What's Wrong With This Ferrari 458 Engine?

No video

What's Wrong With This Ferrari 458 Engine?

Рет қаралды 28,587

Күн бұрын

We take a look at a Ferrari 458 engine, after the owner asked us to check if the work done by another company, had been done correctly...
ORDER YOUR REP MERCH: 👉 reperformance....
If you enjoy the video, then hit the like button, leave a comment and don't forget to SUBSCRIBE! Thanks guys!
#PoweredByMotul #Motul #Ferrari #458
www.motul.com
✅ Standalone engine management specialists Syvecs Ltd & MoTeC
✅ State of the art MAHA Dynamometers 4WD dyno facility
✅ Maintenance and tuning for R8, Lamborghini, Ferrari, McLaren
✅ Official Akrapovic Exhaust System dealers
-----------------------------
Check out Pro-Detail uk for Xpel paint protection film, Ceramic Pro nano coatings, paint correction, preparation & appearance
-----------------------------
📞01793278069
📱07786170031
📧info@REPerformance.co.uk
🌎www.REPerformance.co.uk
Follow us:
/ reperformanceuk
/ reperformance

Пікірлер: 149

@hotblackdesiato3451 4 ай бұрын

Spoiler Alert - in this episode Ricky throws a Ferrari engine into a skip before going on to create the first Audi powered 458.

@vogs72 4 ай бұрын

One of Modena’s finest translations in that workshop manual. The look of bewilderment on your face is priceless.

@christopherboyle1479 4 ай бұрын

Grit and paint under the cam covers, not turning smoothly when rotated without plugs in, missing /non-original fasteners, re-used gaskets? Run a mile before you get blamed for the inevitable failure.

@0nelifeliveit1987 4 ай бұрын

Guess the thing on his side is that the procedure was recorded.

@Tracertme 4 ай бұрын

That’s a given..❤

@knight2425 4 ай бұрын

I have nothing but admiration for the skill you demonstrate with this kind of work. When I was growing up many years ago I was always told not to be a mechanic as it’s a brain dead job but I think you are showing with certain cars it is anything but and in fact you need to be just as precise as a brain surgeon! Keep up the great work and look forward to seeing you on the bike again soon no doubt it will be quicker after the rebuild

@garysimpson8860 4 ай бұрын

Ferrari specialist now , just like rs6’s 😂 Jesus I gave up trying to understand what you was explaining after 5 mins in , but I did watch till the end 👍

@REPerformanceUK 4 ай бұрын

😅 thank you for watching

@simonpriestley6912 4 ай бұрын

I love these type of vids, I love a nerd out on stuff I don’t entirely understand and will certainly never do myself . Keep it up chaps 🤘🤘

@martinstone3656 2 күн бұрын

What day do the binmen turn up? You boys are the best by a country mile, keep up the vids

@Uber-GT 4 ай бұрын

Superb content loving the direction the channel is going.

@REPerformanceUK 4 ай бұрын

Glad you enjoy it! Thank you for watching

@TheUberdude14 4 ай бұрын

you are one brave man, i would have turned this one away

@toeknee2u 4 ай бұрын

Soon as we discussed 'grit' & re-used gasket I thought it'd be going back - ... thanks, but no thanks. I wouldn't want to have wrenched on that before it goes bang ...just sayin'

@REPerformanceUK 4 ай бұрын

I’ll set the timing correctly and advise it is stripped down for investigation. Now the timing is set they can just drop the cams off using the alignment markings on the caps.

@Google_Is_Evil 4 ай бұрын

@@REPerformanceUKMake sure you have that done in writing and somehow proof that they got the message. UK law is very protective of customers as you are well aware so you will want to cover your behind properly when working on things like this. This thing is going to have a lot of wear happening if it doesn't spectacularly has a catastrophic failure when it is started the first time with the sand pit that is now stuck inside.

@markhobbs2907 4 ай бұрын

Always love the content and the honesty guys 👍. This one brought back some nightmares. I had an engine a while back that I had more dials on it then Big Ben😂. The only thing I do if it’s been built elsewhere and if possible is a leak down pre and post had someone try to pull one over on me many years back. Keep up the good work guys 👍👍

@robinuttley4968 4 ай бұрын

Great video, although the way that Ferrari workshop manual was written was giving me a headache!

@jdmimportlogistics 4 ай бұрын

Cracking episode Ricky! So good to see how you problem solved with an engine you are not familiar with compared to the Lambo/Audi/ McLaren stuff you're expert at. For us amateurs any engine will involve many moments of perplexity so this is a good example of how to work through different issues.

@studio106raleigh 3 ай бұрын

I gotta do TDC timing on a bike in the morning, this is a perfect motivator. Love your vids guys. -USA

@user-yu1jj8lw6t 4 ай бұрын

Love these type of videos..Nice 1

@kevjackson6116 4 ай бұрын

I found ypur chanel through barham engines when he had his car serviced with you, ived watched every video you done since and some previous too, loved it more when I see you do bikes too and race them, bad misfortune last weekend though, sorry to hear just glad it wasn't worse mate, bike can be fixed you can't as easily, that enso engine I would of sent right back until it had been totally rebuilt and then timed it up, 4 hours to do two Wow.. I see trouble ahead for thst engine though sadly,, anyway keep up the great videos and the humor in rhe garage you all do a great job

@markysparky1965 4 ай бұрын

The bike content you put up is the best imo. Subscribed because of it but your car tech and rants are always great viewing. I came back to this video from your 'is KZfaq worth it' video. Whike scrolling though your list of uploads i noticed that your bike videos, on average, seem to get many more videos than your car content, maybe you should concentrate on them to build your subscriptions and views?

@andrewcruickshank2093 4 ай бұрын

19:53 is the perfect thumbnail photo 😂😂😂

@royclarke8455 4 ай бұрын

Just watched Mat Armstrongs video of him timing up his f430,it looks the same engine

@sonicthehedgehog19881 3 ай бұрын

Dear Ricky as your Doing this for KZfaq for Us consult KZfaq Love this Channel Ricky Baffled us as well.

@whizzo94 Ай бұрын

After removing the cam covers and finding grit inside, I think the best course of action would have been to just stop and tell the customer to collect his engine ?

@ldtenenoff 4 ай бұрын

at 19:54 Benny Hill appears confuckeled lol Ricky again man thanks fer the smiles man.

@REPerformanceUK 4 ай бұрын

You’re welcome. Thanks for watching

@ohboy2118 4 ай бұрын

Loved this video Ricky. Italians love to make stuff stupidly complicated. Why couldn't the white coats from the lab do all that work then write the manual for the workshop guys following a full 720° crank rotation method in the correct direction as the engine operates? You could still use dial guages to measure valve travel at a set crank position then adjust accordingly. Who turns engines backwards ffs?

@jasoncasey-eggleton4327 4 ай бұрын

the look of confusion on carl and rickys faces are pure comedy and needs to be on a tshirt haha

@keithwaller4545 4 ай бұрын

Excellent video Ricky. My Ducati 1200 multistrada bit the same as in cam sprocket cut outs don't line up with head marks anymore. Like the old 996 . So you would have to dial gauge to time if you didn't lock up to change belts. Used to do the Vauxhall diesel back in 90s there system was good bolt on pointer for tdc . Then a plate bolted to cam carrier which you put in dial gauge set up. Then slide along plate to then measure valve lift. Adjustment on taper cam drive.

@rockyalwayswins1495 4 ай бұрын

Love the videos guys. Karl is brilliant i love that guy he is just so funny 😂

@brian623 4 ай бұрын

Not everyone realises how cleaver you are your knowledge is fantastic 👍👍👍

@richb6549 4 ай бұрын

Rickys rants 😂😂 Honda friends got me 😅

@geoffhooke4388 4 ай бұрын

Luv this content too, Ricky. Does it have a coolant/oil cooler? My 360 does, luv to delete it in Australia. Warm enuff to heat up oil without using coolant.

@loganmarriott11 4 ай бұрын

Excellent episode. Confirmed so many of my fears in the logic of that manufacturers assembly !

@jimmcculloch3786 4 ай бұрын

Loved it, i respect the bike stuff you do, but between this and the oil pump you did! A feast to the eyes and ears :)

@denisbassom172 4 ай бұрын

Good (almost!) example of how to time cams. Unfortunately I have to time mine using peak cam lift, just that little bit more fun. Takes nearly a day on a quad cam.

@Dungfunnel 4 ай бұрын

As a semi professional dial gauge/clock/dti user I noticed it straight away and I’m watching videos upside down in New Zealand. I have used one thousands of times though. I actually had a look in the comments to see if someone else commented about it.

@richardupcraft1287 4 ай бұрын

This the type of video I like, pointing at cars in car park doesn't do it for me, looking forward to the rebuild video after you tell the customer it was assembled in a sand pit with reused gaskets

@LucasAVP 4 ай бұрын

Brilliant! Had a perfect evening, great amusing video and a Belgian beer 👌🏻

@ashleygollop9100 4 ай бұрын

Thank you Rick I asked for more Ferrari content the beginning of the week and you delivered brilliant video 😊

@REPerformanceUK 4 ай бұрын

💜

@robsears7574 4 ай бұрын

Carls face when you reading the timing out loud 🤣🤣

@bart34vranken 4 ай бұрын

Rick, love the video is it correct to say the millimetres from top dead center is the same thing as degrees used in bike engines. I done loads of oem chains and cams but iam afraid to touch the yoshi cams in my race bike. I get the valve lift but struggle with the degrees

@jammymark 4 ай бұрын

I imagine Ricky's response if the cameras had not been on would be something like "oh f@ck right off!" And that's after seeing the paint in the rocker lids, forget the rest of it! 😂

@georgieliverpol 4 ай бұрын

That looked a right pain to do doh

@smudger6461 4 ай бұрын

That takes some balls man, well played sir..

@REPerformanceUK 4 ай бұрын

Thank you

@Tracertme 4 ай бұрын

Videos like this are what set you apart from your typical Maranello dealership outfit and many more garages who firstly would run a mile or say sure but 💯 client risk once we take a cam cover off. The whole factory instructions reads like a Kellogg cereal packet. If I was the owner I would want it stripped down and start from scratch… I hope he does not just parcel it up and sell it into the market because the next person is just buying a time bomb. Really really enjoyed the video content. you tube is becoming like email the tool that covers your arse.

@iandaw2363 4 ай бұрын

Another great vid team

@458Aperta 9 күн бұрын

Scary 😱 movie i definitely would give my car in your hands

@toeknee2u 4 ай бұрын

I hadn't seen you misread the guage (Rez on my phone Vs my eyesight 😅), but had thought to myself, plenty of scope to get that measurement wrong with the needle spinning like that! - you NEED another digital guage, you do😉

@oneeleven9832 4 ай бұрын

You could have done everything wrong i wouldn’t have had a clue🤣

@willmaltby6445 4 ай бұрын

That Ferrari tec not much use is he 😂😅

@torstenhein2979 4 ай бұрын

I was chuckling so much my tool fell out also! 😅

@gilesfone 4 ай бұрын

You are awarded the golden spanner for that one. Keep it in a separate box because it will probably set itself alight.

@pjvenda 4 ай бұрын

This must be a job coming from a very trustworthy source, who is well aware of the outcome or possible outcomes and in thr know about the quality of the build. Otherwise the business risk is astronomic...

@Chilled_Mackers 4 ай бұрын

I was expecting his missus to correct us all via the comments 😆 on his performance haha

@chrisward403 4 ай бұрын

Great video and really enjoying the variety of stuff you upload. Keep up the great work

@REPerformanceUK 4 ай бұрын

Glad you enjoy it! Thank you

@steinwaydoyle 4 ай бұрын

Naughty Naughty. Rick you're using power tools. Lol 😂

@stefanliversidge6091 4 ай бұрын

This is nerdy AF …. and I love it 😁🤓

@jerehada 4 ай бұрын

Drive you nuts that one. Was there something else wrong with motor apart from timing?

@lintonhart9814 4 ай бұрын

I wonder if the original manual written in Italian would be easier to understand?

@ralphmillais5237 4 ай бұрын

Why don't they just give a full lift figure for the cams? I admit I am no expert but I have fitted a few fast road cam kits in my time and I have never seen cam timing instructions like those. Weird.

@REPerformanceUK 4 ай бұрын

I know right!!

@paulmcintyre6140 4 ай бұрын

Great video 👍🏻

@REPerformanceUK 4 ай бұрын

Thanks 👍

@eliotdeag8040 4 ай бұрын

Jesus that's complicated

@keyboarddancers7751 4 ай бұрын

I'm an armchair mechanic and I can usually just about follow most procedures but I have to confess, I was completely lost with this one.

@andybegbie8553 4 ай бұрын

Are u gonna tell the owner about how notchy the engine is?

@suzywho1066 4 ай бұрын

Well done for doing that one not easy. 😊

@REPerformanceUK 4 ай бұрын

Hope you enjoyed if

@stevebez9556 4 ай бұрын

This is just ridiculous process!!! Never seen anything like it - especially with the engine so notchy

@anthonyewing2814 4 ай бұрын

Sorry to hear about your off. Engine braking calibration?

@REPerformanceUK 4 ай бұрын

No tyre not up to temp I think mate

@davedavies8002 4 ай бұрын

This dudes like the cast of top gear in one man 😂

@REPerformanceUK 4 ай бұрын

😂

@yazctr 4 ай бұрын

is the F430 engine just as difficult?

@BobJohnson-om2ww 4 ай бұрын

You should do an episode, “Reading manuals with Ricky”.

@ineedthatcar7169 4 ай бұрын

The morphine in RE is palpable! Pump it up indeed!

@pistonbroke5758 4 ай бұрын

We've all just witnessed Ricky's decent into madness

@REPerformanceUK 4 ай бұрын

😂😂

@lukeshardlow768 4 ай бұрын

Jeez that engines a bit of a mess, shame as it deserves a proper rebuild.

@sonicthehedgehog19881 3 ай бұрын

Ricky Karl has to Give his wages back to Ricky to make it look he’s got Friends at Re Performance just for the Show 😂😂😂😂😂😂😂

@Russell_Duncan 4 ай бұрын

When setting Ferrari valve timing, make sure your tool doesn’t fall out 😜

@Braveheart7914-idfl 2 ай бұрын

I’ve never liked or ever wanted a Ferrari this video just confirms why ! 👍🏻😳😂😂😂

@lordnibs758 4 ай бұрын

Wow!!!! mega video.....

@REPerformanceUK 4 ай бұрын

Thank you very much!

@electricsnut 4 ай бұрын

Why does this engine feel like being handed a grenade with the pin pulled?

@honda.spares.man1 4 ай бұрын

Karl's wisdom " Italians do it differently " 😂

@REPerformanceUK 4 ай бұрын

😂😂

@PedroMcMahon 4 ай бұрын

I want a feel the horse powers Carl t shirt

@motosteggy3980 4 ай бұрын

Speak to Mat Armstrong and his Dad, Lol!😂

@REPerformanceUK 4 ай бұрын

Hahahaha he would just tell me to ring myself for advice! 🤪

@stephencharlesworth2231 4 ай бұрын

Can we ask who did the original work on that engine, so they can be avoided?

@carlosoruna7174 Ай бұрын

Is the answer too many Italian tune ups...🤨

@tomevans4078 4 ай бұрын

@19:53 😂😂

@REPerformanceUK 4 ай бұрын

😂

@garystein9536 4 ай бұрын

Davlar wants a medal for editing Rickys tourettes

@REPerformanceUK 4 ай бұрын

🙈🙈

@steffydog 4 ай бұрын

Wowza

@REPerformanceUK 4 ай бұрын

🙏🏼

@mathewdavies1931 4 ай бұрын

Fuck the haters you do a spot on job brilliant content

@REPerformanceUK 4 ай бұрын

Thank you

@snrt9036 4 ай бұрын

Hi guys, been trying to get in contact about potential engine rebuild work

@REPerformanceUK 4 ай бұрын

Hello, have you emailed as not received anything?

@snrt9036 4 ай бұрын

@@REPerformanceUK yeah sent one a couple of days ago, to the email address on your website

@snrt9036 4 ай бұрын

Yeah sent an email a few days ago, to the email address on you guys website

@REPerformanceUK 4 ай бұрын

@@snrt9036 I’ll double check but don’t have much outstanding. Ricky@reperformance.co.uk

@suzywho1066 4 ай бұрын

Sorry about your poor bike but you will put it right.

@REPerformanceUK 4 ай бұрын

Thank you

@reno9k 4 ай бұрын

4.81 mm NOW WE'RE ON TO 3.24MM 1.76MM WHAT IS GOING ON

@BONKERSBUBAL-sq2yy 4 ай бұрын

I THINK YOUR A BRAVE MAN TO TAKE THAT ON . I BET YOU WILL TIME IT UP . AND THEN THAY WILL BLOW IT UP AND BLAME YOU . FOR THE CRAP JOB THAY DID . HOPE YOUR NOT GOING YO GIVE ENEY WARRANTY ON IT

@REPerformanceUK 4 ай бұрын

No I’ll time it up and then advise the owner to look at everything again. Once timed they can drop the cams off using the alignment marks on the caps.

@scott1171 4 ай бұрын

i feel my brain getting bigger whilst watching these videos

@REPerformanceUK 4 ай бұрын

🤓

@davidgerrard8661 4 ай бұрын

My head hurts

@REPerformanceUK 4 ай бұрын

🙈

@gothicpagan.666 4 ай бұрын

Why can't they just give lift@TDC values for In & Ex. Bunch of gits.

@andybegbie8553 4 ай бұрын

Is Karl very tall or u just small, lol 😆

@REPerformanceUK 4 ай бұрын

I’m 5 ft 11 mate….Karl is 6,6

@andybegbie8553 4 ай бұрын

@REPerformanceUK ha ha ha 😂

@daverose5557 4 ай бұрын

Rather you than me , doing that job

@jameshollister7710 3 ай бұрын

"I work with a bunch of peenae........."

@karljones 9 күн бұрын

Moral of video don’t f&ck around with Ferrari engines

@REPerformanceUK 9 күн бұрын

The engines are fine….its the assemblers who do a sh1t job!!

@cm-oo1td 4 ай бұрын

Id have got a grown up to do it 😁

@exotica550 Ай бұрын

Anyone else notice how Ricky is the exact opposite to Alan Millyard's work ethic? Alan is so quiet & precise at the same time as we are learning his excellent techniques for ,for example,that rat shit Norton Nemesis Project,that Alan is turning into the masterpiece it should have been in the first place. Too much noise Ricky...No singing,please.

@REPerformanceUK Ай бұрын

No one is making you watch mate! 👍🏼

@atomicdave1987 Ай бұрын

@@REPerformanceUK - ignore these idiots Ricky, I'd like to see them try even a tenth of the shit you do!