Wnew Mitre Guage From Banggood, Is It Accurate?

Рет қаралды 10,683

Күн бұрын

To receive 10% off across the evolution range simply use the code GRUMPYS until 30 JUNE. As of the 1st July this will drop to 5%.
90 Degrees Positioning Ruler:
discount code-BG4c87d9
m.banggood.com/90-Degrees-Pos...
Upgrade XK-2
discount code-BG7534c1
m.banggood.com/Upgrade-XK-2-P...
Wnew Miter Gauge
discount code-BG40b81c
m.banggood.com/Wnew-Miter-Gau...
Aluminum Alloy Parallel Guide
discount code-BG6086de
m.banggood.com/Aluminum-Alloy...
VEIKO 2 Set
discount code-BG11ac4b
m.banggood.com/VEIKO-2-Set-Qu...
VEIKO 45 Degree Miter
discount code-BG5c8686
m.banggood.com/VEIKO-45-Degre...
VEIKO 300x200mm
discount code-BG04f56d
m.banggood.com/VEIKO-300x200m...
VEIKO 100mm/4Inch
discount code-BG286e28
m.banggood.com/VEIKO-100mm-or...
VEIKO 600mm Aluminum
discount code-BGfa9aa3
m.banggood.com/VEIKO-600mm-Al...
Banggood Woodworking Festival:
ban.ggood.vip/11Fyk
Below is a link to Evolution's site, Use the code GRUMPYS To get 10% off until 31st May & from the 1st June thereafter it reverts to 5%. Only one discount per customer.
aspireiq.go2cloud.org/aff_c?of...
If your not already subscribed to the channel I would appreciate it if you would consider subscribing.
I'm also on Instagram now so follow me if you like / grumpys.workshop
www.starbond.com/?rfsn=551737... starbond ca glue use code grumpy for 10% off
garagefloorsdirect.co.uk
Use the code GRUMPY5 all in capitals to get 5% off
Here is a link to my amazon storefront with all my affiliate links where you can check out all the tools I use, consumables, paints and finishes & other recommendations. Anyone who makes a purchase through one of my links earns me a few pennies but doesn't cost you any extra. This is a great way to help support my channel
www.amazon.co.uk/shop/grumpys...
Here is my new channel regarding my wife's condition. she was recently diagnosed with small cell lung cancer and brain metastases & has been given 1-2 years to live. On this channel I will be letting people know what's happening on our journey.
/ @meldaveslife
Here is my PayPal link for anyone who wants to make a donation whether it's to help out with travel expenses, buy me a coffee or even towards this channel. I'm giving this out as it's been requested by a few different people.
PayPal.me/gworkshop

Пікірлер: 34

@lancomedic 5 ай бұрын

Thank you for the disclosure at the beginning of this video.

@samrix5793 2 жыл бұрын

Nice video! Great to see you again

@GrumpysWorkshop4 2 жыл бұрын

Thanks mate appreciate that

@benjaqsonworkshop9974 2 жыл бұрын

Great video. Helpful to see practical evidence of how well it cuts. Thanks for posting these videos, they are always interesting and useful. Sadly my table saw slots are too narrow to fit but I'll keep looking for one. Cheers.

@GrumpysWorkshop4 2 жыл бұрын

Thanks mate appreciate that. It's annoying when manufacturers make things different to the standard sizes, makes finding accessories harder

@benjaqsonworkshop9974 2 жыл бұрын

@@GrumpysWorkshop4 yes, very annoying....

@David.M. 2 жыл бұрын

Looks like a decent miter gauge. Thanks for the demo.

@karlpopewoodcraft 2 жыл бұрын

Good review mate 👍

@GrumpysWorkshop4 2 жыл бұрын

Thanks mate appreciate that

@Soilshifter 2 жыл бұрын

I purchased one last year with the upgraded brass handles and I must say I have never had a problem with it.As you described it cuts lovely mitres on my Dewalt table saw,good video.

@GrumpysWorkshop4 2 жыл бұрын

Thanks mate appreciate that. Yeah I love it

@valterleao2798 9 ай бұрын

Parabéns, excelente didática, esses conteúdos só ajudam. Abraço aqui do Brasil 🇧🇷

@trevorb1239 2 жыл бұрын

Great review I'm going to get one as soon as funds permit 👍👍

@GrumpysWorkshop4 2 жыл бұрын

Thanks mate appreciate it. I'm happy with it

@FixitFingers 2 жыл бұрын

Good enough for most folks I'd say!

@tonyworkswood 2 жыл бұрын

Good review and demonstration Dave. I think I'll invest in one it looks really well made. Tony

@GrumpysWorkshop4 2 жыл бұрын

Thanks mate

@potteryjoe 2 жыл бұрын

Seems to be more than precise enough for my level of work. One of these would at least rule out ONE problem. Thanks for the video

@GrumpysWorkshop4 2 жыл бұрын

I am more than happy with it's accuracy. I struggle doing mitres normally so for me it's perfect. I'm certainly not a professional

@reaper060670 9 ай бұрын

I got one without the fence. That was a big mistake on my part but I will make a nice one from some nice wood once I get a new table saw that lets this Mitre Gauge fit into the bloody slots.. LOL I bought it without knowing it would fit but I'm about to build to top of my new table saw this weekend. I've been making my own home built table saw form older parts and I cannot wait to get this mitre gauge working on it. It is a very accurate gauge from what I've seen on "HOOKED ON WOOD" videos. This Dutch lad Denis did a good video about this mitre gauge last year. He rally goes through the whole set up and testes every angle like a mad man. This Dutch dude has his own website and he reviews only the best tools from Banggood. He won't take anything or review or recommend anything that he feels is bad. Great video my friend. Hope all is well with u these days. I know u have been through a lot over the past 12 months so I'm sending best wishes to u and ur family my bro.. Keep sae and well and keep making this top content too.

@GrumpysWorkshop4 9 ай бұрын

Thankyou so much for the kind words it's appreciated. Would love to see your tablesaw when it's done

@kevinwillis6707 2 жыл бұрын

i have the same guage, its pretty accurate, but the mitre slots on my dewalt saw are a bit rough which affects the cut, i filed a tiny bit off the point on the guage that sits in the preset to allow it to seat properly in the indent. i think for the money compared to other high end guages its good value .

@theswime945 2 жыл бұрын

Thanks for this mate, I'd be tempted to save up for one if only it'd fit the Evolution Rage 5. Grrr. I have a practice piece on the go which involves angles other than 45 or 90 (a first for me) and working them out is doing my head in, let alone worrying about making sloppy cuts. So thanks not least of all for the workflow explanation- as someome who finds it difficult to conceptualise that, I found it really helpful. Cheers.

@GrumpysWorkshop4 2 жыл бұрын

Thanks mate appreciate it. I hear you regarding angles as I struggle with angles too. Could you use a mitre saw protractor. It tells you what to set your angle at. I have a video on how they work. Have a look to see if it would be of any help. If so check my amazon store I have links to aluminium mitre saw protractor. Brilliant

@theswime945 2 жыл бұрын

@@GrumpysWorkshop4 Nice one Dave, ta. I'm getting better at cutting the angles once I know what they are, my problem is working them out in the first place. I'm not thick generally but I struggle with maths (failed CSE in 1987. Twice). At the moment it's all smaller pieces, measuring and measuring, cutting and taking pieces to the sanding disc and eyeballing, which kind of works to get the angles if I use a million screws to true it all up. Doesn't feel very elegant but I'm learning, which feels good. Cheers!

@GrumpysWorkshop4 2 жыл бұрын

@@theswime945 I failed everything at school especially maths. I really struggle with anything involving numbers, angles, measurements so you're not alone. The mitre saw protractor is great if you need to find what an angle is. If you're not sure what the angle is then I can't be of any assistance lol. Like you I don't consider myself stupid but I definitely feel stupid at times. Stick with it mate

@theswime945 2 жыл бұрын

@@GrumpysWorkshop4 Thanks mate. I'll let you know how it goes... Cheers

@TheFazer1992 Жыл бұрын

There is a mitre bar that's sold on Etsy that fits the drillpro/WNEW mitre gauge for the rage 5. However I must say that for me I couldn't get it to be square so naturally all the angles are also off. This could be a issue with my own stupidity, or the gauge but until I can test it on my mates normal mitre slotted saw I'm gonna go with the printed bar being wrong. I had bought the same bar for the standard mitre gauge which is fine. And all I've ended up doing is sticking the fence of the WNEW on that gauge.

@peterwilliams6188 2 жыл бұрын

Great video, thank you. I need to buy a table saw, would you mind telling me which make and model of saw you use please? Thank you. Peter

@GrumpysWorkshop4 2 жыл бұрын

Thanks mate appreciate it. It's a dewalt 7491. It's the bigger brother to the 745. It has much larger table & bigger rip capacity. Fantastic saw but I'm wanting to upgrade to one with an induction motor. The dewalt is so loud with no soft start