What's HUB? | 1.375x24 Suppressor mounting platform

Рет қаралды 12,856

2 жыл бұрын

Today we talk all about "HUB"/ 1.375x24 suppressors and their associated pros and cons.
If you have further questions, would like advice, to chat, or to reach out about anything for that matter feel free to shoot me an email.
justinatkmo@gmail.com

Пікірлер: 26

@jjacks8203 2 жыл бұрын

Quality info. I learned an early lesson by buying a Crux suppressor which went out of business about 4-6 mos after I got the stamp…. Fortunately I have 2 mount for it but big whoop… I’ve gone with GA Recce 5 & 7 since.. waiting on 2 YHM k cans to use with GA Plan A.

@mattcm32 4 ай бұрын

Great explanation! Thank you for helping me get caught up with the times!

@OshoRamseyGump 2 жыл бұрын

Nice review. It's perfect.

@PracticallySquared1 2 жыл бұрын

Thanks!

@rrd9434 4 ай бұрын

I'm just getting into suppressors. I was told the LAHAR-30L runs a 1.38x24 Hub Mounting System. The Wilson Combat Suppressor Ready Muzzle Break only shows External Thread description as 24mm x 1.5 pitch. Is Wilson Combat being proprietary so all I can use is their suppressor? This would kinda suck cause I'm getting discouraged with their 300 HAM'R Hunter.

@trendy_d2103 2 жыл бұрын

Thanks doing this video. I am fairly new to the suppressor game. I am looking to buy a 30 cal. can, and was seriously thinking of getting a rugged with the special silencer shop is running this month. With your comment about their qd system has me second guessing myself. Thoughts on a Nomad-L or any other can you may think would be better?

@PracticallySquared1 2 жыл бұрын

Shoot me a email and I'll give you my phone number. I'll have a couple questions but should be able to help point you in the right direction. Email is justinatkmo@gmail.com

@SOCMMOB 3 ай бұрын

Holy shit you must live pretty close to me. Im 30 minutes from Washington Co MG club

@glock92fs 5 ай бұрын

AAC sells an adapter called the S.T.A.M.P. That adapts 51T-1.375X24.

@shortdrawwhitetail1222 2 жыл бұрын

I'm buying my first can too and I have asr and kemo breaks. I was going with rugged but they keep there stuff secret now I don't know what to go with.

@jasongaudreau2075 Жыл бұрын

Otter Creek polonium and polonium K!!

@oxencott3n175 2 жыл бұрын

Waited for months for the Dead Air dirext thread mount for nomad ti. Still out of stock. But thankfully it's compatible with the HUB and ordered the griffin direct thread mount. Only concern is to see if the can stays tight on the 18 inch 5.56.

@PracticallySquared1 2 жыл бұрын

Try a few wraps (2-3) of Teflon tape on your barrel then snug ut on there hard. I bet it will stay no problem. I've been doing this for years. It's an old tip OG's used to do when DT was the only option

@oxencott3n175 2 жыл бұрын

@@PracticallySquared1 thank you bro for that. I am going to do that. And the next logical progression is switching everything to Xeno. I think it's my best option. The direct thread was really for my 18 inch "precision" AR but if they come out with a titanium xeno flash hider it'll be a no Brainer

@lootsmcgoots436 11 ай бұрын

Just so I can understand, do I have to form 4 the can separately from the qd mount? Thanks

@PracticallySquared1 11 ай бұрын

Your can needs a form 4, but you could buy a million different mounts without that.

@lootsmcgoots436 11 ай бұрын

@@PracticallySquared1 appreciate that

@RomiAlmeda Жыл бұрын

Do you use any grease on the HUB threads? I cleaned my nomad’s threads with acetone and have a bunch of aeroshell 33. I am switching from direct thread to the xeno adapter and don’t know if leaving it dry is a bad thing

@PracticallySquared1 Жыл бұрын

That's personal preference. I'm a pipefitter by trade and leaving threads bare goes against all I've been taught. I personally put a dab of some high temp anti seize on mine.

@RomiAlmeda Жыл бұрын

@@PracticallySquared1 Do you do the same on muzzle devices that you don't rocksett? I had a hard time keeping the direct thread adapter from backing off during fast strings of fire which motivated me to try xeno

@PracticallySquared1 Жыл бұрын

@@RomiAlmeda I use the antisieze on everything. I've never used rockset for a muzzle device, I always torque it down to spec. As far as the DT adapter coming loose, it's almost always because it wasn't tightened enough. With spanners it's hard to gauge how much torque your putting in there but I go "ham" when I torque one into a can. I've never had one I properly snugged come loose.

@RomiAlmeda Жыл бұрын

@@PracticallySquared1 Right on, thanks for your tips!

@PracticallySquared1 Жыл бұрын

@@RomiAlmeda no problem! You'll love xeno. I had a few videos on it but youtube deemed them against their standards. I've been running xeno since it came out. It's my favorite for sure. Way less likelihood of something coming loose and the muzzle devices are cool

@save2a4all Жыл бұрын

7:40 Future proof with HUB mount... 💯 I want to buy a Rugged, CGS, Huxwrx, or Surefire but do not want to commit to their proprietary QD mounts for a semi-auto gun. Direct thread preferred on bolt action. So they just cut out customers going proprietary IMHO.

@RealHankShill Жыл бұрын

Rugged Alaskan 360s both use HUB