Dust Collector Upgrades / 2 Stage Harbor Freight Dust Collection

Рет қаралды 148,616

Күн бұрын

How to upgrade and improve the performance dust collector in your woodworking shop! Turn that single stage dust collector into a 2 stage dust collector with a dust separator cyclone! #DustCollection #DustSeparator #HarborFreight
SHOP HERE:
Dust Collectors: amzn.to/3FrHgRS
Super Dust Deputy: amzn.to/4aiyKF1
Large Screw Top Drum: amzn.to/3Cu9k9d
Wynn Canister Filter: wynnenv.com/woodworking-filters/
Other Canister Filters: amzn.to/3Kfi18I
Gamma Seal Bucket Lid: amzn.to/3A10BYI
5 Gallon Bucket: amzn.to/3FsJr7E
Dust Collector Accessories: amzn.to/3ttPgiW
Heavy Duty Silicone Sealant: amzn.to/3HWD8Lg
Clear Lexan: amzn.to/3riIWrH
Dust Collector Blast Gates: amzn.to/3no1XIg
3 Tool Dust Collector Kit: amzn.to/3qsHFyZ
5in Flange: amzn.to/3kpNH3v
5in to 6in reducer: amzn.to/3xSmYzA
_______________________________________________________
Kobalt 10in Miter Saw: amzn.to/3ezSFEi
Other Miter Saws: amzn.to/3eBMxLX
Dewalt Framing Nail Gun: amzn.to/3FPkYKe
Skil Table Saw: amzn.to/2W0ZoRt
Wen Track Saw: amzn.to/3BfTCM5
Track Saw Track: amzn.to/3kuScHw
Drill/Driver Set: amzn.to/3kw0ezT
Jig Saw: amzn.to/3Gzu8eH
Brad Nailer: amzn.to/3lgznHM
Drill Press: amzn.to/3odD01x
Orbital Sander: amzn.to/3kzktwt
Belt/Spindle Sanders: amzn.to/308z4HG
Shop Vac: amzn.to/2UpolW8
Dust Collectors: amzn.to/3FrHgRS
Dustright Dust Separator: amzn.to/3rmzvHq
Duststopper Bucket Separator: amzn.to/3kFIPVq
Clamps: amzn.to/3zi3tij
Wood Glue: amzn.to/3k93vE7
Follow Us on:
Facebook: patriotdiy
Instagram: @PatriotDIY
Etsy: www.etsy.com/shop/PatriotDIY
Thanks For Watching! Please Like, Share, and Subscribe!

Пікірлер: 340

@davejones8770 3 ай бұрын

I've watched a lot of these kinds of 2-stage filter setup videos, and I liked yours best. Thank you for putting this together. I'm getting ready to copy your build almost exactly. Only thing I'm doing differently is using a clear bucket under the filter so I can see if there's anything dropping into the bucket. Probably not needed, but it'll keep me from constantly checking it. lol

@PatriotDIY 3 ай бұрын

Smart

@amante762 4 ай бұрын

This is one of the first dust collection build videos that don't have me scratching my head at the decision making. Great video, nicely documented steps. I'm going to price these parts and watch this while I build it. Thanks for your efforts.

@tomnorcross4837 2 жыл бұрын

Probably the best video I’ve seen on converting the HF dust collector. I think I’m gonna give it a go

@xDerDerx 2 жыл бұрын

Definitely one of the best videos.

@carlawatts288 Жыл бұрын

I totally agree. I am definitely going to redesign my dust collection to this configuration.

@jeffstewart7434 Жыл бұрын

My thoughts exactly! I too, am not in the budget to spend 1-2 G’s on a DC, and also have seen for years that at least the heart of the HF dc was a great value. I saved this video so that in the future, when i build this EXACT system, I can pull it back up lol

@vinaykumarreddy4014 Жыл бұрын

True

@tristannaylor5197 2 жыл бұрын

love the gun in the waistband while working hahaha, very patriotic indeed!

@dutch4505 4 ай бұрын

Seen close to a hundred of these types of videos to research how to set up dust collection in my new shop. Your setup and video instruction are the best. I plan to use your method this summer. Thanks!

@PatriotDIY 4 ай бұрын

Happy to help!

@elkskiutah8204 4 ай бұрын

it is a slick looking system what did you use for that reducer from 5" blower inlet to 6" cyclone exit. and have you heard if a 31 gal galvanized trash can will not collapse or not?

@PatriotDIY 4 ай бұрын

@elkskiutah8204 I used a 5 to 6 metal reducer from the ducting section of lowes. Had to crimp one end to make it work. Not sure about the trashcan

@cyrilnorrie8450 2 ай бұрын

This is a great set-up and it will be nice when it's time to empty the sawdust. Your lungs will appreciate the upgrades you've made. Thanks for showing us your design and I will be using ideas from watching this video.

@MrMaacin05 8 ай бұрын

Literally just finished this overhaul and it is a night and day difference. Well thought out and executed. Thank you.

@paulhopkins1905 28 күн бұрын

You gave me some good ideas. I'm working on a DIY system from an old bounce house blower

@JesusChangesEverything Жыл бұрын

I’ve watched 20 of these trying to figure out how I’m going to do it. I saw yours and said, “Yes!”

@JennieClagettGray Жыл бұрын

I definitely plan to make these upgrades! Also, I could listen to you talk all day with that accent.

@TripleDimension 8 ай бұрын

I bought the same dust collector and plan on upgrading it in a similar way. I'm starting to think we're not all that smart though. The cyclone and upgraded filter is around $500 in upgrades alone. $800 would probably buy a pretty decent name brand dust collector...lol

@andrewr2650 3 ай бұрын

Yes, you could buy something decent for that price (1.5HP singe stage with a MERV 15 filter). That will cover any tool that uses up to a single 4" dust port no problem. Primary downside to the single stage is needing to clean out the filter every time you generate a bag of sawdust and its really messy. To get into a 2HP 2 stage collector with the filter like he built in this video your $1500-$2000, so you are cutting costs about in half, plus you get to say you built it yourself

@calprinicus Жыл бұрын

This is a great system. Thanks for the detailed look into setup. Looks like it's time for me to upgrade shop!

@davestewart9289 4 ай бұрын

I’ve just completed a setup like this with a few small adjustments since I wasn’t installing in a corner. Thank you for this video and awesome improvement to the harbor freight dust collector!

@GyWO10 2 жыл бұрын

Great video! Thanks for figuring this out & for sharing!!

@robg7913 Жыл бұрын

Easily the best video I’ve seen on this subject - the engineering is well thought out and preserves the maximum suction/airflow possible - really great job on this- install looks super clean

@alexanderalvarado9675 Жыл бұрын

Definitely using this design as inspiration for my shop dust collection. Awesome video, loved the wailing guitar background music!

@ryanb963 Жыл бұрын

Thanks! ive been putting this off for to long. This video was well done short and to the point! Many thanks.

@johnoquinn6740 Жыл бұрын

Fabulous idea, and great video! Definitely saving this for future reference!! 🤗👍👍

@davidlynch7666 9 ай бұрын

I brought home my new (used) 2 stage Jet with the canister filter and I sat for a day and a half wondering how I’m going to set my system up. I kid you not I was drawing out a wall mounted system almost identical to this and I was going to make some room in my 1 car shop tomorrow. You’re the first person I’ve come across that did it this way. I thought I was crazy but apparently it works great lol. Cheers

@Bruceanddenise Жыл бұрын

Thanks for sharing your work!

@DHSNewsTeam Жыл бұрын

I love your design and great quality video.

@paulmorgan1897 Жыл бұрын

Thank you for adding all the links!

@mikeg3660 Жыл бұрын

Great job… just what I was looking for. Thanks.

@matthewcluskey7659 9 ай бұрын

Get after it bud! Nice video! I received a HF dust collector for father's day and due to other obligations it's been sitting in the corner while I do my setup/mod research after the kids get to bed. Your video on this topic is up there with or better than stumpy nubs' video on the topic, which is high praise. Continue to do work, buddy! 🇺🇲🤙

@josephhunt6207 7 ай бұрын

Just finished my collector change over. Thanks for your ideas!

@ghost00tj Жыл бұрын

Looks great. ordered a bunch off your list. Time to improve my dust collection.

@u.s.machineryassociates30 7 ай бұрын

I am starting to build this duct collection system. Great design and your video(s) are really informative. Keep up the great work.

@josephcorridori6244 Жыл бұрын

This is the video I've been looking for. Thanks for this, and for the links.

@witt6560 3 ай бұрын

great video. Definitely making some changes to my system. Well done!

@monteglover4133 Жыл бұрын

A small safety item lower the blade guard/guide on your bandsaw for safety and better cuts. Using a translucent 55 gallon barrels let you see how much dust you have collected.

@ericeinsmann5559 Жыл бұрын

Nice job! That's almost identical to the dust collector I made! I used a trash can instead of a barrel and my Y connector on dust deputy, one port goes outside through the wall and the other side is for inside. It works great

@northernblueww7406 2 жыл бұрын

Excellent Video!

@rikityrik Жыл бұрын

That’s an awesome set up, great video!

@PatriotDIY Жыл бұрын

thanks

@svlotoy 11 ай бұрын

You had a sub at patriot. Great and simple video as well. You made me feel comfortable getting that harbor freight dust collector.

@robjackson2522 6 ай бұрын

I just changed impeller to a wen larger impeller, best 50$ I've spent. Easy to do and increased volume and suction. Highly recommend!

@PatriotDIY 6 ай бұрын

You have a link?

@robjackson2522 6 ай бұрын

Wen 3403-22 turbo fan

@elkskiutah8204 4 ай бұрын

Did you leave the intake 5"? I got my wen. But I saw a video where a guy was testing his flow after each change and when his friend sent him a wooden cover with a 6" plastic flange on it. It didn't increase his CFM.

@robjackson2522 4 ай бұрын

Left it 5" works great, enjoy!

@PawPawsClan Жыл бұрын

Very nice, I particularly like the 5 gal bucket rather than other things I've seen.

@823Steve Жыл бұрын

excellent and very ingenious!

@calebstickel7150 Жыл бұрын

great instructional video! very clear

@steveputland4324 Жыл бұрын

Great Job ! 👍👍

@RichardBronson-ui7cx Жыл бұрын

Finding this video was great timing. I bought the same dust collector from HF with wanting to do the same thing! Thank you for sharing this

@PatriotDIY Жыл бұрын

Happy to help

@daveo.5479 2 жыл бұрын

Can’t believe there aren’t more comments. Beautiful setup!!

@jonnymo4728 8 ай бұрын

Wow. Awesome. The entire deal. Thank you. Love your bandsaw. I just captured one like it for $100.

@kylesullivan47 Жыл бұрын

This is great, I did a ton of research and this setup seemed like the optimal combo, now you made it much easier to visualize, design and mount up. Thank you!

@GageDrums 10 ай бұрын

Have you done it? I'm about to. How well does it work?

@kylesullivan47 10 ай бұрын

@@GageDrums I didn’t but I think there’s a 20% off sale at harbor freight now. At the time the cost and time investment wasn’t of value after you add in the Wynn filter and Oneida cost, plus duct work around my shop. I got a used Oneida mini gorilla on a stand for around $900 instead

@dgb5820 Жыл бұрын

Looks great

@xxUncleBuckxx 6 ай бұрын

Awesome video.

@linelife11 3 ай бұрын

Nice simple informative video and for that, I’ll subscribe. Nicely done man!

@PatriotDIY 3 ай бұрын

Thanks

@philhugill8458 3 ай бұрын

Good work....BUD.....thanks a lot for this........Your are a super KZfaq teacher !!!!!

@joedance14 22 күн бұрын

Watched many videos on this and related topics, and I keep returning to this one, to review some portion, to get some detail…It was really well done, nicely built, looks great. What switch was used? Could not find it in the video or description. Trying to find a similar switch for a HF 2HP dust collector (115 Volt 20 Amp).

@DHSNewsTeam Жыл бұрын

I used his design and it was perfect. Thanks.

@PatriotDIY Жыл бұрын

Happy to help

@woodworksbygrampies1284 9 ай бұрын

Hola! 🖐Wow! You really stepped up that system, it looks like you are going to give it a run for it's money. How has it performed now that you have had it in use for a while? Have you made any changes or modifications? Thanks for the video and all the info. Take care and have a good one, Adios!👊

@gtuttle4 8 ай бұрын

Great idea!

@dalemcbride7299 2 жыл бұрын

nice job. exactly what I need to do. I do not have a corner to use so I will be building a right angle bracket to hold the blower. Thanks for the Vid. It will help me a bunch.

@PatriotDIY 2 жыл бұрын

Glad I could help! Thanks

@robertspina4503 2 жыл бұрын

Great video I am gonna be using some of your ideas

@PatriotDIY 2 жыл бұрын

Thanks!

@newt2010 Ай бұрын

Great upgrade and great video and detail. I have been doing the same thing. I have everything except for the new large filter. Bloody things are pricey. Cheers

@bobrayman1036 4 ай бұрын

Hi, great video. I'm in the process of doing this now. I went with a replacement for the Radeks Workshop filter instead of the Wynn. I hope that wasn't a mistake. Haven't decided on the Super Dust Deputy or building a Thien Sepatator. Thanks!

@randypowell4799 Жыл бұрын

good information

@bskelly 2 жыл бұрын

Well done video and great tips! I’m planning to tackle the same job this weekend and will be stealing some of your ideas. The only addition I have is that I’m adding the Rikon impeller upgrade as well. Thanks for making this one. Definitely worth a sub!

@yeagerda Жыл бұрын

Details please... where can we get it? and... did you have a chance to quantify performance impact?

@dirtycurty1202 Жыл бұрын

I know this is a late comment since I'm just now finding this post, I have also seen where the Wen 3403-22 impeller also works the same as the Rikon impeller but is cheaper price wise. If you happen to one the lucky ones like me that can exhaust the discharge strait out a window or wall without a filter attached that is the BEST way to go since there is NO restriction. My Father-in-Law was able to do this and he said it was night and day between the difference. I'm gonna be doing mine the same way but I think I'm gonna add the Wen impeller. Just think about it this way and it was mentioned in the video, you can't suck dust and debris any faster then what you can push it out the other side, the least resistance at the end of the line the more you can pull at the suction side.

@rolf3727 Жыл бұрын

I am going to check out the wen 3403-22

@mambojambostudio 3 ай бұрын

yep, i like yours the best. good job!

@PatriotDIY 3 ай бұрын

Thanks

@rickyjohnson7780 2 жыл бұрын

I really like your common sense easy to watch videos. You go straight to the heart of the subject your videos are about without all the extraneous crap on others. A BIG BZ to you sir (bravo Zulu, it's a Navy thing) I just finished my 24x50 metal garage am insulating now following your other videos and this dust collector is definitely going in it next. Thanks for all the links I'm using them to order so materials will be ready when insulation is complete. Thanks for sharing all your knowledge.

@3DHP Жыл бұрын

Great video, Thanks for sharing. I'm getting ready to mount mine and seen many videos on it. I 3d Printed my large cyclone but have not tested yet. Love your setup.Since this video is a little over a year old,how its it all working out.The 5 gallon bucket idea instead of a bag for minor debris.

@ryanobarr 10 ай бұрын

Great how-to video! Keep it up! And glad to see people conceal-carry no matter where they are!!! Makes the name of the channel make a ton of sense!

@jd1399 Жыл бұрын

Great work, and very quite. would love to see what your cfm reading is at each port and the length of pipe

@scottkrosser9233 5 ай бұрын

Wow! That was great. Mines not as pretty as yours and you made it seem a lot easier but I got it done... Thanks for your help. It works great!!!

@PatriotDIY 5 ай бұрын

Happy to help

@esbreidenbach Жыл бұрын

Thanks! Well worth the watch and will make my installation alot easier. Can you tell me the distance needed from the ceiling to accomodate the Winn cannister filter?

@ovarb12 2 жыл бұрын

Love the video and your tshirt. Great to see a down to earth video using the stuff we have in the shop. Enjoy brother!

@petem6503 Жыл бұрын

Just an observation (having trod this path myself). Everyone starts with a shop vac. Then they enhance the shop vac, usually with a separator (the slanted thing). Then they get an improved outlet filter. Then they get a small, roll-around dust collector. Then they get an improved outlet filter for the DC. If you are currently using a shop vac (enhanced or not), but not satisfied, I suggest you jump straight to the DC, and then call American Fabric Filter (or equal) to get a "1-micron rated outlet bag". You rob yourself of all the hours of fun playing with the hoses, but you get where you're going that much faster. Shop vacs do a decent job of keeping the floor from getting too deep, but they don't really do the job of a DC. [A shop vac has a higher pressure-to-flow ratio than most DC designs; a dust system benefits from a high flow at moderate pressure. A good outlet bag design {eg, make it bigger} won't penalize the fan with excess pressure loss.]

@jamiehageman6191 2 жыл бұрын

Just stumbled upon this video. I have basically done the same setup. Only difference is I used a grizzly filter with the cleaning handle, fit perfectly on the hf dust separator. Have a 1 micron bag below it. Like the pail idea.

@24MoeA Жыл бұрын

I’m looking to do this with the grizzly filter as well. Does it need those gear latches for it?

@Mostviews111 Жыл бұрын

Sweet set up definitely doing this except I'm putting it in my attic with a single drop down through the ceiling

@eddiebob2408 Жыл бұрын

I am thinking of doing a 'Thien' type system when I noticed the air filter looked a lot like the air filter that goes in the Freightliner's and Kenworth's that I used to drive! I think they are about 1 micron, which is still 'trouble'... I could probably spray a can of Endust into the filter and make it 1/2 micron...hmmm... There are filters on Amaz... that are $60! For instance, Wix 46883. $61 in Nov '22. 14"x25"...what's not to love? Has a chrome cap on it you can cut out with a jig saw metal blade,,and stack 2 of 'em up! Hell's bell's,,,at that price...buy 3 and stack them up! 6' high of air filters. Actually I'm going to vent mine outside, low to the ground. But if I were in a basement, etc, I'd do my build with some Big Truck air filters. You think those engines don't have great filtering? Best thing to do if you have a dust collection system is wear a 3M P-100 mask while you are sanding, etc., vent outside, and hope the little particles don't impede your health if you think any/all of these filters will do 100% of the job. A nice build, and thanks for posting it.

@joedance14 6 ай бұрын

Really nice build! Looks great! And a terrific video! Which filter did you use?

@michaelmckenney7214 Жыл бұрын

Great video, and a great project. What kind of life expectancy do you get out of the air filter? In my home shop I usually empty my central machinery’s bag once every couple weeks

@jerrymcdonald6445 Жыл бұрын

Love this upgrade, I just don’t have the ceiling height for it.

@randyrice7214 3 ай бұрын

I saw this video a long time ago and still reference back to it. I wonder how this setup has held up over all this time. It looks great and I have that same dust collector

@PatriotDIY 3 ай бұрын

It's held up great! Use it every day!

@B.A.Bassangler Жыл бұрын

Daddy needs a new pair of Shoes! Thanks for the video; just what I needed to see...got an old Jet Dust Dog and a GIGANTIC 35 gal can with "cyclone lid"...(CBA: not worth the floor space).

@mikehudson8027 2 жыл бұрын

Great set up, can I ask where u got the screw on lid drum?

@DavidMorales-cr4vk 2 жыл бұрын

Great video! Where did you buy that barrel?

@Machias.Woodworking Жыл бұрын

You definitely have a subscriber! Currently building out my shop. Tied off walking around and over everything and not having space to work. My next step will be dusty connection so thank you for the amazing video! Quick question, no issues with suction with that kind of rise and drop?

@PatriotDIY Жыл бұрын

Nope! It works well

@SessionGodfather Жыл бұрын

Awesome vid. This is exactly what I need. What is the diameter of the canister (what diameter filter will fit)? Looks like you have the 35B222NANO - MERV 15 Nanofiber with removable end cap?

@user-ns8ic1cs4o 8 ай бұрын

Nice. Just finishing up my new shop and will be converting my HF collector to this system. How often does the filter need to be accessed (cleaned) and the 5 gal bucket emptied. I am thinking of putting the blower and filter in my shop attic to free up a bit of space.

@angymoshe Жыл бұрын

Has anyone heard of grounding the pipes when using pvc to deal with static? I read it in one of these old dust collection books.

@shaneseeley9641 8 ай бұрын

Great video!!! Can you pass on where you found the splitter to join the 2 4" lines to the 5" line feeding the cyclone please. Keep up the great work!!

@PatriotDIY 8 ай бұрын

It came with the Harbor frieght collector!

@waltersheehey Жыл бұрын

Thanks for this. I'm in the process of copying your specific design. One thing I didn't see in the video is what you used under the bracket you built for the Dust Deputy. I'm guessing it's a second 4" flange, but thought I'd ask. Great take on the HF mod!

@PatriotDIY Жыл бұрын

The bottom of the dust deputy is actually a 6" hole! I used a 5in flange and tapered the plywood from 6in opening on top to 5in on bottom. Then 5in hose.

@robhudsonnc 9 ай бұрын

@@PatriotDIY I couldn't tell in the video where you tapered from 6in to 5in on the dust deputy. I did see where you tapered into the Gamo Sealed bucket.

@Thepriest39 Жыл бұрын

One thing that you really should do is upgrade the impeller on the dust collector to a Rikon impeller. I did this on mine and what a huge difference. Well worth the time and $$.

@PatriotDIY Жыл бұрын

Mine works great as is! Thanks though

@dfy 5 ай бұрын

Hi great video, where do you buy the cylinder?

@winning_the_west Жыл бұрын

Great video! In the process of building a dust collector and pretty set on this setup. What is the total height required for this configuration. I have just under 9' and this looks really close to that?

@rawknee04 5 ай бұрын

Thanks so much for this video! I am looking for the next phase of dust collection in my small shop to step up from my Ridgid shop vac lol. One question - with the separator and filter upgrade, do you know is this setup is in line with the other dust extractors like 3M or Festool? I know those are HEPA rated but they still only do one tool at a time and a setup like this would be more practical for multiple tools.

@zunji0978 2 жыл бұрын

reat video! I think I'll be doing a similiar set up with my woodworking shiop. With this system, are you able to attach multiple hoses to different tools all at once?

@PatriotDIY 2 жыл бұрын

Yes! Check out how we set it up here: kzfaq.info/get/bejne/rspjd8mqscmXqps.html

@samadabdul1242 8 ай бұрын

Thank you! I'm going to build this. 1 question, what is the purpose of the donut? Was it to hold the bucket in place?

@fat-hand Жыл бұрын

Well done and very clean looking installation. Question: after using it a while, how much material ends up in the 5 gallon bucket?

@PatriotDIY Жыл бұрын

very little

@emadamin6472 5 ай бұрын

Great video- I just finished mine last weekend following your steps.. just wondering, where did you get the hose holder that you are showing mounted to the wall?

@PatriotDIY 5 ай бұрын

Should be a link in the description. The end of the hose is just rested on a 4in flange

@rexseven6907 2 жыл бұрын

Nice work. Thought about a clear window in your 5 gallon bucket? I'd think you'd want a quick, easy way to see that level.

@PatriotDIY 2 жыл бұрын

Considered it, but Not really necessary, the bucket fills FAR slower than the 50 gallon barrel! So if you just empty the bucket every time you empty the barrell, you'll never fill it up!

@oitotheworld23 2 жыл бұрын

Great design, thanks for sharing. But it looks like you created a shelf between the metal round section and the plastic 5-gallon collection bucket? Does dust get stuck in that cavity directly above the small bucket? I wonder if you could add a small column connecting the bucket up to the round metal hole.

@aussiemagik 2 жыл бұрын

Like a funnel? Then that gets rid of the horizontal shelf to let dust settle on?

@JeremyGiles-oq9uq 3 ай бұрын

Great video, can to tell me where you got the Y adapter coming off the dust deputy?

@PatriotDIY 3 ай бұрын

It came with the harbor frieght dust collector

@RockhollowCNCServices 5 ай бұрын

How do you clean the pleated filter? My setup is essentially the same just configure a bit different. Great video, thanks

@PatriotDIY 5 ай бұрын

I just blow it out with air compressor

@robert97dodge Жыл бұрын

Do you have the model of the filter you got? That link had a few different ones. Just picked up my harbor freight dust collector and this video gave me some great ideas. Thanks!

@PatriotDIY Жыл бұрын

It's the MERV15 one with the removable top I think

@brandoncarver4494 8 ай бұрын

Hey brother nice build, what did you put on the bottom of the plate that was holding the dust deputy? Did you run 2 5” flanges?

@davelechner2547 2 жыл бұрын

Hey Boss, Love the video and will be attempting this weekend once all the parts get here. My biggest question is, from the impellor to the filter case, is it an issue if it is slightly lower than the motor/impellor housing? Looks like it will be close (maybe 3 inches lower) and keeping the micron filter from being smashed up into the overhead storage rack is making me think about location.

@PatriotDIY 2 жыл бұрын

It's better if it lines up but I'm sure you're fine. Keep in mind, in the standard configuration they are nowhere near each other so just get it as close as you can and make it a gradual transition and you'll probably be fine

@davelechner2547 2 жыл бұрын

@@PatriotDIY where did you get your screw top barrel?

@keyboardr4him1 7 ай бұрын

Nice! I'm doing something similar with a Craftsman dust collector my brother gave me. The only question I have is you used 5" flanges on the bottom of your Dust Deputy and the top of your 55-gal bucket, but a 4" flex hose. That hose will stretch over that, or is the rest of your flex hose 5" as well? It all looks the same size.