Welding and Cast Iron Block Repair

Рет қаралды 139,027

Күн бұрын

This welding video will be related to a cast iron engine block repair and a cast iron exhaust manifold repair. Both will have a specific process that will be best suited for the repair. In this episode, Cliff will explain what to look for in a given situation when deciding how to weld and make a cast repair. It will also consist of welding techniques used and concepts applied.
Cliff Danis is an instructor at Delta Schoolcraft Intermediate School District based in Escanaba, Michigan and also the owner of WeldAll Industrial Co.
Follow him on IG @cliffdanis
Join this channel to get access to perks:
/ @welddotcom
Head over to our Website and become a member: www.weld.com
You can join our groups and forums, ask technical questions, answer questions in the community, look for jobs and more!
Follow up on Instagram: / welddotcom
Visit our www.Weld.com/shop
Don't miss new episodes of our podcast, please subscribe and leave us a review!
Now available on these platforms:
Anchor: anchor.fm/welddotcom
Google Podcasts: www.google.com/podcasts?feed=...
Spotify: open.spotify.com/show/4qWd24Y...
RadioPublic: radiopublic.com/welddotcom-6N...
Breaker: www.breaker.audio/welddotcom
Brands that Support the Channel:
LINCOLN ELECTRIC: www.lincolnelectric.com/
PFERD: www.pferd.com/us-en/
ABICOR BINZEL: www.binzel-abicor.com
THERMACUT: www.thermacut.us/
EVERLAST POWER SOURCES: www.everlastgenerators.com/?r...
AHP POWER SOURCES: www.ahpwelds.com
COMEAUX CAPS: comeauxcaps.com/
Don't forget to use our promo code WELD10 for 10% off
Get your ISOtunes (OSHA / NIOSH Compliant) Headphones HERE: Use our code WELD10 for 10% off isotunes.com/?rfsn=3712318.e7...
MELTTOOLS: melttools.com/welding-cameras/
Disclaimer: As an Amazon Affiliate and influencer, Weld.com earns from qualifying purchases via our posted links and affiliate links. Videos produced and made available by Weld.com or any of its affiliates, subsidiaries, or representatives (collectively, "Weld.com") are provided for informational purposes only. Although every effort has been made to provide the most accurate and useful information from sources believed to be reliable, no warranty, expressed or implied, is made regarding accuracy, adequacy, completeness, legality, reliability, or usefulness of any information. As tools, products, materials, equipment, techniques, and applicable laws, regulations and ordinances are constantly changing, Weld.com cannot and does not assume any responsibility or liability for the accuracy of the information contained herein. Under no circumstances shall Weld.com be responsible or liable in any way for any content, including but not limited to death, injury, errors or omissions in the content, or for any loss or damage of any kind incurred as a result of any content communicated in a video, on a website or by other means, whether displayed by Weld.com, or a third party in its original or a modified form. All content is subject to Weld.com and any third party's applicable terms and policies. Carefully review all terms and policies.
ALWAYS USE CAUTION WHEN UTILIZING ANY DISPLAYED TOOLS, EQUIPMENT, TECHNIQUES OR PROCESSES. IF EVER IN DOUBT, CONSULT A LICENSED PROFESSIONAL. ANY RELIANCE ON THE PRESENTED INFORMATION IS STRICTLY AT THE VIEWERS OWN RISK. EACH VIEWER EXPRESSLY AND VOLUNTARILY ASSUMES ANY AND ALL RISKS INCLUDING, BUT NOT LIMITED TO, DEATH, DISABILITY, AND/OR SERIOUS PHYSICAL INJURY RELATED TO THE USAGE OF ANY TOOLS, EQUIPMENT OR TECHNIQUES OR PROCESSES IN THE PRESENTED CONTENT. IN THE EVENT OF AN INJURY IMMEDIATELY SEEK MEDICAL ATTENTION.

Пікірлер: 243

@aaronwilson3952 2 жыл бұрын

Nice explanation and instructions on the metallurgical parts in the beginning. Thanks for sharing.

@benz-share9058 2 жыл бұрын

Yes, if you're a welder doing a range of jobs and on different materials, you'll become a little bit of a metallurgist automatically! Something of a mechanical engineer, too: The holes you drill to stop cracks accomplish that by spreading out stresses around the edge of the hole (instead of the tiny area at the point of the crack), reducing the stress concentrations that drive crack propagation. I like the explanation and the explainer. Would it have reduced crack risk in this repair if the block was modestly preheated and then covered with a blanket after welding?

@expediter99 2 жыл бұрын

Sir, your oral presentation is wonderful. The way you speak, no 'filler words', the confidence in the information. No dumb music. Thank you for letting me visit! Bill

@daleslover2771 2 жыл бұрын

Back in 87 at the community college to tie up our AWS cert & diploma we were required to do 80 hrs of community projects, labor was free, only charge on material if needed. Cost was a can of coffee, & a baker dozen from Dunkin donuts. Every thing from hard facing on dozer blades, rippers, rebuilding roller pins machine shop there would turn down, rewelding bicycles frames, rebuilding anything & everything... But this little Hispanic lady came in with a tortilla pan thats been in her family for four generations, had a hair line crack in the center, took for ever to get that carbon out of it.. but I did, ran two pilot holes to stop the crack, preheated, post heated, stress relieve, I forgot what rod we used, but it was very similar to hi Nickeli chromium base.. came out great, but when it came to getting the coffee& donuts, this lady brought in a complete home cook mexican meals for the entire shop.. Enchiladas Burritos, tacos refried beans, homemade salsa, fresh salad it was unbelievable what this lady & family did... 😊

@bobbyboykin7137 Жыл бұрын

Ive watched a LOT of welding instructional videos in my time. Most of them, the instructor blathers on about nebulous BS and you have to suffer through the nonsense to get to heart of the matter and even then they do a poor job actually being a teacher. This is, by far, the best instructional video (well, its up there with Jody's stuff) Ive watched. Not one second of this is wasted time watching, and every point made by this guy is on-point with this logic, metallurgy and materials-science conclusions. Well done sir.

@ajsironworks3937 2 жыл бұрын

That was cool. I like this guy and the knowledge behind his welding. Also the fact we all are bad at stuff at first then we get better

@Flying0Dismount 2 жыл бұрын

👍Brazing is always the correct answer when it comes to cast iron repairs.. I've always used regular silicon bronze filler but I will have to try aluminum bronze next time.

@explorationuk6737 2 жыл бұрын

Yes but no ..puddle gun is the answer ...

@8010289147 2 жыл бұрын

the strength of joint will be weak....dont think it is good option....we repair cats ironn by stitching

@scottcarr3264 Жыл бұрын

I like his reasoning about Using Aluminium Bronze because you run it on AC, and the AC action helps to clean out the crap from the weld area. Great Video.

@billarroo1 2 жыл бұрын

Wow, I've been welding over 40 years, this is the BEST cast iron weld repair explanation I ever heard, very well done. Thanks for your expertise😃

@eternaloptimist2840 2 жыл бұрын

Usually cast iron welding tutorials are all about pre-heat and post-heat and burying it in sand. I've never used TIG I just have some rain gutter to repair, this looks like the way to go. The rod isn't cheap but fixing cast iron is a valuable skill.

@Peter-V_00 2 жыл бұрын

I agree, this video had very helpful details as to "why" cast iron is handled differently, too many generalizations are not useful in actual practice, details matter.

@richardprice5978 Жыл бұрын

technically it's not a weld it's bronze brazing but that's still sometimes useful and water jackets-outside aren't stressed as much typically i got a 426 hemi iron 1970 block that needs repairing/mod's and was hoping to avoid using gas-welding as it's not my favourite to use

@tgreening Жыл бұрын

Did you grind the cracks out 100%? I may have missed that detail.

@grumpus27 Жыл бұрын

@@tgreening You can see around 11:50 he ground a wide groove but not right to the base of the crack.

@richardprice5978 Жыл бұрын

@@tgreening the goal when doing it is to have the welder getting to all of it and on the end's about 1/8 more so the crack's don't have a easy placement to start again as far as over grinding yes technically possible but it just makes more time/work to fixing it but not enough and you probably will have to grind out the hole old weld you just did as it probably will crack the weld or close to it

@soundslikebstome 2 жыл бұрын

I don't think I have ever heard a welding procedure explained so well.

@zachelias175 2 жыл бұрын

This is awesome. Such a great instructor who explains it all so well. Thanks for the info!!

@frankk533 2 жыл бұрын

One of the most interesting and informative videos about welding on KZfaq. Brilliant work. Keep them coming!!

@jaychretien151 2 жыл бұрын

Yes! More from this guy! That was the most concise tutorial on cast iron I’ve seen.

@austinlane5533 2 жыл бұрын

Can't get enough. Wake up to weld, go to bed thinking about the next puddle.. Love it man, keep it up.

@JSaltyfabricator 2 жыл бұрын

I just ordered a bunch of Al and Si bronze rods for just this 🤙 Thanks man! Great video and super informative. Cheers from Victoria BC

@garymadden2328 2 жыл бұрын

The most educational video I've seen on welding. Thanks Cliff, excellent.

@Greenjeans2020 2 жыл бұрын

Nice video and explanation! Not long ago I TIG welded a cast iron exhaust manifold for a Kohler engine. I used stick cast iron rod (Ni rod) and cleaned off the coating. Pre heated the part to about 350 degs. Like you I jumped around the part to minimize stressing. I than heated the part again and put in in sand to slow cool it. I was surprised how well is welded except for a few pops due to carbon or voids.

@davidbusch3176 2 жыл бұрын

Thank you for a very informative video, very practical and down to earth and honest. What a genuine fellow, really cares about getting the practical info across and teaching the audience. Thanks again.

@markl6769 2 жыл бұрын

Great process Cliff, I tried cast iron repair for a short time back in the early 90's while doing cracked cylinder head repair (mostly aluminum) at a machine shop I worked at. I bought cast iron rods our supplier suggested, and went to town with rose bud pre and during weld, sand to cover while cooling. Many tries, no joy. I almost bought a used pizza oven and then decided to keep brazing when possible and use an old method of drill and peen plugs in combustion chamber with success. Thanks for sharing your processes with me. Really challenging work. Happy to see people like you willing and able to save the old iron. Great job, Thank you.

@ayresomemaintenance4627 2 жыл бұрын

Fantastic video, great explanation on the metallurgy of cast it’s always been something I’ve stayed away from welding. The Ol boys always Said “If you can’t cold stitch it, Scrap it” thank you for sharing 💪🔥🔥🔥

@anthonychambers8691 2 жыл бұрын

Great instructional video, Cliff. Really great metallurgical explanation and welding demonstration.

@stephk5255 2 жыл бұрын

I love the explanation of materials and techniques as if the viewer was very new... because I am. It made total sense! Thank you!

@causewaykayak 2 жыл бұрын

From UK. That was a brilliant comprehensive technical overview of the process. Clearly put and Thank You so much for speaking to us in such a well paced way. Great job. I once worked in BTH, English Electric Steam Turbine Div. Willans Works, at Rugby town central England. The main product there was Prime Generator Turbines for public utility power companies. The large castings for steam chests weighed many tons and were produced in sand boxes in their own foundry. I reckon these weighed dozens of tons and like you say about residual stresses - they would crack on cooling. Multi million dollar item! The firm had welders based in the foundry ready to fix things. They used Bronze Welding (called Brazing in UK) and after QC X-Rays (& dye penetrant testing if I remember right) temporary gas fired oven (portable shields) were put round these monsters and specialist technicians in aluminised fire suits with I think water cooling etc would run the liquid gold magic silicon bronze into the prepared cracks. Yes the had ovens big enough to take the covers of a low pressure housing off a 600 Mw set. Preheat and bronze weld. The firm is now part of General Electric I hear and there must be others out there who know that factory of the process and can correct me where I'm wrong on any details. Keep the videos coming. You all got own styles and all of you are highly educational. Thanks!!

@split150 2 жыл бұрын

Wow, that was fantastic. Hope to see more topics from you, and I'm sure many others would agree.

@sethhughes2163 Жыл бұрын

Straight up info! Been doing this since I was 16 in 76'... with twisted wire brazing with a jeweler's torch. My uncle ran a Pressure Vessel shop and taught me how to do X- ray repairs guys twice my age mainly tried... lol. Adapted from Eutectic filler to solid rods we center less ground, to Aluminum Nickel Bronze with proper 2 step preheat and gas adjusted by a progressive/regression type monitoring. Our contracts teaching D.O.D. personnel has been a stellar advancement for " OUR BOYS ". KUDO'S my friend... you are on point. Seth

@dougkrulik4231 Жыл бұрын

Thank you for being articulate and knowledgeable on metallurgy It seems welders now a days are getting more and more scientific and knowledgeable and it’s great.

@mrdddeeezzzweldor5039 Жыл бұрын

Best discussion about cast iron's carbon content and weld repair characteristics that I've heard. I tend to think bronze brazing due to elongation and ductility. I like the aspect of lower temperatue and its wetting actionwhich makes me 'feel' like it's really joining with the cast surface. No issues with repairs with bronze rod yet.

@OMGITSMRMACK 2 ай бұрын

Just got done using this to fix my brand new $2000 block.. worked like a charm.. thanks for posting this! Welded very easy and clean as well.. it was on a part that broke off that holds a M8 head bolt at the top.. already machined and tapped and tq held way passed what is needed of it!

@nomoniker7917 Жыл бұрын

Decent fellow. America needs more people like that gentleman.

@Flygio 2 жыл бұрын

Absolutely loved this episode. Perfect and deep explanation. I learned a lot. Thanks.

@bobhigginbotham9035 2 жыл бұрын

Cliff! Thanks for the shout out! Excellent video buddy!

@cliffdanis1521 2 жыл бұрын

No Problem!! Appreciate it!

@jojorumbles8749 Жыл бұрын

I love videos like this. They've put me to the top of my apprenticeship class.

@richardfuerst5286 2 жыл бұрын

Greetings from a trol! 😁 I welded a cast iron household water pump with aluminum bronze filler. That was 3 years ago. Never got a call back

@NewRiverRepair 2 жыл бұрын

Thanks Cliff nice tutorial and treatise on the welding and prep!

@Peterbsullivan 2 жыл бұрын

I never welded before. This guy is the best teacher you have used so far. Some of us need this type of explanation of things.

@williepelzer384 Жыл бұрын

I have used 10 lbs of brass on one repair several times. With great results. Fun stuff. Your correct the preparation is as important as the welding

@GRich120 2 жыл бұрын

Outstanding Video! Thanks Cliff.

@markluxton3402 Жыл бұрын

A tip I learned is to not use grinder disks/flap disks on the cracks to be welded. The disks, apparently, create a gouge where the ground carbon fills the porous cast. This causes more carbon to migrate into welds. The tip I learned was to use carbide burrs to CUT out the crack, instead of grinding.

@ALAPINO Жыл бұрын

I've never given this a go on GTAW. On a LASER AlBr does quite well. Thanks for the tips, good sir!

@recrdholdr 2 жыл бұрын

All Great advice. I often use Silicon Bronze for cast repair but I'm almost never repairing engine blocks. Mainly manifold and such where it needs to be sealed but not structural.

@benz-share9058 2 жыл бұрын

Aluminum bronze is supposed to be stronger and harder. I've heard more elongation too, but not sure of that. Using AC (instead of DC that's typical for silicon bronze) should provide some cleaning action that will help cope with the impurities you'll face in old cast iron. Should only need relatively small cleaning action, maybe 10% EP vs the typical 25-30% that would be used for regular aluminum. BTW, I like the encouraging tone of this guy!

@timothywilliams2021 2 жыл бұрын

Will definitely have to try this. Welding cast for me can sometimes be easy and go great. Sometimes extremely difficult. Definitely a steep and quick learning curve. But i haven't had any failed parts yet. Only failed attempts that i had to come at in different ways to complete.

@IRONMANMETALBILLDANKANIS 2 жыл бұрын

Thanks for explaining this so a chimp like me can understand.

@robertwest3093 Жыл бұрын

I didn't get anywhere near this level of detailed information when I took a welding class years ago. He would make a great instructor at a college or vocational school.

@gregcampbell3064 5 ай бұрын

Just filled a small hole on some core shift that appeared during a gasket match on a SBC head. Did the standard 400* preheat with a slightly carburizing flame with a postheat, then insulated the structure for a slow return to room temperature. Hopefully to keep some ductility in the repair and eliminate the possibility of a crack. Used a 3/32" Nassau Brutus A electrode designed for spring, tool, and casted steel for the 1/2" repair area. Your video was great and very informative and reminded me of my college Metallurgy course with an emphasis on practical application. I will definitely try the aluminum bronze on a large structure repair next time where ductility is needed due to expansion and contraction during the heat cycling of things like an engine block. The use of a lower melting point filler material like aluminum bronze will be an advantage and minimize the heat affected zone of the repair. Great video and the knowledge shared was equally great!

@sylvanbaril4607 10 ай бұрын

I am a wood worker doing many things , I wish I was good like you at welding . Tank's , you are amazing to me .

@petersonsawmillservice268 2 жыл бұрын

I learned something new. Aluminum bronze. For cast.

@jasonrevelle1505 2 жыл бұрын

Nicely done,thank you for your wisdom.

@danlearned6199 Жыл бұрын

If I may I'd like to share previous experience with cast iron weld repair. Certified 20+ years as aerospace welder/shop supervisor in the structures and powerplants depts and race car fabrication. As you have learned, being a welder means sometimes you are everyone's 'best friend'... Running these depts I had a heat treating oven available for pre and post weld heating and cool down. Years ago, a cracked set of SB Ford heads were cracked. The 'old school' method suggested brazing with silicon bronze filler. Descale the area, stop drill the cracks, v-gouge the cracks, pre heat soak to 300+ deg. AC tig braze fill from both ends of cracks towards the middle with good overlap then slowly cool in the ovens. At about 6 hours with heads cooling near ambient temp, heard the awful sound of cracking!!! Repeat the process, eventually saved the heads. A lot of time, effort for a maybe repair. There has to be a better way. Talking with a Eutectic sales rep, he suggested I try their special rod intended for cast iron and mismatched ferrous alloys, the Eutectic 680 filler. Available in tig and stick form. Intended as a specialty filler for difficult, unusual weld repairs. It has the unique ability to tenaciously hold onto the base metal but.. the filler puddle will 'relax' as it cools preventing post repair stress cracking. A somewhat low temp filler similar to your alum/bronze filler. A friend racing a seriously modified Austin Healey Sprite in autocross his engine was in need of rebuild at a storied foreign engine machine shop. There you might find anything from a Fiat to a Ferrari engine overhauled, balanced and blueprinted. They magnafluxed the head, found it cracked between cyls 2-3. Very common... two siamesed exh. valves side by side with no cooling passage between them and they both share one common exhaust port. A disastrous design doomed to failure. The machine shop owner said 60% or more of the BMC 850,948,1100 and 1275cc series heads all share this trait, showed me a stack of cracked heads with this, all deemed unrepairable and that good useable heads were becoming very scarce. Decided to give the Eutectic filler a try. Carefully v-gouged the crack until it seemed to end, close to 5/8ths inch deep. Heat the area with a torch, inspect with magnifying glass to ensure the end of crack is found. AC tig/braze with the filler, not worried about excess build up. The machine shop will take care of that. Head returned to machine shop, passed magnaflux test, shop milled and ground repair area, installed hard exhaust seats, repair deemed successful. I did 6 more of these heads for the machine shop at $100 each, all successfully repaired. A Harley owner with old cracked knuckle heads came in that had been very poorly repaired at a high cost asked if I would try to fix his heads. Not a Harley fan, didn't give the loving care I had the others I found some of the nastiest, dirtiest cast iron ever encountered. Pockets of sand, oil that would explode while welding, grind back, try it again. Like it or not, the repairs worked. To this day I consider the Eutectic 680 a 'wonder rod', seems able to hang onto, weld virtually anything of a ferrous base metal. Maybe this could be also added to your arsenal of repair fillers for difficult situations. YMMV...

@holyhammerironworks2384 2 жыл бұрын

Great information! Never thought about aluminum bronze for a cast iron repair? I am going to try it. Thanks from a fellow Yooper.

@barbarasteed3966 2 жыл бұрын

Thanks everything you said MAKES GOOD SENSE..

@nickimperialengines2559 9 ай бұрын

Best Cast tig vid yet. Love the Al bronze.

@Worthrhetime 2 жыл бұрын

Awesome. Great info and presentation. Thank you.

@hosseinabdal7184 2 жыл бұрын

Perfect

@precisionarc 2 жыл бұрын

Good job Cliff, great info explained well

@davidharper4289 7 ай бұрын

Sensational. You, my friend, are a true professional and excellent teacher. Cheers from Australia. Davo

@bobbybieln853 6 ай бұрын

Can't wait to try aluminum bronze. I have tig weld with muggy 77 with good repairs. Welding cast aluminum is the same , great prep=a nice solid repair with no come backs .👍

@ktate2002 2 жыл бұрын

Excellent teacher! Thank you.

@tommyobrien9480 2 жыл бұрын

Thanks for sharing your huge knowledge with us, very helpful and informative 👍

@rickolson9011 2 жыл бұрын

Really excellent explanation! Thanks!

@25vrd48 9 ай бұрын

I learned a lot from this video , I had no idea there is so many different types of cast iron . I do know cast iron is extremely hard to successfully weld . Awesome video . TO BE TRUTHFUL I WAS EXPECTING TO HEAR THE BLOCK CRACK AS YOU WERE FINISHING YOUR VIDEO .

@petercasper224 2 жыл бұрын

Awesome vid! Very informative explanation.

@georgef1176 Жыл бұрын

Great stuff! Thank you for sharing your knowledge.

@fusinweldingfabrication3255 2 жыл бұрын

Great video man, I do a lot of cast and still learned something!!

@cliffdanis1521 2 жыл бұрын

Thanks!!

@MrCristianflorin Жыл бұрын

Great video, lots of info on the metallurgical part of welding. On side note, I had to weld a crack in punch press arm some time ago for the company i work for. We didn't had any ac capable welding machine just mig and a little dc tig welder, i chose to use the dc tig with 316 stainless as filler(of a mig reel lol) and its been fine for the past 3 months.

@mikemoore9757 2 жыл бұрын

Great presentation. You seem to know what your talking about. I would like to see you do a video on the same subject using nickle alloy rod. Thanks man!

@jimmccarville5152 Жыл бұрын

WOW, someone that understands metallurgical terminology but have never heard of using aluminum as a filling metal for a ferrous metal repair. I've been an aeronautical and heavy equipment welder for over 30 years (17 years as a certified Naval Aviation and shipboard welder) and have repaired numerous cast products but the use of aluminum is definitely different. 90% of the time I used a Nickel base filler metal whether (GTAW & SMAW) but always used a rose bud to pre-heat and post-heat after each welding process. But I will definitely look into using an aluminum base filler rod. Thanks for sharing your findings.

@sterlingbarrus7012 2 жыл бұрын

I wish you showed it after the welds were ground! Bet it was a beauty!

@Michael-we1nt 2 жыл бұрын

I bet it wasnt a beauty! he should leave it alone. the chance of it cracking got greater

@cameronjacobs3144 2 жыл бұрын

Thanks so much for the video, very informative!

@lawrenceveinotte 2 жыл бұрын

The best results i have had welding cast has been with a stick welder using "Arctec #3" i have done brazing and acetylene welding cast iron, i have yet to try Tig welding cast, next time i will, thanks.

@paulmuff9883 2 жыл бұрын

Nicely explained, thanks 👍😀

@sbucele1255 Жыл бұрын

You explained that just so well buddy and I understand the steels

@frontlinemedia4270 Жыл бұрын

Great info on this. I never knew about aluminum bronze because everyone always said use a nickel rod

@gerbos87 Жыл бұрын

Enjoyed this. Lots of Great Information.

@deanschmeltzer9620 2 жыл бұрын

Great job! Super advise

@anthonymarino4260 2 жыл бұрын

always learning thanks

@HUBBABUBBADOOPYDOOP 2 жыл бұрын

Beautiful work👍🏼

@quartfeira 2 жыл бұрын

Thank you Chris Anus I love aluminum bronze too. Great video cheers 💥🤟

@fsj197811 2 жыл бұрын

Thanks for sharing!

@jfuzi3605 Жыл бұрын

Great explanation!! I also have done many cast weld repairs including cast aluminum( which is a freaking nightmare) you were dead on in your description and methods.....I'm very glad you did such an in depth explanation...my only suggestion would be to go into a little more detail on the cleaning and grinding procedure. Great job!

@jwshoptime.jeeprepairpleas8552 2 жыл бұрын

Dad was a farmer from Idaho he brazing rod and the torch not to much at once. I like alum bronz tech.. I've seen a needle gun used to hide repairs on cast end to pean for stress relief. 😩

@DobleWhiteAndStabley Жыл бұрын

Is this why brazing has been a go to cast iron repair for the longest time?

@JG-kv4oi Жыл бұрын

Great presentation! 👍

@tombarnes1871 2 жыл бұрын

Very good video; learned a lot!!

@martinfalls1023 Жыл бұрын

I like detail and clear logical explanation

@oswaldpino1038 Жыл бұрын

Excellent explanation video thank you

@adamapostolos781 12 күн бұрын

Super info, very helpful, thank you very much for sharing your knowledge 😊

@blown572hemi 3 ай бұрын

I loved learning metallurgy. Just remember....brittle means cracking. Cast iron in general does not like going back into a molten state. I've thrown blocks into a home stove before because like he's stated, the best way is heating the medium. It's more difficult heating cast iron because you have a hot block or cylinder head's in my case but, it's worth it. At least from what I've seen and done.

@mosfet500 9 ай бұрын

Thanks, great explanation.

@JonDingle 2 жыл бұрын

Very interesting. I have welded cast iron using high nickel content stick rods, with pre and post heat and peening in-between the short weld beads l laid. The repairs have been a successful. I will try some of those rods if l can get them in the UK? Too stuff.

@leepatton1180 2 жыл бұрын

Thanks for the video

@mehdikhoshzaman3039 Жыл бұрын

Loved your video . Thanks man.

@Sergeant5e Жыл бұрын

Non welding person at all here. Best video I have seen so far and I have seen many. To say the least/most (🤔🤔🤔🤔, both a compliment) all I learned from this is that I will not be TRYING to repair my brothers block. It's the bolt hole for the starter, it has two cracks. So we were thinking HEY JUST USE A MIG WELDER AND TACK IT AND EVERYTHING WILL BE FINE. IT WILL PREVENT THE CRACK FROM SPREADING AND HOLD THE STATER IN PLACE, but no.

@davecarroll5989 Жыл бұрын

Great information thanks

@richyoung5007 Жыл бұрын

Excellent tutorial! I wish you were in Idaho. I have a 1938 Waterous pump housing, for a 1938 Ford Luverned fire truck, that froze and cracked at some point in its 84 year life. Someone tried to weld it and it appears to be herendously awful. I am not even close to having the skill to weld it but I wanted to educate myself as I look for someone to weld it.