WEATHERING And RIGGING The Nieuport XVII by Copper State Models!

Рет қаралды 22,975

Күн бұрын

The Nieuport XVII (Late Version) by Copper State Models is a beautiful scale model kit in 1/32. If you want to see it being built step-by-step with cringy commentary and subpar camera work - look no further.
This is the third part of a 4-part series and in this part we are mainly focussing on the weathering and rigging. Some subassemblies will also be tackled. The last part will feature the pilot figurines, and a scenic base so stay tuned and subscribe.
Mike Rinaldi / Rinaldi Studio Press: / rinaldistudiopress
00:00 Preview & Intro
00:35 Decal Weathering
04:00 Fuselage Weathering
08:22 Detail Assembly Part 1
08:41 Rigging The Rudder
09:45 Rigging The Wings Part 1
10:54 Painting Oil Stains
12:25 Rigging The Wings Part 2
14:07 Landing Gear
14:56 Pigment Work
15:37 Detail Assembly Part 2
16:08 Final Presentation

Пікірлер: 111

@lpjmodels 2 жыл бұрын

Bravo, great work man, that silver scheme is glorious and the weathering really ties it together. I need to get me some more oil colours 😆

@TheAlleyman 2 жыл бұрын

Thank you, one can never have enough oil colors even though the engine grease is good for tons of stuff

@nonamesplease6288 2 жыл бұрын

I subscribed to Alleyman after you recent introduced us to him with his last Neuport video. Thanks for the introduction. Alleman has a great channel!

@TheAlleyman 2 жыл бұрын

Thanks man, your support is well appreciated

@joetowsey2898 3 ай бұрын

Beautiful.

@TheAlleyman 9 күн бұрын

Thank you!

@michaelrosella Ай бұрын

Great work

@TheAlleyman 9 күн бұрын

Thank you! Cheers!

@brianstarr1272 2 жыл бұрын

Love to see another modeler producing great models and great videos! Really well shot and produced, and the voiceover is helpfully instructive. You’ve done a great job with this kit and I look forward to your final installment!

@TheAlleyman 2 жыл бұрын

Thanks so much for your feedback, Brian. I'm really glad you enjoyed the video since I tried really hard to improve the video and audio quality over the first three vids.

@ExplicitPublishing Жыл бұрын

I am not a modeler, but this channel is amazing--the craftsmanship! Thx for sharing.

@TheAlleyman Жыл бұрын

Thanks a lot, that's really encouraging to hear. And it's never too late to start modelling ;)

@hissycatbuilds Жыл бұрын

I am really loving your videos and builds. =)

@fjramsay1234 Жыл бұрын

Your videos are really great, and (In my option) WWI is the best subject for scale models! can't wait to see what comes next!

@TheAlleyman Жыл бұрын

Thanks so much for your positive feedback! I'm currently in some kind of summer break but will be back soon :)

@cchristner Жыл бұрын

Is it even possible to learn too much about aluminum paints?? Another fascinating video.

@TheAlleyman Жыл бұрын

Thanks again! Not sure about aluminum paint, during the build I was pretty fed up with it but now I think I agree that there's never too much

@jasonlee6744 Жыл бұрын

Absolutely loved it, done great tips, thank you xx

@TheAlleyman Жыл бұрын

Thanks a lot glad you liked it

@scale_history5584 2 жыл бұрын

Absolutely brilliant! Turned out beautifully

@TheAlleyman 2 жыл бұрын

Thanks mate, well appreciated!

@Andrew-se4tg 2 жыл бұрын

Love your channel man! More people should cover ww1!👍

@TheAlleyman 2 жыл бұрын

Thanks man, yes WW1 definitely deserves some more love!

@vitoscaletta3886 10 ай бұрын

Like you showed, WW1 planes are one of the most demanding model types!

@johnalecsscalemodeling 2 жыл бұрын

That turned out so amazing! Great video you make them really interesting. End model/reveal is excellent - cheers!

@TheAlleyman 2 жыл бұрын

Thanks a lot John. Glad you enjoyed it, cheers to you as well !

@pwissink1 2 жыл бұрын

Wow. Beautiful!

@TheAlleyman 2 жыл бұрын

Thanks Peter 😊

@severedirkitis 2 жыл бұрын

Outstanding!! Your work is super, and you do a superb effort with your voiceover descriptions. They are detailed enough to inform the viewer exactly what you are doing and why, along with good camera work showing exactly what you are describing. Keep up the great work, and I look forward to the next video and your next project.

@TheAlleyman 2 жыл бұрын

Thanks a lot Kevin, that's very encouraging to hear. Great to have you aboard for the next vid :)

@SteveT-0 6 ай бұрын

Wow, that is amazing!

@TheAlleyman 6 ай бұрын

Thanks Gary :)

@verbraucherschutzerin6311 2 жыл бұрын

Such great love of detail, sooooo historically informative. And also, dear Alleyman, you and "your good friend, Mr Hairdryer", are probably the funniest people I know :-)))

@TheAlleyman 2 жыл бұрын

Thanks a lot, doing my best

@markfrommontana 2 жыл бұрын

Brilliantly executed. I'm really looking forward to seeing this Nieuport with the promised pilot figure. Well done!!!

@TheAlleyman 2 жыл бұрын

Thanks Mark, I'm hanging in on the pilot and the base!.

@typhoon2827 Жыл бұрын

Wonderful 👏🏻👏🏻

@TheAlleyman Жыл бұрын

Thanks 🤗

@julieseverin4716 2 жыл бұрын

I like the laxative fact 🤣

@TheAlleyman 2 жыл бұрын

I'm not sure if it's really true. With respect to the pilots I somehow hope it's just a myth...

@tomcarrington1086 9 ай бұрын

This is excellent, some great tips... Ive subscribed so will be looking out for more. Thanks

@TheAlleyman 9 ай бұрын

Thanks a lot! My upload schedule is as irregular as it gets but I will push out some new content eventually

@johnhughes8563 Жыл бұрын

Very well done.

@TheAlleyman Жыл бұрын

Thanks a lot :)

@lynnostler639 2 жыл бұрын

Well, I have to say that this build is beautiful. I would really hope that my kit of this aircraft will look a little like what you have done here. Your work is very detailed and seems to portray the aircraft with a very realistic look. I love your work on this kit. You have given me the desire to try my kit. Thank you very much.

@TheAlleyman 2 жыл бұрын

Thank you Lynn. It's great to hear that you could take a few things from my build video. I hope you will enjoy the CSM Nieuport as much as I did. All the best!

@joesanchez979 2 жыл бұрын

Great detailing 🙂

@TheAlleyman 2 жыл бұрын

Thank you 😊

@judithhamilton5393 2 жыл бұрын

First time on your channel.Amazing build!

@TheAlleyman 2 жыл бұрын

Thanks Judith, hope to see you back for the upcoming videos!

@steggles667 Жыл бұрын

Great skills and very well made video, thank you for sharing! If I could manage to be half as good as you, I’d have some fantastic models. Your builds are exceptional! Peace & greetings from Australia.

@TheAlleyman 11 ай бұрын

Just take your time, it's no rocket science and you can get there !

@stanbrown915 Жыл бұрын

The oil is a laxative and it smelled awful when burned. A fantastic book that covers WW1 fighters and pilots is Dan Hamptons Lord's of the sky...excellent book, the WW1 section is almost half the book.

@TheAlleyman Жыл бұрын

Need to add that to my Amazon stash :)

@davidblotsky9025 3 ай бұрын

That was greaat

@TheAlleyman 9 күн бұрын

Thank you

@lpjmodels 2 жыл бұрын

First ! Been looking forward to this. Let's goo

@TheAlleyman 2 жыл бұрын

Wow dude you're fast, hope the HD version is up already :D

@lpjmodels 2 жыл бұрын

One thing I used to do was upload as unlisted until processing was complete. The time of processing is very inconsistent on the youtube end. I'll be rewatching in the week anyway for HD goodness

@TheAlleyman 2 жыл бұрын

@@lpjmodels Lesson well learned :)

@seanfoster3052 2 жыл бұрын

Incredible work on this beautiful model of an often overlooked subject like WW1 French aircraft which were for some reason ignored by Wingnut wings

@TheAlleyman 2 жыл бұрын

Thanks Sean! And yes, Wingnut Wings for some reason had no love for French aircraft but Copper State Models perfectly filled that gap (+ the gap that WNW left in the market :)

@patrickehresmann2404 Жыл бұрын

For some reason, WW1 French aircraft were ignored by Wingnut wings? This reason has a name. It is called French bashing. A certain propaganda remains in the Anglosaxon world that only them fought the Germans during both world wars. The truth is quite different. Just compare death toll numbers. Besides, the heart of these wars did not take place on Anglosaxon ground, which infrastructures were little affected, compared to France.

@davidmccann9811 3 ай бұрын

I love WW1 aircraft, but the rigging always puts me off.

@TheAlleyman 9 күн бұрын

Give it a try with elastic strings and without turnbuckles. It's more convenient and looks great as well

@francispare1310 2 жыл бұрын

really nice series of videos ! hope you get more subscribers fast and post more videos

@TheAlleyman 2 жыл бұрын

Thanks Francis! I can't influence the subscriber part but I will definitely post more videos :)

@davidmay5612 2 жыл бұрын

Such a lovely build. An excellent example on the understated use of oils and their application. As for a suggestion for your next build, how about CSM cauldron G3, I bet you have one in your stash!

@TheAlleyman 2 жыл бұрын

You bet right, David :) I will definitely build it and do a video in the near future.

@lpjmodels 2 жыл бұрын

I second the G3. I have one and it looks amazing. Can't get round to it just yet tho

@TheAlleyman 2 жыл бұрын

I was planning to squeeze in something non-aircraft first to detox a bit from rigging but then again the kit seems to be really exceptional....

@lpjmodels 2 жыл бұрын

@@TheAlleyman I understand that. It's pretty much 100% rigging. Shame the fahrpanzer isn't out yet. That would be amazing to see

@TheAlleyman 2 жыл бұрын

@@lpjmodels yes this one looks really surreal. They've been adding so much cool stuff to their catalog lately

@stevebaker1514 Жыл бұрын

Nice detail! Request for your next build: Halberstadt 2-seater. Cheers!

@TheAlleyman Жыл бұрын

Hi Steve, thanks for your feedback. Unfortunately I built the Halberstadt already prior to my KZfaq time. I have some photos on my Instagram though and a quite detailed build blog on a forum (it's in German though). If it's interesting for you I can send you a link.

@TheAlleyman Жыл бұрын

Here's the link. As said in German but with a lot of progress pictures: www.wettringer-modellbauforum.de/forum/index.php?page=Thread&threadID=71520

@Zorglub1966 Жыл бұрын

Castor beans oil was indeed both a laxative (grandmother's remedy) and a lubricant for engines in the early 20th century

@TheAlleyman Жыл бұрын

Yes, it's super interesting. On another note, I hope one day I will be mature enough to not make jokes about this

@Zorglub1966 Жыл бұрын

@@TheAlleyman I forgot to mention that this oil is still used for 2 strokes racing engines, RC models engines etc..

@TheAlleyman 2 жыл бұрын

Hey guys, I'm currently planning on my next model project. If there's any WW1 subject you'd really love to see - airplane, armor or ship - let me know in the comments!

@Andrew-se4tg 2 жыл бұрын

I love all vehicles however, a ship or sub would be great!👍

@TheAlleyman 2 жыл бұрын

@@Andrew-se4tg noted :) Between sub and ship I'm leaning more towards the latter because I only have one WW1 sub and it's huuuuge 😅

@Andrew-se4tg 2 жыл бұрын

@@TheAlleyman oh yeah, das werk u9 I think...👍

@TheAlleyman 2 жыл бұрын

@@Andrew-se4tg yes the choice is quite limited 😅 I will build it one day though.

@garrygilbert4635 9 күн бұрын

Rotary engines slung caster oil all over the belly and lower surface of the wing. And yes it cam loosen you up. old rhinebeck aerodrome in up state NY has WW1 aircraft they fly in a vaudvill era air show. You can see Fokkers Sopwiths Nieuports albatrosses. Most with original engines.

@simonleach6632 2 жыл бұрын

you sir, must have the patience of a saint with all that ringing and the fiddley turn buckles, it really shows well in the finished model as well, it's absolutely stunning! For the next subject why not mix it up a bit but within the same ballpark? maybe a 'pusher' type aircraft like the Airco DH2 or the Vickers FB5 if the kits actually exist that is, I'm not too sure...

@TheAlleyman 2 жыл бұрын

Thanks a lot Simon, ironically outside of modelling I'm rather impatient.

@robertdezwaan3058 Жыл бұрын

I'm especially interested in WW1. I wish there were more artillery models.

@TheAlleyman Жыл бұрын

Noted 😉 I have two artillery guns in my stash. Thanks for your feedback

@waltermoore1399 2 жыл бұрын

Excellent work! Have you tried the WNW Salmson 2A2?

@TheAlleyman 2 жыл бұрын

Thanks, Walter. I still have a couple of WNW kits but unfortunately the Salmson is not amongst them. Did you build it?

@01boian Жыл бұрын

I think that the metalpart in the lower section below the cockpit is a fotstep, not a handle for groundcrew.

@TheAlleyman Жыл бұрын

That would make quite a lot of sense!

@01boian Жыл бұрын

@@TheAlleyman to be able to climb into the aircraft. Anyway beautiful build You make!

@TheAlleyman Жыл бұрын

@@01boian thanks :)

@rOEN911 2 жыл бұрын

very nice job i like you making CCP models kits the final model is super ,if you want my opinion about your videos you need to buy a nice lighting so are more bright ...again nothing that important but i think will be better !

@TheAlleyman 2 жыл бұрын

Thanks, that's great feedback since I'm really trying to up the video quality!

@richardbreisch8049 2 жыл бұрын

You've got the barrel on the machine gun at the top, its supposed to be at the bottom... That is why the blast shroud is at the bottom. 8:40

@TheAlleyman 2 жыл бұрын

Hi Richard, no worries the shroud is around the barrel. There are two "barrel-like" extensions coming from the cooling jacket (the lower one being the barrel itself). You can see it quite clearly in the second part of the video series when I am painting the gun.

@xxmonsterxx9363 2 жыл бұрын

Did you put matt varnish on rest on the plane before you start weathering?

@TheAlleyman 2 жыл бұрын

Mostly semi-Matt to preserve the sheen of the silver dope. I only used matt varnish on the roundels.

@Calatriste54 Жыл бұрын

You're using Gaspatch 1/48 Turnbuckles?

@TheAlleyman Жыл бұрын

Yes the 1/32 are too big in my opinion

@yrc4184 8 ай бұрын

Thats some magnificient work ! But why u using fishing line ?? There's better solution in modeling on the market .

@TheAlleyman 8 ай бұрын

On the market: yes. In my stash at the time: no 😅😅 jokes aside, you're right I think I will go for elastics for future projects

@justasuggestion8216 Жыл бұрын

Anyone suggest what size brass tubing to use on 1/48 aircraft rigging?

@TheAlleyman Жыл бұрын

It depends a bit on what you are using as rigging material. In general, you want to choose a diameter as small as possible but that let's you thread through your rigging.

@justasuggestion8216 Жыл бұрын

@@TheAlleyman I have EZ line but I do worry it won't be stiff enough to pass through. Amazing build BTW. I'll definitely be watching this series a few times over.

@TheAlleyman Жыл бұрын

@@justasuggestion8216 thanks, tbh I'm not sure I would go for turnbuckles in 1/48 as you easily fall out of scale (even in 1/32 it's a critical subject).

@johnhughes8563 Жыл бұрын

Ships please .

@TheAlleyman Жыл бұрын

Phew, to be honest I have a ship Modell started but it became a shelf queen pretty fast. I'll see to finish that episode one day but it might take a while.