Can you call a hepa vac CUTE? dailyhammerandhome.com/can-you-call-a-hepa-vac-cute/

As a woman getting into power tools (this tool will be my fifth DeWalt added to arsenal) I really appreciate you explaining what each attatchment is with a practical visual guide. Many people simply _tell_ the viewer how things work, they don't _show_. So, thank you. Excited to try this tool out!

As a tradesman for over 35 years, every now and then a product comes along that amazes you. The multi-tool is one of those things. An ex colleague of mine turned up at my house to help me replace my consumer unit ( fuse box ) and fit new sockets in my kitchen, he had a cheaper corded Worx one. We used it to cut out the plasterboards for the sockets and, to cut boards to add new sections of board where required. I truly was blown away by its versatility, cutting copper pipework in awkward spots, cutting floorboards ( drywall ) to gain access to pipes/ cables it’s a very good tool to have at your fingertips. He gave me the tool when we finished the job as he’d just bought a new battery one. Within a few weeks, I was so impressed I went and bought the DeWalt 18v version. This is a ‘game changer’ tool, and other people have bought one on my recommendation. Mine cost £100 bare unit, to me it’s worth £300 all day long, if you work as a tradesman once you use it you’ll wonder how you ever managed without one.

Awesome video. Was trying to figure out if I “needed” it. My wife hates you but I added a tool to my arsenal ‼️

I just bought this the other day, absolutely in love with it. We were using my dads old mastercraft with old worn out blades....night & friggin day

Great demonstration; practical and informative without the usual boring and irrelevant 20 min intro. Thank you.

I had to re-caulk all my windows on the exterior of my house. I bought this and put a scraper blade on and took all the caulking right out. My house is brick, so I would hold the blade so it would hammer on the brick lightly and it would remove all the all caulking off the brick. Awesome tool.

Love your review style. Great to have practical uses demonstrated with pro tips. Wish other channels would do the same instead of just speed runs. I think your channel definitely deserves a place at the top of Tool KZfaq.

Professional carpenter here, this tool is absolutely amazing. I use a corded Fein for yrs. This tool with its fine trigger speed control is amazing . Never went back to the corded tool. I use a 2ah battery because they charge quickly and have excellent run time.

Buying one of these today to pull up old carpet, and resend the floors. this tool will help with the tac strip and the corner sanding

I use mine a lot in the electrical field. As an apprentice I use another blade attachment by rack-a-tiers for single,double, and data cut-ins in dry wall. Helps me zip through the whole process. I’m glad I got one.

Just bought one of these tools bundled with a Dewalt drill, had no idea what I'd use it for and this was a great video covering use cases and demo. Thanks!

Put a carbide metal cutting blade on my recently purchased dewalt multi tool and used it to cut off some of the fins on the underside of an aluminum threshold ( I’m a commercial door installer) so that it could transition from the concrete to the carpet more smoothly and could not believe how much easier and faster it was versus grinding them down. It’s definitely a tool to use for more precise and hard to reach situations. But definitely a LOUD tool.

I heard these were originally developed to cut off casts and Fein held the patent. Now everyone makes one. I have 3 and they keep getting better too

Good luck to all who own this. I bought one, tried it and returned it. It's the first DeWalt tool I ever returned. Reason: I did not cut aggressively enough. My beat up Rigid put it to shame. Why: Just check the specs. They all recip at about 20K strokes per minute. The reason the Dewalt sucks is the recip angle (the full angle the saw goes thru each cycle). The DeWalt was 1-1/2 degrees and the Rigid was 3 degrees. Heck, a cheap Ryobi is 3 degrees. The DeWalt cuts only half as much for each cycle. Don't just oh-and-ah just because it's painted yellow. Check it out. And this is coming from a DeWalt lover!!

I wasn't sure i needed a multitool at first but decided to get the Bosch gop 18 V ec thanks to this video. It does a solid job but unfortunately just like that DeWalt it's loud as hell. protect your hearing lad, never take it for granted.

I lost hearing in my right ear using this exact tool while not wearing hearing protection , now I have to wear a hearing aid and I have tinnitus all my waking hours , be careful and wear ear protection

indespensable in my opinion. running a lumber liquidator one that cost 20 bucks for 6 years now.

Needed to cut some small thing, borrowed one from my father, as soon as I was done with the job went to store and bought tool for me and big blade kit. This too does a lot of thing not perfectly bit most of the things it does no other tool can handle.

Thank you for this fine and simple to understand operations of the tool.

thanks i just bought this type of tool not the same brand but you gave me a great tip on how to cut straight so i can fix my tile floor and get under the cabinet. You got a thumbs up from me. Thanks for the help!

Tip Use the carbide blade to cut thru plaster walls with little dust and cracking

I just sold my 20v and replaced it with a 12v extreme. I loved using the oscillator. I use it mostly to plane and level wood pieces, and removing adhesive junk.

I used for irrigation and PVC and works well you just need to have a learning curve on how to handle, circular pipes are the worst but if you are working with square materials it's super easy Let the tool do the work don't force it in like traditional plunge saws

I bought it after watching your video. I love it. You’re definitely right about using the slimmer battery. It makes it even easier to maneuver. Thanks!

Thanks so much! Just got the DeWalt 8-in-1 on sale and had no clue how this tool works! Probably saved me from both frustration AND injury!

THANK YOU SO MUCH FOR SHARING! I HAVE VISION DIFFICULTIES, SO MY APOLOGIES FOR THE ALL CAPS. I ENJOYED YOUR VIDEO, YOUR RECOMMENDATION FOR THIS TOOL, AND THE 'HOW TO USE' TUTORIAL. PEOPLE LIKE YOU ARE THE ONES THAT MAKE KZfaq SO GREAT AND HELPFUL! I HOPE YOU AND YOUR FAMILY TAKE CARE AND STAY SAFE!

It has a 3 speed selector. The trigger meters speed as well.

I appreciate the review, but especially the pro-tips for controlling cuts, thanks!

Good review. I do most of this stuff with my dremel tool. I do like the sanding function! But that would be the only reason I would buy it.

No doubt if you're having to hold the copper pipe with one hand and the tool with the other it will move around at max rpm, but using both hands to cut metal that's held in place and feathering the triggeris the way to go.

7:07 Jesus, am I glad I watched this video. I was about 2 days away from taking my brand new DeWalt Oscillating tool and plunging in to some finished and painted drywall. My tiny box would probably have ended up with some annoying patching and painting. Great demo and thanks for the advice on practicing with garbage.

I use this tool for more things than i originaly bought it for. Worth 3 times its cost.

To show how it walks all over the material you held the tool in the air unsupported, when you went on an angle you braced one arm on the material and the other on the first arm. Then when you supported your arm for the plunge cut it went well and you're all "I've been doing this for a while so.." lmao.

I have and love this tool. Becarful how hard you work this tool tho. The back od the handle gets hot and eventually the switch on my went out. I then got the non xr version with the black tool change handle and it is pretty good as well. A little less power but also a little less vibration in the hand. The back of the main handle gets hot on that one as well.

I was going to buy a jigsaw but decided to check out the multi tool to see what it’s all about. After watching your video I think I’ll buy a multi tool instead because it will be a lot more versatile than a jigsaw.

Nice been wanting a cordless palm sander but might go with this many uses👏

One of the greatest tools ever

Bought one today and came here searching for info. You did a very thorough job. Thank you!

That DeWalt brand is so powerful

You're right... I probably need something like this...

The Dewalt has a nice blade connection. My Bosch 12V uses an Allen screw to hold the blade but no holder for the Allen wrench. I use it for a lot of drywall and electrical cutouts. My Dewalt cutoff saw cuts pipe and HVAC metal duct.

Great video. Thanks so much for the time and explanation. I’m sold

I've seen some people say these things are useless, but they've saved me so many times.

Careful those things are not for continuous duty. I've burned out two already, including one high end Milwaukee M18. When it gets hot give it a rest. My go to multi tool is still my Milwaukee M18s. That being said, the cheap corded ones are just as effective minus the fit/finish/feel/balance and won't last as long.

Thanks for the awesome demo as I just found a tool I never knew I needed but now wandering how I ever went without it. You are the best

My kind of guy - Did anyone else notice the Sig Legion hat? You go man.

Very nice of you to share your experience. Thanks. God bless.

Thanks Brad for the great overview of the multi-tool. Appreciate the various demonstrations. Keep up the good work!

I love my DW multi tool. It has got me out of several difficult situations doing remodels at home.

Great video. Thanks for showing me the bits.

I just bought one so this vid. was perfect to get me started. Thank you.

😅 I have a problem I'm watching a video about a tool I already own and use on a daily basis 😂

Been using for a few times this week. Very loud, cutting good, weight ok, to much vibration compared to other makes. Very good tool free blade change. I prefer the Bosch, or fein

Can you say “grout” again please ? Love it.

I broke down and bought that new fein. Wasnt cheap but its paid for itself already.

I like to use the flex volt system on the multi tool it lasts me all day

Here in the usa, thw atomic is only available as a no speed selector model, the xr on the other hand is only available with the xr model. sometimes they put the speed less xr model into their low end kits at Lowe's. same with the brushless 6 1/2 cirvular saw bare tool has a rafter hook, the ine that cimes in the 4 tool brushless kit doesn't have a rafter hook, same spec saw though. its weird sometimes. but i guess, in the end it comes down to pricing.

Thanks! I like the tip come in in a angle.

Best video review ever!… truly detailed on how to use these tools. Txs a lot😎

finally a video with some practical uses and tips, thx!!

I apologize but the Makita Multi-tool is better. Less Vibration and smoother cutting. That said I do like Dewalt with 2AH battery for cutting in dark or ceilings.

One of those tools you use more and more got one free with 200 dollar 2 pac 5 .0 battery kit with bag and charger lowes black Friday deal I have the Bosch corded but this is a nice tool especially with the black Friday deals

great vid thanks just picked one up finally, did you by using the blade lock to the left while pressing the trigger will lock it on and stays on without holding down the trigger

I wish he would say which model he has. I know they are all pretty much the same but there are minor differences that could be relevant between the models these days.

What's the advantage of an Oscillating Multi Tool over an Angle Grinder?

I have yet to find the depth gauge attachment at any store or even on the Dewalt website. Don't know why Dewalt is keeping them away from the public. Also, I noticed the pricing of the different blade attachments is a little steep like $17 and up.

That Was A Good Review & I Didn't Even Know About The T Stack so I'll Be Checking That Out & Your Ch. MORE 👍

You didn't show everyone you can lock the speed without using the trigger, although when that's done it maxes out the speed. But still pretty cool feature!! Especially when sanding since you don't have to hold the trigger down!

Thanks for sharing your expertise.. you mentioned you have a blade for removing tile but that it’s not for cutting tile.. is there a blade I can get for this tool to actually cut porcelain tile?

Use a sawzall for metal and everything stronger or bigger. This tool’s for finishing.

Tool is great. But safety first. Always take off the battery when changing bits!

Wondering if it would cut through tin? I'm installing that on my ceiling. We used tin snips. But panels are 26" wide. Some need trimmed my place isn't exactly squared up. So getting them pre cut doesn't always work. 😬

I got almost all my tools dewalt very fan of this toys

Awesome video

Check out the new festool multi tool it's probably the best on the market for a whopping $749 for the kit 😆 btw the DeWalt flexvolt mixer is a beast and a must have for someone like you.

Should i get the 12v or the 20v. Heard 12v is faster abd precise

It was the tool purchace i regret. I hardly ever used it.

This one fits so good in my hand. Unfortunately, no angular and depth stop like festool / fein. Those suckers are sooo expensive but I have no choice, it's just perfectly designed, not to mention the vac capability of the vecturo i'll buy.

I have had a few multi tools but the dewalt beats them all. Great tool and so handy.

Could you provide a link where you can get a kit with many of these blades/attachments you showcase in your arsenal?

Very helpful. Thank you.

Getting ideas, still thinking about it. It might work.

They are a great tool for a few jobs, but the noise is terrible, I have had two, but will a tool that is quieter if possible.

Thanks heaps for that. Great informative vid.

I Have The First Multitool From Ryobi Cause Back Around 2019 The New Brushless Ones Weren't Out Yet. This one I Have Uses Closed & Open End Blades. I Don't Know If The New Brushless Ryobi Do Or Not. I Haven't Tried The New one Yet.

You can also rotate the blade

Did an frp job and it was a hassle until I found this bad boy.

I received this for Christmas with the suggestion that I use it to cut away a bunch of wood screws my neighbor put through the fence. Will this work?

Very good i like it your review , thanks

Thanks for sharing 👍definitely a two handed use 👍

I didn't think I'd want one of these but have already found myself using this for things I'd normally have to grabbing a sawzall or a grinder for. It's compact design definitely is handy.

Loved the vid. Very informational.

do all those tools come with it

That is real handy for taking out the old grout when you're replacing a pane of glass in an old window frame.

Never have seen this before but it looks like a great tool for hard to cut places! Bob Kinsley

They’re great for drywall

I put a belt clip on mine but the shitty part about it is they do not provide the nut for the screw for the belt clip, I had to take it off another tool and it was a pain in the ass to get the nut where it needs to go.

Hi Brad, Check out dewalt oscillating tool that has the 3 speed on it. I purchased one from Lowe's a few days ago and it's pretty cool. I have both styles but i like the the 3 speed model. It's nice when you need to control the speed. It takes some time to get use to it but then you say "oh yeah", LOL... Thanks for video...

very good video