TL:DW - Does it qualify for a Voron Serial Number? If no, then not a Voron, simple as that Which Voron should you build? If thats the only question with no other info, build a TRIDENT

What is VORON? My opinion, Voron is community, Voron is design, Voron is unique DIY printer build by yourself - only you, Voron is great experience of building and knowledges getting which is priceless!

COTS is the key and what appeals most to me about Vorons.

I totally get what you're saying and you're also right. You don't get a Voron when you're buying a SV08 for example. Sure thing. But. "Ultimaker at home"... where did that come from again? Voron Design didn't claim to have the support or software like an Ultimaker back then. But they provided a similar machine with of the shelf parts. In this case as a non profit organisation, which is absolutely awesome. But am I the only one who sees the similarity with Voron and SV08/Troodon? They don't claim you get the same benefits as with the original, but you'll get a similar machine. Electronics in the base, easy to put panels on, same firmware etc.. I think a Troodon or SV08 is obviously more a Voron as an Bambu or Ender V3. I love my Voron printers. And building a Voron was the best idea I had with 3D printing as a hobby. But as long manufactures respect Voron licencing it could be a win for the community. Can't wait to see what people do with SV08. And maybe Voron users can benefit from new mods and extensions like Klipper-AMS every chinese company is coming up with. Anyways, keep up the great work and have fun at reprep festival!

Great Video! I usually dont comment but this genuenly helped out so much!

I'd like more info in video format for what the pros and cons of the main Voron family. Answers to things like "Why is a Trident easier to build?" Really just a video or series of videos hightlighting the best use cases for each type of Voron would be great.

You forgot to mention kits and sales who claim to be directly endorsed or supporting Voron

I would call them Voron inspired.

I just purchased a K1C based on your streams. Now that I can print ABS I have been trying to decided what to make but I think I have settled on an Enderwire since my old modded Pro has given me a few issues. Any suggested resources or videos to help me along?

Picked up my Troodon 2.0 Pro recently and am loving it. Its not a "Voron" and people who claim it is are ignorant, but I loved that it only took around 3 hours to setup and saved me a lot of time crimping, running wires and with the general assembly process. Leagues above any other "pre-assembled" machines from other companies, voron inspired or not, thanks to the excellent base design. Will you get something better ordering the BOM yourself and assembling it yourself? Most likely, something about that attachment of fully assembling it as well. It's close enough for me to be compatible with the things I need, personally I kind of prefer the metal components over the printed ones anyways but I understand this goes again the voron design philosophy, yet I still think they have a place. Currently they claim its "Voron" inspired not a "Voron" and do credit the design team heavily on the page. Would be nice if they contributed a bit back to the project even if it was just something like 2$ May look into building the 0.2 at some point just to have a more portable printer for ABS.

I just finished my first voron build and it was converting a FLsun cube to a voron legacy with the build volume of 310x310x415. i had to using one set of mods to allow for the use of short linear bearings be used from the FLsun but side that every thing else if legacy. A few thing i found with doing the voron legacy is finding the right hardware locally or screw kit online with descent shipping cost. also that there no manual for the printer it self but the tool head lucky dose so, u need to work from the cad file when doing the printer frame and core xy which is no big deal just have to stop and think on which is right step to go sometime. only big thing i could say about the hole printer build is that when putting the X Y carriage they call for a M5x30 button head for the rear most idler and if you screw it all the ya down it blocks the linear rod from passing through and socket head the same. i end up using a M5x45 just a pin to hold the idler in place and it seem to be working so far. the voron legacy seem to be a good option for someone that doesn't want to print abs but still want to try out the coreXY printers. Plus for the cost to do a voron legacy isnt bad at all compared to the other in the voron family to get ur feet wet only kicker is the self sourcing but if you can get lucky and find a donor printer that similar part to a legacy you can get in to a voron for very cheap thankfully.

Thank you for the info. Great as always. I would love to see a video on taking a SV08 and making it into a Voron.

Coming from a Ender 3 Pro (first printer) a build a 2.4 300 and I love it it was a fun build and you build it as the way you like... I sold my ender 3 after building my V2.4 and now after couple of month I am looking for a second printer, I was looking at the switchwire but after see this video I think I am going to be looking for the V0.2

I'm a total noob and want to do my own voron build after I get some experience under my belt with my qidi. This is great info...Thanks for this sir!

I was looking to buy a Bambu A1 mini a few days ago watched some reviews and now I'm here

The V0 advice is very good. I have found the same experience with my v0. Lots of fun to build, and an excellent secondary printer. I would not want it to be my only printer.

I will be at RMRRF, see you there!

The cost of the LDO kit is the same as a x1c which would you recommend?

Nice overview. When you start out it can be daunting to get all the info from the streams and discord. Any chance of a mods video showing popular mods like toolheads, extruders, CAN etc.. ?

What in my opinion is the defining feature of a Voron, or of the other DIY printers, is that you build it by yourself, so you have that intimacy with the machine that allows you to understand more easily what's going on when something is not right. Even if someone builds you a Voron it's not the same thing, even worse if you buy one in a box and the parts are all custom and you don't even have the benefit of the community knowing that machine.

I really love the Trident and a lot of that is Steve Builds' fault, but I think my final decision comes down to multi material printing. I know that both the Trident and 2.4 can do it but I'm wondering if I should just go tap/stealthchanger on the 2.4. I feel like a Tridex will take up too much space and I really want a 300 mm^3 print volume. What do you suggest?

What shelf are you using for your printers? I'm still looking for a good sturdy shelf for my two 2.4s

Can attest that Formbot kits are pretty good. Started with their stock 300 mm Trident. Now, my machine has a couple more mods, so not stock anymore. But it was a good starting point at an attractive price.

I built a Voron Trident 300 kit from LDO. It's my goto printer now, 100% reliable and perfect print quality. Only mod I did was installing the Nighthawk wiring for the toolhead (highly recommend). I also have a Bambu X1C (I printed the Voron parts on this) and a Prusa MK3S+. Thinking about selling the Bambu and Prusa. I only need a hardened steel nozzle for the Trident to print Nylon-CF.

What is the mod for the switchwire that removes the fastback?

Would love to see an updated ERCF video

This video was very well timed. I am about to want to build a DIY printer, and was going to do a Voron 0.2 kit. Reason being I currently have a Bambu P1S and an Ender 3 S1, so this Voron was going to be dipping my toes before something like a Ratrig or a 2.4/Trident. So, as a secondary printer to replace my Ender, should I still look at something other than the 0.2?

How hard is it to get IDEX working on a Trident? I really want to try mixing flexible filament in for seals and joints. Purging towers seem... not great.

I'm currently sourcing a lot of parts that base an upgrade from different Voron iterations and mods; It's a Solidoodle 3. Making it CoreXY with Legacy X-carriage, XoL toolhead Trident Belted Z mod on the bed and finally trident skirts. 😁

Literally had just finished the video and an ad for the SV08 started playing.

Preach Nero

In theory, you can eliminate the keyback on the switchwire in software. If you keep the X and Z steppers powered up, the gantry isn't going to fall. The catch, would be to auto home the Z axis as part of a power down function in software. In the event of a power failure, there might be enough friction generated by motor back emf to gently lower the gantry without damage to the print head if it didn't "fall" from the very top of the Z axis. The switch back does add some drag to the Z axis on the way down, and reduces drag on the way up, which might have some effects on printing as the motors might need a bit more power in one direction vs the other. One would only see this during Z hopping though. I'm almost finished with my Enderwire build. Still need to fine tune things after a last minute hot end swap (gave up on the Taichi after it kept clogging, and now have an E3D Revo Voron. Only one extruder now, but I might build an ERCF in the future). Also need to assemble the enclosure and build a Nevermore.

Question, serious one: I have large frame build for HEvo, long time ago, collecting dust and inducing remorse. 3030 profiles, 510x510x700mm And pile of other components. Any ideas how to remanufacture it into V2 with minimal cost? I saved a bit and would like to try....

IMO voron represents the ability to find replacement parts anywhere along with understanding of the machine which means you can fix/mod it at will. This is the exact reason why I choose voron over bambu. It is not like you can't pay others to build a voron for you but that defeats the benefit of a voron in my opinion

Voron is a place of love for anyonyone in capacity to built it

Is there any other Denver then the one in Colorado?

Tastefully done.

I'm on a quest to see what info on the Phoenix came out of RMRRF and came across this video. I'm a little worried, from what I saw from last year that the Phoenix won't meet your definition of a Voron. To me, self sourcing and research is part of the fun so I'm hoping there is still a chance I will be able to with a Phoenix.

I love my 0.1 with tweaks, thinking maybe a ratrig v core 4 next if there's no updated trident in the next few months to replace my first printer which is a few year old big bedslinger with klipper and mods.

I am building a V0 everything went fine until I tried using a beefy Hotend and a different print head… now I will make the mini stealth burner…

the one for me that i still don't quite get is the siboor EU only, fully assembled , fully printed, V2.4. they're not doing the "if you cant build one you can buy one" but they are selling a fully assembled V2.4, does that count, how would people doing serials know that's not a hand built (by the user) Voron?

Is there a timeline for the release of the Phoenix? Or an idea of when you are going to do a video about it? I really want to build one.

See you at fest sir, excited to say hello.

Legacy might be a good target for converting an Ender 5 into. Self sourcing makes sense IF you have a lot of dead printers in the junque box. In my case, I started with a basket case Ender 3 Pro off Ebay ('un-repaired' printer.) There are a LOT of these for sale at around $70.

I say the Troodon 2 Pro is Voron like because it uses the StealthBurner that can be upgraded or replaced. The the Sovol SV08 is not. It is a coreXY printer with a flying gantry. At least that is my view point. But I could never confuse a Bambu Labs printer as a Voron because the parts are proprietary and is very closed system.

Honestly are there any benfit in Core xz, today can't see any

The hello hello hello at the start drove me insane because I knew I heard it somewhere And now I remembered, it's Walter Lewin signature videos opening (personal videos, the physics teacher)

my LDO Voron is basically stock, i just replaced all axial fans with Noctua ones to be more quiet, and i replaced the omron probe with klicky ASAP. now, about a week after its finished i started preparing magnetic hinge doors to take off and quick release bottom panel clips. might make quick release klips for more panels, not sure yet.

Bro the ad at the start of this video was for an sv08 !lol

Also want to know why the rat rig is better for over 350mm2 size? Does the rat rig have beefier extrusions? The builder on voron will give you a material list if you do custom size. Does the larger format become too flimsy? And how does that go against the likes of elegoo OS giga? That has super thin extrusions for the size. Curious as I’d like to do a printer that is 450x300 but on livestream and here it recommended to go to rat rig….

I've build a V2.4 at 350x350 and later a V0.2 as the "back-up". I'll take the V0 over the V2 every time, unless the parts don't fit.

You should add a video highlighting community favorite mods.

if the Voron is on the floor is it technically considered a Flooron?

though, since we aready need a printer to build a voron, why not to strt with a V0

So much drama as of late. And now we will get to see the echo chamber effect online. Lol

Printers for Ants ARE Vorons. They can be assembled using (most) of the official Voron manuals. If Voron's auto BOM compiler on their web site allowed for changing the bed size of a V0 , V2, or Trident to the PFA range, or swap between 1515 and 2020 extrusions, the result would be the same. Have any builders made non-square bed sizes for Tridents or V2's? Something like 250x300 for example (Makerbot foot print)? I like the idea of ready to rock and roll off the shelf Vonor-ish printers. At least so long as they are Open Source, and the mechanics allow for user swaps of hot ends, including mounting Voron design tool heads (stealth burner) and other mods. Don't call them Vorons, but do mention where some of your 'DNA' came from!

Me sitting with a formbot V0 kit as the first Voron: “oh dear”

All of them. Build all of them.

I've been wanting to build a Voron for some time now, but I'm still not entirely sure which one I want to build. I got my first 3D printer early last year, a Bambu Lab P1S (I know it goes against everything that Voron stands for but I wanted a good out of the box experience) I figured that since I already have a Core X Y printer being my P1S, I would be a good idea to build a 2.4, or even a 0. Would either of these be the right call? Printing is just a hobby for me, I do not make any money off of it I do it purely for the enjoyment of making random stuff.

See you at Rocky Mountain Taylor.

Built 2 formbot kits, anything wrong with them, formbot sent replacements asap, and even gave me a kit upgrade when they upgraded their v0 kits 1 week after i bought mine

to me voron is one of the few alternatives where you are nearly in complete control over your printer. voron is quality no chinese printer offers. (yes bambu lab is a thing, but out of the box your privacy isn't valued, yes prusa is a thing despite not beign chinese, but the price tags are horrendous compared to voron)

Can you do a detailed TMC driver tuning video for Klipper? There are all these settings that I dont understand what they do, so a detailed tuning guide would be helpful. Here are the settings I am talking about: #driver_MULTISTEP_FILT: True #driver_IHOLDDELAY: 8 #driver_TPOWERDOWN: 20 #driver_TBL: 2 #driver_TOFF: 3 #driver_HEND: 0 #driver_HSTRT: 5 #driver_PWM_AUTOGRAD: True #driver_PWM_AUTOSCALE: True #driver_PWM_LIM: 12 #driver_PWM_REG: 8 #driver_PWM_FREQ: 1 #driver_PWM_GRAD: 14 #driver_PWM_OFS: 36

What diference "custom injection molded parts" make? Like, they cannot be substituted for by printed/machined ones with time/when needed?

That is one of the best aspects of a Voron is the off the shelf parts. And the ability pick and choose exactly what you want. I built a 2.4r2 and love it, I kinda wish I would have built a Trident. That is next on the list. Lets face it, All these commercial printers straight up copied the Voron designs. Just goes to show how good the engineering is on the Voron Designs.

I dreamed of a Voron, but the kits were far too overpriced for me... But now I've ordered a Sovol SO08... it's not a Voron, but it drives a bit like one :-)

Ill be honest, I am not fond of this video, because I feel like a LOT of your points, are contradicted by the upcoming voron pheonix. Now I understand it is a new breed of voron, but by your definision, it's not a voron, right ? also, regarding the links to kits, there are plenty of links to kits in the bom, from "trusted" suppliers otherwise, I really appreciate the fact that you made a video guide about the different voron and how to choose, it will definitely help a lot of people. I remember when I was looking for my first voron, I had a hard time finding review and comparison videos

Hello. I build to time a Voron 2.4. Specil: With WP-DAKSH Toolchanger (5 Hotends). I have the Manta M8P with C2 and the BTT-MOT Expansion Board = 11 Places for TMC. The Voron must in many Destail optimized - but i have good ideas. - See you later. Greating - Ingo from France (german man)

Voron seems more about the journey and less about th schematics

sometimes, when he holds the mic the right way, his shirt says ass. 15:29

How ironic that the printers that are the most made out of COTS are actually among the least COTS printer by themselves.

Can you do a detailed video on TMC drivers for Klipper? There are some settings I dont understand, and can't really find any explanation of what they do. These are some available options for TMC2209, but I dont understand exactly what they do: #driver_MULTISTEP_FILT: True #driver_IHOLDDELAY: 8 #driver_TPOWERDOWN: 20 #driver_TBL: 2 #driver_TOFF: 3 #driver_HEND: 0 #driver_HSTRT: 5 #driver_PWM_AUTOGRAD: True #driver_PWM_AUTOSCALE: True #driver_PWM_LIM: 12 #driver_PWM_REG: 8 #driver_PWM_FREQ: 1 #driver_PWM_GRAD: 14 #driver_PWM_OFS: 36

SV08 = Voron now apparently. lol

18:05 no!!! we need more Phoenix talk !! 😅

tronxy x5sa to voron legacy works fore me

the Voron 2.4 Bed is custom machines plate..

Actually I'm having problems trying to get a voron, but im in Latin America. Buying an LDO is like over 2k because or Shipping and custums, sooo... Yeah, i jave to self source some things

If only the D cut shafts were as COTS as the other components. I got everything else but For some damn reason they are hard to find in Pakistan, can only get them machined if you pay a fortune. I am using M5 screws in place of them xd.

then when yu discuss about voron variation, you open path to wariation like troodn and sSV08

Voron needs an SLS.

Take a shot each time Nero says not a voron.

So a Voron Phoenix isn’t a Voron? 😅

Voron-ish? Voron-oid? 😀

Voron "inspired" printers are still not Vorons.

no they are not voron, bu is it it tha t micuch essnetaial ?

It’s just many other names that became genericized. Like skilsaw or airfryer or googling buts that’s more of a verb. There hundreds of examples “on Wikipedia under “List of former trademarks that have been genericized”. In a way it is cool but as people are acknowledging how good voron are but at same time it’s detracting from the approach/ ethos etc. and risk is that the voron will be overridden by the “wannabes”…

1:38 for the childish germans

Racecar! I would describe my Voron, and a lot of other DIY printers as such. These are build up machines. Fast, questionable reliability (if you get a bad kit like me) until you driven it so much everything that could break already did and got upgraded into an amazing machine. These other printers "Claiming" to be Vorons are just the sport level trims you drive ready of the lot. Its not the same as project car.

how dare you?! voice by greta thunberg is now in your head & was provided to you free of charge by yours truly! now back to topic, i’m willing to sacrifice my future printers not being genuine voron’s because my first 2.4 was built before pre assembled kits existed & the fact that i had to wait a few days just because i didn’t have a specific m3x8 nut or one bearing will end up happening to ya. if you haven’t built one yet its not wise anymore to self source specially if you want to keep your sanity. however, there’s still a little sense of proudness & accomplishment once you fire it up and the gantry takes its first “step”

...so it's not like Glocks... where you have Glocks and you have Glock brand Glocks?... or Enders and Ender brand Enders?

Having talked with the managers at Sovol. They do not intend to call the SV08 a Voron. Only credit the project for inspiration. And continue to support the project as it goes ahead.

Ok. Custom components. Yet for some people that is not so important, for some people it is even better to have injected parts and custom made metal parts, electronic boards. Because those are less expensive and more durable and better integrated. We may say that it is nice to have some parts that are standard, like electronics and maybe extruders while some other parts like frame and joints would be nice to be custom made. YMMV Nice video as usual, thanks.

sure, it's not the wy you mean it, but notheless ;-

About to have my wife cut a big ass "VORON" decal for my deltas...LOL

A Voron is a printer that identifies as a Voron.

I smelled genericide

Also: -An elitist community. -For those that want a 3D printer as the hobby, not a tool that just works, to support other hobbies. -A fashion show -For people that don;t value their time.

Let me lead by noting that I don't really have a dog in the "is an SV08 or a Trodon a Voron" race, and I figure your definition here seems pretty reasonable. But this video has still managed to irritate me. On reflection, it's because of your continual use of the phrase " *can't* build a Voron." I'm working on a full-size R5-D4 as I listen to these videos, and I'm a librarian so I'm good at reading and interpreting directions. I'm pretty sure I *can* build a Voron; probably not as fast as some folks, but I'd get there in the end. But I also know I really, really, don't *want* to build a Voron. The entire idea sounds just tiresome and frustrating to me. The "Old Guard" in the 3D printing community is almost all folks who did build a printer, or at least mostly built a printer if they had something like an Ender that they got working. Those of us who aren't interested in building a printer and fall into the "It just works" half of the hobby haven't been here as long, because until a couple years ago, there weren't really any machines that were close enough to a "just push go" printer to support us. But now there are. The result is a huge surge in interest from folks who are into 3d printing but not 3d printers, and in a lot of places on the internet that has led to significant pushback from the people who did build a printer. There's this attitude that one shouldn't have a 3d printer if one didn't build it oneself. Your choice of phrases strongly suggests that the only reason one doesn't build a Voron is because one is incapable of doing so. I hope you can see how those two things align, to make it feel like you're suggesting I'm not good enough to be here because I'm not interested in building a Voron. I'm 100% certain that's not what you intended - but what we *intend* to say and what we *actually* say are often not the same thing. Anyway, I'm not trying to make a big deal out of this. I've seen many of your other videos where you're extremely open to people like myself who are happy with our Bambu Labs machines and don't feel like building a printer. I guess that's why I'm bringing this up - you're generally someone who's welcoming to most and aware of the subsets of the 3d printing hobby, and knowing that you came across differently in this video is, I hope, useful feedback. In any case, I do agree - an esential part of what makes something a Voron is the building experience. If you want the performance and aren't into building, go buy an X1C or Ulitmaker or what have you, but be open about what it is you've got and what it is not, and leave the Voron "title" for the folks who are really into building printers themselves.

Dont think you know what ethos means😂

A Voron is an overhyped printer not really worth your time, not in 2024