Thanks. This definitely does a good job at separating out the fines. Thanks for watching.

Should have done this in the first place. I made a mistake trying that new grizzly cyclone. Thanks for watching.

Thanks for watching.

Thanks for watching.

Thank you very much. Just sharing ideas that work for me that may interest others. Thanks for watching.

Thanks for watching.

Thanks. Looks like this dust deputy will work great. Thanks for watching.

Thanks. Still works great. Thanks for watching.

Thanks. This dust deputy has worked awesome since installing it. Not one issue with the barrels. Just wish they made 75 gallon barrels so they wouldn't fill up so fast. Leaks down there can really lower the efficiency. Thanks for watching .

Thanks. it works great for my needs. Thanks for watching.

Glad to hear it. Thanks for watching.

That makes it easy to change drums. Thanks for watching.

This has worked great so far. Thanks for watching.

Thanks. It pretty much seals itself. Nice springy hose. Thanks for watching.

Thanks. This dust deputy has worked great so far. Thanks for watching.

Thanks. Keep it simple. Thanks for watching.

Works great and with the springy hose the top doesn't really need clamping. Thanks for watching.

Thanks. This cyclone does a really good job at separating out the fine dust. Thanks for watching.

Thanks. The only thing enjoying the cold is my kale. Hopefully the weather forecast is right and warmth is on the way. This is the latest that we have used the wood stove ever. Thanks for watching

This has worked out great so far. Thanks for watching and subbing.

Just a simple over center cam that's easy to figure out. Thanks for watching.

Thanks. I am having much better performance from the dust deputy that makes it all worthwhile. Thanks for watching.

Thanks for watching.

Thanks for watching.

I was lucky that the hose had enough spring in it to make everything work and lock right. Thanks for watching.

Thanks. Hopefully this will solve my dust problems. All the machines also seem to have better suction now also. Thanks for watching.

I read that dust deputies work best with a section of hose between them and the barrel so I went this way. I doubt that it makes a difference. Thanks for watching.

@@unemployedredneckhillbilly2023 I went back and read what I originally wrote. I meant to say that I like your setup better than mine! :-)

The Dust Deputy works great. Thanks for watching.

They make it easy to swap out the barrel. Thanks for watching.

The dust deputy's are definitely the most affordable solution for a home shop that actually work. Thanks for watching.

That piece of springy hose is what made the cam possible. You could probably just use standard hose and a couple gas springs also. Over center cams are very easy to work out. Thanks for watching.

Thanks. Looks like this will work good. Thanks for watching.

It works great with the stiff hose. Thanks for watching.

where can we get a drawing/outline of the cams. or a link where you can find some templets. TRhanks, Craig k910dog@gmail.com

You definitely don't want them to overfill. Can't see the level from across the room but it worked for me. Someday I want to add a sensor. This dust deputy is much more efficient then that grizzly cyclone. Thanks for watching.

They are great barrels. The standard plastic ones he had were at least 25% heavier along with being taller, having thicker walls, and smaller diameter. I wanted metal but the weight of these sold me. Thanks for watching.

I am guessing they used it at the local Heluva cheese factory to make horseradish cheddar curds. The dust deputy works real good. Thanks for watching.

That hose is like a big coil spring and the cam makes it very easy to compress. Just trying to figure out if the barrel needs a ground wire or not. Thanks for watching.

Very controversial subject on the internet. Ground is probably not needed but can't hurt to add it.

Thanks for watching.

It's just material handling hose that is available if you search. Thanks for watching.

Thanks. There is an old shop tour but I plan on a new one soon. I am in the process of moving things around to optimize the room. Thanks for watching

instablaster.

I have a little gear motor ready to go if this works out. We think alike. So far this dust deputy is doing a great job. Thanks for watching.

That's part of the plan and the main reason I switched over. The grizzly cyclone let most of the dust from my 24 inch thickness sander pass right through into the filter. Moving things around now to eventually switch over to one of the open thickness sanders that can do 3 ft wide. No big wood projects now as I am gearing up to get the garden started. Thanks for watching

It's the biggest battle for a woodworker. Thanks for watching.

Mine go in the woodstove. Thanks for watching.

I can't imagine removing the top when it was full. Brings tears to my eyes and makes me crave shrimp 😋. Thanks for watching.

imagine fresh horseradish 200 lbs respirator work

Made lots of nice kindling for the woodstove with a lot of it. A little sawmill is the best way to have access to high quality affordable lumber if you plan on doing a lot of woodworking. Mine paid for itself the first use. My blower is 2 hp and works great for my needs with this dust deputy. l just started building a new cnc router and this setup should handle it with no problem. Have fun. Thanks for watching.

Somebody used 110 gallons of it. Glad they cleaned it out so I didn't have to cry. Thanks for watching.

Thanks for watching.

It has been fine so far and it runs for a couple hours with the cnc router without a problem yet. I really haven't worried about it because I will just buy a US motor if it goes. The dust deputy works great. Thanks for watching.

I can't use wd40 in the house anymore. My wife's chemical sensitivity cannot tolerate any of it. Thanks for watching.

I use 4 inch for everything but someday want to go to 5 Inch main. 6 Inch needs 2 - 4 inch gates open and my blower can't handle that.Thanks for watching.

Any air in the bottom drum and the cyclone is worthless. You need perfect seal for it to work. Thanks for watching.

@@unemployedredneckhillbilly2023 Yeah, I thought that might be the case. Thanks for the quick answer!

It was a cutoff from my cyclone rake. There are companies that sell it by the foot if you search. Thanks for watching.

The spring in the tube is just enough to flatten the lip on the plastic lid to keep initial start up air leaks from being a problem. Dust Deputy works great so far. Thanks for watching.

@@unemployedredneckhillbilly2023 Gotcha. Good point.

its very simple. There are 3 pivot points and to lock open you have to place the center one so when open the other 2 are behind it. Simple over center cam. Lay it out on cardboard and you will see. Thanks for watching.

I use a flashlight and can see fine. Thanks for watching.

To get some of the noise as far away from the machines as possible. Thanks for watching.

It is just a very simple over center cam that really doesn't need a template. Thanks for watching.

Me too!

That will require bigger ducts and a cyclone rated for the cfm you will be using. Every 4 inch gate will flow 350 to 400 cfm depending on duct work and blower capabilities. This cyclone is perfect for my 2 hp blower. Thanks for watching.

@@unemployedredneckhillbilly2023 Yeah, but where did you find the pattern for the 5" cyclone? Or did you originate it following some formula? My hope is that I'll find a lead on how to do the same for 6". Anybody?

It came on my grizzly 2 hp dust collector. I think they have many different sizes .Thanks for watching.

Actually Bill Pence, the dust collection expert, recommends not using the paddle type. They wear out your filter more quickly. Just use an air hose to blow from the outside, especially with a cyclone since very little dust is going to make it to the filter.

Still no problems. It doesn't see heavy usage. If you have an old blower this is still working. If you are buying new get the better motor. Thanks for watching.

Check with your local building codes. Most won't allow you to pull a vacuum in your house without a replacement source for exhaust so fumes from things like furnaces don't get sucked into the house. Thanks for watching.

@@unemployedredneckhillbilly2023 thanks- makes sense, my garage is definitely not air tight, so make up air shouldn't be a problem but I will definitely check it out with them. Do you have a video about your filter set up in case its not allowed?

its the first video about installing the system. Back just a little way.

Yes the 2 hp blower. I moved half of the sound back to that corner and the wood rack seems to absorb much of it plus sounds drop off the further you are from the source. I have some sound measurements in the next video. Thanks for watching.

I think I have the dwg files on that computer but it is all torn apart now to move and rebuild the router with better linear slides and ball screws. It will be a while till it is fired up again. Thanks for watching.

Thanks for watching.

It takes some time to learn to use any program. For CNC routing you may want to look at V Carve. It seems to be the easiest program to get started with and handles the cam end in the background. They have a demo version you could try. Thanks for watching.

No link it's just from my old grizzly dust collector and I had to modify it. I think oneida sells filters. Thanks for watching.

I am only running 4 inch duct now but plan on upgrading to 5 someday. My 2 hp blower can only really handle one 4 inch gate open at a time so I figured that to be about 400 cfm max through the dust deputy and the xl had a minimum higher then that so I went with the super. You could always contact Oneida to see what they recommend for your runs. I understand if you upgrade to 6 inch mains you need 2- 4 inch gate valves open to keep the chips suspended. This works great for me so far. Thanks for watching.

@@unemployedredneckhillbilly2023 So sounds like it would be prudent to go with the 5" Dust Deputy instead of the 6" XL, as I have the same blower as you. As I have a small amount of 6" duct I wonder if there would be issues running that as a trunk line and using 5" as the drops with a short piece of 4" flex to the machine? Thank you again for your time. Jeff

Contact Oneida because I feel 6 is to large for single 4 inch gates and my blower.

I don't think any was lost. I only open one 4 inch gate at a time that is only using 1/3 of the available CFM of the blower and this blower has a good static pressure rating. My 4 inch lines account for the biggest loss. Thanks for watching.

@@unemployedredneckhillbilly2023 I was just curious. Others have reported ~30-50% cfm loss when adding the dust deputy into the system

If you have a blower with a low static pressure rating you will see large losses. I think mine is rated 16 inches max sp

It was a cutoff from my cyclone rake hose. I think McMaster Carr has similar material handling hose by the foot. Thanks for watching.

Cutoff from my cyclone rake. It's available online. Search for material handling hose. Thanks for watching.

You would have to put a spacer and vacuum hose to the bottom and figure out how to get a perfect seal at the lid. Thanks for watching.

The entire lenght of all pipes have 12 ga braided bare copper in them that is terminated on each machine through the flex drops and then all tied back to the cyclone ground and frame. Haven't seen any problem yet. I think the cyclone has a conductive additive to the plastic also. No real friction in the drum as the chips fall.

Mine was a cutoff from my cyclone rake hose. Any 8 inch id spiral hose should work. I usually find things like this at McMaster carr. Thanks for watching.

You buy a dust collector with one. Thanks for watching.

Just the thought of 55 gallons of horseradish brings tears to my eyes. Now I have a craving for it and have to go out and dig some up soon. Thanks for watching.

@@unemployedredneckhillbilly2023 -- Yeah, I was definitely tempted to go up to the local market and get a couple of pounds of shrimp... I have some horseradish that I picked up when I was last in the UK that I preserved with some vinegar over there and brought back (thus bypassing the restrictions on bringing back "fresh fruits and vegetables")... For some reason, I hadn't been able to find any fresh horseradish locally... You would think that in a city as large as Houston, it wouldn't be that difficult to find, but for some reason I could not... I stumbled across some in a grocery store either in the UK or Ireland for about 1 GBP or 1 Euro for a piece that was maybe half a kilo in size... Decided to make fajitas instead though since I had some milk that was getting towards it's expiration date... Tortillas made with milk, salt, and a bit of baking soda are more like an Indian nom since they rise slightly...

I have a batch growing in the garden I have to start digging. You should check farmers markets as it will grow anywhere.

I think you would need a weight but not sure. As long as the lid seal is perfect it should stay down. Try it and you will know for sure. Thanks for watching.

I have braided ground wires through all the pipes tied to the machines and blower to discharge static from plastic. Also a ground wire to the drum lid. Haven't had a problem yet . Metal pipes and cyclone are the best option if you have the money for a home shop and are requiredfor a commercial shop. Thanks for watching.

Hoping to be able to work outside tomorrow. We have been having crazy weather. In the 20s again tonight and the farmers are worried about the fruit crops with this cold. Thanks for watching.

Well, I thought the filter is used to prevent dust getting into the lungs which makes it kinda weird to blow the dust around while cleaning the filter without wearing a mask?!

Thanks for watching.

Those files are all gone when Fusion shut down the free account. Only should take 5 minutes to work out. Thanks for watching.

Still works great. I highly recommend the dust deputy. Thanks for watching.

That would have been nice. Have to dig some of mine up and have a good cry grating it. Thanks for watching.

No. It's just a simple over center cam anyone should be able to figure out based on their system dimensions. Everyone's will be different. Thanks for watching.

Any chance you could tell me what size flex hose you used and where it is available from? Really like how you set it up and I want to set mine up similar Thanks

It was leftover 8 inch hose from my cyclone rake. I don't think they just sell a foot.

Thanks for watching.

It's 1 micron. Cleaner then the air outside. Thanks for watching.

There's a 12 gauge wire inside all the pipes grounded back to the box and each machine. 12 years now with no problems. Thanks for watching.

There has never been a small shop explosion caused by static electricity. My entire shop dust collection is 6" and 4" pvc into a Clearvue dust collector. I also have a small grounding wire on the outside of my piping, secured with self-tapping screws through the piping wall. I don't have any problems with static. Check out billpentz.com/woodworking/cyclone/ for the most comprehensive research ever done on dust and dust collection.

Its all grounded. 12 ga wire in all pipes terminated at each machine and grounded to my earth ground. There's a video way back showing the grounding. Thanks for watching.

Because KZfaq gives you no way to verify the age of the viewer and runs targeted adds against videos that are not made for kids. Thanks for watching.

That 1 inch section at the bottom definitely was cracked through. Thanks for watching.

I guess that I burned 6 of those giant rubbermaid containers of inventory the last couple weeks then. Just trying to free up room. There's plenty more growing in the backyard 😉. I do save the exotic scraps no matter how small they are. Thanks for watching.

The other plastic barrels he had were food grade also but at least 25% heavier in weight and different size. Don't see any static problems so they should work great. Thanks for watching.

Then you missed the best part for not being open to modern technology. Thanks for watching.