Wiring a homemade gsm hog gate controller

No video

Wiring a homemade gsm hog gate controller

Рет қаралды 4,665

Coyote1 Outdoors

2 жыл бұрын

Swapping and wiring a 4g gsm relay for hog trapping

Пікірлер: 27

@KAPPYSTRAVELS 9 ай бұрын

I need to know how to get the IEMI number from the GSM device? I have an AT&T Prepaid card & I can't activate it unless I have the IEMI#

@josecompean5623 Жыл бұрын

Does your popper get super hot ? Because mine does. Any ideas ?

@bobbicuttance7652 Жыл бұрын

Aloha Coyote1, Please can you put a link up for the solenoid and a suitable latch to use? Thank you.

@genesisconstructionllc6553 Жыл бұрын

So I had a RTU5024 controller but it quit working cause cell company said they were going to 5G and i needed a new sim card. Ever since I put the new sim card in I haven't been able to communicate with controller. Any suggestions please?

@clintj2010cj Жыл бұрын

The rtu5024 is not compatible past 3g from what I have seen. You will need to upgrade

@jacobmouton2932 Жыл бұрын

Can you give me some insight on your SIM card? What brand do you use? Thamks

@clintj2010cj Жыл бұрын

Speedtalk $5 month

@djcrash1104 Жыл бұрын

The wiring was pretty easy but I couldn’t get the stupid thing programmed. You have any advice?

@dakotalavergne7527 4 ай бұрын

Same

@jamesbussell3715 Жыл бұрын

Can you please tell me if the gsm comes with a SIM card or how to go about getting one

@Mjelsik Жыл бұрын

Speed talk mobile. $60/year. You can get me off amazon

@BG-bx4ey Жыл бұрын

I wired mine up just like this. Checked it 4 times, hooked up to the battery and it started smoking. I have since checked the wiring 4 more times and it is exactly like you said. Any ideas? Maybe the automotive relay is bad or has a different color coding?

@clintj2010cj Жыл бұрын

What gsm are you using? What was smoking?

@clintj2010cj Жыл бұрын

I have not found an rtu5024 that works with att since the 3G went away.

@clintj2010cj Жыл бұрын

4G GSM Dual Channel Remote Switch Controller, SMS Command Remote Board with Relay Output, GSM-CTL-4G Relay Control Box(US) a.co/d/bUas6VM

@clintj2010cj Жыл бұрын

This is what I am currently using

@Mjelsik Жыл бұрын

This bubba is not wired up correctly. 87a (red wire on relay)is not supposed to be used(just pull that terminal out.) 85 goes to NO and 86 goes to COM on the gsm. That switches the relay on. Power goes to 30 which is blue on the relay and yellow is 87 and that goes to the actuator positive terminal. If you doubt me, the relay has a diagram on it and the actuators and gsm controllers both come with matching diagrams.

@murkman1656 2 жыл бұрын

Whats the purpose of the relay? And whats it supposed to sound like when you call?

@clintj2010cj 2 жыл бұрын

The door popper draws too high of amperage to got through the gsm . It would burn it up. Just a click is all it should make

@pro5754 Жыл бұрын

where did you get the 4g module? do you have name and part #?

@clintj2010cj Жыл бұрын

4G GSM Dual Channel Remote Switch Controller, SMS Command Remote Board with Relay Output, GSM-CTL-4G Relay Control Box(US) a.co/d/bUas6VM

@realtealoutfitters5736 2 жыл бұрын

I can not for the life of me figure my gsm RTU5024 out I put the SIM card in but I can’t figure out how to activate it without a imei nunber so I’m stuck.

@clintj2010cj 2 жыл бұрын

The imei number is on the board if you open it up