Will the F100 Start?

Рет қаралды 2,083

3 ай бұрын

In this video I attempt to get the engine to turn over and see if it will start up.
Shot with GoPro Hero 12 with the Media Mod, edited on Davinci Resolve 18.
Gear I use:
GoPro Hero 12 Black - amzn.to/48oeFw3
GoPro Hero 9 Black - amzn.to/3ZCTpP7
Media Mod for GoPro Hero 9 thru 12 - amzn.to/3CPKOi2
Rode Wireless Go II mic kit - amzn.to/3iJrj4c
GoPro Hero 8 Black - amzn.to/3QLpj7V
Media Mod for GoPro Hero 8 - amzn.to/3ZCAeoA
GoPro Hero 5 Black - amzn.to/3XuKMUQ
GoPro Karma Gimbal for Hero 5 - amzn.to/3GIWa8P
Want to help support this channel, you can "buy me a coffee", check it out! www.buymeacoffee.com/krusebuilt
Credit for the music in the video:
::::::::::::::::::::
Epidemic Sound
Try it today! www.epidemicsound.com/referra...
::::::::::::::::::::
#krusebuilt
#kruseview
#bumpside
#fordf100
#f100

Пікірлер: 49

@markursich3305 3 ай бұрын

Fun project! Just a bit o' advice for solo work, get yourself a remote start button and obviously replace the ground cable. Keep on rockin the vids out Andy!

@AndyKruseChannel 3 ай бұрын

Thanks for the tip!

@blaketison1802 3 ай бұрын

Super excited to see how the truck progresses. That generation truck is really cool

@AndyKruseChannel 3 ай бұрын

You and me both!

@Randywm10 3 ай бұрын

This is going to be a fun project! Almost time for a bigger garage!

@AndyKruseChannel 3 ай бұрын

We're way past time for a bigger garage. :)

@AlfsMustangGarage 3 ай бұрын

Heck ya. They don't always go that easy!

@AndyKruseChannel 3 ай бұрын

I think I cashed in all my chips for this round. :)

@Redmist.65 3 ай бұрын

I was about to say the same. It took me 6 months to get my mustang running correctly! it certainly didnt go on the first day haha.

@davidbutler5114 3 ай бұрын

'Knock on wood , It's not leaking anything right now." Amen Brother, Amen. 😬

@AndyKruseChannel 3 ай бұрын

If it does, I know who to call. But my window of time is shrinking, he may be moving again, so...... :)

@Ricardo_Wade 3 ай бұрын

I also just a aquired a 57 chevy 3100 also has not ran since 1998 😂 so fun

@AndyKruseChannel 3 ай бұрын

It's great to have a project on the side, something to turn a wrench on. :)

@Ricardo_Wade 3 ай бұрын

@AndyKruseChannel the 67 mustang will keep me busy during spring, I need the warm weather to paint the engine bay and then I can start with the all american wiring

@SlowInFastOut1776 3 ай бұрын

I'm so excited for this! I love old trucks & am looking forward to the project.

@AndyKruseChannel 3 ай бұрын

It might need the mind of a Porsche owner to sort out the difficult bits. You know anyone? :)

@davevan8864 3 ай бұрын

Good start!!!!

@AndyKruseChannel 3 ай бұрын

I was surprised it started as easy as it did. On to the hard stuff! :)

@MK4PERFORMANCE 3 ай бұрын

Love the new build Andy! Looks like a lot more run out in the garage is coming your way!

@AndyKruseChannel 3 ай бұрын

I might have to park the Toyota outside once I get the Mustang back. I haven't been able to convince the Boss to park her car outside so I can fit all three of mine in the garage. :)

@andydimartino6733 3 ай бұрын

really enjoying your channel Andy! keep up the great work

@AndyKruseChannel 3 ай бұрын

Thanks, will do!

@broke_dongle 3 ай бұрын

Not a 460 but still a Fun Engine .

@AndyKruseChannel 3 ай бұрын

Yup.

@johnnix4370 3 ай бұрын

Watch out for the hood latch. You’ll loose some skin on it. Engine sounds good.

@AndyKruseChannel 3 ай бұрын

Not just skin, I swear I'm loosing brain cells too. Argh. :)

@johnclemans7802 3 ай бұрын

Uncle Jessie Edition

@AndyKruseChannel 3 ай бұрын

Duke's Jessie?

@johnclemans7802 3 ай бұрын

@@AndyKruseChannel My father had a 2nd owner '71 Ford F-250, 390 ,C-6. White and Light blue. I nicknamed it Uncle Jessie from the Dukes of Hazzard.😎

@georgeryan603 3 ай бұрын

Love your new Taco

@AndyKruseChannel 3 ай бұрын

Thanks :)

@5798Mike 3 ай бұрын

Nice!

@AndyKruseChannel 3 ай бұрын

Thanks!

@fordtechlife 3 ай бұрын

Lol seen you running to shut her down good stuff 🔧🚗👊🇺🇸💪

@AndyKruseChannel 3 ай бұрын

It's usually because I don't know what I'm doing and I don't want to cause any more damage than what is necessary. :)

@SteveKrause-js4wb 3 ай бұрын

Hi Andy I'm Andrew krause

@AndyKruseChannel 3 ай бұрын

So you’re the guy who everyone thinks my last name is spelled like. 😁

@bofa83 3 ай бұрын

This is a roadkill garage episode.

@AndyKruseChannel 3 ай бұрын

Could be. :)

@hughphillips67Mustang 3 ай бұрын

Hey Andy, you may have seen this already by time you posted the video, but don't forget to take the cardboard out from infront of the radiator. I know you will probably change the radiator out eventually anyway. But, just incase you didn't see it.

@AndyKruseChannel 3 ай бұрын

There isn't a piece of cardboard in front of the Rad, but there is a worn-out piece of mesh that I have removed. :)

@SmackeysGarage 3 ай бұрын

Is it a 352 FE or a 390? Sounds like it is running pretty good. Welcome to the FE family! Fun, but expensive! Also, it will leak from the rear main seal soon 😂 Mine did even with a new one.

@AndyKruseChannel 3 ай бұрын

It's a 360. I am learning that all the 390 stuff will fit on this engine, so that makes it a little easier to find parts. Don't Jynx me on the rear main, I don't want to do that install! :)

@SmackeysGarage 3 ай бұрын

@@AndyKruseChannelif for some reason you end up needing some stock 390 stuff I have a lot of oem parts. I have a four barrel intake as well but it probably weighs a hundred pounds

@AndyKruseChannel 3 ай бұрын

@@SmackeysGarage That manifold sounds tempting, but shipping that across the country is going to be pricey! :)

@hughphillips67Mustang 3 ай бұрын

What in the world you doing with a F100? I just sold a running, driving, 67 F100 in better shape than that. Wish I knew you were looking.

@AndyKruseChannel 3 ай бұрын

Yeah but that '67 is a one year only truck, that'll just be more expensive for me down the road. :)