Woodturning. Sharpening your carbide cutters. Cheap, quick and easy.

Рет қаралды 14,322

Glenn & Liza Teagle Woodturning & Carbide Chisels

7 ай бұрын

In this video I demonstrate how you can sharpen your Carbide Cutters.
To buy any of my Carbide tools or cutters visit my website;
www.ukwoodcraftandcarbidechisels.co.uk
Thanks for watching.
Please Note;
These videos are meant for the purposes of entertainment. Any attempt to imitate or copy what I do must be done at your own risk. My practices may not always be correct or the safest for you. I strongly recommend that you find your own way of turning. You are responsible for your own safety while woodworking. Read and understand the operation and safety manuals supplied with your tools and machinery to ensure you are safe while using such equipment.

Пікірлер: 38

@joediberardino4419 Ай бұрын

Thank you Glenn I am learning a lot from your videos you are the man

@glennteagleofukwoodcraftca5308 Ай бұрын

Thanks Joe. Much appreciated. Glad you are finding the videos helpful.

@mashmade-airth 7 ай бұрын

great videos on sharpening Glenn. This one grabs me the most

@glennteagleofukwoodcraftca5308 7 ай бұрын

Thanks Jim. Glad you found them helpful.

@jerrybyrd7778 7 ай бұрын

Thank you, I always wondered about sharpening carbide. You really showed how easy it is.

@glennteagleofukwoodcraftca5308 7 ай бұрын

Welcome to the channel. Glad you enjoyed the video and found it helpful.

@roberttalluto237 6 ай бұрын

Thank you. This is an excellent video.

@glennteagleofukwoodcraftca5308 6 ай бұрын

Thanks Robert

@les.6343 7 ай бұрын

Thanks Glenn brilliant 😊

@glennteagleofukwoodcraftca5308 7 ай бұрын

Glad you liked it Les.

@lenshandcraftedwoodsigns6033 7 ай бұрын

Thank you, not only do I now know how to sharpen my carbides, but after watching this, I need to work on my cutting angles. I now have a lathe and have turned about 10 pieces. Well 10 reasonably successful pieces anyways. The first several pieces kind of blew apart.

@glennteagleofukwoodcraftca5308 7 ай бұрын

Glad you found the video helpful. Happy turning.

@gazzawhitman1496 7 ай бұрын

Top man now I’ll give it a go 👍

@glennteagleofukwoodcraftca5308 7 ай бұрын

Yes Gazza, give it a go.

@glennrocker2698 6 ай бұрын

Excellent video, thank you you just saved me a bunch of money! Glenn

@glennteagleofukwoodcraftca5308 6 ай бұрын

Hi Glenn. Welcome to the channel. That's what this channel is bout. Helping people with their turning and to help save you a bit of money, having fun along the way.

@oldncarvingJohn 7 ай бұрын

Ah. That's better. Confusion diminishing. 😂😂

@johnsloan6836 6 ай бұрын

Nice one Glen. Just watched your vid on sharpening. What happened to the face shield? All it it takes is one little catch as you know.😢. Regards

@glennteagleofukwoodcraftca5308 6 ай бұрын

Glad you liked the video John.

@Blitz-yn4kf 7 ай бұрын

Thanks for this Was wondering how to do the av carbides. Surprised you don,t to sell make a metal mandrel to sharpen them I have a metal bar which i use for the normal carbides It has a screw which you can adjust to the length/depth of the carbides It apples even pressure across the carbides ( can't remember where I got it from ) But thanks for this

@glennteagleofukwoodcraftca5308 7 ай бұрын

No I'm not not interested in making metal versions. It's so easy to make with wood. Anyone can make them.

@michaelwillson6847 3 ай бұрын

Great information there glen. Can i check am guessing you get 4 turns with your square before sharpen and obviously 2 with the detail and am guessing 2 or 3 with the circles 👍🏴󠁧󠁢󠁳󠁣󠁴󠁿

@glennteagleofukwoodcraftca5308 3 ай бұрын

Thanks Michael. I've been using the same carbides since we started the channel. Not even turned most of them. If you use them to cut, you won't need to even turn them. But yes, the square has 4 sides, yes the Detail two times and the circle about 3-4 times, depends on if you roll the chisel etc.

@michaelwillson6847 3 ай бұрын

@@glennteagleofukwoodcraftca5308 no worries thanks well am binge watching your channel and all your carbide videos to suck as much knowledge out them as I can. Granted relatively new to turning but hopefully with quality tools and quality teaching through your KZfaq videos should make it as a half decent turner one day. 👍🏴󠁧󠁢󠁳󠁣󠁴󠁿

@glennteagleofukwoodcraftca5308 3 ай бұрын

@@michaelwillson6847 Just keep practicing. Keep a look out for tomorrow's upload. It's a good one. One you can do with your Type 3 Set.

@michaelwillson6847 3 ай бұрын

@@glennteagleofukwoodcraftca5308 sweet thanks I'm subbed up so should get notification of it. Will deffo jump ahead and watch tomorrow if you're recommending it's a good one. My lathe isn't massive but think for what I get wood wise and what I can do should be fine

@glennteagleofukwoodcraftca5308 3 ай бұрын

@@michaelwillson6847 It will be perfect for you.

@fergusrb 4 ай бұрын

My question is about detail cutters. I live in California USA and your web site says you don't ship over seas. I just got my 3 piece set from over here. I believe your detail cutters have a bevel on the two sides and one on the tip. Do they have a name so I can search over here for one? I found your site after I ordered my carbide tool set. You make so much sense of riding the bevel to make cuts not scrapes. The detail tool that came with my set has a knife edge on the carbide tip as well as the holder. (maybe that is normally how it is done). Is there a way of putting a bevel on my detail tip or would that muck everything up? I am going to try and contact the people that I got my set from to see if they have a detailed cutter with a bevel on the tip to do push cuts. Also I can see how you can measure square and round cutters but how do they measure detail cutters? When I look at pictures they are shown from above only no side shots to check the bevel. I am starting your 3 tool carbide series again not that I have some tools. Watch rewind, watch rewind ha ha. I think KZfaq has a way of slowing down the videos so you watch for more details. Thanks again for all your videos. Bruce Ferguson

@glennteagleofukwoodcraftca5308 4 ай бұрын

You would have to contact your seller to see if they do the Detail cutter like mine. I can't say whether they will fit your tool. They fit mine. You would have to ask the manufacturer whether you can change the tool. I can not advise you of this. Glad you're enjoying the videos. Move to the UK or if you holiday here, then you can order.

@fergusrb 4 ай бұрын

Oh I can see why you wouldn’t advise with all the laws now days. Guess I will have to fire up the Lear jet and hop over there for a day or so. Wait the climate activists will be on me for creating too much CO2 because I wanted a carbide cutter. I am 77 and don’t give sh$&t anymore. I will check with the manufacturer. Thanks for letting me have some fun with you. Till next time.

@glennteagleofukwoodcraftca5308 4 ай бұрын

@@fergusrb It's all about having fun mate.

@stuarthayes5880 7 ай бұрын

Do you use the same method to sharpen Screwdrivers? Lol😊

@glennteagleofukwoodcraftca5308 7 ай бұрын

I'll be doing it on the next video, just for you.

@robertocoiante1981 6 ай бұрын

Salve Glenn sei straordinario , grazie per tutto quello che condividi con noi: mi potresti dire che materiale è quella piastra con cui ci affili i carburi? Te ne sono grato e di auguro buon anno a te e signora. Grazie Roberto di ROMA.

@glennteagleofukwoodcraftca5308 6 ай бұрын

Diamond Sharpening Card File.