This is the first video I have seen where someone actually breaks out the tape measure and gives us the dimensions. Well done! We can use that info and adapt it to our unique situation making this not just useful for what you are doing but for so much more. Thanks

Great video and you helped me decide to put 3rd gen raptor take offs on my 2018 FX4 with the long bed, just like yours. I did a 3.5 lift with new UCAs, but other than the front mud flaps, they fit like a charm! Great video!

Outstanding video dude!!! Short and sweet and your delivery style is spot on. This video steered me away from negative offset aftermarket wheels or costly 20" tires for my stock Platinum rims. Picked up a set of 2021 Raptor rims and tires for $1,500 w\450 miles on them. Had to drive 8 hours round trip to get them, but $100 in fuel and a little time was well worth it imo! Now I just have to get motivated in this cold weather to throw the 2.5" pucks in and enjoy less power and fewer mpgs! ha ha Thanks again!!!

Apparently KZfaq can read minds because I started thinking about this yesterday and your video was suggested today. Great info! Thanks!

Great video. Very informative. You helped me make my decision. Thank you

Great review!! Thank you so much ☺️

Looks real nice and beefy ' I've experienced rubbing when turning into a ramp or drive way, and also vise versa. But ' l got the hang of it after a while. Driving for a few weeks you learn all of it's little limits here and there. Bad ass looking truck you have there 👍🔧

Thanks for the video been wanting to do this to my 2012 FX2 F-150 I already have the two and a half inch level kit now I'm on the hunt for some raptor wheels

Nice video Jason! Totally found this by accident because I had the same question!!!

Straight to the point👍

Thank you n God bless. I asked the dealer n they can't confirm. So your video helped. I am planning to do same for my 2023 lariat with 4 in lift.

Good info. Thats what I am looking to do. Love those wheels. Looks great

You did an amazing job oh this video!

Great video. I installed the 2.5inch leveling lift took me 2 hours total. Raptor wheels looks great!

Looks great brother, just bought my first ever truck. 19’ f150 lariat. Lookin to do exactly this.

Exactly the video I needed to see. I already have the 2.5 leveling kit, and I now need to find a set of raptor wheels and tires. Thanks for the very informative video!

Excellent video! Thanks a lot

Looks great!

That looks great!

Awesome content…subbed and like!! Thank you!!

Great video thank you

Looks great.

Great video - exactly what I have been looking for, thank you. Where did you get your Raptor wheels and what color are they listed as?

It's amazing how much of a difference 2.5" makes

Nothing a little trimming with a knife can’t fix on the inner fenders if you rub while turning and compress the shocks. Looks awesome!

I like your voice over edits lol. Truck looks nice

Good Job!

I have a ford lariat 2019.. I added a 2.5 level kit.. I’m just looking for stock raptor wheels.. I’m super excited

Awesome video sir! Did you have to calibrate your speedometer after installing this set up?

I did this with 1.5" Motofab spacers on my 18 2.7EB Super Crew 5.5ft bed. 2.0" spacers would have been enough for your ride. Notice what happens when you put the smallest load in the bed or a trailer? She is way over level then. You will want to lift the back some if that is the case. 3" blocks or 2" blocks plus RAS. 2.5" level spacers are a tad overkill if this is all you wanted to achieve. Bilstein's set @ 1.75" are also plenty enough to achieve this as well, but rode too stiff for my taste. Its the +34" wheel offset that makes this possible. +18" offset is probably the most you can get away with when running the 315/70/17's and a simple spacer lift.

Yes they will I have the tires of my raptor 35” and installed them on my old f150 2004

Would be cool to have a short update video comparing the ride and road noise.

Nice work. That’s how these trucks should look from the factory! ;) On my 2011, I have a 2” level with Bilstein 6112s and 285-75r18s on newer factory 18” wheels. Slightly larger diameter than yours, but a fair bit narrower. Like a 35x11 probably. Had to pull mudflaps, but doesn’t rub anywhere otherwise, with a fair amount of off roading to boot.

Thanks for watching my Raptor tire video! Please like and subscribe! Here are other videos you may enjoy: Apply the Herculiner bed liner → kzfaq.info/get/bejne/i7eXa9h7mJu6ZKc.html I recently added 3" rear lift blocks for towing. See the install video → kzfaq.info/get/bejne/bLtzoKels9qmm6s.html

You can go to a 35" tire on stock rims if you get 295/65R20 tires and a 2 inch leveling kit.

Great video Thanks for sharing New subscriber here

Any rubbing when off-roading? Looking to do Fox Coilovers that do a 2 inch lift… not sure if that will do it….

how are the pucks holding up? im debating on doing this as a short term since I just purchased raptor takeoffs. Wasn't sure if it was going to ruin the ball joints completely for a couple months of driving before the new suspension comes in.

I didnt see an update video. How did it work when you went off road? My 2.5" Bilsteins we only good enough if I was very careful. Nothing too bouncy.

How much cutting do you think I will have to do if I install 20x12 -44 offset rims with 37s on a 6.5 in lift in a f150

The 80s metal riff made this vid 😂.. btw im looking to put 35’s on my 2019 f150 but dont have the patience to install the 2 1/2 level.. could you tell me what u paid so i can know if im getting ripped? Thanks bro! Subbing!

Truck looks great. What bed cover is that?

I'm currently running 35/12.5/20 on a 6inch lift, been thinking about the raptors 315/70/17. I wonder if they would be too small for the lift. Great looking truck btw..

curious , what there any difference in the drive with the larger wheels? I once bought a new jeep with the large wheels and lifted a bit , the vehicle would not go over 58 mph. The dealer actually had to replace the gears in order to have the vehicle drive a normal speed.

2021 F150 XLT 4x4 fits 315/70R17s with no level or lift required. Stock 17s with stock offset

I want to do this on my 2016 F-150 XLT Sport, but I’m still thinking about it. I haven’t got a final decision

Nice video. Does that combo fit in the spare well?

Your truck looks great! Are these tires 315/70 R17?

Were you able to fit the setup for a spare under the truck? Thanks.

For the money it would look better with just a level & 295/65r20’s (35’s) but I’m biased because that’s what I have on my 2022.

What generation raptor wheels? I have a 2020 fx4 with the tow package. I want to do this exact thing on my truck!

How do these fit when offroad under some articulation / flex?

Curious if at full compression if it would rub.

Nice truck, did you get any rubbing in the upper control arms?

Hey I see they fit without rubbing but what about scrubbing your a-arms? My tires rub the UAs??

So do I need 2 kits or just the one in link. It says just front.

I have a 2004 Lariat 4x4 with tow package, 2" level, 325/60/18. Tires rub a bit at full lock. Does anyone know, would Raptor wheels and tires fit with my setup?

a stock f150 will fit 33's. that's what's on my truck now, no lift or level or trimming.

The set up is bad ass, would these fit on my 2017 ?

Stock Raptor +34 offset on those wheels?

I've had this exact question in mind for a while. Any update on how much your MPG changed with the lift and new tires?

How close are the tires to the upper control arm?

How much the shop charge to install level kit?

Will 37 tires fit if I add the motorfab leveling kit 3 inch with a 2 inch lift fox shock?

how your front axles looks with a 2.5 level kit 🤔

how did your mileage change with larger tires?

Do you notice your tires rubbing the crash bars in the front at all?

Love raptor wheels and tires. I had no issue with clearance at all!.. Oh, wait a minute. I have a 17 Raptor supercab that is almost 5 years old now. Love the hell out of it still... Daily driver. Nice looking crewcab with the bigger bed. Looks much cleaner with the big bed.

O 👌 wow

Why haven’t I’ve done this to my f150!? I’ve had it for two years now 🤦‍♂️

How much did it cost to get the kit installed?

Put raptor rims and tires on my f150 that already had a 2.5 in leveling kit on it but on a full turn the tire rubs on a bar in the inside of the truck😢

I lift 3" then put the raptors but when I turned I heard a noise then cut the plastics dow bumper apparently was good but start the noise again, finally I put off, I saw a light on cluster about pressure module fail, I don't recommended. the raptors are too heavy for a regular f150

What happened to your 07’ f150?

How much did this improve your ride quality?

So just to be clear the tire size is 315/70/17?

What year are these wheels?

285 75 17s rub on a 2016 F150 Thats with Black Rhino 17s with a +6 offset

Does your truck have the max tow package?

How much those wheels and tires set you back?

Are you using the stock spare with those raptor tires ?

I like the chrome ones better

How does the Raptor differ from the rest of the F-150's, that it can fit this diameter tire?

Well, you could have saved yourself some money and just bought some 275/65-20 tires that said let me explain a 315 70 17 is approximately 34.3 in tall with 8.7 of sidewall your stock tire is approximately 31.9 in tall with 6 in of sidewall and a 275 65 20 is approximately 34.1 in tall with 7 inches of sidewall the big difference is the stock wheel 20x8.5 + 44 would have worked with the 275 65 20 where as the raptor wheel 17 by 8.5 +55 won't. I think you wanted to level and raise your truck the wheels and tires were an excuse because once again you could have just took the spacers out of the rear approximately three quarters of an inch and bingo still has a little rake but it looks much better. Whichever way you decided to go I hope and pray to God that you took a Phillips screwdriver and adjusted your headlights when you were finished because nothing screams I'm an idiot more than a raised F-150 with the headlights glaring and everyone's face at night but then again as long as you can see EEF everybody else right?...but at least your tires aren't sticking way out like some monster truck. The reason Ford runs a +55 is that it keeps the tire from sticking out which kills fuel mileage that much more

What offset are those rims???

Not my truck but the factory rims looks 1000% better

what is the difference 20x9 to 20x10

Everyone wants a Raptor look and sound life’s short just buy a damn Raptor. You like it I love it…..

Nice truck nice wheels wrong combo

AWESOME! Check out the Katzkin Leather video I just dropped on my channel!! CRAZY before and AFTER! feels like a new F150!!!

Level kit

I wonder if fox 2.0 would be enough for these wheels to fit. I want my f150 to look like a raptor lol.

How the ride quality

Now to just convince the wife. Lol.

Plenty of room after the level? when you turned your wheels the entire truck moved. you will rub guaranteed

The video of the completed truck would have been much better if it was out in the sun and not in the shade.

Trade for a Rap.....👍