What's Inside an F1 Helmet?

Рет қаралды 438,315

Күн бұрын

Thanks to the following channels, go check them out!
IMMI / imminet1
Mercedes-AMG Petronas Formula One Team / mercedesamgf1
David Mc Gloin / rallymadleitrim
FORMULA 1 / formula1
Snell Memorial Foundation, Inc. / snellmemorialfoundatio...
➤ Subscribe for more incredible motorsport: goo.gl/AbD2f9
F1 Helmets have to be unbelievably strong to protect the driver's head at over 200mph and resist high speed impacts. So today we are going to cut one open and see how they are constructed to be so strong, impact resistant and still extremely light.
I take my F1-grade helmet that I've been using for the last 8 years and cut it open. We examine the carbon fibre lay-up as well as how it's constructed to pass the various rigorous safety standards. Such as a projectile being shot at it at over 250kph and being heated to over 700ºC!
📺 F1 Driver’s Technique Explained
➤ Senna’s bizarre technique: bit.ly/3lORK59
➤ How Schumacher’s style won 7 championships: bit.ly/3527cVz
➤ Alonso’s strange steering: bit.ly/2Z7a93v
➤ How Verstappen will be F1 champion: bit.ly/3jK6L6n
➤ How Verstappen is so fast in the wet: bit.ly/32WMVhr
📺 F1 Engineering
➤ How F1 brakes work: bit.ly/3h0Whh0
➤ How an F1 clutch works: bit.ly/3i0oDJM
➤ What’s inside an F1 gearbox: bit.ly/2DzMqRW
➤ How F1 teams change four tyres in two seconds: bit.ly/2QVpkIl
🏎️ Track & Racing Driver!
➤ Get a free report on your track driving: bit.ly/2LmYNBA
➤ Get faster on track with our FREE 25-part tutorial series:bit.ly/2PypIMK
➤ Our real-world training programmes: bit.ly/2ktjtgV
🏁 Sim Racers!
➤ My sim wheel: bit.ly/354BBlY
➤ My sim pedals: bit.ly/3eJckQo
➤ Our sim racing course: bit.ly/34WuV7p
➤ Get a free report on your track driving: bit.ly/2LmYNBA
➤ Driver61 Sim Racing Channel: bit.ly/2BMdk4B
#Formula1 #Driver61 #FuelForFans
➤Timecodes
00:00 What makes up a F1 Helmet?
01:12 HANS Device
01:39 What's Different About a 2020 F1 Helmet?
02:35 'Bring Me The White Visor!' Wait Hang On...
02:57 Safety Testing
03:59 Added Lightness
04:26 Prepping for the Cut
05:21 Big Kev is Back!
06:05 The Cut!
08:13 A Closer Look
08:43 It's All In The Layup
10:33 Thanks to Fuel for Fans!
11:31 Ready for the Display Cases!

Пікірлер: 649

@Driver61 3 жыл бұрын

What do you guys think was the coolest fact about these helmets?

@redeyeofthenightfall 3 жыл бұрын

right in the the first 3 minutes heated and photochromic visors! also the projectile test is really cool i know that Oakley, maybe 15 yrs ago, has used the same testing as marketing material. some of their lenses can similarly protect against debris for extreme sports

@reallytinychannel6455 3 жыл бұрын

Surely the light adapting features built in the helmet, that's so cool!

@MilitantPacifista 3 жыл бұрын

isn't carbon fiber dust really bad in your lungs?

@avroarchitect1793 3 жыл бұрын

@@MilitantPacifista its highly carcinogenic, and can cut them up pretty bad internally too.

@sandybarnes887 3 жыл бұрын

How thin the carbon fibre/ Kevlar layers are. How light it seems

@danort17 3 жыл бұрын

Just one thing: I worked with carbon quite a while now: Never cut carbon without a mask or safety glasses, and never do that inside. The carbon dust that results from cutting it is highly carcinogenic! I'm working in a Formula Student Team and literally the first thing we got taught is to never cut/drill/saw hardened carbon inside and without a mask. The fine dust will also stay everywhere for ages, as it's much much finer than "normal" dust. Just make sure you REALLY clean that table and your shirt now to not affect others and yourself working there in the future!

@capsilver85 3 жыл бұрын

I was wondering that

@ARTHURCBR 3 жыл бұрын

Good point, i was thinking that myself.

@RafaHuel 3 жыл бұрын

rip driver61

@TherealLorinser 3 жыл бұрын

I see too, that what if he inhaled it.

@RevMeTurk 3 жыл бұрын

It's a good idea to wear a mask when cutting anything with a power tool. Anything you cut will produce fine particles and the power tool will spit them into the air.

@sbinnala14 3 жыл бұрын

Short answer: The drivers head

@Ripstikerpro 3 жыл бұрын

Or a Benetton suspension part in the case of this video.

@maximiliandort3489 3 жыл бұрын

Ba'dumm'tssss

@ilham7345 3 жыл бұрын

@@Ripstikerpro oof

@rileyberkowitz 3 жыл бұрын

@@Ripstikerpro damn

@johno9507 3 жыл бұрын

@@maximiliandort3489 You may need a speech pathologist.

@ChanManStan 3 жыл бұрын

I'm guessing 70% of the comments will be carbon dust is dangerous where is your PPE For real though that dust is itchier than fiberglass insulation, not fun to work with

@Matt_matt1 3 жыл бұрын

Breathing in fibreglass dust is an easy way to get emphysema

@ChanManStan 3 жыл бұрын

@@Matt_matt1 that's why I face away from the shower head

@Cyberdactyl 3 жыл бұрын

He'll make a few more videos and then announce he's come down with Byssinosis.

@Chris-cs9sd 3 жыл бұрын

Dust? Look at his ungloved fingers right next to a cutting wheel, which have a tendency to kick back.

@dulisha 3 жыл бұрын

@@Chris-cs9sd yeah I got anxious when I saw that close up of his left hand fingers just asking to be cut lol

@yjasper8411 3 жыл бұрын

wow, breath it in, all those carbon dust

@robertsestito6821 3 жыл бұрын

Seriously wtf thats horrible

@TundraJason 3 жыл бұрын

I'm not one for following OSHA crap, but I will wear a respirator when cutting fiberglass/carbon. That crap doesn't break down in your lungs.

@DucatiKozak 3 жыл бұрын

Worked at a race team (won Daytona 🎉) carbon layups & part completion for 1 yr. It's incredibly unhealthy, even with saftey measures. Yes that carbon dust will remain in your lungs forever. It's relatively inert (but will cut & bury deeply forever), but not the epoxy, even cured. That will alter your DNA. Only now is the industry realising what ailments a career carbon man carries. To all that emulate this, wear a proper mask with an excellent seal around your face & cut under a negative pressure evacuation hood.

@philippgampe8120 3 жыл бұрын

In a time where facemasks are more common, that is shocking to see...

@zer0751 3 жыл бұрын

@@DucatiKozak what team? What category?

@solidus4prez 3 жыл бұрын

Would breathing protection have been a good idea since you're cutting into carbon?

@danort17 3 жыл бұрын

Not only good, but necessary! The carbon dust is highly carcinogenic

@marcohoekstra 3 жыл бұрын

Too late now 😜

@seancrabtree5217 3 жыл бұрын

I was thinking the same thing when he started cutting it. That stuff is a huge irritant to skin. Can’t imagine what that’s like for the lungs.

@maxusbh 3 жыл бұрын

Breathing protection and he also didn’t wear gloves! Watching him put his thumb on the debris shield had me cringing, so many things done wrong in relation to properly handling this sort of tool, lucky he got the job done without cutting a finger off.

@Njabuloseh 3 жыл бұрын

Yes mom.

@weignerleigner3037 3 жыл бұрын

According to the thumbnail Scott Mansell is what you find in a f1 helmet

@OrdinaryLatvian 3 жыл бұрын

Scott Mansell for Redbull confirmed.

@callumdean 3 жыл бұрын

@@OrdinaryLatvian hulkenberg replacement found

@f1motorsports985 3 жыл бұрын

Just seeing Grosjean’s helmet melted after his absolutely enormous crash at the Bahrain ‘20 race was fricking scary. That heat must have been insane and he was in there for quite a while. Have a speedy recovery tho!

@Egerit100 3 жыл бұрын

What r u talking about? Pardon my lack of knowledge but idk what any of what u just said is

@f1motorsports985 3 жыл бұрын

@@Egerit100 Did you watch the race?

@Egerit100 3 жыл бұрын

@@f1motorsports985 no

@f1motorsports985 3 жыл бұрын

@@Egerit100 So Bahrain 2020 race, Grosjean had a huge crash(just search Grosjean Crash) which literally melted his helmet

@Egerit100 3 жыл бұрын

@@f1motorsports985 ok

@alexanderblix6544 3 жыл бұрын

Umm, cutting Carbon with no mask? That is highly dangerous!

@squidcaps4308 3 жыл бұрын

When cutting things in half, do not finish the first cut. Leave just a bit to the end. Then cut the other half. A trick my dad has taught me, it makes everything easier. The whole thing still holds its form and doesn't start to flex. When you have done the long cuts, then cut the "tabs" that are left. It is a bit like when you weld things together, first you tab it, then you weld it. Cutting works in opposite, first the long cut, then the tabs that are left to hold the thing in shape.

@BrunodeSouzaLino 3 жыл бұрын

That also reduces the chance of kickback caused by both halves of what you're cutting pinching the blade.

@alunesh12345 2 жыл бұрын

@@BrunodeSouzaLino Believe in JESUS today, confess and repent of your sins. No one goes to heaven for doing good but by believing in JESUS who died for our sins. GOD loves you soo much unconditionally.🤩❤🤗

@BrunodeSouzaLino 2 жыл бұрын

@@alunesh12345 I only believe in the atom bomb.

@marcelv4485 3 жыл бұрын

I think you should know that breathing carbon fiber grinding dust is really really dangerous. Next time mask up.

@MrCatsvanbags 3 жыл бұрын

Scott, can you please show us the display cases once you're finished? I'm sure some of us would love to see them mounted up proper.

@alunesh12345 2 жыл бұрын

Believe in JESUS today, confess and repent of your sins. No one goes to heaven for doing good but by believing in JESUS who died for our sins. GOD loves you soo much unconditionally.🤩❤🤗

@FreeOnGoal 3 жыл бұрын

Next episode: What's Inside F1s Helmut?

@sbinnala14 3 жыл бұрын

Lol

@manuelquintero6943 3 жыл бұрын

Pure ideas of how to ruin young talents career's

@JG-ib7xk 3 жыл бұрын

Nothing

@andreacandela3999 3 жыл бұрын

*Cuts Helmut Marko in half*

@_abk_3251 3 жыл бұрын

@@andreacandela3999 finds souls of the red bull academy drivers that failed to make it into formula one

@Christopher_S 3 жыл бұрын

Okay this was interesting, but can I ask. Not wearing a dust mask, is it okay to breathe carbon fibre etc, particles in?

@Tsukuyomi28 3 жыл бұрын

No it's super dangerous.

@Captainspamo 3 жыл бұрын

It's very very far from okay to breathe in. Shit stays in you lungs permanently.

@Christopher_S 3 жыл бұрын

I did *think* so, but wasn't fully sure. It's not something I've done or will ever do, so was making an educated guess that it wasn't. I hope Scott is okay from this.

@johno9507 3 жыл бұрын

If you've ever worked with fibreglass or carbon fibre you'll know how it sticks in your skin and itches like crazy...now imagine that stuck in your lungs never to come out, slowly tearing your lungs apart, leaving pustules and scar tissue till you can no longer breath or a tumour devours them till you slowly drown in your own blood and pus.

@DucatiKozak 3 жыл бұрын

CSwords, NO! I've commented in other comment threads on this page. I will repeat myself here. I worked for a race team in the carbon fibre dept. for a duration. Carbon fibre cutting dust has 2 components, the carbon fibre & the cured epoxy. Carbon fibre dust will burrow into flesh and remain forever, mouth, nose, lungs, stomach & intestines. This is not good but not lethal. The epoxy resin used in carbon layups such as prepregs are EXTREMELY carcinogenic. Even cured, you don't want that in your body. Long term studies are being completed, now that carbon fibre has been used widespread for over 20yrs, Im certain it will prove very dangerous. Over the past 10yrs the industry has set standards, standards that Scott Mansell, Driver61 disregarded and should have put in a disclaimer to educate his audience. I hope this helps everyone understand the dangers.

@grege2383 3 жыл бұрын

Those grinders that use an on/off vice deadman switch are deadly! I had one kick out of my hands and the wheel hit the inside of my leg where my femoral artery is. Had I been using one with the on/off switch it would have cut it wide open. Having the deadman switch it only put a small cut on my jeans not going thru

@BrunodeSouzaLino 3 жыл бұрын

Especially when you're operating one without the handle and holding the body of the grinder with both hands.

@blastfromthepast7119 2 жыл бұрын

Finally a comment about his handling of the grinder. There was little to no need for him to put his hand and fingers where he was.

@monteiro5306 3 жыл бұрын

Very impressive Scott! Your videos getting better and better. Really awesome. Greetings from Brazil.

@st3althyone 3 жыл бұрын

Thanks for bringing us all this great content Scott, it’s greatly appreciated!

@alunesh12345 2 жыл бұрын

Believe in JESUS today, confess and repent of your sins. No one goes to heaven for doing good but by believing in JESUS who died for our sins. GOD loves you soo much unconditionally.🤩❤🤗

@nowheretosit 3 жыл бұрын

Never mind the helmet, I was worried he was going to damage the irreplaceable '97 upright. Seemed crazy to use such a valuable part right under the blade.

@MegaCm123456 3 жыл бұрын

No mask for carbon dust??

@zfloz9895 3 жыл бұрын

Im not watching F1,but I'm always interested in their tech. I'm a huge Mercedes brand fan,and I'm so glad that they do so well in F1 racing !

@jessereddragon7617 3 жыл бұрын

excellent video but for sake where a mask when cutting carbon fiber, fiberglass, woods, tiles ect, we need more Drver61 videos in our future

@leventenagy4302 3 жыл бұрын

I'm just cringing seeing you use an angle grinder with no ear protection, gloves and N95 mask 🤪🤪🤪🤪

@duckmucker 3 жыл бұрын

Aren’t gloved generally a bad idea when it comes to cutting/spinning equipment as it pulls your hand further towards the machine and it has lots of loose hits?

@MikkoRantalainen 3 жыл бұрын

@@duckmucker Obviously you should use gloves designed for angle grinder work. It's true that incorrect gear may be more dangerous than not wearing anything.

@TherealLorinser 3 жыл бұрын

Satisfying Part: when the helmet falls in a half after it's Cutted.

@MikkoRantalainen 3 жыл бұрын

It nicely demonstrated how rigid the helmet is. Until the last little bit was cut the helmet wasn't already warped away. If that was made out of plastic like some cheap helmets it would have been nearly melting near the end of the cut and pieces would have fallen away from each other long before.

@collinmatthews4176 3 жыл бұрын

Great video! Helmets are just going to keep improving which will be exciting to see.

@oblaty 3 жыл бұрын

you really should be wearing a respirator when cutting it :D

@cyrusthegreat3553 3 жыл бұрын

1:26 rip neck

@StasMskyy 3 жыл бұрын

cutting carbon with no mask, oof

@somethinganything4864 3 жыл бұрын

They actually don't have the zylon strip anymore. They just decreased the size of the visor opening.

@joecalobeer6396 3 жыл бұрын

Yeah, I agree! At least a dust mask. But... now that the helmet is divided, maybe a thin sheet of some sort of clear plastic attached to the cut edges? Then of course you have to have a ways of rotating it on a stand! You know, so you can display both sides.

@Supatrader 3 жыл бұрын

just like an F1 car, as well as its tire, the helmet is much simpler than i imagined once it's cut in half.

@gamershadow1 3 жыл бұрын

FYI the audio is messed up at 9:00.

@Firashelou 3 жыл бұрын

you cut it in half and cut my heart with it ! great video well done !

@xXUnoriginalNameXx33Meygaera 3 жыл бұрын

After today's race, I'm glad to know that literally every safety feature you mentioned, from Hans device to heat resistance, was tested and proven to a passing grade. Well done helmet engineers.

@alunesh12345 2 жыл бұрын

Believe in JESUS today, confess and repent of your sins. No one goes to heaven for doing good but by believing in JESUS who died for our sins. GOD loves you soo much unconditionally.🤩❤🤗

@xXUnoriginalNameXx33Meygaera 2 жыл бұрын

@@alunesh12345 nah, I believe in something greater. Myself

@omniryx1 3 жыл бұрын

An engineer who works for one of the F1 helmet manufacturers told a group of us once that an F1 helmet, fully fitted out and with the lining tailored to the specific driver's head, costs the company about $300 out the door. Some sell to the teams for as much as $5000 each and that is for 15-20 helmets per driver per year. Asked why the huge markup, he said that everything else on an F1 car is horrifically expensive so why not? Apparently the owners don't balk at the price.

@PbPomper 3 жыл бұрын

I would definitely be wearing a mask with all that (probably toxic) dust coming off.

@johngreen8693 2 жыл бұрын

Fascinating, especially about the additional strip above the visor. The self darkening/ heated visor seems to have more tech than the helmet. As said below, WEAR A MASK when cutting and fibres!!! I'm also amazed at the difference between motorcycle and car helmets - different homologation?

@Fastliner8 3 жыл бұрын

Didnt they remove the strip ontop of the visor in the most rescent soec helmets and istead made the vieuwport smaller so that the forehead would be more protected with the shell instead of a visor extention?

@user-rq2mp4dr5l 3 жыл бұрын

From outside it looks like the visor opening is smaller but it is actually slightly bigger than the previous helmets that had the strips, I don't remember where I saw this from, but I'm sure it's true

@tom9571 3 жыл бұрын

Great video, but, they don't have the zylon strip above the vizor now. Since bringing in FIA 8860-2018 helmet spec they removed it. I believe the new spec closes the window and reinforces the edge so it is not needed.

@migy5031 3 жыл бұрын

You’re quite steady with that grinder! And the suspension component worked surprisingly well for the task.

@alunesh12345 2 жыл бұрын

Believe in JESUS today, confess and repent of your sins. No one goes to heaven for doing good but by believing in JESUS who died for our sins. GOD loves you soo much unconditionally.🤩❤🤗

@DriftKr6l 3 жыл бұрын

Should have paid to get it waterjet cut

@jordanstriker1656 3 жыл бұрын

Fantastic educational video #Driver61 Keep up the great work!

@Woodtyper 2 жыл бұрын

The foam insert that you refer to as "Styrofoam" is not expanded polystyrene, but is in fact expanded polypropylene bead foam, marketed under the name ARPRO, by a company called JSP International. It is one of the most technically advanced forms of engineering foams in the world in terms of strength to weight ratio, along with other high performance characteristics. There you go.

@richardhayter3919 3 жыл бұрын

This is why I love KZfaq, its watching amatures do dangerous stuff 🤣🤣

@lohithreddy6629 3 жыл бұрын

Common guys it’s enough with those comments about cutting CF without mask you are scaring the shit outta my man here

@faxmachine3337 3 жыл бұрын

Good, stuff that can permanently effect your health it’s not to be downplayed!

@miguelcontreras5782 3 жыл бұрын

Suicide drinking game: Drink a shot every time he says “helmet”

@derekst.gelais5261 3 жыл бұрын

This is the 1st time I've seen the timeline of the video broken into sections. That is very cool!

@chesspiece81 3 жыл бұрын

Back when I still could ride motorcycles (a bad wreck stopped that for me) I loved my helmets and watching this was heartbreaking but I'm glad you did it

@WalterBurton 3 жыл бұрын

Super-cool. Jumping into the sim toot sweet. 👍👍👍

@Fwr942 3 жыл бұрын

This video is super interesting. Thank you.

@WaRLoKWYATT 3 жыл бұрын

I hope people know how precious a good helmet is and how attached you can become to something to seemingly inanimate. This was probably harder than it seems to cut it in half, especially if you have wins with that helmet.

@vanceheard5543 3 жыл бұрын

I love fun facts! Great video :)

@fkirsch87 3 жыл бұрын

Thankfully it worked today for Grosjean!

@WalterBurton 3 жыл бұрын

Good job on the cutting. Trippy. 👍👍👍

@MrTonka 3 жыл бұрын

Scott Mansell survives years of top level racing, dies of carbon dust inhalation. Only in 2020 do we wear a mask to get groceries and not when cutting carbon materials. All in good fun Scott, enjoying the channel. Cheers.

@chadwhiney4410 2 жыл бұрын

Heated up for 45 seconds at 700 Celcius: Niki Lauda: I was in a flame for a whole minute with a less safe helmet

@CookRacingUK 3 жыл бұрын

Would love to see some testing demos for the high end (Arai maybe), mid range (Bell) and cheap end (V2) helmets. Would be interesting to see where the money is spent. I go mid range, because I have a mid range head...

@mohdazam4192 3 жыл бұрын

It's amazing you still alive by breathing carbon fiber dust😂

@Richard.Hybels 3 жыл бұрын

I’m in America and had my helmet from 15 years ago painted with the Union Jack on top in the precise same way. The union Jack is very pleasing to my eye and the UK is the motor racing capital of the planet so a bit of an homage. Loved it but somebody stole. Great channel.

@gerardmontgomery280 3 жыл бұрын

Heated visors, can't wait until they filter down to affordable bike helmets.

@dirtrider88 3 жыл бұрын

they are already on $200 (and possibly cheaper) snowmobile helmets.

@NewfieOn2Wheels 3 жыл бұрын

there's already a number of motorcycle helmets with heated visors available as an option

@DaniMacYo 3 жыл бұрын

0:16 I was there in 2016. After the race I walked over to T3 in hopes of finding whatever of the McLaren I could. Nope the track Marshall's cleaned up very well. I did however get me some pirelli tire marbles, gravel rocks and green pain chips mixed with Alonso's car colors from the wall on the left. LOL. Nice enough souvenir I'll take it.

@intrepid_wandering 3 жыл бұрын

This has to be one of the best racing channels period.

@LamagraLila 3 жыл бұрын

Good stuff scott!

@dickyyy116 2 жыл бұрын

I’m from the bathroom industry. We use De-mister pads... 1 way foil matting place behind a silver/glass sheet meaning full demisting. We used to use little wires in the 90’s but even for little shaver mirrors, wasn’t a complete system. Wonder how many years it’ll take to adopt? Some companies use the conductor foil as the mirror itself but viewing from reverse you can’t even see the layer, just SB and mirror

@ThisLadWayne 3 жыл бұрын

So basically you are screwed if you crash into an angle grinder.

@PilotJohnSilver 3 жыл бұрын

Yeah, but it has to be a very slow crash, because otherwise the blade will break first 😆

@ThisLadWayne 3 жыл бұрын

PilotJohnSilver wonder how easily the halo gets cut ?

@PilotJohnSilver 3 жыл бұрын

@@ThisLadWayne I guess you can cut almost everything with the right tool 😉

@kinglukluk3016 3 жыл бұрын

Now I know more - thanks for the video 👍

@juliangramajo7010 3 жыл бұрын

so cool, upload a finished display case picture to the community page!

@madkhaliqfarhan 3 жыл бұрын

9:34 Awww, that blue carbon... It's beautiful!

@DaniMacYo 3 жыл бұрын

I was wondering about the heated visor part. Today while playing Assetto Corsa I noticed that in the F2004 Ferrari on the left side of the car inside panel it said Heated Visor like a button or switch. Never noticed that before or knew anything about it. So this was in 2004 so what you've explained could be the exact same thing but probably more newer tech or a newer way of activating it. That's really cool to know. The F1 commentators don't mention this LOL.

@Cipher422 3 жыл бұрын

Is it a coincidence that this was in my recommendations just after I got news of Romain Grosjean's crash in Bahrain?? 🤷🏻‍♂️ Anyway fascinating video as always??? 👍👍👍

@garykearney8202 3 жыл бұрын

Cool vid, you must wear impact rated safety glasses whilst using an angle grinder though! Not worth the risk if the blade lets go for any reason! Surprising considering the nature of the video 👍

@HurraWubba 2 жыл бұрын

If you closely at 6:43 you can see he is wearing a pair of safety glasses

@garykearney8202 2 жыл бұрын

@@HurraWubba they’re not impact rated, which was my point :)

@philmanson2991 Жыл бұрын

Just used your code and bought a GORGEOUS Ferrari Team Summer Jacket for $142.50!! Thanks so much, fellow motorhead!

@auzzyboy276 3 жыл бұрын

Omg fascinating! Love the engineering involved in helmet production however not needed for my virtual sim racing :p

@kukumbagumba2264 3 жыл бұрын

Lmao they have pieces of F1 cars just laying around😂😂😂

@27kemira 3 жыл бұрын

Great job

@ScumbagHorse 3 жыл бұрын

Man, that's one well made helmet! I wonder how it would compare to a modern one. Also, todays sponsor was great. Got myself a Mercedes umbrella to celebrate the win!

@rocketsurgery1085 3 жыл бұрын

thanks for breaking down the metrics mph / kph etc.

@tristanpage6805 3 жыл бұрын

Another great video.

@markmarlow 3 жыл бұрын

You should of used a band saw and a mask a lot safer but a great idea on what to do with an old helmet

@dc43tokyo 3 жыл бұрын

Beautiful. Any backstory on the design regading the colors and the Buddhah?

@maximiliandort3489 3 жыл бұрын

the heat resistance is astonishing :o

@MikkoRantalainen 3 жыл бұрын

Great video! I would have preferred water jet cutting for even cleaner cut and less dust. How much did that helmet weight before cutting?

@MATTjew100 3 жыл бұрын

Never mind the carbon dust I was more worried about hitting that strut with the grinder.

@yjasper8411 3 жыл бұрын

btw is there a way to buy those old f1 uprights?

@Ben-gm9kx 3 жыл бұрын

Finally a KZfaqr who promotes something ill actually purchase from. Great video I take that back, they don’t deliver to Australia

@danielbontorin4783 3 жыл бұрын

Dude...awesome!

@julieli6313 3 жыл бұрын

great video 🚀

@federicoeiriz42 3 жыл бұрын

i hope your lungs are fine bro dont be worried about it, awesome content!

@laughingman3777 3 жыл бұрын

Next time wear a respirator when grinding carbon fibre. You don't want carbon dust in your lungs. The fibre particles act similarly to asbestos. Also the melting polycarbonate releases toxic gas as it burns 7:47.

@emma-eventing 3 жыл бұрын

@dzk33 3 жыл бұрын

I'm curious: apart from the heated visor and HANS, are these actually any different from high-end motorcycle helmets?

@avada0 3 жыл бұрын

2:35 How? That would be the interesting part. As far as I know electrochromic glasses are much slower, LCDs on the other hand eat-up half the light to begin with (eg: active 3d glasses)