл бұрын
damn they skipped the 82-92 fbodies
@williamlane63743 жыл бұрын
Silver Sport has the transmissions for 82-2002 Fbodies 3rd and 4th gen
@garrettrush82433 жыл бұрын
Why is that shifter backwards
@williamlane63743 жыл бұрын
Different shifter positions for Different applications
@jesco68303 жыл бұрын
How does this compare to t56 magnum. Is the t56 still better? Smoother?
@jnng74633 жыл бұрын
how much does the code save you at SST -FOXSWAG
@rongerhardt97003 жыл бұрын
Thank you for awesome videos I'm new to the channel two weeks ago Friday my wife surprise me with a Foxbody my second one in 20 years I have the 4.6 is tired and leaking oil I guess it's coyote time please private message me or somehow I can get a list of what I really need I like to get an exact list if possible I know you're very busy but I appreciate all your help
@northerniltree Жыл бұрын
I ordered a trans last week. Today, UPS dropped off a dude dressed in drag. WTF!
@svtcobra6153 жыл бұрын
I have a 1998 cobra with the stock t45. Would the stock bell housing and drive shaft work with the tkx I wonder? Also I have BBK long tube headers would I need to take off 1 header when doing a clutch change with the tkx
@williamlane63743 жыл бұрын
The bell housing on a t45 is integrated to the transmission as part of its front cover so u would need to get a bell for the TKX and u should be able to use your stock drive shaft but change the front yoke that would be supplied in a TKX kit. And I wouldn't think you would need to rovove a header to replace the clutch
@79beans3473 жыл бұрын
I want that now, those are sooo freaking badass, hey caleb buy one and give it away in a drawing that would be awesome, its only money man you can make plenty more 😂🤣😂🚗💨💨💨💨 jk
@thereissomecoolstuff3 жыл бұрын
Sell your Nike shoe and hat collection.
@bigbertha4413 жыл бұрын
What's the price on the tkx??
@BuzzLOLOL3 жыл бұрын
If you have to ask you can't afford it...
@KarlRidener3 жыл бұрын
The transmission alone is about $2800 not including if it won't mate up to your bell housing. I had to get the bell housing, a different clutch disc (going from 10 spline to 26). Plus all the other goodies in the kit. All in all it costed around $3700
@KarlRidener3 жыл бұрын
@Frank Bonazza III my thought was buying gforce gears, rebuild kit and synchronizers for my busted transmission was gonna come close to that. Plus if I ever blow my 347 I'll switch to an LS and I can switch bellhousings and mount it right up to an LS.
@xtreme34843 жыл бұрын
Does that tkx come with the ring gear speedo for the 99-04 cars it doesn’t say on their website.
@williamlane63743 жыл бұрын
They except a speedo gear and also come with a speed sensor already equipped on the other side of the tail housing
@xtreme34843 жыл бұрын
@@williamlane6374 so what bell would I need for a 99 cobra.
@williamlane63743 жыл бұрын
99 cobra would use a modular bell housing for the TKX that has the same bolt pattern as the TKO
@xtreme34843 жыл бұрын
@@williamlane6374 but do they sell that with the kit or is it separate
@williamlane63743 жыл бұрын
The best answer i can give is to give Silver Sport a call and they would be able to tell you everything you would need so u can have a better idea for when ever you would be ready. The sales people are also tech people and they don't work on commission so there won't be any pressure, they are always happy to help out.
@drjotting3 жыл бұрын
Great video thanks man! Looking to put this trans in my Coyote swapped ‘93 Cobra build. Definitely would utilize this discount code. I don’t want to permanently modify the Cobra so I’m debating the hydraulic conversion. Any good links for that or I’d assume personal experience?
@williamlane63743 жыл бұрын
Silver sport is working on a how too video of how to install it and Caleb and Dover had installed one and loved the way they feel. There will be 2 vehicles at Ford Takeover to experience the feel
@alexgarza27593 жыл бұрын
Damit I want it. Jesus. That is sick. What kind of power can it hold
@williamlane63743 жыл бұрын
600lbs continuous
@MrFriedpork3 жыл бұрын
Not for nothing but I am I’m open to markets but why is it that are most popular transmission has a big stamp that says made in Mexico again nothing wrong but I’m just saying these transmissions are pretty expensive so what are we paying import tax
@jesco68303 жыл бұрын
Lol saw that too.. cheap labor
@taylorgtrotter3 жыл бұрын
I don’t see this trans lasting very long behind a big block with any tire that’s remotely sticky.
@drjotting3 жыл бұрын
Lots of factors there but I’ve gone 9s with a synchronized TK600
@taylorgtrotter3 жыл бұрын
@@drjotting weight of car? Power? Torque? Clutch set up? Tires? Just for discussions sake and educational purposes...
@drjotting3 жыл бұрын
‘91 Foxbody 427” SBF 88mm turbo 900lbft torque and a 325/50/15 MT ETStreet 3200#
@williamlane63743 жыл бұрын
If I was to guess by the looks of the construction the TKX may hold more than its current 600lb continues rating, since its new its safer to rate at a lower number till it proves its self in time
@grandspringdale15643 жыл бұрын
So does this mean the $2000 transmission I bought from LMR for my 91 LX with around 300 horse was a waste of money😧
@thehawk053 жыл бұрын
No The Super Duty T5s are a great trans. Everything depends on how you intend to use it. If you’re not drag launching , power shifting or running gummy tires the T5 will live happily behind a 500HP combo with zero issues. The TKX is an awesome trans but it does get expensive to convert to one on a Foxbody. It requires a new bell housing, clutch and driveshaft yoke to install it. You’re looking at around $3,300 going the cheapest route possible to install one. Had this dilemma myself as I was considering installing a TKX in my T-Bird. Unfortunately living in Canada the exchange rate, taxes and brokerage fees to purchase one and all the supporting parts I noted above meant I was looking at just shy of $5K CAD to do it. I ended up getting a new T5 and used the more than $2K CAD I saved to buy some other speed parts instead.
@grandspringdale15643 жыл бұрын
@@thehawk05 oh man that's reassuring. I just drive mine around regularly and might play a little bit, but over all I take care of her because I love her😎
@jerryb95913 жыл бұрын
Made in Mexico
@MrFriedpork3 жыл бұрын
Yep big stamp that says made in Mexico I didn’t know that it was in Mexican company🤔
@rhinevalleygarage3 жыл бұрын
Better than 🇨🇳
@jerryb95913 жыл бұрын
@@rhinevalleygarage probably has parts from China like many other things being made everyday, lol. But who cares it’s pretty cool regardless
@williamlane63743 жыл бұрын
Designed in the USA, just assembled in Mexico
@toddedwards53733 жыл бұрын
The TV or device you are watching this on isn't made in America either .... so
@dennis171162 жыл бұрын
6r80 with a stall will destroy any manual at a cheaper cost.
@bigbertha4413 жыл бұрын
Need a 6 speed to replace this BS mt82 in my 2015
@williamlane63743 жыл бұрын
You will need the Magnum XL which is carried in stock with the necessary hardware for a smooth swap
@efraingomez66303 жыл бұрын
Boxes are stamped Made in Mexico!!! Wtf
@3pedalfox3 жыл бұрын
.68 5th 👎
@georgeshotrodbarn21133 жыл бұрын
It looks like a Ford junk yard
@jaivette Жыл бұрын
Shifter on backwards???
@gregorykern96799 ай бұрын
I saw Fords in the lot outside and tuned out. No thanks...