No video
What Is NITROUS Like In a Miata??
Рет қаралды 28,724
Күн бұрынAll I can say is... I absolutely cannot wait to get this car fully dyno tuned. This thing is sick now!
Looking for a reputable, professional remote tuner?
Speed By Y, LLC - speedbyyllc.com/ (Mention Car Passion for a discount on remote tunes)
----------
How to Use Virtual Dyno:
• How to Use The BEST St...
----------
Support TheCarPassionChannel on Patreon!
/ thecarpassionchannel
Want to make a one-time donation? You can buy me a gallon of E85!
www.buymeacoff...
Interested in having a 1 on 1 video call? Details below:
thecarpassionc...
What’s that digital gauge in the dash?! It’s called a CanChecked and you can pick one up from my friends at Bofi Racing!
bofiracing.co.... (Car Passion affiliate link)
Get yourself a Dragy! (Affiliate Link)
dragymotorspor...
Check out my Amazon Store!
www.amazon.com...
Use coupon code CARPASSION50 to save $50 on your first High Performance Academy course!
hpcdmy.co/cp10
---------
0:00 Intro
1:35 Plug Swap & Tune Adjustments
4:40 Cracking Open a Cold One With The Boys
6:00 Initial Pulls & Reactions
9:42 Solving A Problem
10:45 Virtual Dyno Analysis & Adding More Power
12:47 2nd - 4th Gear Pull Comparisons
15:03 Closing Thoughts
@jimmyjones5787 Жыл бұрын
Probably best to direct the purge away from the windscreen. Hot glass+cold purge = cracked windscreen.
@B0F Жыл бұрын
honestly does glass even get that hot? it's not like he's got a hood dump
@tristanparkk Жыл бұрын
The natural airflow over the windscreen probably keeps it fairly cool I'd guess, but that's purely speculative
@TheCarPassionChannel Жыл бұрын
Too late, I already cracked it 🤣🤣🤣
@MikevanEsch Жыл бұрын
@@TheCarPassionChannel noooooooo 😭😂
@fransvanzelst1398 Жыл бұрын
@@TheCarPassionChannel 🤣🤣
@DrOllie-ve2dv Жыл бұрын
Please make a 1 hour compilation of pulls. This shit is music.
@TheCarPassionChannel Жыл бұрын
Hahaha that sounds way better than "Smash Mouth - All Star [10 Hours]"
@autoSRI Жыл бұрын
If you want to reduce the lean hit you can try running a really short fuel line from the solenoid to nozzle and run a long line from the nitrous solenoid to the nozzle also for a softer hit on the trans with a bigger shot don’t purge before use
@guiguitonicmotorsport Жыл бұрын
With progressif nitrous controller. I spray 100shot. I love nitrous on miata.
@asentientkyle-3932 Жыл бұрын
Hold on other youtube video, Greg just posted
@t32prod.98 Жыл бұрын
FOR REAL
@Glissskate Жыл бұрын
Who’s Greg, this is Crags channel
@hydro5580 Жыл бұрын
The car is so insane and it sounds so good when the nitro comes on omg
@Pippy1 Жыл бұрын
With such a small shot it gives me vtec vibes
@v3ctors69 Жыл бұрын
I'm not even driving and I'm over here grinning like I just added some sauce to my car. Great time.
@curlyoakley Жыл бұрын
This is awesome, looking forward to seeing the dyne results!! Keep it up man
@Eulsam_FZ Жыл бұрын
Go for the 75! Thats what I have in my NB. It eats it up and wants more, but I need a bigger fuel pump to get more fuel in at the same time
@kriterzz5383 Жыл бұрын
do you know if super cold canadian weather causes any safety risks with a bottle?
@matos_x_ Жыл бұрын
Niceee! Don’t blow the welds on the intake
@n2obob Жыл бұрын
That is impossible, there is no pressure in there
@hjsckd Жыл бұрын
Amazing! You could use the multimap option with the nos switch and have the full ignition advance on N/A and a reduced one for NOS.
@CashedOutCars Жыл бұрын
So great to watch, the nitrous makes it look like VTec, maybe a 50 shot is the equivalent of a K24Z3 hahah!
@Goodtimesbadluckv2 Жыл бұрын
I run a 50 and it’s probably close.
@JohnScott-yh1qq 6 ай бұрын
Sometimes a worn ignition key assembly will do that too. I had one word when I push the clutch in it made the starter startup
@galosengen856 Жыл бұрын
Well guys, Greg here, I blew the nos motor and now we return to your normal +500whp programming with billet main caps that will survive another 20 pulls before going to da MOON
@daleabono3616 Жыл бұрын
This was the most fun video yet. You are my Sam Malone of the miata world; keep up the great work!
@danielnguyen8754 Жыл бұрын
Great content as always! If I remember correctly, nitrous undergoes phase change to liquid very roughly around 700 psi at room temperature, so the pressure reading on the tank may not be a good indicator of how much nitrous you actually have left.
@kevinmcinnis7180 Жыл бұрын
Dude stoked to see you so happy !!
@paulkimble4548 Жыл бұрын
Am I the only one that spent the whole video waiting for the danger to manifold clip to be slipped in?
@stantheman5163 Жыл бұрын
Nice job. It rips as good as it looks.
@ryanconforti3529 Жыл бұрын
Well. I’m sold. Time to get creative on fitting this with ITBs
@josephkelly4893 Жыл бұрын
Big difference, that top end is beautiful, well done dude
@beefycheesecake Жыл бұрын
Awesome, can't wait to see the bigger injectors
@johnmurraycompton569 Жыл бұрын
Good call not getting greedy YET with th 50 shot. I blew the motor in my FC with a 75. It was also a dry kit a d I was dumb back then 😆.
@Its-Just-Jack Жыл бұрын
When looking at the speedometer when it comes on looks like honda vtec, love it.
@shirtz69r Жыл бұрын
Love the energy Greg. What paint is that on the valve cover? Love it against the black bay. Looking forward to next monday
@FDB77 Жыл бұрын
Greg, what have you done?! Now I can't decide whether to go turbo or nitrous on my NB! 😭
@ivanbetancourt2247 Жыл бұрын
X2
@tisdrumo9899 Жыл бұрын
Do both and Just push the engine 'till It blows up
@Nebbia_affaraccimiei Жыл бұрын
@@tisdrumo9899 big turbo and use nitrous to spool it up.
@miatafan Жыл бұрын
Turbo for sure... Filling bottles gets old and expensive. Turbo is power 100% of the time
@Girz0r Жыл бұрын
So happy for this build, you don't see many NOS miat setups. Everyone just thinks compound turbo is the way :)
@lowndslow4476 Жыл бұрын
Weight the bottle that’s the only way to tell how much you have, not by psi. But give better idea I spray a little more on a 2.5lb bottle and get 4 1/4 passes.
@coreygrace4856 Жыл бұрын
I used to run a 75 shot nitrous on my 90 na at miatas at the gap. That was fun.
@ConvectionConnoisseur Жыл бұрын
Interesting that you're seeing significant gains 500 rpm before the nitrous activation of 4700 rpm. Great vid!
@mx5adventures893 Жыл бұрын
So sick!! Can't wait to see this on the dyno. got me thinking if i could add this to my ITB setup! keep up the wicked work greg.
@hawker800mech Жыл бұрын
Me too! I told a couple people it would help me a little during the traffic light dances. They scoffed and I pushed it off to the side. It’s back on the table. It’s got to be even better with the ITB singing. It can be set up with my Megasquirt as a dry system.
@justbryce7023 Жыл бұрын
Are you going to try to remedy the lean spike with the fuel table? Car sounds sick. It's like a turbo but it comes with a weekly subscription fee
@ArthurSperotto Жыл бұрын
Your Miata now has VTEC! O.O
@gavinmartin9145 Жыл бұрын
Work can wait! Miata dad in with a nitrous Miata!!
@patroberton489 Жыл бұрын
Jack Cecil from Hp Logic. He is in Florida. He does remote tuning look him up his reviews speak for them selves.
@MrJasons9 Жыл бұрын
Omg I love it Grege, keep up the great work.
@TheMapleDaily Жыл бұрын
I cannot wait to see you hit that 50 or 75.. do 1 run in a race and start to loose then flip the switch "Too Soon Junior" BOOM!
@Francisco.Ferreira Жыл бұрын
You are incredible! Can't wait for the next video to come out
@brysonshires9742 Жыл бұрын
Soo its time to up the turbo size and go for a small shot of nitrous on the 500hp build
@Brock_Landers Жыл бұрын
If you can get a set of aftermarket tuner cams, a set of dual valve springs with aftermarket retainers, and you can rev that thing out it'll REALLY shine!
@ZareefHuq Жыл бұрын
I get the springs, but I was curious as to why you'd also aftermarket retainers? Would you need to machine them down to fit each valve?
@silversixxx Жыл бұрын
Titanium retainers :) rev even smoother and not much extra cost
@mr.adventure559 Жыл бұрын
Definitely looking forward to the next video.
@kylef.9361 Жыл бұрын
Always amazing content! Thanks Greg!
@CARSONBOARD Жыл бұрын
That was a cool video man!
@xsailor1970 Жыл бұрын
Awesome! Can’t wait to see the dyno video.
@ryandoyle4344 Жыл бұрын
Timing reduction 2 degree/ 50hp; also could adjust activation to =or>3000
@danielegel7143 Жыл бұрын
Huzzah! Congrats on pulling it off man!
@Seeeeyaaaa Жыл бұрын
Haha..its addictive. I popped my motor with a 75shot (lifted the head) ran great for a fair while though and the engine was not fully built. Actually it was probably a little bit bigger than a 75 as the jet added about 90HP. anyhoo..next engine almost back together and built this time 😁
@Jiggy-wit-it Жыл бұрын
Hey Greg love the videos off topic to the video but I have a 94 miata that I've been building for a while now. A little issue it has is the fuel pump doesnt prime at all in the on position like it should but when I crank the motor it does prime it and it instantly dies because of no fuel pressure. But then it will run after it builds it up. I checked the relay for it and checked to make sure the ignition switch was working properly and also checked voltage and everything is fine so I'm out of ideas anything helps lol.
@AlfredvanKuik Жыл бұрын
This looked pretty unimpressive on video up until the side-by-side comparison. I still don't like the idea of having to refill your horsepower, but I bet it's a lot of fun.
@sjorsangevare Жыл бұрын
I'd be afraid of using it since every pull is like $3
@R03333 Жыл бұрын
I guess you can't look at Nos the same way you look at going turbo/supercharged. It's more of a fun thing to use now and then rather than a total change to your car?
@mcrrocker277 Жыл бұрын
hell yeah
@lowndslow4476 Жыл бұрын
Also another thing burst disk for your bottle is more then likely 3k psi next time have the bottle refilled as them if they can change it to 2k or less since even then that’s still high.
@BuddhaOfDarkness Жыл бұрын
Sweet results
@histandard31 Жыл бұрын
Awesome video, keep them coming!
@crawford323 Жыл бұрын
Greg, where would I find your expertise on the proper way to adjust the idle on a stock NA? I have a very erratic idle, warm or cold. I do the ten pin to ground bit. Set the RPM at 850 or so. Adjust the timing via a timing light at 12° with thE Crank angle sensor and still it will not settle down. I have checked for bad temperature sender at the ECU plus checked to see if the Throttle body Sensor switch is functioning properly and the factory paint on the adjustment appears un tampered with. I thought it was crazy when someone suggested a water temp sensor would affect the idle but the big boss ECU must know all the engine parameters or it can get confused too. As far as I know the “No Touch” throttle body stop screw is still at factory settings. I did not do the feeler gauge check during the functionality check of the throttle body switch circuitry. This might be a vacuum leak but who knows where. Help me Dad! 1990 NA stocker.
@guidosaur7506 Жыл бұрын
Yesssss Miata Monday with Gregg
@austinsnider2957 Жыл бұрын
He'll yeah Greg keep her up!
@joro8604 Жыл бұрын
Always an honor to be able to watch greg’s crazy handiwork.
@jamesrobertson3853 Жыл бұрын
Love a good pull ha ha ha When is the na turbo getting nitrous??????
@jeffhaft7378 Жыл бұрын
Just got your stickers in the mail yesterday, I didn't know the turbo had angry eyes ROFLMAO
@TheCarPassionChannel Жыл бұрын
Just like the original 🤣
@gz617 Жыл бұрын
That laugh at 5:36 is everything lmao 😅
@mariosnikolaou5212 Жыл бұрын
Thank you man!
@acornhead50 Жыл бұрын
Oh yes I've been waiting for Miata Monday to hit
@strawberryhill4307 Жыл бұрын
VTEC just kicked in yo!
@analoglyfe Жыл бұрын
Love watching this, my curiosity is being fed
@raventfly Жыл бұрын
When did you put the Sparco into the NB? Love the videos, thanks for all the info!
@TheGeordietheWitchandtheWench Жыл бұрын
Big smiles all round :-) Go the NOS!!!!!!
@haufperformance Жыл бұрын
Now I want to try this.
@lindkvistandreas Жыл бұрын
This looks awesome!.. thank you for sharing! .. When you do the comparison with off/on at 13:xx .. it looks like you have a repeated hesitation somewhere between 6000-64000rpm and sometimes also at about 6800rpm.. do you have any jumps/quick changes there in your VE/IGN/VVT-maps?..
@Jimmy_Mac Жыл бұрын
Like a 2stroke power band… whopiiiii!🎉
@castaway__7235 Жыл бұрын
how do you always catch that transmission in the intro, isn't that thing Heavy AF??
@PANTYEATR1 Жыл бұрын
Greg, can we get some intake air temperature recordings with that new intake and whatever you were running before? I'm triggered by the current intake. If it were mine, i would find a way to pull air from the inner fender or down towards the ground. Just watch for heavy rain and puddles. Nitros is like a turbo... That runs out😆
@mastercricket7626 Жыл бұрын
this is super rad bro and great to see ... now for the future of 2SJ ..... cant weight brotha ... peace n love craig keep it rad stay safe and build on ... ps this kinda maken me think of this along with water/meth injection on my build 🤔 🤔 lol..... l8z bro love the content
@new_spin Жыл бұрын
Lemme know when you wanna line em up again 😁 I'll flash back to stock on the FiST hahaha Then we can see how it does against Cobb Stage 1 too 👀
@supercarmio Жыл бұрын
that was sick 👍👍
@38tech Жыл бұрын
God that is so sick. I can't even imagine how the gap sauce would work on the back roads with some twit on my tail.....I've already kept with some cars, on the Twisties, I have no right to, but man with a shot. Fuck dude!!!!! 😂
@LemonMan_Man Жыл бұрын
C: I am glad you understand nitrous miata/
@jeffhaft7378 Жыл бұрын
Hell yeah! Can't wait for the next video........keep the rods in the motor lol
@dumbestoyster Жыл бұрын
YYEEAAASSS!!!! THE POWER!!!!
@aaronm2452 Жыл бұрын
About gotdamn time Greg!!✌
@typedrew Жыл бұрын
You shouldn’t be losing any power with that timing map, it should only be running that map when the nitrous is running if that software has a setting to activate Meth then it would only run the Meth map with it working
@Bbeavis Жыл бұрын
Fascinating.
@chrisg998 Жыл бұрын
So amazing. I’m watching this thinking.. should I just sell my ND and use the money to build a nitrous nb/c
@_Sawagashii Жыл бұрын
Hi Greg, any news about the red one?? Did you find out what the noise was??
@JS_Jordan Жыл бұрын
Miata dad is baaack!
@brianf7758 Жыл бұрын
What is the data center display at top & center of your cluster? Is it a digital add-on?
@LordLoMR2 Жыл бұрын
Ok time to put the 100 shot in. Lol
@one234569and10 Жыл бұрын
Kicks in like VTECH
@MitchChubey Жыл бұрын
Changing ignition timing won't change your AFR.
@alleyman82 Жыл бұрын
Have you thought about or looked into getting a Mazda V6 for an engine swap into the Miata? There are a few turbo editions. you would need a adapter plate and the other things to make it run. Maybe run a little go juice. It is wider but I think it would still fit in the hole.
@alleyman82 Жыл бұрын
Do or have you sent messages. Got a request supposedly from you. Ideas?
@sd.dogstreet Жыл бұрын
Soooooo sick!!!!
@ZareefHuq Жыл бұрын
Nice video! Btw why is the remote tuner in your description struck through?
@TheCarPassionChannel Жыл бұрын
Oh weird, very good question. Random formatting issue, I'll get it fixed!
@jeebz86 Жыл бұрын
v-tec just kicked in yo
@tsukasa101 Жыл бұрын
Why the choice of spark plug bkr7e more than zfr6f ?
@lukedayberry666 Жыл бұрын
Please get some reactions from people when you purge. Would make a really funny video
@daleabono3616 Жыл бұрын
"so, lets go do a pull..." video immediately goes to a bowel movement commercial...
@jonkucer5989 Жыл бұрын
Have it come on at 3700 rpm and that thing would rip like vtak
@timnb0340 Жыл бұрын
this is so sick!!!
@n2obob Жыл бұрын
Set your throttle switch to full throttle, no reason to have it any other way. You can also have it on at any rpm, no reason to limit to above any rpm.
@TheCarPassionChannel Жыл бұрын
It's not limited above any RPM - it's set to kick on at 4700, it turns off when throttle is lifted. I have it set to 93% now, I don't want to set it too high in case of slight TPS signal variances that sometimes show blips of ~98% even at WOT
@n2obob Жыл бұрын
@@TheCarPassionChannel no need to only have it work above 4700, kick it in at 3000 or 2500, that is where you will feel the max power. Just do not do 2500 in top gear., try it first, second, third etc. then you will get the real feel of nitrous.
@TheCarPassionChannel Жыл бұрын
@@n2obob It's in an effort to save the stock rods, once a bigger shot is in the system there's no way I'll be activating it at 2500RPM.
@jmpcrx Жыл бұрын
You know you want to try a 100 shot.. Assuming the stock engine is good for 240bhp, or does nitrous come in so quick the shock would bend the rods or break the gearbox? If so, any way of bringing in the nos progressively?
@Parker_white_guy Жыл бұрын
Yes, they have progressive nitrous controllers.
@gedas3419 Жыл бұрын
@@Parker_white_guy good ecu's have nitrous controls, even a megasquirt2 has nitrous and me221 and 442 doesnot... nitrous can be progresive in percentage of opening just like petrol injector
TheCarPassionChannel
Рет қаралды 23 М.
QAZSPORT TV / ҚАЗСПОРТ TV
Рет қаралды 719 М.
Jason Derulo
Рет қаралды 34 МЛН
TheCarPassionChannel
Рет қаралды 38 М.