Рет қаралды 1,747
Hello guys.
This time I wanted to reach the target of triple digits on 3s with my WLToys 124017 chassis.
This is probably the best chassis I ever arranged on WLToys 124019/17 base.
It's well planted on the ground and I did not experience any backflip since I designed the new front wing. There's a little squirm on the rear, but that is a little trickier to get totally rid off, due to the light weight of the car, and the extra power on high speeds.
The whole setup is composed by:
- 3D printed ground effect wide front wing, adjustable.
- 3D printed rear wing profile, adjustable.
- 3D printed wide straight sidebands.
- Stiffened rear suspension with double spring.
- High rake. (rear higher than front)
Electronics:
Motor: SurpassHobby Rocket V3 4.5t 7700kv, sensored
ESC: Castle mamba X, 2-6s with datalogging
Transmitter: Noble Flysky NB4
Receiver: FRG4S
Gearing:
Stock 44t plastic spur gear.
Stock 27t metal pinion gear.
Lipo Battery:
Alienmodel 3 cells, 11.1V 2200ma 120C
Tires:
Matrix foam tires 65mm diam.
Here's a link where you can get the new WLToys 124017 v2:
shop.makerfire...
use my code ViCatRC to save 5% OFF