Рет қаралды 41,813
If your car's windshield wiper does not work, the wiper blades may have worn out. The splines on the wiper trapezoid of my ZAZ-1103 Slavuta car have worn out. Repairing the wipers is possible with a bronze insert, but I decided to install a cotter pin.
Repairing the windshield wiper trapezoid allowed the arm to be securely fixed to it and the windshield wiper works like new.
The procedure for repairing the windshield wiper trapezium is as follows:
- set the wiper arm on the trapezoid to the working position;
- using a small-diameter metal drill, we drill through the windshield wiper arm and trapezoid;
- install a cotter pin (bolt with nut or nail of suitable diameter) into the drilled hole.
▰▰▰▰▰▰▰▰▰▰▰▰▰▰▰▰▰▰▰
Video sections:
0:00 Introduction
0:24 Symptoms of worn wiper blades
0:40 Removing the wiper from the trapezoid splines
0:56 Worn slots on the wiper and trapezoid
1:14 Ways to restore worn wiper blades
1:23 Installing a cotter pin on the windshield wiper trapezoid
2:48 Checking the operation of the windshield wiper after repair
3:18 Conclusion
▰▰▰▰▰▰▰▰▰▰▰▰▰▰▰▰▰▰▰
And in this video I will show you what to do if the wiper does not work (ZAZ, Tavria, Slavuta) • Не работает дворник (З... .
▰▰▰▰▰▰▰▰▰▰▰▰▰▰▰▰▰▰▰
Subscribe to our channel and watch a video on this topic #windshieldwipers, #wiperbladeswornout, #repair, #windshieldwiperrepair.
▰▰▰▰▰▰▰▰▰▰▰▰▰▰▰▰▰▰▰
Our social media channel following the links:
Facebook - / 1147375328749226
Instagram - delo__maste...
Telegram - t.me/delo_mastera_boitsa
Odnoklassniki - ok.ru/delomasteraboitsa
VKontakte - club141674316
▰▰▰▰▰▰▰▰▰▰▰▰▰▰▰▰▰▰▰
Thank you very much for your support friends 💕