How To Cut A Glass Bottle With A Simple Tool!

Рет қаралды 2,104,145

Жыл бұрын

In this video, I’ll show you a very simple technique that allows you to cut this kind of spiral shape out of a glass bottle. You will be surprised by how simple it is! And what is most important - you could do it by yourself with a few basic tools.
DIY Fractal Vise Jaws From A Gear Teeth - • Upgrading a Bench Vise...
Main used tools:
- Diamond Glass cutter: shorturl.at/bJQY9
- Rotary Tool Cutting Discs: shorturl.at/CLTV8
- Electric tape: shorturl.at/diF06
Recommended:
- Spiral router bits - shorturl.at/cjnAP
- Carving spiral router bit: shorturl.at/yOPRV
- Machinist squares: shorturl.at/amRU4
- ToolkitRC M7AC - A better smart charger: rb.gy/7i2eww
Music by Epidemic Sound (www.epidemicsound.com)

Пікірлер: 439

@chickenzz2612 Жыл бұрын

How to cut a glass bottle with a simple tool. Continues to name tools ive never even heard of. Perfect

@magicalpencil Ай бұрын

He uses a glass cutter and a soldering iron. What tools did you expect? A hammer and screwdriver?

@MarinusMakesStuff Жыл бұрын

Nice video, I like the narration as well! It really makes the video more complete and it shows you are involved with really wanting to explain it.

@justglenc 3 ай бұрын

This is really pro. Thanks for the soldering iron tip. 👏🏻👏🏻

@xpndblhero5170 Жыл бұрын

Watching the glass crack really slowly was very satisfying.... Now I want to try.

@Baldavier Жыл бұрын

Great!!! Would love to see what more you could do after these are made!

@korysmith6513 Жыл бұрын

That's AWESOME!!!!! You did that SOOO much easier & simpler than any other wine bottle cutting vid I've seen. & I've watched a lot;!!!! THANK YOU!!!!!!♥️♥️♥️♥️

@commandoconstruction2720 Жыл бұрын

Very cool technique. Nicely filmed. Thanks for vid.

@lulum1656 Жыл бұрын

Awesome, just what I need for my upcycling assignment!

@brendagould13 3 ай бұрын

Amazing work! Thank you for posting!

@footgod420 Жыл бұрын

Of all the ways I've learned to cut bottles this way is definitely the coolest, and I love the fact that you could just cut any shape you want out of the glass all I knew how to do before was how to cut the tops off of bottles, and make them into cups which I learned on a different KZfaq video, and of course I used to drill holes bottles with a diamond drill to make water bongs, and I used to melt bottles in a crucible to make molds of figurines but this is definitely new to me awesome idea

@viorsa8200 Жыл бұрын

Magnífico tutorial maestro, una buena técnica, aunque no garantiza un resultado satisfactorio, algunas veces, gracias por compartir sus conocimientos y experiencias, un saludo cordial y por supuesto un gran like desde Narón (Galicia) 🤓🌞

@vex9596 Жыл бұрын

I'd recommend using a nichrome wire instead of the soldering iron. It's pretty cheap and comes in various gauges, so you could use a relatively thin gauge if you wanted a high precision. For people not familiar with nichrome, it's basically a metal wire commonly used as a heating element. When electric current flows through it, it will quickly heat up. It can be used with both AC and DC, but please don't hook it to your outlet unless you know what you're doing. Using a low voltage power supply (5-24V) with high current rating is probably the safest approach. If you don't have such a power supply and don't want to spend a lot of money, you can modify an old computer power supply (ATX PSU) quite easily and it'll do the trick. Also, you should probably wear gloves when cutting the glass, and use sand paper to smooth it out after cutting so it can be safely handled.

@timb.timberly3335 Жыл бұрын

What about a wood burning tool?

@vex9596 Жыл бұрын

@@timb.timberly3335 That's essentially just a soldering iron with various tip shapes. Many of those tips are not very well suited for this due to low thermal mass or poor surface contact, but it's not impossible to use it for the task

@peetsnort Жыл бұрын

And Khantal wire is fantastic. Melting point is 1500 °celcius

@curiosidadesdelbuho8514 Жыл бұрын

Sigue artes del buho

@tihzho Жыл бұрын

Use the nichrome wire with a 0-130VAC variac - with attention to the current.

@albamartinez6613 Жыл бұрын

INCREIBLE...ENCANTADOR TRABAJO...MUCHA DEDICACION..👍👍👍👍👍😍😍

@Worthi_Creations Жыл бұрын

Awesome idea! Beautiful art!!

@WiKiTWoNKa Жыл бұрын

well I'm not very sure of what practical purpose this would be but I do think this is very interesting and perhaps it can be used for an art project or maybe some kind of planting pot or something this is definitely a conversation piece and I love it

@laurin4405 Жыл бұрын

Indeed... I dunno what it would be used for either; but it looks cool as hell 😉

@polka23dot70 Жыл бұрын

Wikipedia article about 'wafer dicing' describes similar technologies.

@albingrahn5576 Жыл бұрын

@@laurin4405 it's a decoration, it's use IS that it looks cool

@AlwaysBolttheBird Жыл бұрын

I figured vase for fake flowers

@nikoravnikar Жыл бұрын

And than u have videeos abaut how to drink water so this is not so usless

@friedrichmarkus3574 Жыл бұрын

You could also smoothen the edges with a propane torch. The problem with your instruction is, that you still have thermic tension in the glas, after operating with the soldier iron. You need a kiln and heat it slowly up to about 500 to 550 degree Celsius, and let it cool down slowly over the night. This way the glas is much more endurable, and will not split so easy.

@frantisekvihara2641 Жыл бұрын

@keithrobertson5110 Жыл бұрын

Well said, your better than him. What is thermic tension?

@rebelrat3594 Жыл бұрын

Well the way he does this the bottle would explode he's a lucky bastard

@taylordavis1543 Жыл бұрын

You can't just torch the edges without first preheating the glass. Thermic tension isn't the technical term. This is thermal shocking due to the expansion of the glass near the heated zone. While there are tensile stresses present in the glass when heated with the soldering iron those stresses are not permanent stresses and annealing is not required.

@Mr-D143 Жыл бұрын

@@taylordavis1543 thank you. You saved me from having to explain how it works, ha

@brahamprakashmundra572 7 күн бұрын

Great idea

@tony359 Жыл бұрын

very nice technique, thanks for sharing!

@orly2663 Жыл бұрын

Thats really really cool, thanks for the video!!

@brendagould13 3 ай бұрын

I love them both!!

@llpz8107 Жыл бұрын

Es maravilloso el resultado, felicidades.

@hassanal-mosawi4235 Жыл бұрын

Thanks for sharing that!

@manjitsaimbi3730 9 күн бұрын

never managed to cut a glass bottle. Will try with your method. Thankyou

@michaelsangma4569 Жыл бұрын

Very good idea ❤️👏Love to watch ❤️

@jamesstephens1539 Ай бұрын

I like the bottles the best awesome work Thank You

@Bunny-wc2mu Жыл бұрын

So simple for kids Recommended❤ do try this at home

@jegaad1 18 күн бұрын

super cool

@yourfactstory Ай бұрын

Really cool ! Thanks!!

@efremsa Ай бұрын

Simple and Amazing!

@mark-nightingale 7 ай бұрын

Great informative video. Well done.

@ryancrume Жыл бұрын

nice work, I didn't know that trick with the soldering iron!

@jaabnegat 10 ай бұрын

Jestem zdumiony, że takie ciecie jest w ogóle możliwe! Dziękuję za film Pozdrawiam

@MCsCreations Жыл бұрын

Brilliant, dude! Really fantastic work! 😃 Stay safe there with your family! 🖖😊

@GoblinKing13 Жыл бұрын

i ended up making a successful online business selling these after watching this video shipping globally so thanks for that :D

@mukeshsharma4433 8 ай бұрын

You are a great artist. It's a unique idea. Weldon.

@WGRa Жыл бұрын

YOU"RE AWESOME! Thank You so much :D

@mhughes1160 Жыл бұрын

Great video Thanks for sharing 👍

@MrReasonabubble Жыл бұрын

Great work, great presentation, great filming, great narration. Thank you.

@curiosidadesdelbuho8514 Жыл бұрын

Sigue artes del búho

@Lextrow Жыл бұрын

@@curiosidadesdelbuho8514 no

@miklblitz Жыл бұрын

great job, thank you

@laurin4405 Жыл бұрын

WoW... Never knew about using Heat as an aid when cutting Glass... That Soldering Iron just makes the score follow/chase the heat... Neat! Thanks

@johngunning2123 Жыл бұрын

Brilliant!

@wasanaboxing Жыл бұрын

Good job Thanks for sharing my friend

@salahh89 Жыл бұрын

Great and original idea 👏👏

@sierraecho884 7 ай бұрын

Pretty cool, nice tutorial.

@lewdards1127 Жыл бұрын

very creative thanks for sharing

@psylegio Жыл бұрын

Brilliant! I would really like to give this a try! How did you cut the label of the Jack Daniels bottle without burning it? Did you remove it first, cut it and then put it back? ETA: maybe you did burn it but then sanded the edges off.

@mildredcordero4949 11 ай бұрын

That's nice, I have a few bottles to try...

@voodetraike1172 3 ай бұрын

Show de bola parabéns 👏🏻👏🏻👏🏻👏🏻👏🏻

@washingtonbrasilino8063 Жыл бұрын

Very good !!!

@vogtland_holz Жыл бұрын

Great Idea 👍

@miguelaustralia3473 Жыл бұрын

Great job mate

@spiritwhispers667 Ай бұрын

brilliant

@bestillpatience6380 Жыл бұрын

I'm still waiting on the "SIMPLE TOOL" part ...😜🤪🤷🏿‍♂️

@mamaj6028 Жыл бұрын

Awesome !! 💖💖 Thanks

@Patbonsaitv 9 ай бұрын

very good idea

@vthayaparan6176 Жыл бұрын

Thank you so much

@savorymaghrebfoodalgeriamo997 8 ай бұрын

Thank you

@akhoosain1412 Жыл бұрын

Crazy idea boss

@vdsmade Жыл бұрын

Great job 👽👍

@koko.art74 Жыл бұрын

beautiful art. greetings from Indonesia 😊😊

@NickC_222 Жыл бұрын

This is so cool.

@oysterjamivxx Ай бұрын

title should be 'how do make hazardous decorations'

@menenowtv2348 Ай бұрын

Thats really true

@menenowtv2348 Ай бұрын

Its really hazardous

@pedroalvarez7882 Жыл бұрын

nice simple tool

@Sheryv Жыл бұрын

Great.. will try ..

@Foodiemjv Жыл бұрын

Thankx dear

@sunshineravens 11 ай бұрын

The finished bottle looks amazing. 👌 I was actually looking for how to make circular holes in glass, but got sucked into this which is much cooler. 😀

@DeadlyVenomKing Жыл бұрын

Whole new Art

@ambergris9359 Жыл бұрын

Can't wait to display this into my living room and wait till my family get cut ❤️

@ashleylordess5621 Жыл бұрын

🤣

@ekowcharis2465 16 күн бұрын

Lmao 🤣😆😆

@wallamkupardonmon513 Жыл бұрын

Excellent

@minoodew195 Жыл бұрын

Awesome ❤️🙏

@BigDoughieG780 Жыл бұрын

Genius!

@jessicagalyon5840 Жыл бұрын

Very cool! Will hot & cold water work to crack the glass this way? I don’t have that tool

@mbuguapetrov1280 Жыл бұрын

Nice idea

@superbob1548 Ай бұрын

very impresive 👍😇

@SaniyaSachinm Жыл бұрын

Thanks I got New KZfaq Channel from this Video to Learn More Knowledge.

@farbinvest8069 Жыл бұрын

🔴Verry interesting. Thanks

@RealtalkYo Жыл бұрын

this is art

@marieline23 Жыл бұрын

Wow amazing

@rofhiwamulaudzi2335 Жыл бұрын

Love it

@bonaventuramatulile1345 Жыл бұрын

Awesome..👍💯

@brucecook502 Жыл бұрын

That was pretty clever. Cool video :-)

@paulkorakas8778 Жыл бұрын

GENIUS. YOU MAST HAVE SPENT SOME DAYS EXPERIMENTING, OR WEEKS NO MATER BUG BIG BRAVISIMO FROM ATHENS GREECE

@garyrendano4717 Жыл бұрын

pretty cool.

@asaljdsimplecraft2917 Жыл бұрын

Nice video

@jrpcoins Жыл бұрын

I haven't finished watching I'm 30 seconds in but I'm guessing your going to use yarn soaked in lantern oil and light it and dunk it in cold water? Idk I'll keep watching

@BreezeLive98 Жыл бұрын

You Genius! When I tried to make a homemade bong from a bottle for wine, I suffered with a bunch of attempts with a wire, combustible substance and a temperature difference in ice water!

@danielg2946 Жыл бұрын

very cool

@PriyankaPradhan-vs9xn Ай бұрын

Nice

@orphanmeat4sale24 Жыл бұрын

Ima try this.

@levankhvichia1910 Жыл бұрын

thx bro ))) take care )))

@AhmedBiomy 11 ай бұрын

wow awesome

@makantahi3731 Ай бұрын

very well

@austinbrockner6405 Жыл бұрын

Wet your score line before heating. I don’t know if it’s the water evaporating causing irregular temperature but it’s worked better than dry heating the score line in my experience