One Vacuum Cleaner For Whole Workshop || Woodworking Dust Collection System From PVC Pipes

Рет қаралды 582,019

2 жыл бұрын

How To Make A Blast Gates For A Dust Collection System
In this video I will show you how a very simple homemade device could efficiently collect all dust from various workshop power tools by using only one shop vac.
I made a dust splitter for 5 tools, but it could be made with your preferred number of ports and sizes. This is a general idea of how the very simple device could be made depending on each workshop’s needs. And yes, this is one of those builds that I’m questioning myself - “why I didn’t build it years ago”.
Used parts:
- Neodymium magnets 10x5mm: shorturl.at/rJP48
- Dust hose: shorturl.at/mK148
- Forstner bits: shorturl.at/rR056
DIY Cyclone Dust Collector From Two Buckets - • DIY: Cyclone Dust Coll...

Пікірлер: 239

@joooooooooooe Ай бұрын

your use of tape as an epoxy mixing surface is genius. it’s disposable and you don’t have to worry about it blowing away

@mrgcav Ай бұрын

Where have you been? This has been done for decades. Nothing new.

@faithful451 Ай бұрын

Yeh it's good ay I've seen a couple people doing it and I was like damn this completely fixes why I hated using epoxy glue. Hopefully I remember it next time I need it

@siggyincr7447 3 ай бұрын

Using the magnets to simultaneously position and pull the sealing faces against each other is really clever. I would only say that you would want the magnets to be ever so slightly recessed below the surface to minimize suction leaks at the sliding joint. With so many half-baked ideas on DIY channels, it's nice to see something that someone actually well thought out and made.

@sapelesteve 4 ай бұрын

Hands down one of the best dust collection systems that I have seen on YT! Well done! 👍👍

@Dnias1 Ай бұрын

This is a really cool system. The fact that you don't need any fancy electronics, yet it's super simple and effective, makes me want to build this. In fact, I think I'm going to build one! Thanks for the awesome video :)

@amosevie Жыл бұрын

This is a great idea and easy to build. I had an extensive dust collection system before we moved, and now I don't have room in my one car garage for a big unit. This will definitely fit in my small shop with a couple of vacs and separators.

@Jasonsdesignshop 2 жыл бұрын

Well, you beat me to this idea fellow KZfaqr! I thought about it for three days and came up with this idea to avoid buying the expensive gates then searched KZfaq to see if this idea was out there. And there you are. I think two others as well. Your best contribution to the concept is the magnets! Love it. This is my next shop project. Thanks for proving the concept for me 😎

@Jasonsdesignshop Жыл бұрын

Just finished it and ya it’s awesome! Totally should have done this two years ago but I did not have all the tools then. My video coming out soon!

@alexcorona Жыл бұрын

These have been in shops for decades lol

@tomfull6637 4 ай бұрын

@@alexcoronaYou missed the essential part!

@cyrilnorrie8450 5 ай бұрын

What an excellent design and you won’t experience suction loss from bends or blind corners in a box. Thanks for sharing your idea.

@cook6052 11 ай бұрын

Just love the efficient simplicity of your dust manafold.❤

@I3urton 3 ай бұрын

I don't even have a workshop, but if I ever do, I'm definitely stealing this idea. Absolutely brilliant in its simplicity!

@Mriya6 4 ай бұрын

Excellent idea! For added aesthetic I would have painted different coloured bands on each hose, and then painted each port with the matching colour. So even someone unfamiliar with your workshop could go "green hose, green port, easy!"

@kenord3437 4 ай бұрын

What a great idea, thank you, I will have to build this for my shop. You are a God sent, many thanks to you, Ken from Australia

@glennryzebol4472 4 ай бұрын

this is super slick. Well designed, functional, tidy. Well done!!

@milosgrujic9118 3 ай бұрын

Love this briliant idea and also love how now I have all the stuff to build this. Great! Thanks!

@devinredlich7011 2 жыл бұрын

This is a very elegant solution to the tool switching problem. Nice.

@Chris-oj7ro 2 жыл бұрын

Thank you! This is exactly what I needed. This beats using blast gates because the flow restriction should be less.

@andyhewitt3527 Жыл бұрын

This is so great! Thanks for sharing I never would have thought I'd be able to do something like that myself

@ricardolacza 2 жыл бұрын

Incredibly creative and simple. Thanks a lot.

@greenkitty6482 4 ай бұрын

That’s exactly what I need!!! Thanks for sharing 😃

@nore8141 7 ай бұрын

This is a great option especially when your in a small shop. Thanks 🙏

@danam664 2 жыл бұрын

Truly a useful build. I'm definitely going to make some of these. Thank you for sharing this.

@shankarh6915 8 ай бұрын

Lovely build!

@selianboy8508 Жыл бұрын

That is deffo about the best solution I have seen. SO EASY! I think that smooth piping is about the only thing I can think of to improve the setup. Since all piping to each tool is actually fixed, it would be better to have fixed piping to the dust separator. The less flex-tubing the better I would think. I will use this idea in my upcoming workshop revamp for sure. Thamk you.

@soundmanmartin 2 жыл бұрын

fantastic.. .i built one myself a few years ago..but im now re making it.. the magnets why didnt i think of that ! you are a genius .

@rogerazevedo4094 3 ай бұрын

Excellent idea. Clean, quick and very practical. A win win.

@j.u.c.o 10 ай бұрын

Looked at a handful of these and this seems like the best design. The ones that open up into a larger section with plexiglass look cool, but they actually cause turbulence and a loss in suction because the airflow stream is interrupted/ isn't consistent. Whereas, in this one, there's almost no interruption because you're switching the hose over directly to line up with another hose. I'll be taking a stba at this one soon! thanks!

@--JawZ-- 3 ай бұрын

Awesome idea, thanks for sharing it with us all!

@user-vl2zq6ox8u 4 ай бұрын

Thanks, that is really a good idea. I especially like the use of the magnets. It'll help with suction loss.

@MrGlyn321 5 ай бұрын

This is a super idea, especially for a small workshop, which I have. Will definitely be making one of these. Thank you for sharing a very well-made video.

@Bo-kq8tn 4 ай бұрын

This feels like one of those designs so good it seems like it would be obvious, but was probably much harder to come up with and design than people realize. Well done and thank you for making a video about it! I love how easy it would be to move tools around in the future since they're on flexible hoses that could detach. Modularity is great in any shop! :)

@creamwobbly Ай бұрын

Yes, except it's already solved by IC engine exhaust headers and steam engine blast pipes. If he'd built permanent junctions, no switching would be necessary.

@creamwobbly Ай бұрын

Oh, also he could run multiple tools simultaneously.

@techheck3358 Ай бұрын

@@creamwobblyexcept the shop vac isn’t strong enough to collect from multiple machines simultaneously. The whole point of this is to concentrate the suction on a single machine

@user-dc6sw4xf9z 2 ай бұрын

Throwing out my present system and going to build this. Excellent design.

@Tchefter 2 жыл бұрын

Comes to the right time! thanks for showing!

@bnssoftware3292 Жыл бұрын

I've seen a few of these but I like the idea of using magnets. That way you don't have to pull out a pin or anything. Brilliant. Thank you.

@faithful451 Ай бұрын

I love this setup. So cool

@Dannyscuriousquests Ай бұрын

thats simply brilliant

@paullobwein1632 4 ай бұрын

Love it! Thank you for sharing such a great idea

@hatbpto5180 2 жыл бұрын

Great idea with the magnets. You sir, are a mad scientist!

@KyleVeatch 5 ай бұрын

Thanks for the video! I was looking for a dust collection management system for my shop and I ended up going with a larger version of this.

@fortissimoX 3 ай бұрын

Great idea and realization!

@treepop1550 4 ай бұрын

Great idea and execution!!

@sydswaine3627 4 ай бұрын

Brilliant! Thanks for this!

@andrewbrown8148 Жыл бұрын

Great solution & design~! I'll definitely be building one of these for my workstation that holds my spindle sander, scroll saw, Kreg jig, & mortiser. Thanks~!

@charliehubbard4073 3 ай бұрын

Brilliant! Thank you.

@jaxn66 Ай бұрын

Ingenious brother, Thanks!

@RichieRich845 3 ай бұрын

Simply brilliant 👍

@Mat0s0 Ай бұрын

I think I'll replicate your design for when I start forming my own workshop!

@MCsCreations 2 жыл бұрын

Just brilliant, dude! Fantastic work! 😃 Stay safe there with your family! 🖖😊

@avdeling20 8 ай бұрын

You're an absolute legend for sharing this. Built it tonight and it works like a boss ⭐

@SiTengoTiempo 9 күн бұрын

Great idea! Thanks.

@JK-Handyman Жыл бұрын

This is exactly what i was looking for! thanks for sharing, you are a genius

@gebber3890 2 жыл бұрын

Thank you for this! I just made one and it works awesome!

@JAYTEEAU 6 ай бұрын

Excellent video. Clear instructions and very easy to understand. Thank you

@felixreali7101 Жыл бұрын

absolute genius!!!! thank you for sharing this.

@Spodokamono 7 ай бұрын

Great idea and something I will definitely be incorporating into my workshop. 👏👏👏 Very well made video and very easy to follow. Thanks for uploading this helpful video. 👍

@gnito72 Ай бұрын

Really easy, great gadget, thanks for sharing !!!

@SGRblink 3 ай бұрын

Genius sir , bravo !

@xinixxagnix201 2 жыл бұрын

Clean install, great job

@Dingbat217 Жыл бұрын

That's a great idea, I'll have to make one too! Thanks for sharing! 👍

@chrisstaniforth5629 Ай бұрын

Nice!! Great work!

@martinriley106 4 ай бұрын

Excellent idea! 👍👍👍👍

@littleB916 2 жыл бұрын

Great work! SImple plan, and great video. 🤙🏼

@thedolphin5428 2 ай бұрын

Great idea, nicely made, nicely presented. Well done.

@vileguile4 2 жыл бұрын

I created very similar adapters with my 3d printer. A couple of times i designed them going in the wrong direction =) In the end though, very good results! Friction fit on pvc pipes using a minor angle worked great. Regarding your design here... it looks great and i will certainly copy it! Right now i have a system with one input and then several hoses hanging from the ceiling going to it from the machines. Magnets.. sliding thing ... brilliant! Well done!

@pstrzel 5 ай бұрын

Haha, did the same. I made a few, but first one was opposite direction.

@atfundum 4 ай бұрын

Very clever made !!!

@castlecodersltd 4 ай бұрын

Very nice and simple. Always the best kind of solution. Thanks for sharing

@edkinsel3553 Жыл бұрын

Pure genius. Cool as hell.

@davidmcgrath6507 5 ай бұрын

Brilliantly simple!

@Nettle314 7 ай бұрын

Love this set up! I might make one myself. Have you got plans to those 3D printed connections? Cheers!

@sitgesvillaapartmentneilsc7924 2 ай бұрын

Thanks I can see why you have so many subscribers !! KISS love the idea and its something I think I will introduce in to my small house workshop, Thanks

@DonCarlione973 3 ай бұрын

That was an awesome idea! Great job man 👍🏼👍🏼

@iRReligious 2 ай бұрын

Love it! 👍👍👍

@HarmonieZvuku-harfy-kalimby Жыл бұрын

This is simple and briliant idea. I couldnt fine 50mm blast gates in local shops but I found this and I will use it, thank you. Just a thought about air restrictions. You are using too much hoses. If you rather use pipes and just a little of hoses it would be much better for air flow. Tomáš

@josephking6515 4 ай бұрын

Pretty slick. 👍👍👍👍👍

@timprescott4634 2 күн бұрын

Brilliant. There is money to be made here…

@techtonicsystems 10 ай бұрын

Brilliant idea! Many thanks for this excellent video

@diyprojectchannel 3 ай бұрын

A really cool idea. Thank you 🙏

@viorsa8200 2 жыл бұрын

Excelente proyecto muy bien desarrollado y mejor ejecutado , un súper colector de aspiración imantado , gracias por compartir tanta creatividad , un saludo cordial y por supuesto un gran like desde Narón , Galicia (España) 🤓 😜

@LH782 Жыл бұрын

A piece of felt glued to the slider part might help it to seal the vacuum better?

@giampieromurgia6962 3 ай бұрын

Complimenti. Un idea fenomenale 👍

@ca8920 4 ай бұрын

Great work and ideas

@benjenkins2415 2 жыл бұрын

I love this. I was trying to think about a solution for using my Festool Midi and didn’t want to have to buy a bunch of custom hoses. This seems like the perfect solution. Thanks for sharing.

@ericbuller7079 Жыл бұрын

Hello! Has this solution worked well with your Festool? What is your maximum hose length?

@wernerpfeifer 2 ай бұрын

Grandiose Technik!

@pacificcoastwoodcrafts 2 жыл бұрын

Great idea for a small shop!

@cesargamez7384 2 жыл бұрын

Gracias por enseñarnos a aprender y regalarnos de su valioso tiempo maestro de Aguascalientes México Fransisco Gamez un abrazo muy fuerte y saludos cordiales bendiciones para usted y toda su familia 😊👍👍👍👍👍 👍👍👍👍 es usted genial

@gsftom Жыл бұрын

Great build!

@pedrodias5813 2 ай бұрын

Nice work good job man

@gregvaneeckhout1877 Жыл бұрын

Very nice simple idea, I will be able to make some small changes but it will work great and saves me buying a bunch of blast gates and is much simpler.- thanks

@EpicSqu1rrel 3 ай бұрын

This is amazing, going to do the same at some point. thank you.

@user-hh3ek3nr1k Жыл бұрын

Good job! Пара советов. Если не планируете перемещать инструменты, к которым подключено пылеотведение, соберите воздуховоды из жёсткой канализционной (серой) трубы - внутренняя поверхность этой трубы гладкая, сопротивление потоку воздуха меньше, а значит сэкономленных денег больше. Не видел изготовление Вами циклона, но думаю будет лучше заказать готовый с алиэкспресс. Лучше было бы развернуть вниз (прикрепить вертикально) изготовленную приспособу, чтоб не задевать коленями шланг. Успехов в труде, берегите себя! 👋

@ozzietadziu 3 ай бұрын

Brilliant!

@NamelesshunterGaming 4 ай бұрын

great idea, thank you for sharing

@cirrusdesigngroup 5 ай бұрын

Well done and thanks for sharing.

@maciej9280 2 жыл бұрын

simply brilliant

@pfoxhound 3 ай бұрын

Genius idea.🎉

@vladimirsp3484 Жыл бұрын

Отличная идея! Автору спасибо!

@patriciojohnaminge1416 3 ай бұрын

Good job man

@piotrekj.1277 2 жыл бұрын

GREAT JOB !

@garymorin4813 Жыл бұрын

I just finished building a simple cyclone dust separator, it works well, now how do I connect it to all my devices? I had just purchased a few pipe fittings, but this is far better and more elegant solution. Very impressed.