Coyote1 Outdoors

Пікірлер

@SaileAway 7 ай бұрын

Very informative thank you

@donniesquires6093 7 ай бұрын

How far down the cable do you load it

@donniesquires6093 7 ай бұрын

How long do you cut the cable to make the beaver snares

@KAPPYSTRAVELS 8 ай бұрын

I need to know how to get the IEMI number from the GSM device? I have an AT&T Prepaid card & I can't activate it unless I have the IEMI#

@DarkskullStudios647 8 ай бұрын

great catch. how did you attach the support wire to the wood and did you just tape it to the snare cable? looks like the support wire is only a few inches long. And is that a eye screw bolt in the wood. thanks

@leilu9431 9 ай бұрын

What kind of SIM card service it needs? Internet, phone calls, text, I am trying to minimize the cost without having extra?

@David-ye8rq 10 ай бұрын

Awesome

@ourbrother8565 10 ай бұрын

What kind of door popper did you use? And 30/40 car relay?

@saltydawg8988 Жыл бұрын

Cheap and simple! Awesome video brother. Getting ready to build one of these.

@djcrash1104 Жыл бұрын

The wiring was pretty easy but I couldn’t get the stupid thing programmed. You have any advice?

@dakotalavergne7527 3 ай бұрын

Same

@josecompean5623 Жыл бұрын

Does your popper get super hot ? Because mine does. Any ideas ?

@David-ye8rq Жыл бұрын

Don’t look to live brother

@David-ye8rq Жыл бұрын

Great job

@djcrash1104 Жыл бұрын

I bought one of these openers and I’m having trouble setting it up. Do you have a good video of the programming? There are a bunch of them on KZfaq but I can’t understand what they are saying…

@jamesbussell3715 Жыл бұрын

Can you please tell me if the gsm comes with a SIM card or how to go about getting one

@Mjelsik Жыл бұрын

Speed talk mobile. $60/year. You can get me off amazon

@michaelsawyer7029 Жыл бұрын

I have Verizon, I want to build this, ty so much for this video, would I need a Verizon SIM card?

@stephen5174 Жыл бұрын

Awesome catch

@bobbicuttance7652 Жыл бұрын

Aloha Coyote1, Please can you put a link up for the solenoid and a suitable latch to use? Thank you.

@conrad6301 Жыл бұрын

Where did u get that car relay

@clintj2010cj Жыл бұрын

Amazon

@conrad6301 Жыл бұрын

EPAuto 30/40 AMP Relay Harness Spdt 12V Bosch Style Is this the correct relay

@genarovallejo1986 Жыл бұрын

Hi where I can get the SIM card?

@jacobmouton2932 Жыл бұрын

Can you give me some insight on your SIM card? What brand do you use? Thamks

@clintj2010cj Жыл бұрын

Speedtalk $5 month

@genesisconstructionllc6553 Жыл бұрын

So I had a RTU5024 controller but it quit working cause cell company said they were going to 5G and i needed a new sim card. Ever since I put the new sim card in I haven't been able to communicate with controller. Any suggestions please?

@clintj2010cj Жыл бұрын

The rtu5024 is not compatible past 3g from what I have seen. You will need to upgrade

@BG-bx4ey Жыл бұрын

I wired mine up just like this. Checked it 4 times, hooked up to the battery and it started smoking. I have since checked the wiring 4 more times and it is exactly like you said. Any ideas? Maybe the automotive relay is bad or has a different color coding?

@clintj2010cj Жыл бұрын

What gsm are you using? What was smoking?

@clintj2010cj Жыл бұрын

I have not found an rtu5024 that works with att since the 3G went away.

@clintj2010cj Жыл бұрын

4G GSM Dual Channel Remote Switch Controller, SMS Command Remote Board with Relay Output, GSM-CTL-4G Relay Control Box(US) a.co/d/bUas6VM

@clintj2010cj Жыл бұрын

This is what I am currently using

@Mjelsik Жыл бұрын

This bubba is not wired up correctly. 87a (red wire on relay)is not supposed to be used(just pull that terminal out.) 85 goes to NO and 86 goes to COM on the gsm. That switches the relay on. Power goes to 30 which is blue on the relay and yellow is 87 and that goes to the actuator positive terminal. If you doubt me, the relay has a diagram on it and the actuators and gsm controllers both come with matching diagrams.

@pro5754 Жыл бұрын

where did you get the 4g module? do you have name and part #?

@clintj2010cj Жыл бұрын

4G GSM Dual Channel Remote Switch Controller, SMS Command Remote Board with Relay Output, GSM-CTL-4G Relay Control Box(US) a.co/d/bUas6VM

@jacksprat7087 Жыл бұрын

Hey I’m here at my place south of Locust grove on spring creek for 2 weeks. Come by for a snort and to talk about hog traps. I can provide my phone number or email here if you want. Or go to the hardware store in LG and ask Burll, the owner.

@fjb4932 Жыл бұрын

"The only good rat, is a dead rat." . . .

@realtealoutfitters5736 Жыл бұрын

I can not for the life of me figure my gsm RTU5024 out I put the SIM card in but I can’t figure out how to activate it without a imei nunber so I’m stuck.

@clintj2010cj Жыл бұрын

The imei number is on the board if you open it up

@trevorturk7473 2 жыл бұрын

How did you get the sim activated. ATT and Tracfone both said they won’t do it for the RTU

@murkman1656 2 жыл бұрын

Whats the purpose of the relay? And whats it supposed to sound like when you call?

@clintj2010cj 2 жыл бұрын

The door popper draws too high of amperage to got through the gsm . It would burn it up. Just a click is all it should make

@murkman1656 2 жыл бұрын

Whats the point of the relay? Isnt the cellular device a relay?

@hughroughley3363 3 ай бұрын

It's the same as using a relay in your car to control driving lights, etc. The control unit only has a small amount of current, so you use that output to activate the relay (think of it as an electrical switch) to allow high current to flow from battery directly to the actuator (door popper). You are using small current to electrically control bigger current. The control unit would not be wired to handle 30/40 amp current draw of the door popper. It's circuit protection and reliability.

@hughroughley3363 3 ай бұрын

Also to have a control unit capable of handling 30/40 amps would cost a lot more than the unit this guy is using.

@hughroughley3363 3 ай бұрын

Unit has small current output. So you use a small output to control a larger current via relay. Also protects control unit from massive current draw and burning out if there is a malfunction with a seperate component of the system.

@hughroughley3363 3 ай бұрын

Current output and device protection

@papajonn87 2 жыл бұрын

Thanks for the post bru

@murkman1656 2 жыл бұрын

Dude we needthe wiring diagram

@clintj2010cj 2 жыл бұрын

I made a video on the wiring

@gachaqween338 2 жыл бұрын

Im the 1st one to comment 😑😑😑😑😑

@aarongaytan7382 2 жыл бұрын

Need wiring diagram

@hughroughley3363 3 ай бұрын

12v goes into control unit. Outputs of unit are NO, COM, NC. This means that COM =Earth or negative, NO = Switch is off until activated. NC = Switch is on and then turns off when activated. So you want 12v power into unit, output would be: Negative (COM) to Pin 85 of relay, Positive (NO) to Pin 86 of relay, Battery 12v positive to a 40 amp fuse then to Pin 87 of relay, Relay Pin 30 to positive wire on door popper, Battery negative to negative wire on door popper. You are using a small electrical input to control a larger electrical current via the relay. Clear as mud? 😂 Hope it helps

@stevefischer585 2 жыл бұрын

thanks for replinyhow far up are sides of t triggers from bottum took me lot ofyears could never get them to go in read because minks whiskers hit triggers stopped deadnomatter what bait was in used to trapin kind of a hollow stem grass andcaught themalong ditches one thing learned had muskrat house set up was camoflouged good butsome reason wind made 1 in bare that buck mink slammed brakes would not go in thanks

@stevefischer585 2 жыл бұрын

boy thats big mink for where your at but with all that food how did you have triggers ontrap

@clintj2010cj 2 жыл бұрын

That is an average size for buck mink here. Trigger is set in a T-shape at the bottom of trap opening.

@KKITTRELLKEV 2 жыл бұрын

Wht are the numbers on the relay I can’t read they aren’t clear?

@frontiercountry1 2 жыл бұрын

Does your door popper trip your relay a lot? I used a 30amp inline fuse and it seems every two gate sets it pops the fuse

@josecompean5623 Жыл бұрын

I had to use a 40 amp fuse and it stoped popping

@minktrappingpaddy 2 жыл бұрын

That is very cool. I've seen similar set ups before but with a fishing weight added to the cable. When the rat gets caught and struggles, the weight gets released and pulls him off the beam, then sides down the cable, and tightens the noose more, and subdued the rat quicker.

@virgiltonasket1491 2 жыл бұрын

Can you show how you wired it all together.

@lesiamalencore4741 2 жыл бұрын

Will it take off old wax too?

@johndelay4267 2 жыл бұрын

I wanna try this ! How big is the loop and how high off the ground?

@jpbumgardner1942 2 жыл бұрын

What's the mix on your neutralizing solution after the acid?

@rachel81962 2 жыл бұрын

What do you do with the left over acid solution , had to get rid of it properly , can't just dump it out

@rachel81962 2 жыл бұрын

Takes a lot longer about 3 day soak but you can do the same thing with white vinegar and not have the danger or the problem with getting rid of the mix.

@clintj2010cj 2 жыл бұрын

Vinegar takes alot longer. Time is valuable to me

@tcwaterdrill 2 жыл бұрын

Covote 1, great info here, thanks. looking on E-bay a see a lots of the RTU5024 GSM Gate Opener for sale but they do not say if they are 4G or 3G. Does the 4G have another number other than 5024 or is it just the sim card that you buy? I do not understand 3G or 4G thanks. Please help.

@colbyaugustine3767 2 жыл бұрын

Hello I’m having a hard time getting the gsm part to work any advice?

@clintj2010cj 2 жыл бұрын

Make sure you have signal for the setup

@BLACKRIFLEREVIEWS 2 жыл бұрын

Never release Armadillos back into the wild or relocate them, dispatch them Armadillos do carry diseases. In fact, one of the most common diseases that are often found in armadillos is leprosy. The link between human infection and armadillos is a proven fact, In Louisiana alone, 53% of armadillos were found to have leprosy. for this reason, I trap & Dispatch the Armadillo then burn the armadillos remains in a burn barrel.

@clintj2010cj 2 жыл бұрын

I don't release them. Out of the last 1000 or so I have caught, most are infected.

@TheGolfinj98 2 жыл бұрын

Where do you get those trap doors or how did you make them for the middle trap?

@kennethhuff7158 2 жыл бұрын

Do you treat them someway to stop rust?

@clintj2010cj 2 жыл бұрын

I paint them

Ең жақсы KZfaq

Пікірлер