Love your spray booth LOL! 🤣🤣

one thing you should do for the tires is scuff the rims bead with sand paper to get better adhesion just like you did for the paint. that way the glue has a rough surface to stick to instead of a smooth surface.

Kevin, you are the best. Two things: 1. The property you're looking for when gluing up tires is called... drumroll please... "capillary action"!!! Leverage the little runnels/grooves on the inside edges of your wheels. A small drop of glue into said groove will be actively pulled around the entire circumference of the wheel by, you guessed it! Capillary action! It doesn't take much glue at all (*another common misstep that I am constantly making - Too much glue!*) 2. The important shit --> I've been in and out of this hobby for what feels like a hundred and thirty billion years. Much like you, I consistently run across groups of actual grown men who would throw tantrums over toy cars. I'm talkin' conflict and infighting, joining and dropping from various RC groups as if they were gangs, and literally taking their tiny trucks home early in an angry huff. It is... hard not to laugh. But... While hilarious, this behavior also ruins my playtime. When I found your channel, I found another guy who just wants to have fun playing with his toy cars and trucks (*and tanks... and boats... hovercrafts... umm.. drones, planes, battlebots, rc insects-well shit... I think I have a problem*). To take this hobby even SLIGHTLY seriously, let alone to get your feelings hurt over it.... is unreal and something I just cant wrap my head around. Thank you for spreading the message that the RC hobby only has room for one defining metric: Are we having fun? Then we are doing it right! Thanks, Kevin!!!

Kev, thanks to you I have a tire shredding Felony and a money-funnel Hoss, and I couldn't be happier. You're in my Will.

Best mobil paint booth ever!! 😂 I purchased your Ebay course. I’m checking in out!!

I'm pretty sure Mammoth knew it had failures, how could they not? lol. Anyway, Kevin, you're an animal. I love the "Todays In Talbots Shop" videos. We used to have a hobby shop named "Talbots Hobby." When I first found your videos I thought you were the owner of the hobby shop. 😂

The WL TOYS speed buggy (IMO) keeps spinning backwards because the rear is heavier than the front. There’s also not enough traction on the front tires. The wheelbase is also too short for the amount of torque. Try adding a rear wing with MORE drag and the wind will keep the rear pushed back. Even try adding a front wing with fins to keep it aligned through the winds.

I absolutely love the racing content. Ty heaps for the exposure.

Would be fun to see some studded tires on ice and snow this winter. Mix up of rwd and 4wd.

I like how you talk don't change that. It gives passion and make the video to sound and appear alive.

Honestly Kev as an Aussie it's always blown my mind that Brits don't have split Air Con systems.. I've got 3 at home! There's no way I'd live without them especially in summer..

Quiet Kev doesn’t seem into what he’s doing. Loud Kev seems like whatever he’s doing, it’s his favourite thing to do! Loud Kev is my favourite!!

For the project world’s fastest dirt cheap RC car you should put vertical stabilizers on the back to help it go straight

That quad motor was a cool concept would definitely be cool to see a v2! Thanks to you again for helping to get me back into the hobby, I'm picking up my Kraton 8s EXB roller on Sunday >:)

When wasn't enthusiastic about what he was doing he literally sounded like a history teacher

2:07 I went out and won a couple of races and now I'm getting worse and worse...that's called beginner's luck lol welcome to the club my boy!

I'm expecting the "blah blah blah" at some point but it still, somehow, surprises me and makes me laugh every time. 😄😊 Excited for the Kyosho truggy too!

Got those heat and air units in our cabin here in the USA. They are amazing and so quiet you only notice them running if you stand next to it and hear the motors moving the fins. Thanks for the updates!

Super glue drys hard and brittle. Try using a product called Plumbers Goop. Drys flexible and sticks to almost anything. As another commented below, scuff up the wheels same as you do for paint. It will help adhesion of the glue.

I like seeing a bit of racing. Nice to have a club where everyone is more chilled.

2:15am and here I am watching Kev content, lovin it👌😂

Also Kev, your doing great out there racing man and I'd also look into changing your cars set up. My local Track manager is a Associated team driver and he has all the set ups for different driving. On Associateds website there is a tab if you search your car that shows different set ups for your cars spec

3:40 try swapping the front diff for one that has a higher gear ratio making the front wheels spin faster therefore pulling the car rather than pushing the car

Epic paint booth bruh! All these years I didn't know where I should be doing my painting! Now I know!

Once you get your buggy set up to where you're turning consistent laps the main key is throttle control and breaking into turns 'TIMING" especially with 2wd and finding the fastest line and trying your best to stick to it every single lap. During heat races you always gotta keep in mind your not racing the contenders you're racing the clock. Trying to battle during heats does nothing but slow you down and more chances of you crashing = loosing lol Love the racing content 🔥 Keep it coming 👍🏻

Always good video content and info. I especially love the back seat paint booth. I like how they change up the race track. To keep things interesting. Well done sir. 👍👍

Thanks for the new idea on paint booth. The last Thunburg Clip was especially well done. Made me laugh

i think that more quiet and detailed explanation part was nice too

Tyres are a big part of the racing setup, but its hard to get it perfect by only changing tyres. Look into geometry changes. Roll centres and link angles make a huge difference!

New paint booth Kev..lol ✨️ 👌 get a nice buzz driving to the market. Lol

Very cool Kev. I'm not sure what the done thing is these days but a little extra weight up front usually helps with 2wD....unless you've done that already.

LMFAO... I love your paint booth. WOW, lol.

Kev to keep it from spinning out, widen the track width of the front on project cheap 100mph and narrow the rear. This allows for one side of the car to still be traveling “straight” or directly in-line, even if the car sways back and forth some, works great👍🏻

Damn, that is a paint booth on another level!! lol!

‘Paint booth’ how do you keep a straight face kev! 😂😂😂

To glue tires, I like to use a rubber band around the tire to keep it closed, and I lift a part of the tire with my thumb and give it a good gluing. I also put a bead around the edges.

The level of sarcasm across the ocean is epic 👌

Kevin, the heater you have there is a 'heat pump' and they are excellent. However they become very inefficient once the temperature goes below about 5C and in freezing temps they are worse. That's why they aren't as popular in the UK. Plus to heat a house you a few units and an outside unit for each indoor one. It could end up more expensive than gas central heating to run, but then that was when gas was cheap…

Hahaha the paint booth 🤣 kev that tickled me

Try to get the center of mass further towards the front of the car. In rocketry and rc planes, having a the right cg is important for stability.

Fuel tube on the rear shocks on the little speed car to limit the travel on the rear shocks which will stop the front from lifting above the back and making the front go all light and then want to swap ends when you make a tiny input of the steering or the front wheels move

I like your mobile paint booth, Kev. Brilliant. 🤣

Kevin. To help stop a car from switching ends add a vertical fin from about the middle to the rear of the car. Formula one and Le Man's cars have used them for that purpose. 🙂👍

Nice paint booth 😂

I nearly fell asleep when you just spoke normal 🤣🤣🤣 BOOM that better, shout 👌🏻

You need to put battery's, and everything in, and look closely when you lift the front to make sure both come off the ground at the same time, repeat for rear, then recheck front, and rear again. Run the less tow in in the rear, and zero tow in front, about 1/2degree or negative cambor in front. Center trim check how it drives, and adjust mechanically to straighten if it veers too much, electronically if it's not bad. This has worked for me pretty good.

Agree with you kev, Air to air is very popular here in Orkney and Shetland, it's more efficient and much cheaper than air to water for heating, plus you also have cooling and it filters your air, I have it in my house, dirt cheap to run, The rest of the country it's like it pretty much doesn't exist

Kev i've been having the same issue when trying to speed run a modified WLToys. I even put a gyro in it. My next move is to increase the WT in the rear diffs and see if that works.

'Paint booth' OMG your killing me 🤣🤣🤣

The mobile paint booth 😂😂👍👍

You must be the only guy who's real car collection consists of a monster truck, Lamborghini.....and a Rover?! 😂😂😂😂😂😂 Love it

I got a 13000BTU unit, that day it was 40c you wouldn't have never even known it was summer outside in my home lol

Love your channel bud my Wltoys 104002 has gone 84 mph it will do 90 mph this weekend straight as an arrow glad to help you figure it out you can check it on H and W rc racing channel theses car are very picky but once there set there a dream to speed run almost no steering

love your spray boothe 🤣🤣🤣🤣

I love the paint booth lol heated with filtered air even lol

The paint booth!!!!!🤣🤣🤣🤣🤣🤣🤣🤣🤣

I would ask around for racing setups. Also, it takes a alot of practice and trial to find a setup that works for you. But at the end, consistency is paramount in racing.

❤💕💖 WaFFle WAffLE WaffLE! 🤪😜 Tires 👍 You Most definitely got the Right Stuff Kevin! Your Positive Energy is always uplifting and inspiring and always puts a smile on my face 👍💕

love that ur paint booth is ur rover haha

I truly like when Kev goes. BOOOOOOMMMM.

Awww the poor Rover-gini is a paint booth now. 😂

I like to keep a few different rolls of tape around the different sizes inside the roll of tape some of them are perfect for gluing tires you take the tape roll and push it down around the edge of the tire and it holds the tire down around the whole bead while you put the glue on the inside then you just let go of the roll of tape and the tire snaps back around the whole bead

Love the paint booth 😂

Dude your paint both 😂is awesome!

I added a mini split in my garage. Best investment ever!

with that car always swapping ends, tow in on the rear can cause the rear to be loose. maybe try having the rear dead with no tow. If you haven't tried changing the front end, tow in should make the front steer less and keep it going straight. might work, worth a try

Makes me think of little Rabbits🐇 hopping along chasing one another...🤣🤣 Hopalong Cassidy😂 to mutch power for those little cars. Dial it down a little bit and maybe it'll take the corners better..

The paint booth ! I’m ☠️🤣

Kev! On your sosige rc car you should try band the tyres on those aluminium rims with metal ties. They are stuuupidely strong and i guearantee they will hold the tyres on the rims and combined with glue... think were onto something!

Kev. Check the difs on the Project 100mph car. If the front and rear tyres are doing a slightly different speed it will never go in a straight line. Maybe refurb the difs and make sure they have the same grease in each.

Kevin... I had a thought .... For your 100 mph buggy. It you were to find a way to get a set of wheels that have some OFFSET... That way the wheels sit inside more.. meaning a smaller gap between the front tires... Make the front as much skinnier than the back.. as possible... With some offset wheels it is possible.. That SHOULD help.. SHOULD... but that's not guaranteed obviously.. It should theoretically though

Value packed episode, T.I.T.S. this week. Thanks Kev!

Try using gel super glue takes a lil longer to dry. You can control the flow better and use a little isopropyl alcohol, after it drys to remove any excess glue but there's not going to be a lot unless you use a lot. If you try it let me know what you think. 🤙

Love the paint booth

‼️ 100Mph cheap WL toys. Try gripper lower shore value tires. Make sure that the front and back tire diameters are the same (to make sure the rears do not over run the front). Lastly a little wider rear may help. 🔥💪🏻

The best (and cleanest) way to glue tires is to buy them pre-glued like I do! 😂

Tire wheel boooooooom! Perfection! Keep “shouting” we love you!

Paint booth HAHAHA terrific!

i reckon you should run open diffs with oil in the project 100 mile an hour car instead of the silicone earplug to gain more rear traction

Get yourself some Bob Smith industries tire glue. Awesome needle thin tip and medium flow. Works great, no mess!

Lmao, the paint room! 🤣🤣🤣🤣🤣

Your suspension looks like it's squatting on the right side when you put it down on the track as well like you have less shock oil, bad shock oil, different grade of shock oil or bad shock oil. The springs or the setup of the springs could be out as well.

“The paint booth”. Too funny

Kev the cheap 100mph car has to much positive camber if its spinning like you stated. Setting the wheels with negative camber helps compensate for the camber change while cornering. Try front toe straight as possible & rear toe both in about 3/4 degrees. adding a few degrees of toe-in will take some of the edge off of steering response but.. will improve on the straights 👍

Good thing with scroll zone HVAC System, Kevin. I hope your energy bills in the UK are to be 'affordable' this winter. Maybe a home built drone to fly into the maniacs Dacha?

Love the paint booth Kev 👍😅

I've switched to the thicker gel like glue for tires. Easier to control it, while the thinner glues run out everywhere like water.

Hahahaha awesome paint booth!

How many RC cars do you have? Kev; yes.

Tire sauce, helps with grip alot and you can get stuff for foam

Tow out with more camber out 3degrees at least.. it looks dumb but it will run str8er.. works on erevo..vxl 6s brushless .. Crazy yeah racing.. 😜

Toe and camber is really powerful to use for front grip

Hi Kev, Maybe 100mph car is trying to spin because Gyro is working in the opposite way. You can switch compensation direction by double clicking receiver button (while car is on). Good luck:)

Damn, Greta was on one in this vid! Also agree on air con, 3 years ago I couldnt work from my work shop at home and decided to get an aircon unit, best thing I ever bought.

The paint booth 😂😂😂

i would love to see you get a trx4 mini when they come out and i want to know if it is any good. keep up the good work kev.

The wl shorter shocks & stiffer will help it & maybe a diff wing without the drag ive seen people just take it off or trim out back middle

What in the world painting on cardboard in the car. That was hilarious 😆

This is just an idea but your cheap fast rc might be swapping ends because the rear tires are expanding at speed more than the front tires. The larger diameter causes the rears to over speed the fronts and thus wants to swap ends. Try using the same sized tires (tyres on your side of the pond) on the front so that they all stay the same diameter when they expand. I think you or Raz tried to gear the fronts on one of your cars to “pull” the car along. You could also try putting the tires on front to back and see if it still does it. Rear on fronts and fronts on rear.

“In the paint booth” 😅😂