Whirlpool Washer Won't Spin - How to Test and Fix

Рет қаралды 614,936

Күн бұрын

Today's machine is a Whirlpool Washer. If yours doesn't want to spin during operation, let's go through quite a few ideas to test components and fix your washing machines' issues.
In this video, you'll learn where to find your technician's manual, what the error codes mean, and which ones relate to the spin mode on this Whirlpool washing machine. I'll also show you how to force-test the spin and agitate modes to see if the machine really can spin, or if a part has truly failed. We'll also take a look at the components underneath, what they do, and how they could have caused the spin failure on the machine. The video is long, but I tried to be pretty extensive on the fixes.
Part Links That May Fix Your Washer:
Whirlpool Shift Actuator (Black or Red): bit.ly/3eMD4BK
Washer Hub: bit.ly/3zoWhB8
Lid Lock (Maroon/Red Color): bit.ly/2W9m2qJ
Lid Lock (Black, new style): bens-appliances.com/products/...
Other Parts: bit.ly/3xtWbtK
Need the manual, tech sheet, schematics and more? This is the company I use to buy all my manuals from: appliancetechmanuals.com?aff=BensAppliances
Chapters and Timeline:
00:00 - Introduction / Description of Washer Not Spinning
00:47 - How to Find the Whirlpool Washer Tech Manual and Washer Top
02:40 - How to Find Whirlpool Washer Error Codes and Enter Diagnostic Mode
04:10 - Whirlpool Washing Machine Error Codes
06:05 - Testing the Washer Basket and Agitator or Impeller
07:25 - Forcing the Whirlpool Washer into Spin Mode via Manual Mode
08:23 - Warning About Performing Manual Spin Tests
12:31 - How to Get to Parts Under Washer
13:48 - Whirlpool Washer Belt, Motor, Splutch Assembly, Shift Actuator, and Capacitor Locations
16:30 - How to Test a Shift Actuator Motor + Other Parts Testing
Tools I use in all videos can be found at my Amazon Idea Page: www.amazon.com/shop/bensappli...
Did this video help you out? Send me a tip, and help me make more Appliance Repair videos for people to watch for free!
PayPal: paypal.me/BensappliancesYT?lo...
CashApp: $BenjaminSchlichter
Affiliate Disclosure Form: bit.ly/3oXeu3B
** Links to external websites and parts may result in me receiving a commission on sales.

Пікірлер: 367

@nancykampscook5196 10 ай бұрын

As a former washer tech, I find your video the best I’ve found on You tube. You are a valuable asset to the public! Thanks! I will continue to watch your videos in the future😁

@nataliew.g.5816 6 ай бұрын

Sir. You are EXACTLY what the internet inventors had in mind for it's purpose. You are a necessity. Thanks for sharing your knowledge!!!

@BillMurry-xx5so 4 ай бұрын

You mean they didn't invent the internet for free porn.

@accidentallyuseful Жыл бұрын

This is a superior tutorial, worth watching all the way through. He explains valuable info I didn't even know I needed to know.

@bert5959ify Жыл бұрын

You have saved my hair loss issues. Lol. I stopped repairing appliances about 15 years ago due to family and new job. Just starting to get back into it and with the addition of electronics, I’ve spent hours scratching my head with various issues that are in this video. I have a stack of these machines in my shop waiting for repairs so I can resell them. I can literally get 5 to 10 a week where people have tossed them. Now, thanks to you I can do the proper diagnostics instead of doing the old parts change and see method. I can’t tell you how much I appreciate this video. I’m sure you put a lot of thought and effort in it. Thank you a million times.

@speaklifegardenhomesteadpe8783 Жыл бұрын

Awesome! I pray your business goes great! You could also help answer questions in the comments here! They should make it where you can tip comments. ❤😊❤

@BillMurry-xx5so 4 ай бұрын

Remember, back in the day, you just press start and stuff worked.

@JoshOsterbuhr-mr8nh Жыл бұрын

You sir are a hero and a life saver!!! Watched your videos on whirlpool washing machine and was able to diagnose/find the problem. $40 fix compared to $300 for someone to come look at it

@billdance8815 Жыл бұрын

Well done tutorial, one of the best instructional videos I have seen. Thanks!

@TheRancher03 Жыл бұрын

Definitely the best detailed diagnostics video on Whirlpool washer

@garyvanrheenen181 Жыл бұрын

Your videos have been very helpful, thank you very much. My shift actuator is shot, just ordered a new one from you. Without your videos I would not have known what to do, thank-you.

@treylem3 Жыл бұрын

👍

@jacobschmidlkofer295 8 ай бұрын

In 20 minutes I went from hating my washing machine to being excited about diagnostic and manual mode. Thank you for pulling back the veil

@kristinwolfe9726 Жыл бұрын

Super thorough and so easy to follow!!!! Fantastic tutorial!!!!

@oooops537 9 ай бұрын

2:40 Thank you Ben!! I'm a little old lady but this worked perfectly to get my washer going again. xoxoxo SO APPREciated! Thank you!

@jojolivares7 Жыл бұрын

Thank you so much for the information you share in your videos, you saved me a lot of money and time, now my washer it’s working like new!

@jonbehert 2 ай бұрын

You deserve a noble peace medal. Thanks you

@kevinklimovich125 2 жыл бұрын

Your videos helped me tremendously. Saved a whole bunch of money fixing my washer. Thank you so much!

@treylem3 Жыл бұрын

🎯👍

@MrHanowski Жыл бұрын

Well done. The service manual can be reached from underneath without removing the top. The lid lock latch can be removed from the lid and inserted into the lock so you can open the lid to see what is happening. Safer doing it this way vs having the top tipped back. Overall, very good video. Best I've seen. The Tech Sheet shows power to the shifter motor is Pin 3 and Pin 6 for the black shifter, like you said. But the way you are holding it, those pins are on the opposite side that you tested for motor continuity. Note that pin numbers are molded into the male connector.

@mmforeman 11 ай бұрын

No pin numbers on my machine -- male or female

@ac.7724 Жыл бұрын

This is a very helpful and easy to understand video. Why would they hide the manual like that? Here's a tip for washing machine dummies like me. If your washer has stopped spinning, take the wet clothes out first! When I finally did that it turned out a long sleeve had gotten wrapped around the thing in the middle and was stuck, causing it not to spin. Once I managed to get the sleeve unstuck the machine was able to spin again. I felt so stupid for not checking that first! .

@Gatorlips2 Жыл бұрын

@nelsongomez1807 Жыл бұрын

Your videos are very helpful. Very well explained. Thank you. Keep this energy up.

@bensappliancesandjunk Жыл бұрын

Thanks!

@jmzercher Жыл бұрын

sir you have fixed my washer.. I have this model without the agitator.. from finding the manual to running diagnostics this video led to replacing the actuator which fixed the issue, I didn't even need the manual thanks to your understandable how to.. part for $25 and two hours total and it's gold! thanks so much..

@__WJK__ Ай бұрын

Aweseome! So what was the washer doing/not doing before you replaced the shifter-actuator(?)

@bigfoot8203 Жыл бұрын

It's a shame they took a good washing machines that work good for years without a bit of problem, put computers in them and don't wash half as good

@adelinavillegas2210 7 ай бұрын

I agree with you. We have had nothing but problems with piece of...

@kevreilly7 5 ай бұрын

Aint globalism grand??

@thewuwu 4 ай бұрын

Profit over everything

@robertwilson3275 3 ай бұрын

I know I buy the older kind.. they are easy to fix!!

@caltrim1 2 ай бұрын

Yep

@mattg3829 Жыл бұрын

Excellent video. You helped me out tonight! Washer fixed in 5 minutes thanks to you.

@dfusa4869 11 ай бұрын

What was wrong

@albertlanger2339 2 жыл бұрын

Brilliant video. I thank you for adding to my knowledge.

@thepopo2323 Жыл бұрын

This video save the day, thanks a lot. Really helpful!

@jackwilley7340 2 жыл бұрын

Following your instructions I was able to get into the diagnostic mode. I then did the reset. The washer went into the spin cycle and ran for about 10 minutes. It was noisier than usual and made me think that maybe I hadn't tighten something good enough. Anyway it did spin so I think I can assume the motor is OK. Thanks again for the great videos.

@shadowopsairman1583 2 жыл бұрын

Roaring, could be the gearbox

@jroysdon Жыл бұрын

Thanks so much! Using your video I went from knowing nothing about how my washer worked to being able to diagnose the failure of the washing tub's ability to spin. I removed the washer hub and found that the spines were completely worn away. I ordered a replacement from Ben's Appliances and Junk and it worked perfectly. After installing and recalibrating, I put it back into test mode and tried the high spin, and WHIIIIIRL! It spins so fast now.

@DonaldWells-wk8dc 8 ай бұрын

That's has Ben's junk now.

@senpai16 7 ай бұрын

This I think will definitely be helpful for me! Thanks you for your detailed work!

@jaybranch2358 Жыл бұрын

Thank you for the tutorial. Very helpful!

@anthonylagreca6858 Жыл бұрын

This is someone I would trust to make the problem go away.

@trollolololol1079 Жыл бұрын

So this video is super helpful. But before you take your machine apart like I did, check your drain hose. My washer was just fine after I unclogged the hose. Some spinning issues, turns out, come from improper drainage. Works like a champ now. This video is definitely a $$$ saver if you have a piece that has broken

@MikesGarage96 Жыл бұрын

Thank you for this video! I have this washer and having problems with mine spinning and making awful noises

@jackwilley7340 2 жыл бұрын

My Maytag washer is about 3 years old. I replaced the clutch assembly and the actuator. It still won't go into the spin cycle. I did not reset the washer. I will try to now. I am working on the diagnostics. What a great video! Jack Willey

@shadowopsairman1583 2 жыл бұрын

Capacitor check, motor or main board

@billbrock5486 2 жыл бұрын

Great video! Thank you!

@julianperez8749 Жыл бұрын

Thank you sir for showing this video how to fix the problem. My washer is fixed now 👍🏽. 2022

@justinjohnson2378 3 ай бұрын

Hey your video got me farther then any other video on Whirlpool washers Iam right in the middle of fixing my washer I had to change lid lock and actuator… you explained things so calm and easy I appreciate you bro more then u could imagine at the moment 😂

@__WJK__ Ай бұрын

What was the washer doing/not doing, before you replaced the lid lock and actuator?

@BoricuaGirl69 Жыл бұрын

Thank you so much. I was able to fix my washer that wasn’t spinning. 👍🏼

@waltercardenas7354 Жыл бұрын

What part did you change to get it to spin? Thank you

@BoricuaGirl69 Жыл бұрын

@@waltercardenas7354 didn’t change anything. I followed his instructions when he pushed the top of the spinner several times up and down then followed the dial reset instructions and put the dial on spin. It started to spin and empty the water. Maybe it was just luck but I was about to call a mechanic 👍🏼🙌🏼

@Yosoytuupapa Жыл бұрын

I replaced my clutch pack assembly and shift actuator, it’s working well but now it’s squeeky when spinning, Did I have to add grease or lube?

@aaronbinder6903 3 ай бұрын

Wow what a great video!! Thank you so much for taking the time to make all these videos. Now maybe I can figure out why my Whirlpool Washer isn't spinning.

@shannonkirby7040 3 ай бұрын

Same here, mine gets to rinse and spin and don’t engage

@__WJK__ Ай бұрын

Anyone find a fix for the no-spin issue?

@Vaughnbrad Жыл бұрын

Great tutorial. Thanks!

@BriceGrimes-rd2pm 4 ай бұрын

Really appreciate the video and all the help I got from it thank you

@leannab5785 3 ай бұрын

Great video, thanks for posting!

@carolynbrown4028 11 ай бұрын

Thank you, kind sir. You have just saved my marriage.

@clarencewilliams7207 11 ай бұрын

Great informative video saved me money 💰

@annetteekeroth 2 жыл бұрын

Ben, you're an angel! Keep on with these great instructional videos. Are new commercial machines as seen in laundromats as finicky?

@bensappliancesandjunk 2 жыл бұрын

No, they're great and built to last. Still will have issues with, say, bad, non-HE detergent but nothing too far difficult.

@speaklifegardenhomesteadpe8783 Жыл бұрын

@@bensappliancesandjunk do you make house calls about an hour from you?

@bensappliancesandjunk Жыл бұрын

@@speaklifegardenhomesteadpe8783 unfortunately we do not at this time

@alexsamour5248 6 ай бұрын

Amazing video! Thank you.

@roastedpudding7655 3 ай бұрын

This helped me fix my parents washer. The shifting actuator was bad, and i replaced it. Thanks alot!!!

@__WJK__ Ай бұрын

Interesting, so what was the actual issue with the washer, that the shift actuator fixed?

@bgregg55 9 ай бұрын

I'm hanging on to my pre-circuit board appliances as long as I can since I almost never need to fix them.

@BillMurry-xx5so 4 ай бұрын

😂 the good old days. When you plug it in and push start and it works.

@jimabraham6382 2 жыл бұрын

Great Video. shift Actuator no ohms. Replaced.

@allenvasher5358 11 ай бұрын

Help. Very helpful, I used this video to determine that it the shifter needed replacing, now a month later I am getting an F5E3 LID UNLOCK FAULT & F7E5 SHIFTER FAULT code.

@bensappliancesandjunk 11 ай бұрын

Did you recalibrate the shifter? Otherwise, sounds like a lid lock issue. I'd at a minimum recalibrate it immediately.

@allenvasher5358 10 ай бұрын

@@bensappliancesandjunk we had a flood a week before, it turns out that we had a that the motor corroded, the shifter corroded & the capacitor went bad. It was going to take a week to get all the parts, & cost $400. Found the same model @ lowes, (labor day sale) delivered the next day for $509.

@ralphlapolla3308 10 ай бұрын

Hi and thank you so much for this video, I've tested and tried everything on my whirlpool to get it to wash/spin. The shifter tested good, the capacitor tested ok, my washer will make the sound like it wants to start washing/spinning but will go really slow then nothing. I'm thinking it's the capacitor but any feedback would be greatly appreciated thanks, oh and the motor/ transmission spin freely and belt was good.

@adrianj8370 2 жыл бұрын

Check for micro farads on the capacitor the plastic casing normally will tell you the range that it should be at. It will provide a more accurate test.

@Tetelestai-xp8kn Жыл бұрын

Hi Ben and thanks for an excellent video. I have the same model you are working on. My issue is that it is not agitating. Everything else works fine but agitation is not working. It looks like it wants to work. I have tried manually and it feels very loose and the bolt that holds the agitator is very tightened. What do you think could be the problem?

@anthonydejuliis224 10 ай бұрын

Well done !

@USSHammerology Жыл бұрын

I like my plain ole estate by whirlpool washer. No fancy diagnostics. Just straight forward old tech.

@CF-xv9iy 9 ай бұрын

Saved my A$$ today man , thanks a million for making these vids

@nikolayignatiev375 8 ай бұрын

Thank you Ben.

@stef1277 4 ай бұрын

I just want to know how to get my Whirlpool non agitator washing machine to drain and spin WITHOUT adding more freaking water. I pick drain and spin, it IMMEDIATELY starts adding water. It’s so frustrating. Just spin like the old washers used to!!

@crimro85 4 ай бұрын

Right I don't understand that either.. dumb

@essiekaayy8755 3 ай бұрын

This is my current issue. It will eventually drain all water just will not SPIN

@Solomerc17 3 ай бұрын

That’s what the error codes are for.

@lorenbaisden1019 Жыл бұрын

This was very helpful. Thank you for the help.

@jo-annewilson3670 2 жыл бұрын

My Maytag top loading Bravo series washer is about 7 years old and has been a good machine. In the past year we have been having trouble with the door lock, now all the time it says DL.

@royabreu3627 2 жыл бұрын

Good and complete video body thx a lot

@bensappliancesandjunk 2 жыл бұрын

Thank you too

@coviedogs Жыл бұрын

Wow great instructionsl video. I tried to wash a coiple of pillows and faulted my washer. Fixed now! Thank you!

@2lobstersinapot Жыл бұрын

I did the same! Stupid pillows! Was it the actuator?

@coviedogs 11 ай бұрын

@kidkaras whatever it was, sadly it won't spin now and keeps faulting, so I have to do a deeper dive. I did the spin test and it did spin. But I stopped there, took out the pillows and still not able to spin

@2lobstersinapot 11 ай бұрын

thank you for your reply! I just ordered the actuator. Mine goes through the whole wash cycle but won't spin. ill find out Thursday if that the issue.@@coviedogs

@coviedogs 11 ай бұрын

@kidkaras i hope it does! It would be great to hear back from you too! Thanks!

@2lobstersinapot 11 ай бұрын

@coviedogs it was the actuator! I ordered the part from walmart, and it said factory part, whereas Amazon had knockoffs with people complaining the part died after a month. I think it cost 35.00. With return option. My machine would go through the whole cycle drain but not spin. The actuator solved it. Also, remember to re calabrate the machine to recognize the new part. The above video is excellent. Good luck!

@jackwilley7340 2 жыл бұрын

Thanks!

@Diane-xh7vl 11 ай бұрын

I bought this washer for $250 like 4 or 5 yrs ago still runs great as this was new when I got it. Can't find no washer for this price no more😁

@kevinkotchevar2339 3 ай бұрын

Nice hack job on the wireing!!

@Denver_____ 2 жыл бұрын

The uniform is a nice touch

@jaytravel-12 11 ай бұрын

Your the man brother good man

@fife6215 Жыл бұрын

This video is absurdly helpful. My washer won't spin. What I'm finding on my washer is that I have lots of resistance trying to manually turn the spinner whether that's putting my hand inside the washer or tipping the washer back and pulling on the belt. I've already removed the shifting actuator. Either way, it's quite difficult. Any insight? I'll update if I find anything.

@CumminsTurbo4 Жыл бұрын

Figure it out?

@fife6215 Жыл бұрын

@@CumminsTurbo4 Gave the washer to my neighbor and then bought speedqueens

@CumminsTurbo4 Жыл бұрын

@@fife6215 brilliant. Almost there myself. You vote with your dollar. And whirlpool needs punishes for their stupid decisions to offer junk

@user-ck4uz8tf1r 8 ай бұрын

Hi Ben, thanks for your video. I have a toploaded Whirlpool washer that washes, drains, but does not spin.. I have gone through the analysis and get a 4-2 error. Running the machine in manual test mode the two agitation modes work and the high speed spin.. But the low speed spin does not start.. All lights flash once and then it is back to the two lights for the low spin.. Any idea what could be issue? I am thinking of replacing the actuator.. But wondering if that is the issue, since the machine does drain.. Thanks for any input.

@TRUMP_WAS_RIGHT_ABOUT_EVRYTHNG 11 ай бұрын

thank you for this video! i've got cabrio that currently has a gremlin! so far i've replaced the main board and lock mechanism. i got one load done and then the gremlin came back! now the damn red light keeps flashing and there is a clicking underneath.

@AllisonBastien Жыл бұрын

I think mine is the suspension rod problem that you recommended. It sounds like the thing is just dribbling basketball is back and forth. Do you have a video that further explains?

@samanthaandstephenfleming1274 2 жыл бұрын

question, noticed in your video on spin that the inner basket moves back and forth inside the drum, is that normal? I have a Maytag Commercial technology, very similar to the centenial and the inner basket moves pretty freely inside the drum.

@crystalkitchen5521 Жыл бұрын

Thank you for all the information, and information on where to buy the parts it really helps..

@bigclivedotcom 2 жыл бұрын

A meter with capacitance test is handy for capacitors, as they can reduce in value over time while still working. That results in a progressively weaker motor torque.

@kennethdante 11 ай бұрын

The cap on my whirlpool is reading just under the 5% range...41.xx uF on my meter. It's a 45 uF cap. says +/- 5%. Replace?

@elvatoandy 8 ай бұрын

@kennethdante no that should be ok.

@DonaldWells-wk8dc 8 ай бұрын

Count codes as dogs barking,kids screaming and moms scream them and You😅😅😅

@DonaldWells-wk8dc 8 ай бұрын

Get your gold chain wrapped up in manual test mode and tear the floor up while getting out of the drain pan...and throw the machine down a remote canyon.

@DonaldWells-wk8dc 8 ай бұрын

@@elvatoandylow volts rewire house and contact power company.

@raltland Жыл бұрын

We just got a used Whirlpool Model wtw5000dw2 and we love it but would like to turn on an alarm for end of the wash cycle. The does not tell you anything but we were wondering there is some code to do it? If not can we add one some how?

@kevinadams7364 2 жыл бұрын

Ben, your videos are great! My machine will not spin, the basket is completely stuck. In manually mode agitate works but the spin does not, Even trying to spin the basket by hand is stuck. Any suggestions?

@bensappliancesandjunk 2 жыл бұрын

The basket is stuck? Hmm. I'd check underneath where the pulley assembly is. A few years ago, we had this SUPER NICE Maytag Commercial machine JUST ouside of warranty that was sold to us for $25. We got it, ran the same tests you did, and found the basket was stuck. Got underneath, and found out that a squirrel had stored about 3 bags of peanuts where the pulley assembly was. 5 minutes later, and the machine was running like new!

@bosshawg4406 5 ай бұрын

I have followed everything you suggested in my Whirlpool will not move past the wash cycle even when I unplug it and plug it back in it does not make the reset noise

@peggysmith5853 7 ай бұрын

Can the bearing and shaft be replaced on this machine or does the whole gear box have to be changed? thanks

@enduringpromise 12 күн бұрын

I believe the tachometer sensor on the actuator can also cause a no spin condition. There is a diagnostic test that can be performed to confirm if the sensor on the actuator is bad.

@jjwcobain 8 ай бұрын

When checking the shift motor I had zero ohms on the terminals you said to test so I was certain that that was my issue when I got my new shift motor I tested it and it had zero ohms also but it ended up working when I took apart my old shift motor Noticed a broken piece in there that was causing it not to agitate so I got lucky that it was the shift motor but it wasn’t the ohms test that actually was the issue

@LackshmeHardeen-zv7kz 4 ай бұрын

Hi what does E1 signify on a whirlpool washer please? I'm getting this while my machine is not spin drying

@Melamamoduro 2 жыл бұрын

What if washes but only on the dryer cycle it doesn't spin till i turn it manually? it also leaks water, would this mean the transmission and bearings went bad?

@calebblack3543 Жыл бұрын

Awesome video! Thank you! I've got a situation where the washer won't spin or agitate at all, even in forced spin while in diagnostic mode. I've replaced the actuator, tested the motor for resistance (passed, average 6.2 ohms), tested the capacitor (passed as you described in video), and checked the gear assembly. I can manually rotate the drum by moving the belt so I know it's not the belt being too loose. When I put it in forced spin mode all that happens is I hear a consistent electrical humming. When I put it in forced agitation mode, it hums in time with the agitation cycle (hum, pause, hum, pause etc). So it's like the washer is telling the motor to turn the drum, but the motor is not rotating at all. Is this a bad motor?

@DRTOLLZ Жыл бұрын

I have same issue. Did you discover what it is?

@speaklifegardenhomesteadpe8783 Жыл бұрын

Wish he would answer this. I think I have the same problem. ❤❤❤

@calebblack3543 Жыл бұрын

@@speaklifegardenhomesteadpe8783 I replaced the capacitor and it fixed it.

@iwalkerpreston873 5 ай бұрын

Same issue

@morningeyes Жыл бұрын

GREAT! GREAT! GREAT!

@kennethdante 11 ай бұрын

I went into diagnostic mode and went for manually toggling between the various cycles.. the fill drain stuff all worked fine but the motor functions didn't work. No rinse or agitate but I did hear some oddball sounds. I have to run it again as I've gained some new knowledge since first running the test. The drum from the top view looks good. (removed checked that out). I have since replaced a cap on the pcb and checked motor cap under the machine.. now I'm getting into the shifter and motor diagnostics. (fault code threw me a motor control fault). Please clarify the pins on the motor to test. Perhaps i must reference the manual. This thing read like chinese the first time i looked at it but more things coming into focus as I stick to it. This thing has become an obsession I refuse to give up. I know people trash talk these machines but the fact is it ran flawless for about 8 years.

@__WJK__ Ай бұрын

Good to know! Were you able to fix it? If so, can you share all the things you did to get it running again/ty

@scootertrash911 Жыл бұрын

I finally cleared the board and the washer too off, I just didn't reset it correctly. Thanks

@waffyangel6617 13 күн бұрын

Hi Sir, your videos are very useful, but after doing the calibration it will work but it will stop again with spin, and there is a ticking sound. Can you please help me

@jackwilley7340 2 жыл бұрын

The basket hub was replaced about 6 months ago. The agitator spins with the basket. The capacitor and motor is OK. I'm thinking something like the transmission. It is fine for a manufacturer to guarantee a part for 10 years, but still expensive to install. Thanks for the input!

@shadowopsairman1583 2 жыл бұрын

If it is roaring, its that gear case

@briankunkel2754 Ай бұрын

I tested my actuator and I get OL on the pins mentioned in the video...But I get the correct Ohms when I test the same pins with the opposite colors. Video shows red on top and black on bottom pin. Is this correct?

@petroflorence7962 11 ай бұрын

I love your train station conductors hat all abord

@samantaneverson2072 Жыл бұрын

My teenage son emptied half bottle of laundry detergent in my washer as this exact one in the video it was working great no problems but after he did that, it started giving problems it's letting out the water and not washing. After I filled it manually and left it there after 2 hrs I heard it washing then after the wash cycle it drained out the water went into rinse but did not fill to drain. When I start the cycle all over to rinse and spin it still did nothing.

@bensappliancesandjunk Жыл бұрын

Check the error codes and see whats happening

@newstart49 2 жыл бұрын

Great video. ! A capacitor tester is relatively cheap and will tell you if the cap is bad.

@builder1650 3 ай бұрын

our whirlpool has the slow spin non cleaning symptom too but it is all touch button. how do I diagnose that model. about 5 years old with glass lid.

@allenvasher5358 11 ай бұрын

Does anyone know where I can get a new replacement drive motor selling 10623547 rev. A & what is the difference for the rev. C?

@johnyk721 2 жыл бұрын

Hey Ben. I have a built in Kitchenaid oven/microwave. It’s about 3 years old. When I went to use the microwave it stopped and displayed an error code F1E5. I am planning on changing the magnetron first as it is cheaper before buying a new inverter board. Have you seen problems like this in whirlpool products that are under 5 years old?

@Payitforward42 2 жыл бұрын

That inverter might not be worth replacing. Depending on the price.

@labtec4587 Жыл бұрын

I did a manual test on my washer, low spin failed (started then stopped immediately) but high spin worked fine. What could be the problem?

@user-wu8fe6rd1o 9 ай бұрын

Can you do a video of older whirlpool models that don't have any of the lights on the front? mine is just dials, so I can't test for what is wrong with my washer. It fills with water, but doesn't spin or drain anymore. We are stumped with how to get it spinning again...

@user-xg7of4qf5l Жыл бұрын

My motor is reading 0.00 on both pin sets. Does this mean it’s shot? I only unhooked the harness and checked I didn’t remove the motor from the machine.

@chuckmoody3446 9 күн бұрын

I have one of the brand new 2-in-1 washers it runs fine except that the lid lock engages once unlocks and then the locks back again is this normal ?

@mattmoreira210 2 жыл бұрын

Very neat chauffeur uniform. I quite fancy one of those myself...

@burtburt1755 3 күн бұрын

Help! I have not found anyone with the same problem I have. All my temp settings give me cold water. My hot gives me hot. I replaced the inlet with the solenoids and got the same thing. I have watched lots of videos and have learned a lot but not what I needed. Any help would truly be appreciated.

@billbrock5486 2 жыл бұрын

The washer was making a loud clicking noise in spin cycle. Replaced the actuator. Now it makes a few clicking noises, then spins fine. Is this normal?

@2lobstersinapot Жыл бұрын

To discharge that particular capacitor before testing use two screwdriver. Each one touching the seperate prongs then cross the screwdrivers to have the metal touch. On that capacitor the plastic housing stops you from simply laying the driver across.