Wire And Configure An Encoder To An Allen Bradley Micro850 PLC

Рет қаралды 7,934

Күн бұрын

In this lesson we wire our encoder to our Allen Bradley Micro850 then configure the high speed counter in Connected Components Workbench. The HSC high speed counter can be configured in ladder logic, function blocks, and structured text. In this lesson we show you how to configure it in both function blocks and structured text.
Get the full details of this lesson at twcontrols.com/micro800-conne...
Items used in this video:
PLC Trainer twcontrols.com/plc-trainers
Stepper Trainer controls.tw/steppertrainer
The above links make these videos possible. Please use them!
Support these videos while you advance your skills courses.twcontrols.com/

Пікірлер: 21

@cheblack677 4 ай бұрын

Can you please show how to store a variables value to an array and retrieve them other way around in CCW.

@TimWilborne 4 ай бұрын

I don't think I have done one specifically for CCW but it is the same as Studio 5000, here are some videos to help. kzfaq.info/get/bejne/iNJpobdhl5--o5c.html kzfaq.info/get/bejne/bNuliquJ1LHOdnk.html kzfaq.info/get/bejne/p6p5l9mnrK_LdWg.html

@rishishveta 2 жыл бұрын

Sir for another sme (2nd ) encoder what we need to set changes...? I will use input 2&3.

@coolchef9237 10 ай бұрын

How do you do this on a Micro 820 with HSC plugin. It doesnt have the HSC block it only has the HSCE

@TimWilborne 10 ай бұрын

If I recall it is nearly the same, seems you select a different channel number...it has been a while since I did one with a Micro820.

@kamalkodithuwakku1583 Жыл бұрын

@Tim Ho to change encoder Input points on PLC

@Hankster4265 2 жыл бұрын

Great Vid!....Question....?...Are you able to make a video on setting up security, ie....passwords for PB and screens?... Familiar with FT View security, but scratching my head trying to setup on Micro 800 HMIs.....THX!

@TimWilborne 2 жыл бұрын

Hi Henry, yes, it is on the list for the next set of Panelview videos.

@stephenvaughan6845 2 жыл бұрын

Hi Tim, Could you do a video of how to create buttons on the Panelview 800 HMI to control the PT on a TON in the Micro 820? I'm so confused.

@TimWilborne 2 жыл бұрын

Here you go Stephen. kzfaq.info/get/bejne/bbqnedhju7e7m4E.html

@stephenvaughan6845 2 жыл бұрын

@@TimWilborne Thank you so much. You are my hero.

@rishishveta 2 жыл бұрын

How HSC is assigned for 2 nd encoder? How Hsc1 and 2 both set up with 0-1and 2-3 input ?

@TimWilborne 2 жыл бұрын

No, check the manual but I believe it is 4 and 5.

@rishishveta 2 жыл бұрын

@@TimWilborne thank you sir for responding. But in accumulator valve is not changing...any imp. Parameter need to change in HSC instructions ...? I m using 850 plc.

@jakhotramahesh904 3 күн бұрын

Please convert to chenge audio hindi language

@TimWilborne 3 күн бұрын

I don't speak Hindi. I think there are automatic translators that might help but most don't get it all right on technical subjects.

@svojasakdant2180 2 жыл бұрын

Hello Tim good video, but you not listen my request to draw logic ckt with encoder plug-in module on 850 qwb plc model with hmi design Still my request is in your pending list.

@TimWilborne 2 жыл бұрын

I'm not a wishing well, the schematic would be the same.

@svojasakdant2180 2 жыл бұрын

@@TimWilborne no friend schematics isn't same in case of hsc plug in module

@TimWilborne 2 жыл бұрын

@@svojasakdant2180 Then it sounds like you've already found the schematic.

@svojasakdant2180 2 жыл бұрын

@@TimWilborne yes friend with the help of other friend but still it bounced