What's New Siemens NX 2206 & CAD Secret - the Selection Program & Face Group trick nobody knows?

Рет қаралды 6,883

Bizlearn - Siemens NX Blended Training

Жыл бұрын

👉👉👉 SUBSCRIBE for more content:
/ @bizlearn_siemens_nx_t...
👉👉👉 The ultimate NX CAD Secrets Beginners Playlist:
• Siemens NX Beginners a...
👉👉👉 NX 2206 Update training required for large groups or even single sets? We are ready to enroll you into the best Online Learning Platform available: the Bizlearn Online Campus 🤓 Contact us via info@bizlearn.de or visit
www.bizlearn.de/en/nx-continu...
for more information!
NX 2206 was released in June 2022 and we have delivered suitable and very unique update trainings to more than 20,000 participants in 8 languages already (-:
The video shows an excerpt of the Bizlearn NX Beginner training portfolio.
🤓 ALL of our NX update and beginner trainings are spiced with NX CAD Secrets and practical workflows! We do not just deliver a video-documentary! The Bizlearn training is a storytelling experience and allows you to connect with one of the most experienced and successful CAD trainers on the globe. Our passion is training and entertainment. And we love to communicate with our participants 😍.
NX 2206 was released in June 2022 and now we have already finished the complete video training (-;
Video Content:
The video shows a review of “What’s New Siemens NX 2206 - Selection Program”. I am going to explain the Selection Program, show the enhancements and combine it with the Face Group feature to use it in a more efficient manner.
Thank you, Siemens, for developing the NX software into the right direction!
For German, French, Chinese or English update training participation, please don’t hesitate to get in contact with us: info@bizlearn.de
The update training is already available, starting from version NX11 if you wish (-;
By the way - we offer a Siemens NX online training concerning modeling methods. Just get in contact (;
#siemensnx #nx1980 #nxtutorial
Further information can be obtained via info@bizlearn.de
Impressum: www.bizlearn.de/impressum/
Background music composed by Aleksandr Shamaluev | © MotionElements Pte. Ltd.

Пікірлер: 13

@grenoblica Жыл бұрын

Great video as usual, and this is a really nice way of doing things

@polmokoni2643 Жыл бұрын

Hello, thank's a lot for another quick video which focused on small but important improvements!

@Bizlearn_Siemens_NX_Training Жыл бұрын

Hi and thx for the positive feedback. The latest release covers some more tasty improvements - new content will follow soon (-: Have a nice day!

@polmokoni2643 Жыл бұрын

@@Bizlearn_Siemens_NX_Training Thank you for inormation, Iˇm looking forward to it. Have nice day too!

@fgalmeida2 Жыл бұрын

Hi Simon Thanks for the great instruction video about Selection Program, i have try to use it in NX2007, but it seams it was only working with Workplanes ? as reference for selection ?, i hope soon you have some video also about how the -Prediction selection comand Also i know why the command group face is over processing after you finalize the selection program (it is not a bug) - the Reason is because you have the option Find Clone and Find Relate Face enable , if you disable it you will see it will not over process... Please try and let me know if i was correct or not :)

@Bizlearn_Siemens_NX_Training Жыл бұрын

Hihi, correct - the feature relation is only possible since the latest release. And thanks for the feedback - I will check the settings and let you know. Have a nica day!

@amitkamble4658 Жыл бұрын

Edge blend consumes edge. Outer edges of face selection intent rule allows face selection because face can be selected with feature faces rule. Edge can not be selected with feature rule. So here face selection is allowed by selection intent rule. Selection program is nothing but new selection intent rule and should be considered as other rules. If "outer edges of face created by a pattern feature" is allowed in selection program then it will become more complicated. Selection program allows only those entity selection which are consumed/can be referenced by parent comma d from which selection program is launched. Edge blend consumes edges thats why only edges are allowed in selection program here.

@Bizlearn_Siemens_NX_Training Жыл бұрын

Good point (-:

@muayyedelhuseyni9331 Жыл бұрын

🤚🏻Hi What is the superiority in the version of the program nx(cam)1953 and version 2206

@Bizlearn_Siemens_NX_Training Жыл бұрын

We do cam trainings, but this channel's focus is cad. Sorry

@amitvishwakarma7452 11 ай бұрын

Nx turning machine fanuc contro post prosses

@ehsanshahrjerdy9606 Жыл бұрын

Nx Siemens hasn't enogh toturial content, although nx is power software, but until hasn't user-friendly interface and toturial content... As you can see the number of contact that share a comment

@Bizlearn_Siemens_NX_Training Жыл бұрын

There are a lot of professional training services for any NX topic you can imagine. Can't see your problem