Quick Beveling Trick

Рет қаралды 45,203

11 ай бұрын

The Doc is in with a quick tip to help you with your pipe layout. You already have soapstone to help you mark up your work why not let it help you with your layout?
#pipewelding #fabrication #quicktip #worksmarter #soapstone #pipewelder #welding

Пікірлер: 36

@AdmiralYeti8042 11 ай бұрын

I’ll just do what I always do and use an orbital pipe torch to set my bevel perfect every time. Sure it’s cheating but it beats the hell out of having to grind every time.

@petersipp5247 11 ай бұрын

Nice and simple. Goodin !

@jeepwk6.5L 11 ай бұрын

Should be noted wall thickness matters..

@righe8701 11 ай бұрын

100% right there. This would only work on a certain thickness

@Alaskabuilt_ 11 ай бұрын

Sweet! Tricks of the trade 🇺🇸💪

@nathanhawee5373 11 ай бұрын

That was the first thing I was tought islts all about the trix

@nathanhawee5373 11 ай бұрын

Been there ALOT my friend, good advice. Time saver right there

@danielcielmaee3642 11 ай бұрын

That just gives you thickness of the soap stone. So wouldn’t this only work if that was what you needed, or am I missing something?

@Jerbo1125 11 ай бұрын

That’s a pretty cool trick man like it I haven’t done much pipefitting in the last couple years but I’ve been known to throw some black iron around myself to steam boilers hydronic boiler’s, million and some BTUs over the years. Oh yeah.

@fixitallpaul4847 11 ай бұрын

Or grab a grinder and get busy. What a waste of time. Not that hard to bevel by eye.

@righe8701 11 ай бұрын

Thank fuck its not just me... why must people over complicate shit. If you cant bevel by eye, I don't wanna see your welds

@peterthethird7132 11 ай бұрын

Oh wow true professionals here. Doesn't hurt to take a few seconds to do something that will help you 😂😂

@righe8701 11 ай бұрын

@@peterthethird7132 few seconds. It's like 3-4 minutes you could have already done a pass around in the time to fuck around re sharpening your soap, (waste) finding your pen again, colouring it in. When all you have to do is shape down to the inside then maintain the same space by eye around. Its just useless info for views. Find any real welder that has to work under pressure and ask them if this is a good idea and worth the time...

@peterthethird7132 11 ай бұрын

@@righe8701 it's good to do layout in your first few times but then when u get good at that u can eyeball all u want. U gon bevel it shitty your first few times that's why it's good to "waste" 2-3 minutes marking so u get good product instead of "eyeballing" to go faster and end up fucking up trying to rush n then waste time trynna fix that.

@righe8701 11 ай бұрын

@@peterthethird7132 have you ever grinded a bevel? If your learning to do it from KZfaq for diy purposes, maybe I'll agree trying this. But this only works with that profile of steel it's not universal for bevelling. It's better to learn the correct way off the bat. This is still a waste of time, has nothing to do with being faster doing it by eye.

@jeffbegay9771 11 ай бұрын

What's the angle of a bevel pipe?...use the right degree angle tool..to check for the right deg.angle...

@user-nc2oj1wq8c 11 ай бұрын

nice good

@fasfgasdfagadsf 11 ай бұрын

Want practice? Start welding on your gas line.

@louistowers526 11 ай бұрын

Did you place the soap stones like |\ Or |/ 🤔

@alchemistld913 11 ай бұрын

|| like this

@louistowers526 11 ай бұрын

@@alchemistld913 just find it interesting how he puts the 2 together and is the sloped stone facing his left or his right in order to create the gap?.... Edit: because if both was perfectly straight 'sandwhiched' together would there be the gap?..

@ClayPro11 11 ай бұрын

@@louistowers526it would only make a gap one way... and he literally shows it in the video

@TM-dh2xb 11 ай бұрын

The square cut piece rests against the square cut edge of the pipe. For the beveled piece, the side with the smaller face is held against the square piece, so that the "point" or "tip" of the bevel stands off a few millimeters. You could essentially do the same thing with a compass. Just set the size you want, the run the needle tip alone the edge of the pipe, with the soapstone "lead" drawing a line on the face of the pipe all the way around.

@ConcordEditing 5 ай бұрын

|\|

@michealmckeown8681 10 ай бұрын

Do it for 30 years , could grind that to perfection in 3 minutes, mate gapping what’s the maximum in the USA, we’re only aloud, 10 % of the thickness, ie 20 mm 2 mm , sorry about the metric, 😊