Great video, remember if the chimney is over 5' out of the roof you need to brace it. I'm sure your video will help lots of DIY homeowners.

Awesome video & great info. We just bought a Manufactured home & are going to have to install a wood stove before winter hits, as the city we moved to has the HIGHEST electrical rates in ALL of WASHINGTON STATE! So...NO furnace for us! Your video has everything we need to know & your 20+ yrs of experience is just what we needed to feel confident that this will be our "GO TO" video for our install. THANK YOU so very much for sharing this with all of us & it is great to know...that if we need anything, any part...that you offer it in your store & can ship it to us :)

thanks for your video, you did a good job of explaining. Im an electrical contractor and noticed one itsy bitsy little thing, i only mention it because you are a guy that likes to do things right, plus so many people watch this and they can learn that when you staple a wire down that it should be flat against the wood. you had it on the wires edge which can cause trouble, or damage. so, flatten the romex against the wood. thanks

Love the video brother. EXTREMELY helpful as I’m about to do my first install in my very first home. This was a perfect example for me I appreciate it a ton. Very descriptive with great zoom in shots of exactly what’s being done. You rock brother 🤘🏽

Great video, good explanation of what needs to be done, I have lived in my house for almost 11 years and just found out my piping is upside-down, I needed to get a good idea of what I was getting in to before I took it apart, I now am confident I can take care with no problems

Cool man! Thanks for the kind words!!!

great points on installing the stove pipe

Great install and video man. I am a gas fitter in Canada.

Great video. Very detailed. Thanks for posting.

Helpful!

Great vid. Shouldn't there be the two metal bars to hold the top of the roof pipe in place--more sturdy?

Thanks for the video.To put tile on the wall behind the stove I have cement board and tile /thinset. Do I need an air space behind the cement board or can I put directly over my sheet rock wall? Thanks for your help.

Nice job water boy

on the ventilated flashing for wood stove in your video, is that type of ventilated flashing also used for direct vent gas fireplace? what is the function of ventilation for flashing? doesn't it set up for moisture issues?

A1 job well done

Nice job guys

Thanks for that video bro.

Thanks for the video. I do have one question. How is it that you are able to get 1 inch clearance off your insulated pipe? Most of what I see is a minimum of 2 inch clearnance from combustibles. Is it because codes have changed since 2013 or am i missing something? Thanks again

Very helpful

The one thing thats hard to tell in the video, at 7:40 , that doesn't look 18 inches away from the walls you have up. 'Maybe' a foot it looks. Oh don't worry, with that setup, you ain't starting any house fires or anything awful. Just if you have to abide by any codes or anything, they might get onto ya if you're using that single wall pipe. All the 2 yr olds with bashing comments are essentially saying the pipe connecting to the chimney box, is too close to the wall. But in reality, you can't really see if its 18" away or not in the video. Honestly, if you was worried, I'd just put a metal heatshield where its that close, and you'll be fine. I like the install myself. Perhaps a shield to protect your drywall, and you're fine.

I realize this his then internet and everyone’s an “expert”..having said that without repeating what others have noticed…when installing the flashing in the roof never put a solid bead of sealant on the bottom side. It won’t allow any trapped water to flow out from under the chimney flashing.

Can you please tell me where you got the roof flashing im having a hard time finding one that has the same diameter as my pipe? than you very helpful

Nice! So I take it you can cut the interior pipe to length?

Does all double wall pipe fit into ANY ceiling box? Ceiling box was installed when the house was built in 1997 but it is time for new pipe. Do I have to install a new ceiling box if the old one is still in good condition?

@ 6:40, Metal Fab, huh..? That's one of our customers we sell the metal to.. cool!

An air space is better! Also it will depend on what the clearence is for your Wood Stove to a combustable wall?

Good video

I would still like to know how much to expect to pay for a pipe install. Guess I could call around, but was just wondering.

Why no air damper in the single wall pipe? I always install them. Also that chimney needs another section of pipe with a roof bracket to pass code in my area.

Nice Video. We do things very differently in the UK.!

Thank you ❤

what kind of silicone did you use around the storm collar?

What do you use for the walls? So it doesn't heat?

I want to install a fireplace insert where we have a wood stove now. I will be opening the concreted fireplace opening. I know i will need a lining for the chimney too. How much of the work can I do myself and what should I get a professional to do or inspect?

Would it be overkill to install a masonry wall around 4 inches in the attic? And use the box inside....

did you spray paint the stove and the pipe or ? thanks

What, no damper in the stove pipe? I like how you set the 45º as high as possible, keeping the hot pipe as from the wall as possible.

How long was the installation? Good video.

Could the exhaust pipe be ran out of a wall instead of the chimney or does it have to be out from the ceiling

I want to buy a wood burning stove. I have my furnace chimney but cannot use that then there is a fireplace that i was told when I bought the house I can't use. I think it might have burnt coal at one point. What are my options and how much should i expect for installation? Thanks

Sweet

I want to install this in a two story. Is it possible to maybe use "interior" piping on the second floor to radiate heat into the second floor room also, then just switch back to heavily insulated piping through the floor changes and the roof? Is there anything else I should be aware of in this endeavor? Thank you so much!

Hi I got a question, I bought the imperial wall heat shield the backing was cracked so I added another 1/2 inch durock board to it but then realized I needed to drill a hole for my air vent My question is 1 how close can my 2020 epa mobile home certified stove get to the heat shield and 2 will me going thru heat shield be ok? I do have that other 1/2 inch attached and also have the double telescoping pipes along with mobile home install kit. Doesn’t seem to be any professional showing how to install with the mobile home install kit that I bought from northern tool nor anyone showing how to do the air intake if you have a heat shield so any help or advice will be appreciated as doing this by myself

what kind of screws did you use on top pipe

How high should a 45 degree elbow pipe be above stove?

i have been looking foe videos of putting the support box in and they all cut to the box already in place ! why are they all the same ? thats the part i need

Every course of shingles whose reveal line makes the flashing should be on top of the flashing.

I really appreciate the video and the quality job you did. I do wish you had had someone else operate the camera so we could have watched what you were doing without the continual bobbing around.

Thank you

Wanted to see the inside work - setting the stove and hooking up the single wall pipe.

Do those 2x4 you added to support the chimney box double as the attic insulation barrier? I am planning an install as we speak. thanks for the video

Hey, could you tell me what was the fitting that you used to convert from single wall interior pipe to double wall. Thanks

Thoughts on a wood stove vs. fireplace insert? I'm not sure what to get. I'm getting a pump with electric coil so that should do both the ac and heat. I wanted something to enjoy on the cold winter nights.

What do you guys charge for an install like this one?

looks great on the inside. But code is crazy outside lot of pipe. maybe it's the pitch. But nice work

I'm installing a stove pipe through my window and up the side of my house what would you recommend to us from out the window to the chimney cap? Thanks the Scott's family from North Carolina

Hey! Great video, do you have a list of the kit or parts you used? I've been looking at northline express and it's looking like it's close to $1000 for all the parts. I have a stove and the hearth installed, but no interior stack, ceiling kit or exterior stove pipe. Thanks!

I was,wondering why u didn't install the attic insulation shield? Is it to code?

I wouldn't install these for any amount of money. According to the comments , everyone who watched this video is a chimney expert. And for this guy to put this on you tube , he must be pretty confident he don't the job right!!!!!)

I believe you showed the slip connector upside down

Where did you get supplies from?

Single wall pipe has to be 18" from combustibles, by you elbowing it back towards the corner brings you too close to the wall. Dvl pipe is 6". You should seal around perimeter support box so air doesn't escape. Are you licensed and insured? Who trained you. I have more tips if you would like.

Where did you buy your parts?

How do you know if the chimney pipe locked up under the roof flashing. Is there discernible click when fully locked?

He's not responding to the comments because he died in the fire two hours later.

From the looks of it, this is a 12" diameter pipe flashing. I need one, but all over the web, and local building stores, I can only find 6" diameter... any idea where I can get the right size?

What does an install like that cost? and the fire place cost? looks nice. Who would I check with for codes on this? Thanks

What is total cost for the stove and install? Looks great! Love the clean look of it! 👍

When you staple nail electrical wires, 2 things, the wire should be flat and the staple must not be pinching the wire. Staples must be loose to allow for house movements so the staple doesn't wear off the wire insulation. Hire proffesional people for this kind of projects.

I am installing a wood stove in my garage and there is no attic or crawl space above the ceiling. Trying to figure out how to see what is between the ceiling and the roof... how do you handle situations like this?

How much does getting a install like this cost?

How much $ is an install like this setup?

Does the black pipe meet the roof? Or does it stop inside the ceiling box?

How did you pinpoint the center point in the roof from inside the attic? The center point to cut your hole, that is

I haven't seen a complete installation yet. I watched so many KZfaq videos that claim complete installation but we never see how you guys do the inside.

No insulation sheild ? Box to the roof .

How much would this cost if I wanted to hire someone

Hand it over to a Certified Installer and get him to sign off on same when complete... that way when you sell you home there are no Issues as everything has been done to Code...

Where is the damper? What if they wanted a little more control over the heat however with no damper present that cant be done.

why isnt your box inside attic higher up?...it looks like its been cut too low and beats the purpose of insulation coming in contact with your chimney pie.

Single-wall pipe cannot be installed that close to unprotected walls or ceilings, under NFPA 211 and equivalent fire codes, not to mention the TempGuard installation manual. He said it was 24 inches to center of the 6-inch pipe, meaning the "elbow" offset could be no more than 4 inches, without bringing it too close to the combustible walls. In other words, you cannot safely install the edge of the ceiling box less than 15 inches from the nearest wall, if you're using single-wall connector pipe. If I were inspecting this, I would red-tag it, making it completely illegal to put a fire in that stove until the chimney connector pipe is replaced with double-wall pipe or properly ventilated wall and ceiling protectors are installed (i.e., 9 inches beyond the edge of the box and down both walls at least to the point where the pipe is 18 inches away.

is the 45° angle for reduce the airflow?

There might have been some code violations in this video. But, the comments are filled with misinformation too. If you are going to attempt a DIY wood stove installation make sure to review the building and fire code, and folllow the manufacturer's UL listed instructions. Also, have functioning smoke/carbon monoxcide detectors, fire extinguisher, and a minimum of an annual chimney sweep and pipe inspection. These installs and maintainence have no acceptable margin for error.

Didn't show us how to cut the hole...half the job.

do u need building permit to put a fire place or wood stove?

What was your total cost?

What company makes the chimney flashing boot?

How big was your Hearth?

DL insulated class A pipe has a 2 inch clearance to any combustibles they didn't finish the video for any of you to see the finish project

Is this video from Ontario?

The top goes under the shingles and the REST goes on TOP OF THE SHINGLES SO THE WATER WILL NOT GO UNDER THE SHINGLES ONLY MISTAKE COULD BE VERY COSTLY

Attic insulation shield!!!!!!

come put me one in

Cost?

Silicone? Is it safe? Will not melt?

Know anyone in MA/ RI to install one for me ?

where your 5 point harness your required to wear. while on a roof with in 4 foot of the roof edge. and where were the safety lines as well. that a bigg osha nono.

No roof brace kit ?

“The timber wolf 2200 with legs complete installation chimney pipe stove stove pipe and ready to burn”

attic insulation shield?????????