Whelen Pioneer LED 4 Channel Flasher

Рет қаралды 31,303

9 жыл бұрын

sirennet.com/whpflash.html The Whelen Pioneer LED 4 Channel Flasher (PFLASH) allows scene lights to be flashed for added secondary warning in "Clearing Right of Way" mode. This is particularly useful for fire trucks with brow mounted scene lights. This flasher can flash one or two Pioneer Dual lightheads, or 2 or 4 Pioneer Single lightheads. The PFLASH features a Steady-Burn Override, and Multiple Flash Patterns with 4 pattern phases for each pattern.
Features:
14 Scan-Lock flash patterns with 4 pattern phases for each pattern.
SYNC function included.
Steady-Burn Override Mode.
Includes 12 inch power wires with matching connector.
Includes crimp-on connectors, mounting screws and instructions.
Specifications:
Voltage: 12 VDC
Current Load per Channel (max.): 5 Amps.
Current Load Total (max.): 20 Amps.
Length: 5.25" not including mounting tabs.
Width: 2.75"
Height: 0.75" not including connector.

Пікірлер: 16

@alexlindsay724 9 жыл бұрын

Nice video

@CHANNELCHECKER381 7 жыл бұрын

Do you have a flash controller that would give the same flash pattern like the Whelen Liberty SX light bar? I am making my own LED light stick and really like the flash pattern of the Liberty SX light bar.

@anthonymassara4288 3 жыл бұрын

can this be used with a dual colored light head, but still have independent control of the color?

@randygreen007 5 жыл бұрын

Is there any chance the fps rate hits 40hz on any of your patterns?

@SIRENNET 5 жыл бұрын

Not that we're aware of. Thank you for watching :)

@connorjoslyn8445 7 жыл бұрын

How would you change the flash pattern once install. Once you get it set of the strobe pattern. Will is stay on that pattern so all you have to do is flip the flash switch and it will begins to strobe

@SIRENNET 7 жыл бұрын

You can set the pattern prior to mounting the PFLASH module. It has a post that when +12volts is momentarily applied, the flash pattern advances to the next. You would need to access this post or you could run a wire to a momentary switch in the vehicle so you can easily change patterns on the fly.

@robg7399 4 жыл бұрын

Would this flasher work with Rigid or Baja Designs led off road lights? Thanks

@SIRENNET 4 жыл бұрын

It should work fine. Keep in mind the draw the inputs are rated to handle and add relays if necessary.

@jamesgreen3574 8 жыл бұрын

is it possible to install this unit in the engine bay? thanks james.

@SIRENNET 8 жыл бұрын

The PFLASH can be mounted within the engine bay. You'll want to make sure it's away from water and excessive heat. Be sure to secure the wiring connected to it as well so that nothing becomes loose or gets moisture within it.

@billmorganmoo1481 4 жыл бұрын

will this work with a pair of whelen 500 steady burn led lightt heads?

@SIRENNET 4 жыл бұрын

Shouldn't be a problem.

@19DUNIT 7 жыл бұрын

Would this work with a 20" Rigid Industries LED light bar?

@SIRENNET 7 жыл бұрын

So long as the draw doesn't exceed 5 amps, the PFLASH can be used along with the 20" bar.

@dasarge84 4 жыл бұрын

@@SIRENNET sounds like this module to drive other lights like hella 500s and other driving lights by using it to drive the relays that run the lights so its pretty much a relay driver