What Brands Won't Tell You About Oscillating Multi-Tools

Рет қаралды 529,617

Күн бұрын

Ever since we released the 20 Oscillating Multi-Tool Tips for Beginners video, we have received several people letting us know that the blades can be sharpened. So we had to test this out.
Here are a few techniques that we tried and their results.
Whether you sharpen your blades or just buy new ones, the Oscillating Multi-Tool is an underutilized tool that more people need to know about.
20 Oscillating Multi-Tool Tips for Beginners
• 20 Oscillating Multi-T...
5 NEED to BUY Attachments for your Oscillating Multi-Tool
• 5 NEED to BUY Attachme...
Best Oscillating Multi-Tool Blade? (by Project Farm)
• Best Oscillating Multi...
If you would like to help support our channel, please use our affiliate page on Amazon (paid link), were we have listed a bunch of items we suggest.
Just follow this link:
Amazon Product Suggestions:
www.amazon.com/shop/influence...
(There is NO extra cost to you.)
Use of video content for personal projects is at your own risk.
Your results may vary depending on type of materials, your craftsmanship, and tools at hand. We are not responsible for any damages or injuries that might occur.
Some links in description are affiliate links that let you help support our channel at no extra cost to you.
Music from KZfaq library.
#multitool #woodworking #tipsandtricks #carpentry
2 Corinthians 5:17

Пікірлер: 203

@kevinklei3005 8 ай бұрын

As a retired toolmaker from down under to obtain smoother sharpening results clamp the blade closer to the sharpering area to prevent vibration and and give it more solid area !!!

@SexyEarHole Жыл бұрын

Sharing a tip I read somewhere that works well for preserving blades - Make cuts using a 'pulse' action, rather than just pushing the blade through the material as hard as you can. Backing the blade out a tiny bit for just a moment helps clear the cut of material that might otherwise get compacted around the blade and, it reduces the build up of heat that softens the blade metal and causing the teeth to go dull quickly. I've tried this and the difference in blade life is noticable.

@IRoYaILTY Жыл бұрын

Yeah exactly, I try and score it first then go deeper. I also use it at an angle instead of plunging it all the way through. Seems to help save blades

@hendrikvanleeuwen9110 3 ай бұрын

Can confirm. Just gone through a bunch of blades cutting into fiberglass. It also helps stop the blades from overheating.

@Keepingthefaith72 2 ай бұрын

Good idea to re-sharpen the blades, What struck me was how easy it was to file the teeth. Meaning the metal blade is soft and would explain how quickly these expensive blades go blunt ......

@alfredcalleja450 Жыл бұрын

Thanks from Australia - I've got heaps of dull blades - never thought of sharpening them before, Great advice!

@1pcfred 2 жыл бұрын

When you file a saw plate you have to put the saw as far into the vise as possible. The teeth need to just barely stick out. Otherwise the saw plate vibrates all over the place and the file just chatters trying to make the cut.

@csbaero 2 жыл бұрын

Same thought here, that blade should be steady. I would run the file on top first to even it up & then do each teeth

@rww805 Жыл бұрын

Using a vise badly and then holding the tip of the blade to stop it wobbling is possibly the funniest thing I've seen today. Oops, I just got to the angle grinder bit.

@davidaldis8242 Жыл бұрын

Same thing when actually cutting wood. Keep the cut near to a vice (or clamp) or the wood will tend to move a bit with the blade and make the cut less effective

@michaelmayo3127 Жыл бұрын

Maybe the guy should do a video no the correct uses of a vice!!

@AndyGenova-jr9ol 2 ай бұрын

Hard to take seriously when he can't sharpen in vice properely!!!!!!!

@jdshear01 2 жыл бұрын

These are great "save a trip to the store" methods if you are trying to squeeze in one last cut to get a job done. Time is money! One cool product that I've never used but came across is called the "SHARP POG Oscillatory Multi-Tool Blade Sharpener" which is a specialized grinding wheel that recreates the teeth. Interesting concept I guess...might be able to make your own using stacked and spaced cut-off discs but there is a product out there already.

@powerpc6037 Жыл бұрын

I used the small files to make big V-shaped teeth (like VVVVVVVV) and those cut pretty good. also, when using a multitool, don't put much pressure on it, just let the tool do it's work slowly. If you push hard, you'll just push the blade into the material and your tool will oscillate instead of the blade, which becomes stuck on the material and won't go left/right as it's supposed to, up to a point where your blade won't vibrate at all and won't cut anything. It's like using a hammer drill and pushing so hard you work against the hammer function of your drill, turning it into an ordinary drill and negate the benefits of having a hammer drill. Try drilling into concrete with the hammer function disabled, you won't get far.

@MichaelCampbell01 Жыл бұрын

Worth watching some videos on sharpening hand-saws. The same techniques are valuable here; eg: rip or crosscut, put the saw plate nearer the clamping pressure, how to joint the teeth first, etc.

@robertkerby2581 Жыл бұрын

Excellent Advice and tips! Your video inspires me to sharpen my own Multitool's, blades. Thank you, and very Well done!

@defuller1 2 жыл бұрын

Thanks for the video! I find that between the bulk pricing available and the quick change on my DeWalt it's much faster (time is money) to throw it away and put a new blade on

@cindyharrison4191 2 жыл бұрын

Just what I needed today thanks

@garymucher4082 2 жыл бұрын

More attention to using the typical "swiss file" sharpening technique works very well. But than more time means more money to some. I also would like to share a great idea for fixing metal cutting multi-tool or oscillating blades. Once the metal cutting blades stop working so well, there is a pretty good way to make them actually better than new. I take a hacksaw blade and cut them the length of the metal cutting multi-tool blades. Then using a welder, spot weld that hacksaw blade onto the end of the worn out metal cutting blade and you will be amazed how well that idea works cutting metal screws and nails in the material. Works absolutely amazing...and really cheap as well.

@SpecificLove7 2 жыл бұрын

That is a great idea, thank you very much for sharing it with everyone.

@aaudain1 2 жыл бұрын

Great idea 💡 👍 I always toss my blade, now I know I could reuse my blade thanks to you

@lorenmeyer5290 2 жыл бұрын

Always enjoy watching anything you put out!

@SpecificLove7 2 жыл бұрын

Thank you Loren, you are very kind

@DIYTinkerer 3 ай бұрын

The reason wiggling the tool speeds the cut is it enables the tool to clear the sawdust, same should work with pulsing the tool in and out. I bought an oscillating multi-tool for a specific job, but as a hobbyist woodworker I don't find myself reaching for it very often, however a handyman friend of mine uses his all the time.

@richs5422 2 жыл бұрын

Great video, I hadn't thought of resharpening these blades. They're fairly expensive and definitely get dull. Of course there are several parameters to tooth shape. Adding some fleam angle might help for this kind of blade in wood.

@1pcfred 2 жыл бұрын

I don't think multitool blades are sharpened to a crosscut pattern.

@TheRaker1000 Жыл бұрын

bonus tip 4 was worth hanging around for.

@GliptoneZadbane-Auto Ай бұрын

I like the idea - repair not replace

@kenn1936 2 жыл бұрын

AWESOME!!!! I love this idea, blades can cost so much!!!!!

@jameskennedy673 2 жыл бұрын

Thanks for the information, keep’m coming

@rickyparr8001 Жыл бұрын

Wow,super duper cool,caring is sharing,i love helping people because it is so rewarding to see people smile and when i make someone else happy i am happy,it gives me motivation to help others when someone shares ideas or helps me.Thank you

@453421abcdefg12345 6 ай бұрын

Great! The only problem is the "burrs" you ground off were the set of the teeth, without a set there is no clearance for the cut, so you must put a set back n the teeth.

@alohaIslandersLuau 2 жыл бұрын

Great Idea!!

@jonathansimmonds5784 Жыл бұрын

You need to watch a few videos about sharpening hand saws. Clamp it close to the teeth and get the angles as close to the original, I can here those file strokes chattering.

@jill-of-all-trades 2 ай бұрын

I was JUST thinking I would use my rotary tool to sharpen the blades. Working smarter not harder 👍🏻

@SevenDeMagnus Жыл бұрын

Cool kind of saw. God bless.

@guyh.4553 2 жыл бұрын

I've been wanting to try the file method but also liked the Dremel method as well. My thought with the Dremel is to go in at a bit more of an angle. Maybe even consider combining it with your triangle file. Just a thought

@TheLovelyMissBeans 2 жыл бұрын

This was my thought too. I think if you took it down initially with the Drenel, then fne tuned it with the file, you could probably get it pretty sharp again.

@readmore3634 Жыл бұрын

The multi-tool doesn't really cut...it scrapes.... to one side then the other. The user needs to pause fairly often, pull the blade back so it can shake the debris off and continue. Yes, it needs to be sharpened...but not like a traditional knife or saw blade....just squared (or pointed) edges. Rounded off isn't gunna scrape anything.

@JG24AJ 2 жыл бұрын

I don't have any oscillating cutters, but I do have several cutting wheels and a Dremel tool. So I know what I would use if I had an oscillating cutting tool. As always thank you for sharing and as Dave hacks would put it on another KZfaq channel "Pretty Cool Huh"! You folks have a great blessed one stay safe and healthy.

@SpecificLove7 2 жыл бұрын

Thank you Anthony. That phrase reminds me of an old television show.

@jeffthewhiff Жыл бұрын

This was a very interesting and informative video. I had a similar multi-tool and the blades do tend to become dull pretty fast and I am going to try to sharpen the teeth by using my Dremel tool.👍

@johnchristensen5871 3 ай бұрын

I be used these multi tools for years and often If you use light pressure and let the tool do the cutting the tool will cut faster and I can make the blade last for weeks depending on what I'm cutting and if the blade it getting hot your pushing to hard

@billyblackie9417 Жыл бұрын

There is a lady on KZfaq that gives tips on things for woodworking and she shows how to sharpen these blades. The teeth od the blade just above the vice prevents the blade from vibrating and easier to sharpen each tooth good man

@inspiringbuilds 2 жыл бұрын

Appreciate the sharpening testing methods with timing to back it up. Definitely would go this route if time isn’t money for you i.e. retired. For me I buy a pack of 50 for $30 as sharpening isn’t worth $.60. Keep up the good work! 👍🏼

@JT_70 2 жыл бұрын

Where do you buy blades in bulk?

@skiball83 2 жыл бұрын

@@JT_70 amazon. Got 50 for like $25 6 months ago. They are very cheaply made though. Hit 1 screw and you are done with it lol.

@inspiringbuilds 2 жыл бұрын

@@JT_70 Amazon, just look at the rating and reviews prior to purchasing.

@1pcfred 2 жыл бұрын

You really should be able to sharpen a saw blade to better than factory. Because mass produced saws are just punch cut. They're not actually sharpened at the factory. The teeth are just formed. So you can make the argument that by sharpening you are getting a superior tool.

@skiball83 2 жыл бұрын

Just remember 3 milwaukee blades are like $25

@thomasgronek6469 Жыл бұрын

Thanks for the video, you picked up a new subscriber. The first sharpening technique with the file: Are the teeth set (similar to a handsaw), do you think the teeth need to be set?

@peterpan7840 9 ай бұрын

Great vid mate. May I ask Can the same sharpening techniques be used on jigsaw blades?

@passtheparcel2007 10 ай бұрын

Yeh, before watching this vid, I figured it out myself, using a thin metal cutting disc on my hand held grinder with the blade held firmly in place in a vice. I successfully cut some new grooves with excellent results. They haven't gotta be perfect: Like in all things, with practice it get's better. Happy cutting...🙂

@BeaulieuTodd 2 жыл бұрын

I’m confused. They won’t tell us that we can reshaped to get it twice as dull? Huh. Guess they never assumed they’d need to.

@slaplapdog Жыл бұрын

I grind beveled edged and hooks into old blades and used them to cut hard plastic buckets and tire sidewalls.

@FIS681 Жыл бұрын

I just ordered my first oscillating tool. I also just found out how expensive blades and attachments are so I'm really glad I found your videos. Just wondering, have you tried sharpening blades using a Dremel with a diamond blade? You showed using a cut-off blade, but I've found they break too easily. Given the diamond blades are thinner and way less prone to breaking, I'm thinking they might work really well for sharpening. One thing is for sure, I'll definitely be sharpening my blades. I thought it was brilliant how you repurposed them into scrapers and carpet tools when the teeth were toast. Great tips.

@user-jm5gk5wc5q 5 ай бұрын

And this was a year ago / now its triple and the metals are soft

@commoncents6889 Жыл бұрын

Ive been buying my blades on Amazon 100 blades for $50.00. free shipping next day delivery. Dont think I will waste my time sharpening something that has a 50 cent value.

@DavidStrchld 8 ай бұрын

I used the bench grinder to cut teeth into it by using the corner of the stone. The advantage is it's much faster to do and also I don't have to remove the blade from the tool. Not sure about the cutting time, but I did restore it's cutting ability.

@BlessedLaymanNC Жыл бұрын

I noticed you just filed the teeth vertically. In a blade, the teeth are cut on a diagonal and angled out a little. Instead of filing them at 90 degrees, could you try it at about 60-70 deg? I think it would be difficult to bend them out back and forth with a file, but if you can I'd love to see your comparison there, too. Thanks

@proximitybeejay3673 2 ай бұрын

Legend, i think i get 1 use out of the Bunnings ones here in AUS lol. And a bout $15 a pop. Loving this Channel =)

@maui-maui4011 Жыл бұрын

When you create the new teeth, then you have to create that is called a path so you need to bend a little bit, each tooth in opposite direction to each others, you can also see that path in each new blade that has big or little teeth, so means put each tooth a little bit in opposite direction to the previous tooth.

@adammorris5078 Жыл бұрын

Definitely good methods to pinch some more $ out of blades, but there's a number of days were swapping to another 50 cent blade from Amazon is cheaper than my time spent sharpening. Not a bad way to recover damaged blades if you find yourself really needing to save them or ran out on the job site, good tips n tricks and that's 👍

@gregarrell6132 2 жыл бұрын

I have been using a small triangular saw file for this. Works well. I will try a Dremel as well. I have had good results with a badly worn blade by grinding bit back to flat and re-cutting teeth.

@gjolinares23 2 жыл бұрын

I agree

@1pcfred 2 жыл бұрын

You are supposed to joint a blade before you sharpen it. Jointing means running a flat file across the tips of the teeth. That trues them all up and leaves flats that you then remove to get an even tooth pitch.

@gregarrell6132 2 жыл бұрын

@@1pcfred yes for conventional hand saws. The teeth on a multi tool blade are so small that topping or flat filing is not practical. You would have a tough time seeing the top of each tooth, let alone file them with the correct gullet shape and angle. My method works well for me on the multi tool but everyone can make their own choice.

@1pcfred 2 жыл бұрын

@@gregarrell6132 yeah sharpening saws is a bit of a trick. I wear a magnifying visor when I do it. I use a strong light. I have a saw vise. I use double extra slim taper second cut files. There's no fleem on multitool blades. They're rip sharpened. So your "special angle" is 90° and horizontal too. High pitch saw plates are always rip cut. Once you go below 13 TPI fleem isn't going to do anything for you. So keep it simple.

@gregarrell6132 2 жыл бұрын

Good point Paul. I also get a bit more life out of my recipro saw blades. They really over priced here in Australia. They also have teeth that are large enough to see and file. The down side is the hardened alloy is too hard to get much result with triangular saw files. Quality saw files are both scarce and expensive. I may consider a small diamond or silicon oxide v shaped grinding wheel. Any thought on that!

@donalddossmann6603 3 ай бұрын

the POG works just fine

@GypsyHunter232UK 4 ай бұрын

You forgot thr stacked 1mm thick metal slicing discs used on grinders seoerated by washers..about 10 1mm thick discs should suffice..yours sincerely from the old qeer corrupt UK 🇬🇧

@TheEulerID 6 ай бұрын

It might be worth trying a miniature diamond file. It's probably no good for something where the teeth have been complete worn away, but the metal on those blades is hardened, and if the aim to to get a part-worn blade function better, then they are more like to hone the metal better than those relatively coarse metal toothed files. The diamond files also have a better defined profile for that very reason.

@roncouch 2 жыл бұрын

Useful. as a means of a practical workaround and for extending life of blades which tend to be relatively expensive. I would advise caution where a rotating grinding method is used: too much heat will draw the temper of the blade, which as a result, would not cut well for very long after resharpening. I would also - using wood off-cuts - clamp the blade as close to the teeth as possible to minimise flexing when sharpening, especially when using a three cornered file. Query: most ‘sawtooth’ cutting tools have “set” which is effective for removing cuttings and helps to keep blade cool and prevent or minimise risks of creating burns in the wood. Not easy to tell if oscillating blades have a set as with a typical handsaw…….

@markrogers1502 2 жыл бұрын

You're correct on both points. The "set" of the teeth must at least provide a kerf as wide as the thickness of the blade, otherwise binding and smoking will happen. You can set the teeth opposing each other or all to one side skipping every other one. The latter would work similar to a Japanese saw that doesn't leave a scar on one side.

@lym3204 6 ай бұрын

In my opinion, the best way to sharpen these multi-tool blades is to use a diamond rhombic saw file. I bought this file from TEMU specifically for my fine-tooth Japanese saws ($4 to $6). I also bought a whole bunch of multi-tool blades in bulk really cheap from TEMU too so it would be like sharpening disposable razers--not necessary just throw them away.

@lincolndickerson1293 2 жыл бұрын

Time vs money. If you have new blades on hand perfect, but even us Eagle Scouts occassionally fall short on being prepared. This video does prepare me however to recover mid-project and continue if I dont want to make the trip to the store right away.

@mydraftable6526 2 жыл бұрын

You need to file the blade at an angle angle. Not talking about filing to a point but each tooth like a knife. It will be better than new.

@kelstra1997 6 ай бұрын

Multi tools can be a wonder tool - something that you might not use all that often but when you have a need for them, nothing else will do. The real archilies-heel with them is the cost of the blades which is quite ridiculous. The cheaper ones on-line are next to useless. I really believe the right answer is to buy the best quality blades you can find and then look after them. Sharpening has its place but as you can see it's really a 'better than nothing' option.

@LowDoughShow Жыл бұрын

I bought a pack of 1/32 inch cut off wheels and took a bolt and put a bunch of the cut off wheels on with washer in between each wheel put it in my drill press and made all the teeth at once.

@peterdebrino8290 2 жыл бұрын

I have the best luck using the small Diamond tipped files, takes a few min to sharpen it, but it works. Thanks for another great video.

@inspiringbuilds 2 жыл бұрын

Agreed 👍🏼

@SpecificLove7 2 жыл бұрын

Thank you for the tip Peter

@awlthatwoodcrafts8911 2 жыл бұрын

Yeah, with the proper file, it would would be worth the few minutes to sharpen a blade at least a couple of times, just to get the most out of one blade. The other methods modify the tooth count/pattern so much that you don't have the same blade anymore.

@danielbackley9301 2 жыл бұрын

@@awlthatwoodcrafts8911 Best way would be to sharpen is the way you sharpen hand saws level the teeth then use a triangular file to fix the points and depth of the gullets.

@cbpuzzle 2 жыл бұрын

The perpendicular file and wheel cuts push burrs out the flat edges. You need to hone those burrs off with a flat stone. A sharp edge is 2 polished edges coming together, not edges with machining burrs.

@randyb3347 6 ай бұрын

Dremel tool with a cutoff dish might work good too.

@2dawgsmiked684 Жыл бұрын

Check out Leah's technique on See Jane Drill.

@robertmeigs5176 Жыл бұрын

Since the blade oscillates in the tool itself, why do you move it back and forth while you're cutting?

@jimmypickett9912 Жыл бұрын

I tried to cut the bottom off of a long cedar fence but because I couldn’t keep the tool level, the backside looked terrible.

@kentaroo.7759 19 күн бұрын

If the blade gets too dull, I'd just blunt the edge and use it as a scapper blade.

@MyMy-tv7fd 2 жыл бұрын

I like it

@inspiringbuilds 2 жыл бұрын

Agreed. If you have time it’s good for a cost savings reusing what you already have. 👍🏼

@donotrobme9295 2 жыл бұрын

Thx for trying all these. Now I know to just throw them away and buy big packs. Honestly helps me realize not to do this. Thx

@kendalgee5808 Жыл бұрын

🤣🤣

@rtoguidver3651 2 жыл бұрын

I sharpened my blade to a chisel point to cut ceiling tiles, worked great.. Since the blade cuts side to side, they should be sharpened at an angle, not straight up & down.

@acaflooring Жыл бұрын

i do hardwood flooring, I cant imagine a hand sharpened blade doing well in some white oak

@CMAenergy 6 ай бұрын

A small piece of advice Those blades you sharpen Probably have an off set to those teeth Along with a different pitch That is one tooth will be sharpened like the off set on a hand saw and the other tooth similarly and then you will have the tooth displaced to the side a small amount. Check it out to see if you can do that, You might be surprised by the difference in cutting

@topbullseye Жыл бұрын

if you combined one and two it would be even better

@Martin37vg 3 ай бұрын

Best way is to just buy new blade sas they do not cost very much at all. 4th way ok as a scraper. Only thing is most grinding wheel say not to use side. Face use only.

@davidsteinfeld9123 Жыл бұрын

I got questions?? I saw the video on your channel Obviously Now I like the Dremel brand blades they are designed for multi material Copper aluminum wood Now they get dulledlike any other blades will I will like to know if you have any input on the sharpening of these types of blades ther a bit more rugged compared to the blad s I saw you sharpen Any input please Thank you in advance

@Ripperx121 Жыл бұрын

Because I am a freak. I have saved all my old blades. Gonna try this.

@carlbeaver7112 Жыл бұрын

Dremel needs to be tilted @ 11 or 1 to create knife edges and held at opposing angles to create a vee between teeth. The big issue with vibrating saws is poor ejection and weak teeth.

@John01GM40 2 жыл бұрын

apart from the hand filing, I do not understand how these methods are "sharpening" when using the grind wheels, as you are not putting any sort of bevel on the teeth to create an actual sharpened edge. All you seem to be doing is making square faced gaps at the front of the blade.

@raven_glass Ай бұрын

You should mention that this only works with bi-metal blades intended for cutting wood. Carbide tipped blades for cutting metal can't be sharpened like this.

@SavageVoyageur Жыл бұрын

Regular hack saw works too for getting a sharp blade.

@gabrielcabrera4379 Жыл бұрын

How is acrylic made?

@lurklingX Жыл бұрын

only thing i was wondering, was if method #1 or #2 was faster or less annoying to do.

@TomsBackyardWorkshop Жыл бұрын

I was today old when I learned that you can sharpen these.

@jonathansims525 2 жыл бұрын

Saw seejanedrill's video on this years ago. This was a good take on this though.

@kevh3113 6 ай бұрын

If you're on £20 ph is sharpening a £1 blade worth it ?

@Biffo1262 3 ай бұрын

There are much finer and smaller triangular files then shown method one which work far better.

@drwhoeric Жыл бұрын

This is one of those times I would rather stock up on blades from Harbor Freight. For the infrequent times I use my Oscillating tool, I buy the better quality blades.

@onefixitman 2 жыл бұрын

I pay 45$-50$ for 50 blades. Sharpening is not worth my time but I do have a pile of old blades that I use as scrapers.

@seymourwrasse3321 2 жыл бұрын

any one that had parents that grew up during the Depression , sharpened these without thinking any thing of it

@johnbeckwith1361 Жыл бұрын

5:36 I do this to sawsall blades to cut through plaster walls, cement board, hardi backer board etc. I'm sure that blade would work well on those same materials.

@edmondvodochodsky8208 2 жыл бұрын

If you angle the small cut-off (dremel) wheel, so that the teeth were at an angle - / - (instead of straight up-n-down)- I - it would remove the cut-wood more efficiently, and thus cut faster,.....

@gemaloy 10 ай бұрын

They sell a tool for sharpening the blades. It goes into a drill.

@bcreason Жыл бұрын

These blades don’t seem to be heat treated like a hack saw blade. A hack saw can cut a piece of angle iron and still be sharp. These blades a few cuts in wood and they get dull. I’ve few that the teeth are gone all together just from cutting wood.

@timlist4173 Жыл бұрын

which Oscillating Multi-Tool is the best? I see you are using a rigid battery Oscillating Multi-Tool.

@SpecificLove7 Жыл бұрын

I've never tested which tool brand is better. I have the Ridgid brand because I like the lifetime warranty.

@gkinghsmith9352 2 жыл бұрын

Only if needed, otherwise the blades are cheap compared to the work I get done with the O saw.

@christianhufton6445 2 жыл бұрын

I recommend get blades form Amazon you can get 50 for 30 bucks and the a decent quality

@SpecificLove7 2 жыл бұрын

That can work great too if you can wait a couple days, but if you're in a pinch, these techniques can help.

@waddell849 2 жыл бұрын

time is money think il just buy them

@gregr1672 3 ай бұрын

I use the Oscillating tool A Lot! I Hate the Price of The Blades! They have to be the biggest price gouge since Shaving Razors. That said,I ve tried the cheap Harbor Freight Blades.As expected they are junk .Actually much worse than I Anticipated! So ,I buy the (Name Brand Ones) and some of them not so great either! I have been pleasantly surprised by the De Walt blades for extra long line life hardened ones!They're not cheap but are about the same as other brand names or even less! I just cut laminate counter tops in half and hardwood cabinet faces in two ,also inch thick shelving ,hemlock I think . Got it all done with one blade .I then cut thru hardened old subfloor .Best blades so far.

@andyl7721 Жыл бұрын

In summary, save yourself seven minutes twenty and buy new blades

@Kyle-bo5jt 2 жыл бұрын

Wish he had tried a diamond blade on a tile saw.

@michaelgoransson1592 2 жыл бұрын

Have you never looking at a saw ,every second theeth are bent up and down..

@RedDogForge 2 жыл бұрын

filing teeth is an art, searxh here on youtube for crosscut sharpening. use those methods to sharpen this blade and im sure youll get amazing results

@contessa.adella Жыл бұрын

That is surprising! The extremely aggressive tooth pattern from the angle grinder looked like it would just eat that wood….yet it was inefficient….go figure!

@dingotopruc9642 2 ай бұрын

Don't make the blade thinner, keep it full thickness and shape new grooves with a Dremel or a jewelers file.

@generalleoff 2 ай бұрын

I honestly do not see much viability in sharpening a dead blade back to wood cutting ability. I do crude sharpen dead blades and use them to cut drywall though.