Which Big Brake Kit should you get for your WRX?

Рет қаралды 3,443

Күн бұрын

GIVEAWAY LINK: woorise.com/heavymetalwrx/cob...
Links to BBKs:
OEM STI with OEM style rotors - $4599
www.fastwrx.com/products/suba...
4 pot rotora with rotors - $3875
subimods.com/products/rotora-...
6 pot rotora with rotors - $5869
subimods.com/products/rotora-...
Tdmi 4 piston with rotors - $3200ish
felixperformance.com/collecti...
JDMuscle 6 pots I built - $3000?
jdmuscleusa.com/products/jdmu...
There are so many options when it comes to brake kits. The prices also fluctuate. This is why i have listed some options for brake kits here. I think its important to understand exactly what you will get out of this if you spend thousands of dollars. Some people just need new pads for their WRX. Some people could use
Disclaimer: I am the owner and creator of all the music in this video.
!! MODS LIST !!
Use code 'heavymetalwrx' for discounts at Perrin, Aeroflow Dynamics and Diode Dynamics.
Performance:
Perrin Intake
Perrin Turbo inlet
Perrin diverter valve
Perrin Front mount intercooler
Custom fab jpipe and catback from Invidia and MAPerformance
Perrin Super Shifter Stop
Cosmetics:
Noble Big bulge hood scoop
Noble STI Oem lip
Noble STI oem style spats
Noble CS grill
JDMuscle Amuga Style Grill
JDMuscle Mirror caps
JDMuscle rear diffuser
Aeroflow Dynamics OEM style duckbill
Ebay side skirts
Cosmis Racing XT-206R
Diode Dynamics Tail as turnlight
Noble Blue side mirrors with turn lights

Пікірлер: 70

@CruelUnknown 2 ай бұрын

I'd put 5k into an sti trans rather than the 6pot/4pot brakes.

@mistamaog 2 ай бұрын

Would that cover installation too? 🤔

@bobsmith-qz2pv Ай бұрын

@@mistamaogI was quoted $8,000 for turn key STI swap

@pripley 2 ай бұрын

Thanks for addressing the elephant in the room, which is I think "do you actually have the need for high-performance brakes." We would all love 6-piston Brembos up front, but the reality is they would not make a difference during normal driving conditions, not more than different pads would. It's about heat build up and dispersion under continuous braking, at the track, or outrunning the police, whatever your 'special' application may be!

@timeout9851 2 ай бұрын

I agree buy big breakers if needed, or if you have the spare cash (I’d buy if had spare cash) I drive my 310bhp vb on road only at this stage and drive it pretty spiritedly , so far the standard breaks have been absolutely fine…

@betancourtl 2 ай бұрын

Good timing on the video, just got my car tuned at Felix Performance. I can go fast now, but I didn't think I would need something to slow me down. Upgraded to Hawk 5.0 pads and that helped a bit.

@seanrmccoy 2 ай бұрын

TDMI has both 4-piston and 6-piston options for the VB. I have the 4-piston option on the front of my GT and they’re pretty great. Stock pads are pretty good, and held up to some pretty heavy abuse up in the mountains a few weeks ago. Though I did use up a ton of the street pads doing it. I’ll be testing out their “track” pads when I go up again.

@subterraneanguitartech 2 ай бұрын

Quality content here! Your discussion at the end about realistically justifying big brakes is so important. Ultimately that is why i bought a Limited over the TR...also looking at the eventual replacement cost for those rotors/pads 😵 I'll just powder coat the stock calipers for aesthetics...there are so many more fun, important, and affordable upgrades in the meantime.

@ROROSWRX 2 ай бұрын

I got myself the TDMI BBK (neon yellow) for my 22 VB WRX and it is definitely worth it!

@randomquickness 2 ай бұрын

Good info, if I were to go back and do mine all over again, I'd do the same thing. IMO the best bang for buck is either of the VA setups but with correct offset rotors like DBA or Paragon. If you don't want to trim dust shields, just use the shields from the corresponding VA.

@eliezergutierrez2472 2 ай бұрын

I just bought the front 15-17 oem Sti brembos, just the fronts for $400 which in my opinion is plenty for me and most people since most of the breaking comes from the front. I have a 19 base wrx and the 15-17 Sti front brembos are a direct bolt on only thing you need to do is get the mounting bolts, brake pads, and rotors for the Sti. All in just for the fronts you are probably at 800$ maybe more but still under 1k.

@raymullen8427 2 ай бұрын

If you're having caliper problems. Check to see if the slides moving freely. Then Try taking out the slides cleaning them out and putting fresh grease in there. Especially if it got hot. It's worth a try.

@bryanallendorf7064 2 ай бұрын

Another great video.

@OilyWRX 2 ай бұрын

I agree with Awais. BBK option for the VB’s that aren’t a TR are kinda pricey. That’s considering if you want to push the car further than 400 WHP. That money can go towards a 15+ STI transmission. Don’t get me wrong you need to brake with more power and I’d recommend stainless steel lines, pads, dot 4 fluid, and rotors before going full BBK especially for a daily. If you have the money to throw away and don’t care about the cost at all then, a BBK would be an option for you.

@Laphoot 2 ай бұрын

CTS (GM brembo) brakes,

@waybach 18 күн бұрын

Yup I’m going this route. They have a good deal for brand new calipers and brake pads, I had to scoop up a set bc of the price! Will just be doing an 2017 STI rep for the rear w/ the heat/dust shield

@SavageBluetick 2 ай бұрын

Good vid as always. Ive racked my brain for countless hours looking for a BBK setup thats affordable-ish and an all in one setup. I dont want to have to go find random cadillac calipers and one off rotors and some other sourced brackets etc. That said im not happy with stock brake performance. Its the one thing about this car Ive been disapointed with and frankly scares me.

@Lunatic_Lou 2 ай бұрын

TR has a different master cylinder where the aftermarket are probably built for what the car came with.

@KrayonTheKreator 2 ай бұрын

Ya I've been looking at thr alcon break kit fir the time being I have my OEM calipers painted, not planing on upgrading until these are near shot basically.

@E-Dog707 Ай бұрын

I got the 6 piston Alcon kit with race pads for my VB- I had initial issues bedding them in, I may try a lower friction pad for street use. Unless you are tracking the car, I'd stick with stock. Change the rubber lines to braided, and change the fluid to Dot 4 RBF 600. Use Titanium pad shims. I've used stock brakes at Sonoma raceway and Laguna Seca, they work great and didn't really ever fade, but do get hot and wear out quickly, so have spare pads handy. I've also used EBC reds on DBA slotted and drilled rotors, great for street, but those faded out within 3 hard laps at the track.

@E-Dog707 Ай бұрын

Oh and you need at least a 3mm spacer for the stock rims to fit over the Alcon brakes- I use a 5mm spacer with stock rims. This means you also need to get longer wheel studs and new lug nuts to be safe. The stock wheel studs are very short, and the lug nuts won't have enough thread bite when using spacers.

@chrischarles9218 2 ай бұрын

I was looking at the brake part options at Rock Auto. They are no Brembos but they do have some name brand upgraded rotors and pads available. As AWFUL as the stock pads are I'm sure a premium auto parts store brand will work much better. Might be a good option for your average weekend warrior.

@jrock-xs9vp Ай бұрын

Them stock pads sucks on my 22 wrx .Wish they would have at least put better pads on it. Thanks for your video

@Nonx47 2 ай бұрын

I was just thinking about this yesterday. So many options and not my realm of expertise.

@yankpr1 2 ай бұрын

So at this price point, I think it’s best to get the TR you’ll get the seats and the bravo no sunroof, but he’ll it’ll feel better and no chances

@lacoupe5088 2 ай бұрын

I think the option is if you already have a VB WRX. I bought mine in early 2023 for dirt cheap. Selling it for a TR is not an option for me because I would take a substantial loss.

@waybach 18 күн бұрын

Spend $1500 and you can get brand new FRONT: Cadillac Brembo Calipers for the front,rotors, pads, lines, with the conversion kit (pre-orders coming soon for VB’s), REAR: 2017 STI caliper (reps) , 2017 rear brake shields, All rotors, brake pads, brake lines and hardwares! This would be a great series you can do and I don’t see not but 2 others with VB’s doing this conversion. Shouts out to: @Subi_doo

@kevink.8048 2 ай бұрын

Ok for those of us building a upgraded daily that wont see a track etc. Can any confirm if the DBA 16-22 WRX (w/Eyesight Technology) XP Performance Rear Brake Pads | DB2398XP is for the eyesight models? Seem impossible to find rear pads for eyesight models.

@Acrimoniousbear1 2 ай бұрын

Your brake pad uneven wear could likely be due to Vehicle Dynamic Control (VDC). Since the wrx does not have LSD they use VDC as a cost saving way to achieve the same goal. It uses the brakes to slow the inner wheel on a turn to make the car rotate better. This I creases brake wear obviously. If your on a course that turns left more than right then your left rear brake will be more worn then everybody else on the car lol. Id blame this for your wear.

@the_real_treezus 2 ай бұрын

Getting ready to do 17 STI 4/2 pot on my 2020 WRX. calipers, rotors, pads, lines, fluid, bolts. All in all comes to about $1500. With a DIY powder coat job on the calipers it should come out looking and feeling pretty great.

@mistamaog 6 күн бұрын

How'd it come out?

@the_real_treezus 6 күн бұрын

@mistamaog i ended up painting them and wasn't able to swap the lines but everything has been rock solid for about a month now.

@mistamaog 6 күн бұрын

@@the_real_treezus Nice, did you have any clearance issues?

@the_real_treezus 6 күн бұрын

@@mistamaog not at all

@RuntyOwl8 2 ай бұрын

Should have mentioned the 4/2 pot STI brakes from the 04-17 sti!! I believe if done sprucely, they're just shy of $2500

@RuntyOwl8 2 ай бұрын

My goodness, should've watched the whole video lmao. I think by going with rockauto and doing some work by yourself you can still save a bit of money on the 4/2 pot sti rotors

@br8y693 2 ай бұрын

The thing that will be nice about getting a tr is the brakes will be under warranty

@inactivemogul403 2 ай бұрын

Probably not the pads though. Pads will be expensive if you don’t diy

@br8y693 2 ай бұрын

@@inactivemogul403 right

@Drayden42 2 ай бұрын

I wanted to add a Brembo kit to my VB until I saw the price. Now I'm thinking EBC reds or something along those lines, lol.

@E-Dog707 Ай бұрын

Reds are good for street driving, but not for high speed track use. I used Reds on DBA rotors at Laguna sea and the EBC red brakes faded within three laps. I'm using the Alcon front BBK now, with EBC yellow in the rear.

@miket883 2 ай бұрын

In your video, you mentioned that in addition to the list of parts shown in the Subaru quote, you will also need to get new knuckles. I looked up the knuckle part number for the 2024 TR and there are actually two of them. One part number says it will fit only the 2024 TR and the other part number says it will fit all trim levels of WRX from 2022 through 2024, including the TR. Maybe it’s just a misprint on the Subaru parts site, but can you check for sure if a new knuckle is really needed? Mike

@HeavyMetalWRX 2 ай бұрын

Someone on Facebook heard that from the Subaru tech. Tbh I have no way to confirm unless someone actually does this kit. I'll see if I can find out from Subaru. Maybe when I hit up my dealer soon.

@miket883 Ай бұрын

Confirmed with the Subaru parts dept at my dealer that only the front knuckles are different for the 2024 TR. While the knuckles are available to order, the 2024 TR front Brembo calipers are showing up in the Subaru part database as “not available” (yet). There is no ETA as to when they will be available to order.

@ReinierAlansalon 2 ай бұрын

As someone who went with 2008-2017 STI 4/2 pot with DBA rotors (5000 2pc fronts and 4000 rears), be very aware your wheel choice is limited to ones with extremely high brake clearance. The top hat of the front rotor significantly sinks the wheel in so many wheels that would clear the older STIs actually hit. I went through three sets of wheels test fitting and they did not clear.

@unclelive6918 2 ай бұрын

Tr brake is bigger than last gen sti ? Wow

@ReinierAlansalon 2 ай бұрын

@@unclelive6918 TR is exactly the same as 18-21 STI.

@realrocktimusprime 2 ай бұрын

I want the new turn signal stock/system that has a regular turn signal...not the BMW BS.

@francogiorgi9010 2 ай бұрын

Hi, if I use my wrx normal, everyday drive and not racing on weekends. The stock brakes are more then adequate?

@HeavyMetalWRX 2 ай бұрын

100% adequate for daily use. A lot of people do find the brakes to be a little mushy. What you can do is next time you change the pads just get something slightly better. Id say even the carbon ones from duralast or rock auto would be better than OEM pads for the future.

@francogiorgi9010 2 ай бұрын

Thanks

@beaches2mountains230 2 ай бұрын

HEY AWAIS !! IS THERE ANY WAYS TO ENTER YOIR GIVEAWAY IF WE ARENT ON ANY SOCIALS ? I SWORE OFF SOCIAL MEDIA (EXCEPT YT) YEARS AGO. FOR YOU I MAY HAVE TO TEMPORARILY MAKES ACCOUNTS

@HeavyMetalWRX 2 ай бұрын

Yea man just click the links and then come back to the site and enter your info.

@xtrekrex 18 күн бұрын

90% of people don’t even need BBKs. If you’re at a track with high speed straights and also lapping a lot more than usual, then yeah the extra heat dissipation from BBKs will be worth it.

@Danything123 5 күн бұрын

100% of people do not need a wrx while we can all just drive a cheap car to get from point A to B.

@xtrekrex 5 күн бұрын

@@Danything123 and those 100% of people can also ride bicycles and walk to places. Point valid 👍

@Danything123 4 күн бұрын

@@xtrekrex right? 😄

@awesomedude65 2 ай бұрын

Kinda ironic that this video comes out just when im in the market for a new brake kit, the factory brakes are just awful

@betancourtl 2 ай бұрын

New pads helped. Stock pads are just awful.

@awesomedude65 2 ай бұрын

@@betancourtl I tried ordering EBC redstuff but they out of order

@waybach 18 күн бұрын

Get some GM brembos and piece the parts. Not hard takes a little time but the parts are all out there and you’ll be saving 50-60% the cost

@jasonpeck4444 2 ай бұрын

This car should have come like the GR Corolla with a standard 4/2 set up straight from the factory. I appreciate Subaru trying to keep the car affordable, but she’s running close to 300 hp and every other car in the class (GTI, GR Corolla, etc.) has better brakes

@HeavyMetalWRX 2 ай бұрын

The GR starts at 36k though. You can still get a base WRX for 32k. Plus the GR model you'd get would be a premium. Because it comes with the torsen LSDs. The base Corolla isn't worth it imo.

@jmtcol5280 2 ай бұрын

Maaaan. I dont think I'll ever spend this amount to upgrade my VB brakes with these options for the same reason. Way too much to justify IMO. I dont see myself ever spending over 2k. I just won't. Thanks for the awesome video as always, and great information. A new video just came out for the ctsv swap with parts. Possibly more affordable with GM brembos? Hmmm. Gonna wait and see. 🤞🏼🤞🏼

@HeavyMetalWRX 2 ай бұрын

I hear a lot about the GM and the Cadillac brembo's They seem like a really good option You just have to source all the individual pieces together I think I will put a video together for that soon.

@jmtcol5280 2 ай бұрын

@HeavyMetalWRX Hell yeah, I think I'm gonna go that route. I was just watching and going over Subidoos videos. Looks like it will be a great upgrade for the price. Gonna get some track days this summer, so I need to upgrade. I'm stoked to see your video, man. The kit isn't quite available yet, but I'm gonna snag once it is. 🤘🏻