Winching Out a Ryder Box Truck in DEEP Mud

Рет қаралды 33,570

9 ай бұрын

Winching Out a Ryder Box Truck in DEEP Mud. While this isn't my typical super crazy rollover or container job, I had lots of fun with this one. The truth is smaller jobs like this are done all day every day, and I've been getting lots of positive feedback from you guys on posting more. So as long as you guys request it, I'll keep posting more of these small jobs.
This winch out was done a couple weeks ago right after SoCal got hit with some heavy rain due to Hurricane Hilary. Hulk, my 2020 50ton rotator, is a very heavy girl lol. It would have been difficult to not only back up into this area, but dangerous due to the ground and mud. It was an easy choice to just throw my boom off to the side and winch out. The benefit of this is my boom height allowed the rear to be lifted at the same time to clear all the wood they had cribbed up.
Once I cleared the make shift wooden ledge, I was able to winch it out in a controlled path and once free, the driver was able to take it the rest of the way. Short and sweet, but still fun. Hope you guys enjoyed!
Don't forget to head to www.pepestowla.com/shop after the video and grab your cool Pepe's swag to represent your favorite tow company!
►All footage was shot with my DJI Action 4. I also edit my own footage using DaVinci Resolve Studio.
►My company logo and intro/outro graphics were created by / sa.creations
►I purchase my rigging equipment from: baileystowinginc.com/main.sc
► The wireless headsets that I use on all my rotators:
setcomcorp.com/industrial-mul...
► Buy your own Guardian Angel Device just like mine here!
www.guardianangeldevices.com/...
►Get your Pepe's Merchandise here: www.pepestowLA.com/shop
►Instagram: @pepestowing
►Facebook: / pepestowingla
#rotator #recovery #heavyrescue #dji #heavywrecker

Пікірлер: 78

@nbrowser 9 ай бұрын

It's always a great day when Josh and Hulk come out to play!

@DeenChuck 9 ай бұрын

Yay! Josh and Hulk, winning! I love the way you talk us through it.

@cashtimevideo1501 9 ай бұрын

Hulk comes to the rescue once again! 😄👍

@gavinperry7237 9 ай бұрын

What is involved to get mud off of cables as they spool back onto main reels ?

@Mr.XYZ6775 9 ай бұрын

Good and excellent use of the boom height to get the truck out and miss the wood forms.

@ariedekker7350 9 ай бұрын

You can give even relatively simple jobs an extra charge. I think it's nice that you take the followers by the hand.

@adamt4742 9 ай бұрын

easy work there, Hulk didn't even break a sweat on that one

@rudylerma3042 9 ай бұрын

Another great professional job Josh keep those videos coming!

@richardstine6560 9 ай бұрын

Why a little ol truck like that Hulk doesn’t even break a sweat!! 😂😂😂

@EssGeeSee 8 ай бұрын

There’s nothing like playing in mud. Great video Josh. Thank you.

@edwinschlee8374 9 ай бұрын

Good job Josh getting him out!

@kevinkenyon7045 9 ай бұрын

Josh another great job! Thanks for sharing! Kevin

@barbannco 9 ай бұрын

good to see you back on Hulk Josh.....🙂

@jmiller8083 9 ай бұрын

Perfect as always. Keep up the great work Josh.

@slimwantedman6694 9 ай бұрын

Good afternoon from Southeast South Dakota

@Feline_Frenzy53 9 ай бұрын

Nicely done, Josh and Hulk! Stay safe!

@fishpolice150 9 ай бұрын

Great recovery Josh well done 👏

@TheVitorgoncalves 9 ай бұрын

good job .....

@briananderson8733 9 ай бұрын

You make it look so easy !!!

@jeffryblackmon4846 9 ай бұрын

This was a great well-done job. Thanks for bring us along to witness the job.

@SandraRamirez-wu8vv 9 ай бұрын

That was beautiful!👍 ❤️te aventates!!!👏👏👏 Stay blessed 🙏

@kelleyunofficial3269 9 ай бұрын

Greetings from south central New Mexico. 3 PM 102 F. A toaster is dry heat too, but look what it does to bread.

@bgmckddy 9 ай бұрын

*Easy*!! And, no mud on Hulk!!

@user-zu5lm3ls3m 9 ай бұрын

Keep up the good work the Hulk looks Awesome 👍

@harryscott9533 9 ай бұрын

Another awesome job 🤓🙋‍♂️👍

@deanspagnolo4976 9 ай бұрын

Nice job well done Great video

@thomasfraioli5797 9 ай бұрын

Dude you are amazing at your job, you have a great company with your dad God Bless

@Ray69Smith 9 ай бұрын

Josh you make it look easy as in easy $$ lol👍👍👍

@jorgenegrete7494 9 ай бұрын

Great job😅

@jamesmullin6371 9 ай бұрын

Great job, like always.

@daveanderson2865 9 ай бұрын

Sweet having the rotator. It's able to lift the load and make it feather light.

@rayleyva1830 9 ай бұрын

Easy great job well done as you say papitas say Hi to papi chulo JOE ❤

@mrjonnyjones 9 ай бұрын

21:29 Josh ‘Borat’ Acosta 😂 Great job dude! 👌🏻

@fishhaulergreatlakes8208 9 ай бұрын

Ryder kept me busy in Chicago, tire road services

@ahhadon59 5 ай бұрын

That was pretty cool to watch! 🙂🙂

@vaughnbluejr5960 9 ай бұрын

That mud looked like Mississippi gumbo.

@derekperkins8158 9 ай бұрын

great job, man..lol

@tristanconnolly5675 9 ай бұрын

Nice.

@timteevin4517 9 ай бұрын

Nice of you to not up the forms. Most guys would have just yanked on it.

@PepesTowingService 9 ай бұрын

That’s exactly why I used the boom vs the deck winch, to protect the wood forms

@eddieherrera9504 9 ай бұрын

BROOO WTF I was working at that site and you went when I was pulled off to another NOOOO omg I can't believe it 😂😂

@PepesTowingService 9 ай бұрын

Hahaha no way, the same day too?

@eddieherrera9504 9 ай бұрын

@@PepesTowingService The guys that you were helping were the furniture installers for cubicles, we were waiting on them to install the cubicles so we pulled off for 2 days so they can handle it and wont be in there way. I was on site for the past 2 weeks before working on our scope of work. Im a low voltage cable installer aka network cables, wifi, cameras etc. That wouldve been cool to finally see you and hulk in action in person....next time...good shit tho!

@eddieherrera9504 9 ай бұрын

@@PepesTowingService btw those "apartments" are all USC dorms, that lot is all USC, we are all working for them there

@PepesTowingService 9 ай бұрын

@eddieherrera9504 haha nice. It was so busy this day I had to do this instead of sending one of the wreckers, but with how much work I do in La bound to run into hulk some day

@eddieherrera9504 9 ай бұрын

@@PepesTowingService Nah bro I've seen every other truck you got except for Hulk lmao 🤣 I've seen the roll back and wreckers so many times but you in hulk never....but one day

@hughgautier3894 9 ай бұрын

Attaching to a welded liftgate support isn't the brightest Idea, Josh. While it might be an expedient way, it can also pull that entire liftgate off of that truck. The reason I say that was it happened to Budget Truck Rental in Fort Walton Beach, FL. We found that if you attached to a solid area of the rear axel iit worked better. You got lucky although it also looked like the liftgate was raised above the flat area isn't.

@PepesTowingService 9 ай бұрын

Zero chance of harm. I mean you can literally see at the end. Attaching to where you said wasn’t a good option here because I didn’t just need a horizontal pull I needed a vertical one to clear the wood.

@user-ix4dl1dy7q 9 ай бұрын

Only reason I would come to California is to visit your team

@danthegreat9790 9 ай бұрын

@@user-ix4dl1dy7qyou can go to their work site and take pictures of their rigs if you ask them

@trickstothetrades1801 9 ай бұрын

Definitely need to be careful pulling from those points. We once had a truck like that and it got stuck in a snow bank. We pulled straight out from the same spot and ripped that bracket that goes up at an angle right out of the frame. 😮

@PepesTowingService 9 ай бұрын

That’s exactly what I went over in my video. It was in mud yes but not buried like a snow bank. That much force would do damage but as you can see here I used the mud to my advantage to float it up and slide it out in neutral. The fact it wasn’t loaded helped too

@trickstothetrades1801 8 ай бұрын

yep totally respect your skill and was just trying to add to the expertise of how well you did that. Thanks for the great videos @@PepesTowingService

@robertfischer4160 7 ай бұрын

Ryder I'm sure is happy to see you pulling on their liftgate. Say what you want but that is not a recovery point. And you should never hook there.

@rickvandusen9271 9 ай бұрын

Yeah, the M100! Impressive but way overkill IMO. Plus overweight in CA, right?

@rustyiron 9 ай бұрын

Given the choice what would you rather winch out of Mud or Ice and Slush?

@user-ub3os3ck6f 9 ай бұрын

Great job bro how much you charge for that work ?

@vbrkovic 9 ай бұрын

prob $2500

@PepesTowingService 9 ай бұрын

I love when people without a clue comment dumb numbers like that. Why would Ryder even call me if I charged even half that ? I personally drive a rotator so every single call I respond to is in a rotator of course. Doesn’t mean I charge rotator rates for every job. I’m VERY competitive with my account rates. If I wasn’t, I wouldn’t have hundreds of accounts.

@glennjukes5581 9 ай бұрын

That company was one of my favorite lease companies when I was in the business. Of course on stuck jobs like this--they going to bill back to the customer.@@PepesTowingService

@jesseford7231 9 ай бұрын

😎👌

@Dan68J 9 ай бұрын

Yeah but could you tow with that M100?

@glennjukes5581 9 ай бұрын

That truck is not an M100-that has a wheel lift on the back. An M100 does not.

@Dan68J 9 ай бұрын

@@glennjukes5581 I know it's not an M100. Josh was telling us how long the boom would be out if it was one. Miller can think their chest all they want but the M100 that have towing capabilities it's only a T-Bar as far as I know. It's big and I'm sure it's a super recovery machine but most places can't afford just a recovery unit, and while you can tow with a T-Bar in MHO it's not the same as having an underreach.

@niallocallaghan5883 9 ай бұрын

Great job Josh fast 👍👍👍

@toddjohnson6806 9 ай бұрын

Hey Josh is the mention of the M100 a hint...😅

@PepesTowingService 9 ай бұрын

Hahahaha definitely not. Impractical for us but it would be cool

@maxmacdonald7174 9 ай бұрын

@nelsonglass6 8 ай бұрын

San Bernardino 3” in one hour then gone

@colinl9018 5 ай бұрын

Nice little filler between the BIG jobs.

@timfox183 9 ай бұрын

There's a mini excavator rite there that would of worked just fine to get it out

@user-yogy67 8 ай бұрын

It's not good place to hook up the track sir.

@robertfischer4160 7 ай бұрын

Say what you want. That was not a recovery point. You need to hook to the frame or axles. Never pull from a liftgate. Never. There's only a few bolts that hold that on. First time seeing the videos and the last

@PepesTowingService 7 ай бұрын

Good riddance. You literally look like an overgrown toe but please tell me more on how to do my job