WHY MY LAND ROVER DEFENDER WAS SO CHEAP…

Рет қаралды 8,596

23 күн бұрын

💥 FREE PARTS GUIDE 💥 - I have put together the ULTIMATE guide for my Land Rover Defender 90 build and you can get it for FREE!
CLICK HERE to download your FREE GUIDE 👉🏻 mailchi.mp/ebb25626f0c0/parts...
➡️ This 12-page digital booklet includes all the parts I fitted to this Land Rover with LINKS of where to buy EVERYTHING 📦. It also ANSWERS the common questions I get asked about the build!
If you enjoy the channel, please make sure you click the SUBSCRIBE button to ensure you don’t miss out on new videos 💻
MY FILMING EQUIPMENT:
📷 : Insta 360 - www.insta360.com/sal/x3?...
💡 Lighting: amzn.to/48riwIM
KEEP IN TOUCH:
My Website - www.thedoctorsgarage.com
Instagram - @The_Doctors_Garage
Tik Tok - @thedoctorsgarage
Facebook - /thedocsgarage/
AFFILIATE LINKS
This description contains affiliate links that allow you to find the items mentioned in this video. We may earn a small percentage from items purchased via an affiliate link which helps support the channel but don't worry, there will be no cost to you. Thank you for your support!

Пікірлер: 45

@thedoctorsgarage 21 күн бұрын

FREE DEFENDER PARTS GUIDE HERE! mailchi.mp/ebb25626f0c0/partsguide

@BigArch6564 20 күн бұрын

Great share Doc, but let's not forget.....Defenders don't leak oil, they are only marking their territory!

@hiliak 20 күн бұрын

It’s leaking power 😁

@453421abcdefg12345 20 күн бұрын

Not sure who told you the harness should be changed every year? Mine has been running since 2003 without any problem, 130,000 miles and no oil in the ECU cable, I think there a lot of people repeating something they heard in the local pub! The diesel pressure unit is however something that will need changing, and the small oil drip is probably residual oil from the previous oil leak. Chris B.

@thedoctorsgarage 20 күн бұрын

Thanks Chris- I have no idea where I got that info so thanks for clearing that up!

@markdavis2475 20 күн бұрын

Definitely invest in a small torque wrench. The TD5 has a lot of alloy parts held on with M6 and M8 bolts. Very easy to strip.

@theloneranger2101 21 күн бұрын

Doc, that oil leak could possibly be the remaining oil from the original oil leak still on the engine when you warned up the engine. I would keep checking the cardboard over the next few days, just to see if the oil leak gets any worse. Also, buy a torque wrench, and check the torque settings from a Defender manual for the rocker cover, and go around the studs on the cover again and check they are all set to the correct torque settings. It is possible you have not tightened them up enough, just it case you strip or break one off like you did originally. Good luck, Doc.

@thedoctorsgarage 21 күн бұрын

Cheers thanks for the tips 👌🏻👌🏻

@eightlegger 21 күн бұрын

Check that the fuel pressure regulator isn't leaking fuel. It's very common for them to do so, I've lost count of how many I've changed over the years, it will require a complete new regulator assembly if it is leaking. The regulator lives on the back of the cylinder head on the right hand side, they're a bit fiddly to do if you haven't done one before but a lot easier on a Defender than a Disco 2.

@thedoctorsgarage 21 күн бұрын

Will check it out and see if that is leaking - thanks for the advice!

@453421abcdefg12345 20 күн бұрын

There is no need to replace the whole unit, only the valve in the unit requires changing this refurbishing kit is available for circa £20. Chris B.

@franciscgedeon9237 21 күн бұрын

just add a few zip ties to make the gasket stay put on the cover while you fiddle with it upside down, once in position you can cut and remove the zips.

@sukottora 16 күн бұрын

Honestly, oil in the injector harness, causing problems with the ECU, etc, is much LESS of a problem than people suggest. They see a bit of oil around the harness connector and panic.

@mike07905 14 күн бұрын

Leak is fuel pressure regulator. Fiddly but easy enough. My prediction for the next videos in this series: -Notices oil level is rising / oil isn't going black. -Replaces injector seals (Oil still rising) -Discover that cylinder head has hairline crack around no 5 injector -replace cylinder head... Then swivels and seals, half shafts, wheel bearings, all the bushes, new rear quarter chassis and brakes.... Then it'll almost be a good car for a while!

@thedoctorsgarage 14 күн бұрын

I hope not 😂

@u2kjib4cjkqn 16 күн бұрын

Rocker cover gasket always shrinks with age and need changing every few years,helicoil that bolt simple job.

@sukottora 16 күн бұрын

It looks like your fuel pressure regulator is weeping. The diesel picks up the muck on the back of the engine and bell housing, and by the time it hits the floor, it is black. You can't always smell the diesel, and it just looks like a small oil leak. You can recondition the existing unit but a new one is only 100 quid. One thing to remember though, as well as ordering a new gasket, order a replacement (original) O ring. These sit between the block and regulator don't come with the unit and can sometimes be the cause of the leak.

@simonbrannelly4409 21 күн бұрын

Definitely the way to go...have a go yourself...makes you feel connected to your lanny and gives you confidence flinging the spanners around..keep it up doc...she's going to be a beaut 😊

@tomrichards1574 18 күн бұрын

There is another seal just below the rocket cover where the head joins together during assembly.. check that and put some RTV sealant on it

@phillipchandler8862 21 күн бұрын

Is it leaking from the bottom of the bell housing(small hole) if so and it could be the rear crank seal.

@DavidWilliams-yg2xh 20 күн бұрын

Always worth adjusting the injector rockers whilst your in there 👍

@georgemobbs4413 21 күн бұрын

well done its important to stop the leaks if you can and then its down to preventive maintenance but you never stop learning take care Doc

@paulonelife 21 күн бұрын

I have been looking forward to this update. Great content

@thedoctorsgarage 21 күн бұрын

Cheers! Thanks for the support and for the advice to get it fixed!

@rogerwileman9965 20 күн бұрын

Have you never tried putting petroleum jelly on your electrical joins it helps with the sealing of the joints

@thedoctorsgarage 20 күн бұрын

No but that’s a great tip thanks!

@davidgriffiths7068 21 күн бұрын

Great content as usual, definitely thinking of doing mine now!

@thedoctorsgarage 21 күн бұрын

Thanks- was a very satisfying job to sort

@Jabber-ig3iw 21 күн бұрын

Recently had mine done, got my garage to do it whilst it was in for other stuff that was well beyond my skill set and inclination.

@kevinwhite1077 21 күн бұрын

nice video keep them coming

@thedoctorsgarage 21 күн бұрын

🙏🏼🙏🏼 thanks!

@farmer6861 21 күн бұрын

There’s also a wire that can rub against the chassis which in the wet causes it to short and the Rover go into limp mode. Mine had 250000 miles on the clock, but after an EGR delete, TD5 Alive remap, and bigger custom turbo it went like a train!

@thedoctorsgarage 21 күн бұрын

250k miles is good going!

@Andy-od7fg 21 күн бұрын

Definitely invest in a small torque wrench next time. The setting on these bolts is crazy low. You'll never be able to guess with feel. Even with the torque wrench you doubt they are actually tight enough, but trust the repair maunal.

@thedoctorsgarage 21 күн бұрын

Great tip I’ll get one thanks Andy 👌🏻

@kevinlally7653 21 күн бұрын

Looks great! I'm keen to follow and buy one soon, and gently update / refurb. You mention it was "so cheap" - what sort of base price did you end up with? Do you have a total budget in mind for the plans for this car? I know you were refreshingly open about the Def90 costs, and I'm keen to get a sense of current pricing and ideas for budgets for doing something similar to you. Thanks again - I've really enjoyed all your content, and keen to see this build unfold