Weathering a 3D Printed Model (AMX-50, Resinscales 1/35)

Рет қаралды 88,729

2 жыл бұрын

My friends, tonight we'll apply some pin washes, chipping, rust tones and other tasty stuff over this 3D printed tank model. Are the print layers gonna be an issue?
Patreon: / nightshiftmodeller
AMX-50 Construction: • The Most Impressive Re...
Post-shading: • Cranking Up The Post-S...
Enjoying this type of content? Well, if you're new here, then don't be shy to subscribe and maybe even turn on notifications because I keep posting stuff like this every week!
Disclaimer: Most of the weathering products I use in my videos such as Ammo by Mig Jimenez, AK-Interactive, Wilder and VMS were sent to me for free, but with no obligations to promote them. I received a lot of them a long time ago, even before I started this channel. VMS is also one of my Patreon supporters. Being independent from big and exclusive sponsorship deals and showing you a wide variety of different brands and products was one of the founding ideas of this channel and I will always stand by this.
Music: Quincas Moreira - Scratch the Itch - KZfaq Audio Library

Пікірлер: 154

@dragonfusilier9173 2 жыл бұрын

It would be interesting if you made a range target model. Just go wild with rust and shell penetration effects

@risingsun9595 2 жыл бұрын

Those models are always nice to look at and great practice for ricochets and penetrations

@InsufficientGravitas 2 жыл бұрын

Or it could be a disabled and then abandoned tank

@michaeldicostanzo3652 Жыл бұрын

You predicted it!

@berlin_actual 2 жыл бұрын

I have reached levels of happiness I cannot express, Karl Sternau and Night Shift have uploaded! Keep up the good work, I am currently unable to model but, I hope I can continue soon!

@shadow_entity9191 2 жыл бұрын

Still blown away with how dedicated you are. It's great to see a model 'grow', getting more interesting and detailed. The only thing I do that comes close to 'modeling' is creating my own vehicles from Lego bricks. I have no connection to the type of modeling you showcase on your channel but your videos always make my day. You make these videos in way that just sucks you in. You're amazing in what you do and the way you explain what you're doing on specific parts of a model and what paints or materials you use makes me feel like listening to an interesting and engaging lecture. And you're making tank models which is just great!

@matthayward7889 2 жыл бұрын

11:30 that .50 cal looks amazing for a one piece print (plus barrel). I’m genuinely impressed!

@harlech2 2 жыл бұрын

"MAH-FRENS!!!" Glad to see someone is making a kit of this beefy boy, and I can't think of a better person to make a video series giving it the treatment.

@conwayplays6610 2 жыл бұрын

Excited as my Kranvagn kit from Resinscales just came in yesterday!

@NightShiftScaleModels 2 жыл бұрын

Sweet!!!

@andrewengel3023 2 жыл бұрын

one recommendation I have is that you can go even more overboard with the chipping in areas where the crew will walk on the tank, speaking from experience, the paint in those areas tends to chip a fair bit in real life, or even on handles, and areas where maintenance hatches would swing into

@TheHonyak 2 жыл бұрын

Just a couple notes from an old tank commander..... 1: that Browning M2 , .50 cal HMG was Parkerized, a light/medium grey flat finished rustproofing. Check the internet for parkrized color. ( the barrel, was often darker due to heat discolorization) 2: that object on the rear turret roof is the tripod for deploying that .50 cal in a ground-mounted mode.....and would be the same parkerized grey.

@jarlvalbjorn 2 жыл бұрын

I loaded up this video just to reference your intro and before I knew it, the video was over and I realized I watched the whole thing like a kid glued to his favorite cartoon. You have a real talent, my friend.

@SmallSoldier 2 жыл бұрын

Always a pleasure to watch you work Martin! KUTGW. 🍻

@yin-cheungwong5024 2 жыл бұрын

The mottling works great on hiding those unwanted micro texture created by 3D printing

@loupiscanis9449 2 жыл бұрын

Thank you , Uncle Martin . 🐺

@R.A.V.E.Design 2 жыл бұрын

Превосходный результат, уже жду следующей пятницы!

@cravinghibiscus7901 2 жыл бұрын

This tank is really growing on me

@andrewkistler3630 2 жыл бұрын

That 50 cal is so nice. It should be sold separately as an aftermarket piece

@jacobakana5649 2 жыл бұрын

I absolutely love the lines on this tank! Between the dark airbrushing and now oil washes on the panel lines, this can not be beat! Great job, I can’t wait for the next one!

@roadweary5252 2 жыл бұрын

Your worst build will always be better than my best one, mah friend! Looking forward to next week!

@TheHonyak 2 жыл бұрын

3: rust on pioneer tools was “Verbotten” by the battalion sergeant major who would inspect and cause you to spray-can paint all metal parts OD green. 4: those straps holding the tools, jerrycans, etc. in place we’re Not leather, they were a woven cotton olive drab canvas mesh that faded to a pale green with black metal hardware. Hope this helps for historical accuracy from someone who was there. And yeah, you’re doing Awesome work!!

@wetwildwendy 2 жыл бұрын

I've 3d printed a tank and I'm painting it with all the knowledge I've got from watching your channel. Its looking not bad :) and im learning so much! Love the channel!

@cristianopersi7953 2 жыл бұрын

Incredible how the adding of darker color changes the chipping magically. Wow

@sheawelch7276 2 жыл бұрын

good to have you back night shift

@flightlinemedia 2 жыл бұрын

Nice work as usual Night Shift. 3D printing is going to bring us some really exciting subjects.

@olivercooney6645 2 жыл бұрын

It's great to see you work away on a kit you explaine everything it a very logical understanding way to follow builders alike not everyone one does that because not everyone has the ability it commonly known as being watchable everyone be happy take care everyone

@Tharringbone 2 жыл бұрын

I really like the term “My even more favorite.” Thanks for always amusing me

@enhance4442 2 жыл бұрын

I love it ❤️, I love your videos, much appreciation for making Fridays an even better day.

@Jeffsmodelgarage 2 жыл бұрын

You make weathering look easy Martin lol I’m learning thanks for the video my friend model on!

@YouOnlyIiveTwice 2 жыл бұрын

Bro, your videos always are what I look forward to after coming home from work on Fridays. The level of talent you have makes your channel one of the best on KZfaq for model making. Keep up the fantastic work, my dude!

@pixelazer7925 2 жыл бұрын

I love your work! Especially on this tank, it inspired me to pick up an AMX-13 kit of my own.

@fulcrumR6 2 жыл бұрын

so glad i found this channel

@randomtougeenjoyer1095 2 жыл бұрын

Great job! Keep up the great work and happy modelling ^^

@NightShiftScaleModels 2 жыл бұрын

Cheers!

@SPSteve 2 жыл бұрын

Martin, I wasn't too excited about this subject when you first started, but it has really turned out amazing. Your beautiful art work is inspirational!

@OzScalemodeling 2 жыл бұрын

The detail and your patience amazes me. Love your videos 👍🇭🇲

@joramzieltjens7012 2 жыл бұрын

I just want to say that I really enjoy your work, and that your videos are really helpful for me and that watching a new episode always makes my (fri)day!

@notnubilous3804 2 жыл бұрын

As someone who also doesn't really like using traditional acrylic metalics, I've REALLY been enjoying AK's True Metal line. Very very easy to get a more natural weathered metalic look when you can easily blend oils into them.

@evernightcreations 2 жыл бұрын

I love your artwork so much! Thank you for creating and sharing your work!

@skelenton92 2 жыл бұрын

Uncle Night Shift, I just wanted to say that your outro is a great motivator. Keep building models, don't just collect them! I've had a 1/350 Bismarck with full PE that I've been working on on&off since June, and I finally finished building the damn thing today. Still got painting left, of course, and the rigging on it seems like a whole 'nother challenge, but that outro was part of what kept pushing me to keep working through it.

@lesthiele4921 2 жыл бұрын

Hey Uncle the AMX 50, was absolutely outstanding, weathered must perfectly, and it looked to be a beast, hope you and your family are keeping safe and well, best regards from Australia.

@BRUHM0M3NT. 2 жыл бұрын

Amx 50 b is my favourite tank in wotb

@Ethan-kp4vz 2 жыл бұрын

Your work is great!

@tresn3830 2 жыл бұрын

Hey, Martin, just want to thank you for these vids. I'm not a modeller myself but even as an artist these videos are surprisingly educational, useful and entertaining. Greetings from Hungary!

@johnnybrown7644 2 жыл бұрын

I love watching you try and mix up the series of techniques. I would love to see a oil dot filter after you pin wash to see it react with the extreme post shading. Plus I haven't seen you do one for a while!

@NightShiftScaleModels 2 жыл бұрын

That's one of the advantages of post-shading: you don't need oil dots! :) In fact, they can completely ruin the shading

@joshuahoffmann2913 2 жыл бұрын

Love your work it has inspired me to make all of my models look better

@mawgantalling9511 2 жыл бұрын

Highlight of my week right here

@stephanmotzek779 2 жыл бұрын

Thank you ist so good to watch you und listen to ideas

@tomtruesdale6901 2 жыл бұрын

Very nice job there.

@EricElwellArt 2 жыл бұрын

Love it! Can't wait for the dirt/dust effects

@harrygreene8669 2 жыл бұрын

I'm following this approach on my 3d printed KV-1. Can't wait to see how yours goes

@graemebrumfitt6668 2 жыл бұрын

I like Unc, like you say you just got to try new things every now and again! TFS, GB :)

@JedenSiedemDwa 2 жыл бұрын

Your precision is totally extreme. You are a scalemodelling phenom. All the best for You! ;)

@beaverdam1199 2 жыл бұрын

Amazing work my friend! I am currently weathering my Marder 3 that’s sat in the shed for 4 years. I painted it with my New airbrush a couple of weeks ago and couldn’t decide on what camouflage I should use so I went with a winter base coat and outlined it with a flat black in small and large doses whilst also shading the blacks and whites. I find that Vallejos light rust when watered down makes an excellent rust wash when used in small doses. I picked up a among the other day and will begin chipping in a few hours. Lovely work as always night shift, can’t wait to see this massive green frog fully completed.

@lavawolf666 2 жыл бұрын

at the back of the turret there is some big layer mark, you can fix em before painting with, sanding, some heavy primer and a litttle bit of sanding, or diluted puty, but your metal efect wih puty solve it in prety much the rest of the figure , awesome job like allways

@StruggleDuck 2 жыл бұрын

One day you should totally stream yourself doing part of a model, it would be awesome!

@petermgruhn 2 жыл бұрын

The heavy metal awesomeness looks legit.

@bigroryhollar5023 2 жыл бұрын

Looks outstanding......😎

@railflaye 2 жыл бұрын

For me you are the best modeler on KZfaq !!

@zebradude4562 2 жыл бұрын

Wow what a good model, wish i could make a model half as good as that 🤣

@THROTTLEPOWER 2 жыл бұрын

Great vid Great work! 👍👍👍

@Modkits131 2 жыл бұрын

Those rust and silver chips 🤤 soooo good. 👌

@od1452 2 жыл бұрын

Love that 50 cal.

@hungryhedgehog4201 2 жыл бұрын

I really like the cast effect on this one

@schweikces 2 жыл бұрын

Great video!!!

@milannes1574 2 жыл бұрын

Naprostá paráda jako vždy a velká inspirace .... už vím co zkusím na novém Cromwellovi :-d, díky

@user-yf8zj1wh5c 2 жыл бұрын

Как всегда велликолепно! Мастеру 👏👏👏👏👏👍

@chriswashere 2 жыл бұрын

for the gear next time...mix your grey paint with some metalic paint I believe you will find it interesting

@AvoidingtheQuestion 2 жыл бұрын

I know its kind of below your pay grade, but I feel like itd be really cool to see you apply all these amazing techniques you use for tanks on a Warhammer 40k tank. If you're ever looking for video ideas!

@stephenbridges2791 2 жыл бұрын

Nice effects. I tend to use Tamiya Dark Iron for the metal portion of pioneer tools. Then similar weathering on top of that. I enjoy new ideas, though.

@ModeliteDiorama 2 жыл бұрын

Very helpful video, as always :)

@laneevans2481 2 жыл бұрын

Another video another batch of stuff for me to try on my models (of course not even close to as good)! Keep up the great content uncle! :D

@anonymous5810 2 жыл бұрын

I sense a ‘what if’ diorama coming up

@corsair371 2 жыл бұрын

Super cool .I tend to do minimalist weathering, otherwise I ended not liking the end result

@BewilderedBearMiniatures 2 жыл бұрын

You just made my day!

@s.e.a.lthefurious8701 2 жыл бұрын

Night shift, I have a request. Can you do "budget" chipping and rust? I use acrylic paints from tubes and don't have sprayer. So naturally I do all painting with brushes. I do have thinners and paint coats, but no fancy stuff that I would need. And how do I do rust on panzer ausf. E? What colour should I paint before panzer-grey?

@steeliron8246 2 жыл бұрын

Amazing

@digitalspacestudio3956 2 жыл бұрын

amazing! i am your fan!

@overcats5539 2 жыл бұрын

Satisfying nights

@TeoAnimations 2 жыл бұрын

Once you said that you will probably remake the Yugo-war T-34. If yes, please say when and what to expect :) Greetings!

@ferdyahern4355 2 жыл бұрын

If you need a silver colour that actually works and looks good I can highly recommend the Vallejo metal colour range, the pains look great and are pretty easy to use, however they are very fragile and need to be varnished after applying. Honestly there paints changed the way I make models, give them a shot!

@niveleur 2 жыл бұрын

So I'm a welder, I stare at welds all day. This isn't meant to be a "well you're wrong it should be X-Y-Z" comment, but honestly I've never seen a weld stay shiny very long after you get done welding it. They usually end up just turning gray. Usually start rusting a couple hours or so after being in open air. But it's your model, and you're more than welcome to take whatever creative liberties you please.

@crazywarriorscatfan9061 2 жыл бұрын

Nice!

@silverdragontm9548 2 жыл бұрын

Well, at first, as always, awesome job! But seriously, the only place where you can truly spot the printing layers is the back plate on the turret, right? Most of the rest probably got covered up by textures and multiple paint layers.

@NightShiftScaleModels 2 жыл бұрын

they're also noticeable on the fenders, engine deck and turret roof. Luckily, you can deceive the eye by using paints and varnishes - not by flooding the surface and thus filling the texture, but making it less obvious

@darkwood777 2 жыл бұрын

Yes Life is too short for 70 hour chipping sessions.

@Kuba.G 2 жыл бұрын

I'm extra early today boys love the vids bro

@jerryvolpini7987 2 жыл бұрын

Amazing work! Sorry but not a big fan of the post-shading but we will see how it looks after it's 'dirtied up', even if you do go light on the effect. Always look forward to your videos, keep up the great work 👍

@user-ir9hw2ou2c 2 жыл бұрын

Beauty

@SlavaUkraini345 2 жыл бұрын

I love this channel and watching these things come together. I only have a small request. could you do something more modern like late cold war/modern day. I like that era a lot. I would love if you did the 2S6 Tunguska personally. but anything in that era would be cool.

@highjumpstudios2384 2 жыл бұрын

Nobody: Night shift: TECKSTURE

@jamesgordley5000 2 жыл бұрын

What if (with a future model) you used the airbrush port-shading on panel lines, but *not* on any of the panel lines that cover horizontal upper (direct sun illuminated) surfaces?

@Dino_man387 2 жыл бұрын

Nice

@hanssmidt12 2 жыл бұрын

Its friday again!

@user-zj8kc8qn5e 2 жыл бұрын

Very interesting. Fire away!

@carloshnunez 2 жыл бұрын

Great job 🔵🔵🔵👍👍👍😀😀😀🔵🔵🔵

@CWModelling 2 жыл бұрын

Beautiful work as always Martin 👍......can I ask where the holder/stand for the tank comes from? TIA 👍

@MF-og1ct 2 жыл бұрын

Here in the first hour yet again. Thanks again for a fantastic video on modelling. I like this over the top style. Have you ever tried using India Ink on a model?

@thelittlefox1892 2 жыл бұрын

Amazing work But i have a question Can i use humbrol sculping filler with cement glue as you do with tamiya putty?

@cosmicmousse 2 жыл бұрын

I think tools and cables look better with grey because they don't get polished like the track parts do. I'd like to see them done with a metallic paint, if only once.

@alanmoffat4454 2 жыл бұрын

STILL WATCHING STILL LEARNING WHAT ABOUT YOU THATS WHY WE STAY HERE.

@russouk 2 жыл бұрын

Nothing wrong with lumpy sponge chips...chips are never flat theres always usually have edges sticking up, peeling off etc...hard to simulate but as you say looks cool

@patrik-4163 2 жыл бұрын

Looks very dope, can't wait for the finished product... Can I buy it from you please? 😇

@Y-vidios 2 жыл бұрын

Я хоть и из России речь не понимаю, но смотрю, уникальный контент, которого нет на русском ютубе

@DEbANTARES 2 жыл бұрын

Да и без перевода всё понятно. Все краски и химия подписаны, все шаги показаны.

@markandric9305 2 жыл бұрын

Dear Night shift I have an idea/challenge for your next diorama. Could you make another what if diorama which includes a knocked out serman and a passing tiger1. I think this would be a great challenge you you and the tank models in the future