Here's my two week review on the Wera kraftform turbo VDE. I'm a big fan of most of Wera's products but maybe my expectations were too high for this. www.unequaledheating.co.uk www.bensound.com
Пікірлер: 84
@SnabbKassa3 жыл бұрын
I don't know people are surprised that gearing up reduces output torque. In gearing mode, your output torque is quartered with this. You wouldn't try to drive up a steep hill in top gear, which might have a gearing ratio of 0.85. We gear down to increase leverage. Wera are very clever, but they cannae change the laws of physics.
@-abigail2 жыл бұрын
Where's my screwdriver with automatic transmission?
@BoiledOctopus2 жыл бұрын
Dude - you are so right! Great parallel!
@MrHQQX Жыл бұрын
funny enough I got this driver for that reason, well not only that reason but speed + reduced torque sounded awesome especially working with stuff like garden tools where everything screws into plastic and is easy to crack, sure it wont replace the proper torque set but if you don't need to work to some spec why spend the cash
@julienmv92723 ай бұрын
Yeah it was clear to me that this was to speed up the part where the screw is loose
@fialee8ca1324 жыл бұрын
Lead in music is way to loud.
@willekruse92713 жыл бұрын
This screw driver is for Electricians. So main purpose is not requiring a lot of force. So for electricians its perfect for an Carpenter is not good.
@jeffrey61543 жыл бұрын
if you use your brain and think, you realize that this screwdriver is not used to drive screws in wood or other hard materials
@oddrune3 жыл бұрын
Yeah, exactly. It's VDE - it's for use by electricians.
@YourMUMY3 жыл бұрын
I'm sorry. It's a screwdriver...
@joshwilson24023 жыл бұрын
@@YourMUMY yes, built for electrical use...
@prozapxxx3 жыл бұрын
@@YourMUMY and this tells me you've never held a tool in your life
@ThePwig8 ай бұрын
the multiplier is definitely for getting screws started but then turning it off for the final turns.
@doubledaddy20064 жыл бұрын
Quite a good vid to show off the product but I do think your disappointment stemmed from unrealistic expectations, as is so often the trend in modern life. A manual VDE driver is obviously never intended to whip in screws into hard materials like wood and take the place of a battery impact driver, so I do feel that part of the review was a bit misplaced. Really good to see it in use and think I might get one. Thanks for your time and effort producing the vid dude. Thumbs up emoji
@georgecroney61683 жыл бұрын
I often find I'm holding something with one hand and using the driver with the other, would be cool to have had a design that allowed one handed use. People that complain that it's got no power didn't have their thinking cap on when they bought it. Anyone with any engineering qualification should know you can convert torque to speed but you can't have your bread buttered both sides.
@chrisb5942 жыл бұрын
You can if you having a cheese toasty!
@poloniumfist60592 жыл бұрын
You could get one of those push screwdrivers
@georgecroney61682 жыл бұрын
@@poloniumfist6059 I have a really old Stanley one, but it's huge. They're pretty powerful for what they are though I wouldn't really use it
@Vindsvelle3 жыл бұрын
Concise summary, with a demo of the driver in action, in about five minutes; couldn't ask for much more from a review video on a tool I was curious about (besides not being deafened by the intro muzak 😉)
@planespeaking Жыл бұрын
The self adhesive velcro works well. It's still stuck to my festool tool box and I remove/replace the bit set constantly. We're is pretty good. It shouldn't "shit gears" if you don't abuse it.
@gplusgplus2286 Жыл бұрын
There are two types of screwdrivers the DIY and most pros need: The VDE ones which are *only for electrical work* and impact rated screwdrivers, the ones you hammer on the top. The two are mutually exclusive, don't use one where you should use the other.
@ArcheryRuleZ3 жыл бұрын
I love wera but I just use my fingers to spin the skinny screwdriver shaft on screws like the electric box example he showed. Thanks for the video, I had to check this thing out
@lukasdoppler6504 жыл бұрын
I own the normal krafform set for electrical applications and im very satisfied with it. Due to the small package it safes a lot of space and weight, which is important to me due to the fact i travel all around the world for my job. As you mentioned it is very hard to put screws into timber with it, which is surely right, but my question is who does this kind of job with normal screwdrivers or this gear system? Everyone uses power drill for this or maybe a rachet system if no powered tool is available, at least all ppl i know :) And another comment mentioned they make a non-insulated version, but this is more for mechanical work on a cars if im not totally mistaken.
@rjp6663 жыл бұрын
Great video just get rid of the over loud intro music.👍
@LabiaLicker2 жыл бұрын
When I experienced your "intro". I'm not surprised you had an issue with it...
@eliadbu3 жыл бұрын
This has gear ratio that increases the rotation speed of the head but as result the torque decreases. Any task that you would need to apply quite a bit of torque, this mode will not be useful as a result. so using it to for screwing into wood by design will not be good application.
@paullyons46244 жыл бұрын
Great review, I don’t think wera ever intended it to be for putting screws directly into wood but like you say more for accessory screws. I have a number of we’re kit so looked at the handle on its own which is around £63, I’ll probably end up buying it but think price is a little high and I wouldn’t normally say that about wera products.
@UnequaledHeating4 жыл бұрын
Thanks Paul, maybe wishful thinking on my behalf. I think it's one of those sets that you maybe shouldn't buy for the sake of it but it's really worth considering if you're in the market for some new drivers 👍
@oxfordsparky3 жыл бұрын
I’m a sparky, there’s no way I’m buying a £120 screwdriver to save me a couple seconds putting a faceplate screw in. It seems like one of those things that’s amazing in theory but pointless in reality.
@kylethornton71513 жыл бұрын
£90 on amazon
@Mishibar2 жыл бұрын
The turbo screwdriver by itself is about £40 120, which is likely around £90 isn't for "a screwdriver" is for 2 VDE rated screwdrivers and 14 VDE rated long interchangeable blades and a really nice pouch to store it all in. If you just use one or a few sizes of the blades you can get the screwdriver and just a few of the blades you'll use the most for a much lower price. Even less if you don't need the VDE rating.
@kylethornton71512 жыл бұрын
@@Mishibar shut. the. front. door
@Mishibar2 жыл бұрын
@@kylethornton7151 no.
@thewarr10r1 Жыл бұрын
"That bit of velcro can fuck off..." 🤣🤣🤣 Nice vid tho.. I'm a spark and think I'll get one.. Be great for terminating panel wiring.. 👍🏻👍🏻
@benrogers92553 жыл бұрын
I like your attitude :)
@bobbyfunface4469 Жыл бұрын
Yep 4 mins in im going to try one, cheers
@thomasnelson8222 жыл бұрын
That was absolutely hilarious I loved it
@domas44632 жыл бұрын
Hi great review... Just wondering which set would be better for hvac - wera 160/i7 or this one? Thanks in advance
@WMartinNI4 жыл бұрын
The handle could be massive and you still wouldn't get the torque you wanted. The 4-1 increase on speed would directly correspond to a 4-1 decrease on the power, so unless you had arms like Terminator era Arnie, you'll not be driving anything heavy in the high speed mode no matter how good a grip you can get.
@buggsdesign2 жыл бұрын
A tradesman who treats his tools or even boxes this way will surely be treating customers items with the same respect.
@TheRealBillyKent4 жыл бұрын
That bit of velcro can get fucked, grab the bottom part of the shaft and the gears could shit out the end made this review a masterpiece mate 🤣🤣
@UnequaledHeating4 жыл бұрын
I don't even try mate hahaha
@beirtipol3 жыл бұрын
"That bit of velcro can get fucked". That's the sign of a man not getting paid to do a review and I love it:). Did the gears hold up or have they shit out the end now?
@UnequaledHeating3 жыл бұрын
haha, Its still going strong mate
@georgigeorgiev3443 жыл бұрын
I've got the Kobalt Double Drive, which has much larger handle and more grip. Not recommended for electrical work as it's not insulated like the Wera. Still a great piece of kit though.
@stephenpena78134 жыл бұрын
Yea these are made pretty much ONLY for electrical work. Hence the insulation. They make similar ones for just regular bits and stuff but they'll disappoint you just the same sadly. tried like 3 but realy want this one for the electrical work I do. it'll replace like 15 of my full insulated screwdrivers lol
@WMartinNI4 жыл бұрын
They make a non insulated version too.
@johncorder29122 жыл бұрын
You should try a Klein rapid drive offset screwdriver.
@evfast3 жыл бұрын
I agree with the review. Bit disappointed that virtually any resistance renders the gear drive useless. However for the mundane tasks like cover plates or device attachment screws it's great. Oh and "press that button tomorrow and the gears will shit out the end" is pure gold. I'm waiting for the same....;)
@barryorbik2153 жыл бұрын
The idea is nothing new here, I had one similar in the nineties from mac tools, its intended for machine screws only, it wont replace your cordless drill or screw gun 😉
@user-wk7wv8rn8h4 жыл бұрын
Flat head = SL or slotted ; looks decent but most the time you're holding something and only have one hand on the screwdrover. Good idea but poor execution I'm still waiting for a ratchet insulated screwdriver
@oxfordsparky3 жыл бұрын
Took literally 2 seconds to google it. www.bahco.com/gb_en/insulated-ratcheting-screwdriver-with-slotted-and-phillips-interchangeable-blades-set---6-pcs-pb_808061_.html
@user-wk7wv8rn8h3 жыл бұрын
@@oxfordsparky I said a good one that things awful
@TheWakefieldOne Жыл бұрын
How big for 8 revs??
@KyTaundry4 жыл бұрын
Still going strong mate 2 month later? Can't fault Wera tools, they're in a league of your own, you pay a bit more but never have to replace them, would never go back to using cheapo shite.
@YourMUMY3 жыл бұрын
What's it like now chap ... Is it still good
@UnequaledHeating3 жыл бұрын
Still going strong buddy
@jimmymarroquin19922 жыл бұрын
are those magnetic tips?
@icfunited4 жыл бұрын
Great review, you have such a soothing voice. Ever thought about going in to ASMR videos? Hit me back truly yours your biggest fan, this is stan
@UnequaledHeating4 жыл бұрын
🤣🤣 no but stay tuned for my new series of "Bed time stories"
@Sarsgnu3 жыл бұрын
@@UnequaledHeating “sometimes you shit out all The gears, good night sleepy head!”
@danjason2167 Жыл бұрын
4x speed means 4x force required.
@keithsmith9833 Жыл бұрын
I would have to say, and I can say this as I’m an American living in the UK and I work in the trades, this review is typically British. Brilliant German engineering and you don’t understand it’s intended purpose, you have a moan.
@AlwaysFaxkenCashinHandMate3 жыл бұрын
Pronounced as Vera 👍
@AlwaysFaxkenCashinHandMate2 жыл бұрын
Oi I’m English, and the Guvna type of English an’ll so shut ya trap 🤨😂
@user-yw6qb9tt7t2 жыл бұрын
No one in england pronounces it other than with a double U. In enagland if you go around saying vera (as in Lynn) they will think you are talking about an 80 year old woman
@user-yw6qb9tt7t2 жыл бұрын
@William Tell do scots say pahree when they refer to Paris, France ? If not why make an exception. It is about being understood and Vera is a woman's name down south and a double u is a w.
@AlwaysFaxkenCashinHandMate2 жыл бұрын
You can’t just bunch every English bloke in the same category 🤣. Only the people who don’t give a $hit about their tools don’t know it’s pronounced vera. I’m 21 and do hella research before committing to any 1 company so don’t you dare have the audacity to put me in the same boat as these fucken waste men 😂
@user-yw6qb9tt7t2 жыл бұрын
@@AlwaysFaxkenCashinHandMate you say Pahree then. Au revoir mon ami
@phasedout67694 жыл бұрын
Velcro belongs on a 4 year olds shoe Sweet review 👍
@UnequaledHeating4 жыл бұрын
🤣 thanks pal
@NomadFM2 жыл бұрын
I bet a BOSCH is even handier
@americ689010 ай бұрын
I hate your starting intro music is so loud that video I hate that I will skip the video rather than watch.
@DavidJJJ3 жыл бұрын
1:34 not for kids people
@phteven91272 жыл бұрын
🤣 why would kids be watching a video about a £120 screwdriver? Get fucked mate 😂
@DavidJJJ2 жыл бұрын
@@phteven9127 hehe, nice language, 👍 that’s peak bogan right there 🤪
@kerzyjunior86274 жыл бұрын
Lol instructions are for the weak
@UnequaledHeating4 жыл бұрын
word
@childofthe60s1002 жыл бұрын
Great - until the unnecessary foul language. WHY???????????? Stopped watching.
@MKDELTA533 жыл бұрын
Damn using the same music as electrician u. Shame on you