Wood carving for begginers, all diffrent types of carving burs, part 2

Рет қаралды 147,738

4 жыл бұрын

In this video Wood carving for begginers i show all my "GO TO" burs and how they work on a piece of wood for the begginer wood carver. Part 2
I use the black and decker Rtx rotart tool and it is listed below, with other tools i use and suggest
Black & decker rtx 👇
amzn.to/2R00mXQ
amzn.to/2T1LPOb
Www.patreon.com/carvingfusion
Kutzall
carving burs I use link,
👇
Use code: CFUSION to save 5% on burs and disks
kutzall.com/?aff=24
"I am a Amazon partner"
Amazon
Knock off foredom
amzn.to/36LhlUD
Amazom
A lower budget rotory tool and flex shaft that will get u carving,
I have a few of these and suggest them to someone that wants to try power carving.
Wen rotory tool
amzn.to/2R7cfvb
Amazon
Foredom foot speed controller pedal
amzn.to/36LZXPC
Amazon:
Wood burner
amzn.to/2TcUcqf
Amazon:
Aluminum cutting burs
amzn.to/2T2iQtD
Amazon
Small detail cutting burs 20pcs
amzn.to/303DavU
Amazon
Emery cloth sandpaper box set
amzn.to/2QYS3M1
Amazon
Dremel flex shaft
amzn.to/36Gmays
etsy.me/2Usrss6
/ carving_fusion
/ carvingfusion

Пікірлер: 188

@Daviddickson 2 жыл бұрын

Thanks for this. As a jeweller for 45 years I'm used to rotary bits and burs, but now I want to do some wood carving and you've given me a great intro into what works. 👍👍

@SpadeAce 3 жыл бұрын

Thank you kindly, don't be so hard on yourself for a live mess up- this wasn't scripted, it wasn't practiced, it was just raw information and I love it. Thank you for your video! :)

@CarvingFusion 3 жыл бұрын

Awesome thanks spade

@billyshake 3 жыл бұрын

Man, even when you say you're having a heckuva time talking, you're really helpful. I dig your explanations and they've saved me some serious mistakes. I appreciate you.

@CarvingFusion 3 жыл бұрын

Awesome thank u

@muhammadiqram7851 3 жыл бұрын

Walekum ji kar Bade bur chahie yah bus kitne ke Milenge ji pura setup jaaiye setup pura set Johnson are bus karne chahie Mere Pani Rata Kijiye Pakistan mein mangwana hai Punjab Mein Hamara Suraksha Kijiye Hamara number hai Sirf Tumse 614 Burai Meherbani Hamara phone number hai hum Sarafa kijiye Humne uski jarurat hai

@jimcricket71 4 жыл бұрын

Who knew burr envy was a thing lol

@kanebassirou4061 3 жыл бұрын

777071173

@mtsinterests3255 4 жыл бұрын

Nothing like education with my morning coffee. Excellent narrative and demonstration of the 1/8 " burrs. This should keep us new carvers happy for awhile. Thanks again for sharing mate. Now off to carve some Easter bunnies! LOL getting a jump on the season.

@nancyjohnson5483 3 жыл бұрын

Jordy, thank you soooo much. I am a total newbie and this answers many of my questions.

@seniorchiefharris 4 жыл бұрын

Great Video Jordy! Since I'm new to thei style of wood carving, I REALLY appreciate this video as it gives me a better idea on which burr to use on different types of carvings! May not seem like much to more experienced carvers, but to 'newbies' like myself...it will safe lots of time, effort and wood to achieve my desired results! THANKS of all you do! SAVE carving to you and yours ALWAYS!

@CarvingFusion 4 жыл бұрын

Thanks kenn

@TheCryptKeeper8 3 жыл бұрын

Thanks for highlighting that some are for wood and some for metal. I'm new to this and that's a really important point.

@chrisbranan2538 3 жыл бұрын

Thank you for this video. I am an absolute beginner at carving, and I found this to be very educational. I subscribed and will be watching more of videos.

@stevegraves2968 2 жыл бұрын

Great examples and demonstration. Good starting points for us beginners. Thanks so much.

@shepherdkings5892 2 жыл бұрын

Thanks man, saved a lot of time for me and anyone looking too get started rotary carving! Most informative vid on all the bits and thier uses.

@MrRobertf222 Жыл бұрын

Great video Jordy, thanks for the demo. Great introduction to carving burs

@kathyk479 2 жыл бұрын

Out of all the you tuber on here I believe your the most honest! Thank you! I'll check out harbor freight and Amazon! ☺

@michaelholey8310 Жыл бұрын

I really like Jordy and i hope hes not offended but he sounds as dumb as me. but thats what makes him such a good teacher because he makes mistakes , drops things and gets mad at himself. It feels like i am there with him. no cut glass accent patronisingly telling me what to do ,it feels more like a mate who loves what he does and wants you to feel that way too. what a fantastic role model. He deserves to do well in life .

@CarvingFusion Жыл бұрын

Awww thank you and you too

@jimrodger5341 4 жыл бұрын

Great vid Jordy, cleared up my confusion between Aluminium and Metal Work burrs, by the way I use a dremel multi chuck does away with collets and the little spanner. Keep up the good work 👍

@pattyrdh1987 3 жыл бұрын

I love your videos. You are a great teacher!

@TitoGriffith 11 ай бұрын

Good Demostration Excelent

@pete2109 3 жыл бұрын

Thanks for showing us that lot mate 👍 its answered a lot of my questions good on ya 👌👌👏

@notyourbro3782 2 жыл бұрын

Just bought my grinder today, thanks for the tips and explanation

@MrRobinest 3 жыл бұрын

Another informative video. I bought a dremel tool came with plenty burs and every time I saw a different shape one I bought it have loads including those kits of metal carvers -I tried them on wood-. I had given up as things I tried were to put it bluntly CRAP! I have now got a centive to try them again and I'm more positive.

@CarvingFusion 3 жыл бұрын

Thanks john, make sure u get some kutzall burrs too

@Juankaartesanias 2 жыл бұрын

Thank you Jordy for showing all the different strawberries and what and how they are used for, you are a genius. It is a pity that in my country you cannot get Kutzalls, and bringing them from abroad is a bit complicated. Greetings from Buenos Aires, Argentina.

@MrLinaalmeida 2 жыл бұрын

go amazon

@iancook3025 3 жыл бұрын

Very helpful information mate, just starting out and this is brilliant info , thanku

@davidisrael6741 3 жыл бұрын

Thank you - this really helped I already own a 4000 going to use it and start carving.

@CarvingFusion 3 жыл бұрын

Awesomeness

@advisorspadespf8192 Жыл бұрын

Thanks Jordy. Great video.

@ParkBuffer65 4 жыл бұрын

Thanks! Very useful video!👍 I know how to cut wood shapes with a chainsaw, but I just started trying it with a dremel!👋

@GodsPoetryProductions 3 жыл бұрын

Great video. I'm expanding my collection with some of your burrs.

@CarvingFusion 3 жыл бұрын

Awesome and be safe

@SpecialSoldier109 2 жыл бұрын

Great video! Thank you for sharing this information.

@MrShovelhead68 3 жыл бұрын

Awesome demo bud

@squidnation1443 4 жыл бұрын

Great video man! Just got onto your channel a few days ago I’m in Langley nice to see a local artist on here keep it up !

@CarvingFusion 4 жыл бұрын

Nice to have someone from the neck of the woods around! Hope to see ur carvings

@evilevilrick 4 жыл бұрын

Find the right foot pedal, I know the feeling, I have 4 of them. I like the little bristle sanders for getting into small deep cuts like beard and eyebrow hairs. They work good for that stuff. Good demo of what cutter does what cutting and how to use them. Thanks Jordy.

@mathewsartstudiohometips8837 2 жыл бұрын

Good

@iplayitall 3 жыл бұрын

great video man very informative and eaasy to understand

@s3pt1c54 Жыл бұрын

I done my first woodspirit Jordy, youve inspired me man

@CarvingFusion Жыл бұрын

AWESOME TY

@s3pt1c54 Жыл бұрын

@@CarvingFusion i wanted to send a picture of it but im a bit dumb with technology

@suecollins3246 2 жыл бұрын

Somebody lent me a rotary tool which I mean to use mostly for wood and this is _so_ useful!

@jorgenj1 3 жыл бұрын

Very good info, thanks

@michaelhollister9987 Жыл бұрын

Great overview, Bravo!

@CarvingFusion Жыл бұрын

Thank you

@MW-yw9bp Жыл бұрын

Very helpful, thank you.

@alecmcdonald4185 4 жыл бұрын

Thanks for the video Jordy, iam forever swapping burrs in my dremel whilst carving thinking wonder if that will cut better. I made your sander! BRILLIANT.

@CarvingFusion 4 жыл бұрын

Thank u and cArve on

@khamltunglut Жыл бұрын

I love your content sir

@mountainviewturning5319 4 жыл бұрын

Very nice great tips

@Julz437 3 жыл бұрын

I ordered some kurzall burrs I'm going to make some cool furniture can't wait.

@CarvingFusion 3 жыл бұрын

Awesome good 4 u

@heartmade9718 Жыл бұрын

Thank you!

@esbenback8839 2 жыл бұрын

I Would realt like The Kutzall Extreme “ flamber “ ( or what you called it ) - I just can’t buy here in Danmark . So please buy me one and bring it when you ever go to Danmark . I Will serve you a Nice dinner and some Wine or Beeer, or Both if you prefere. Best regards Esben Back 😀

@eldonbeyea393 2 жыл бұрын

picked up a sander from Pete, impressed should have done it sooner

@goblin20101 3 жыл бұрын

Very helpfull, u r the man👍

@markduggan3451 4 жыл бұрын

I'm going to be investing in some kutzall bits, once I get my work shed sorted (roof has sprung a leak).

@muhammadiqram7851 3 жыл бұрын

Jekar patpur chahie Humne yah setup chahie Punjab se baat kar rahe hain Pakistan se kitne ka padega yah Hamen aur phone number Hamara ji 306 70 1430 yah number Parda Kijiye Barmer Bani

@MrMRDUGIE 4 жыл бұрын

Great Video Jordy, How about a Video on just How aggressive you can get when breaking a Flex-Shaft

@litahsr.8226 3 жыл бұрын

thanks for the tips

@auntkaren12 3 жыл бұрын

Being a left-handed person, I knew the carving was going to be a challenge because of the rotation of the bits. I haven't started carving yet but wanted to do research about the bits I would need. Your being left-handed is a plus. Thanks for the videos; I am looking forward to learning.

@CarvingFusion 3 жыл бұрын

Wicked karen@ u will have fun

@Rootpuma2.0 3 жыл бұрын

being left handed would be ideal as then the debris is thrown away from you.

@auntkaren12 3 жыл бұрын

@@Rootpuma2.0 husband on standby with blower!LOL

@johnnybx3254 4 жыл бұрын

Great with coffee 👍👏👏

@casperfriendlyjp 2 жыл бұрын

Thank you☺️!

@bhaskarjyotiboruah8694 Жыл бұрын

Really helpful

@cemkocainan1831 3 жыл бұрын

very helpful thanks

@markfw54 3 жыл бұрын

Much appreciated...... I’m a total novice here so this was extremely helpful as I’m ready to order my burrs. I have a brand new Dremel 4000 and waiting for my flex shaft to arrive. You mentioned using a foot pedal, do you have a video on how that is hooked up to the Dremel?

@cutflower36 3 жыл бұрын

Good info. Thanks

@CarvingFusion 3 жыл бұрын

@davidpolley885 3 жыл бұрын

Good handy tips 👍

@CarvingFusion 3 жыл бұрын

Thanks u

@mr.shannon6137 3 жыл бұрын

Have you ever tried router bits for carving? If used incorrectly and maby slightly modified they look like they could be super aggressive. Completely new to carving, the thought just crossed my mind.

@titianjosh30 3 жыл бұрын

I love your videos thanks for teaching me a lot. Can you please tell me how you made that sander for your tool? And what is the best one to use to make points, like the point on a captain letter A?

@CarvingFusion 3 жыл бұрын

Is u go threw my.playlists u can see my sander,

@brianart3674 2 жыл бұрын

I wish we had those kutzall bits here in South Africa. Can't find them here at all.

@sohebr6540 3 жыл бұрын

Thank tou

@markatta948 6 күн бұрын

Helpful information ...... But, how can I get this bits and the dremel here in Ghana.. 😢😢😢

@CarvingFusion 5 күн бұрын

Not sure sorry. Amazon?

@moldcatalin 3 жыл бұрын

What size in us is 6mm shank i have my biax tool

@alexandruionescu3368 3 жыл бұрын

What do you recommend between rotary rasps (Saburrtooth) and carbide burrs (those with bevels for aluminum)? I have ordered exactly the burrs you have here at 0:06 (with 6 mm shaft, for die grinder), because Saburrtooth is not present in Romania, and I should order in Germany. Cost is about the same, but I thought the carbide burrs must be stronger than the rasps. What is your opinion?

@Thefelisfelix Жыл бұрын

First of all..Thanks for clear explanation. I'm a rookie and learning a lot of things from your videos. I also using Kutzall burrs and im very happy! But have a question about Kutzall extreme Taper burr. Because now i need that shaped burr and saw some comments about how bad it is and bended burr photos. Have you ever accidentaly bent taper burr ? or what i can do for not bend ?🤔

@CarvingFusion Жыл бұрын

I myself have never bent a burr, just snug it rite up to the collet and pull it out a few mill and tighten it up. People that bend the burrs probably have them sticking out to far and running there dremel full speed. Hope it helps

@Thefelisfelix Жыл бұрын

@@CarvingFusion Got it. Thanks a lot!

@shirineromankurth1633 2 жыл бұрын

I am just catching up 2 years later.. with your video. Kutzall ( on Amazon) does not sell a pack of 10 anymore😩. But by burr..and the price is🙁🙁🙁. Your video is extremely helpful and well done btw. Thank you

@CarvingFusion 2 жыл бұрын

@weskind7885 3 жыл бұрын

Just came to the comments for the. Ok's. Ohhkayg!

@63clairep 2 жыл бұрын

Great video! I'm a new carver and starting with signs for my community. I'm curious about speed. I'm carving simple signs, like "Speed Limit 15 MPH" signs. I'm working with pressure treated leftovers from my neighbor's decks and fences. Pretty sure some are pine (soft, right?) and no name wood. All have been aged. I can transfer the letters, follow along, but at what speeds do I want to go? I tend to be hesitant to really crank up the speed. Is higher speed better for cutting the letters in or slow and low? (This question may seem simple, but I'm simple and not very confident at this point. Sorry.)

@CarvingFusion 2 жыл бұрын

It's ok so am I, I think it's just good to run your tool what works best for you, the more u do the more u will figure out what works best for ya

@tantrarojo44 Жыл бұрын

Ok my friend

@CarvingFusion Жыл бұрын

@jamieemes4292 4 жыл бұрын

How long have you been doing this Jordy? Looks like you have quite a collection of bits and they're not cheap...

@CarvingFusion 4 жыл бұрын

Hey jamie, about 5 years now

@gmanmarx8705 Жыл бұрын

I am a beginner and i would like to know can you use all of these burs against or with the grain or do i need different types for each one with the grain or against the grain?

@CarvingFusion Жыл бұрын

Nope with these burrs you can cut any way grain u would like

@Barnaby_bo 4 ай бұрын

So you can use metal working burrs on wood?

@CarvingFusion 4 ай бұрын

Yes

@homerodejesus2646 Жыл бұрын

olá, saberia informar algum site onde seja possível a aquisição desse kutzall? Amazon? ou algum semelhante?

@CarvingFusion Жыл бұрын

Yes amazon or kutzall sight

@clebersonkoch4417 3 жыл бұрын

Aonde compro essas brocas?

@JudiMiles 2 жыл бұрын

Description below? I’m not finding it. Does it have your discount code?

@ravenstreasures4312 3 жыл бұрын

How do you clean your burrs to make them last longer?

@CarvingFusion 3 жыл бұрын

Sit in wd 40 over night

@suecollins3246 2 жыл бұрын

Also _very_ useful!

@jhonescobar3437 3 ай бұрын

Como puedo hacerme alas brocas

@petertdav Жыл бұрын

what burrs would you recommend for hard plaster?

@CarvingFusion Жыл бұрын

Aluminum cutting bitts

@stevew585 3 жыл бұрын

Hi Jordy, just brought a Dremel 4000, I'm looking to carve wood spirits, I'm in the UK, I see you use good quality Kutzall bits, they are quiet expensive but I know you only get what you pay for! :) Having said that, I if I were to buy just one or two to start, what should I buy please? KUTZALL has many one their site. Many Thanks

@CarvingFusion 3 жыл бұрын

The flame extream and extream taper

@stevew585 3 жыл бұрын

@@CarvingFusion Cheers mate, much appreciated!

@stevew585 3 жыл бұрын

@@CarvingFusion Cant get these in the UK, only on Amazon UK and cant see these anywhwere??does the shaft have to be 1/8...as some are 1/4?

@hiradzamin182 4 жыл бұрын

Hi ,i have questions for you , i have dremel 4200 & 400xpr and also i have dremel flex shaft after i see your video about kutzall burr i got 2 of them but the shaft is 1/4 and 1/8 , i want to know how i have to fit them in my dremel ? , is there any adopter or flax shaft that i can fit in to my dremel ? Let me know what i have to do please

@CarvingFusion 4 жыл бұрын

U will not be able to use the shaft size 1/4 for a dremel (its to big) But the 1/8 will fit, u have to make sure u have the rite.size collet on the dremel handpiece,

@hiradzamin182 4 жыл бұрын

Carving Fusion By : Jordy Johnson so i have to bye another carving machine ?

@mirmir5504 2 жыл бұрын

What's its price small size bits and machine ,are u order release in kashmir ,but original machine

@kirkrodriguez3 Жыл бұрын

what type dremel rotor are you using? Please

@CarvingFusion Жыл бұрын

I normaly use dremel 4000 also use cheaper ones like Wen or what ever but always worth the dremel flex shafts, most the other ones suck

@Gamerhog2022 3 жыл бұрын

Is your foot pedal compatible with the dremel 4300

@CarvingFusion 3 жыл бұрын

Yup sure is! I would try get a foredom speed control pedal

@Gamerhog2022 3 жыл бұрын

Thanks I'm just getting into carving. All I need now is a few bits and a foot pedal. I enjoy your videos especially that birdhouse video and the memorial piece you did.

@waisonghanse4158 2 жыл бұрын

I'm from Assam west karbi anglong

@waisonghanse4158 2 жыл бұрын

From where will get wood carving burs?

@coryhaines6650 3 жыл бұрын

Can you resharpen the burs

@CarvingFusion 3 жыл бұрын

Would take a long time

@coryhaines6650 3 жыл бұрын

@@CarvingFusion just seams like so much left when they quit cutting. Thank you

@walkingstickwoman 3 жыл бұрын

Why would the burs slide out when I run my drill?

@CarvingFusion 3 жыл бұрын

Most likely need a new collet,

@Rootpuma2.0 3 жыл бұрын

the collets also come in different sizes...you might have got the wrong size shank....get the smaller collet and set for all shank sizes....well up to the largest your tool can handle

@suecollins3246 2 жыл бұрын

You're not closing your collet tightly enough using the spanner provided.

@ellencnixon 3 жыл бұрын

💜💜

@CarvingFusion 3 жыл бұрын

:) thank you

@pattyrdh1987 3 жыл бұрын

Having trouble finding the”link below” for the 5% discount on burs 🤔

@CarvingFusion 3 жыл бұрын

Click the more button

@mamanghekel6425 2 жыл бұрын

oke

@maryjoanhill7847 3 жыл бұрын

@uyenaingyn9278 Жыл бұрын

I want tobuy

@oledevo 7 ай бұрын

@kayakmaccaz9256 3 жыл бұрын

👍🏻👍🏻👍🏻👍🏻👍🏻🇬🇧

@user-fu4sq2ty4t 3 жыл бұрын

ارجو التوضيح بالعربي

@leongt1954 3 жыл бұрын

Finlay found a distributor here in Aus that sells the kutzall burrs only problem is they are $30 a burr and the prices have risen because of this virus shit and thieves on ebay are asking $300 for the Dremel 4300 and $80 for the flex shaft

@CarvingFusion 3 жыл бұрын

Brutal

@MegaThemaris 2 жыл бұрын

How many times did you say OK??? 🤯🤣🤣🤣

@CarvingFusion 2 жыл бұрын

Not to sure did u count for me? :)

@judy-anncabaron8636 3 жыл бұрын

where can i buy that things

@ftumi 3 жыл бұрын

Amazon

@peepas2633 2 жыл бұрын

Why don't any stores sell these bits :'(

@CarvingFusion 2 жыл бұрын

Amazon

@waisonghanse4158 2 жыл бұрын

I want Wood carving burs

@ranepurahewagegayanindika3985 3 жыл бұрын

How to tek it

@justintyme4690 3 жыл бұрын

Just ordered a very course tungsten carbide sphere through fine grit sphere and I got a tungsten carbide 10 set kit

@CarvingFusion 3 жыл бұрын

I would get a kutzall extream flame bur, game changer

@justintyme4690 3 жыл бұрын

@@CarvingFusion that's my next buy. I'd like to eventually get a set, but I gotta start somewhere. I'm working on making a wooden kitchen utensil set for my mom