Work Shop Fire Extinguisher - Choosing the CORRECT ONE and Size?

  Рет қаралды 9,183

A Concord Carpenter / ToolBoxBuzz

A Concord Carpenter / ToolBoxBuzz

4 жыл бұрын

Does Your Shop Have The Correct Fire Extinguisher
Purchase Link: shrsl.com/26ueu
-----------------------------------------------------------------
BUCKEYE ABC MULTIPURPOSE FIRE EXTINGUISHER, 10 LBS AGENT CAPACITY 11340
Choosing A Fire Extinguisher For Your Workshop [Website Article - www.aconcordcarpenter.com/cho... ]
Do you have a fire extinguisher in your shop? Is it charged, and is it large enough to put out a real fire?
Woodworking shops are inherently prone to fires for obvious reasons. They contain large quantities of fuel in the form of wood and wood products, sawdust, and flammable materials such as paints, oil finishes, adhesives, and solvents.
Many shops are full of fine sawdust which will ignite and burn far more easily than solid lumber. Add to that that we fill our shops with potential ignition sources, such as potentially faulty electrical wiring, cutting and welding operations, sparking tools, or the potential for static electrical discharges.
WorkShop Fire Extinguishers - Go Big!
Most woodworking ships have a combination of wood, solvents and other flammable liquids plus electrical machines. Because of this, a higher rated fire extinguisher is recommended.
All residential extinguishers are classified A, B, or C (or a combination of these) on the label to indicate which types of fires they are most effective on.
The main distinction among residential fire extinguishers is size, and I think the bigger the better.
Fire extinguisher classes
There are four classes of fire extinguishers - A, B, C and D - and each class can put out a different type of fire. All of these fire extinguishers us a dry chemical multipurpose extinguishing agent.
1. Class A extinguishers will put out fires in ordinary combustibles such as wood, cardboard and paper
2. Class B extinguishers are for use on flammable liquids like solvents, grease, oil and gasoline
3. Class C extinguishers are suitable for use only on electrically energized fires
4. Class D extinguishers are designed for use on flammable metals
Fire Extinguisher Classification Rating
In the fine print on the fire extinguisher label, are letters preceded by numbers - for example, 1-A:10-B:C - this is the extinguisher's classification rating.
All Fire Extinguishers are tested by the Underwriters Laboratory for safety and performance. They are rated based on the type of fire that they will put out, and their classification is determined by the size of fire they will put out.
The UL rating is broken down into Class A and Class B:C ratings. These numerical ratings allow you to compare the relative extinguishing effectiveness of various fire extinguishers. For example, an extinguisher that is rated 4A:20B:C indicates the following:
1. The A rating is a water equivalency rating. Each A is equivalent to 1 1/4 gallons of water. For example, 4A = 5 gallons of water.
2. The B:C rating is equivalent to the amount of square footage that the extinguisher can cover, handled by a professional. 20 B:C = 20 square feet of coverage.
3. C indicates it is suitable for use on electrically energized equipment.
The take away here is the higher the number, the greater the fire extinguisher effectiveness.
My Workshop Fire Extinguisher
This fire extinguisher fights fires common to the workshop such as paint, wood, gasoline & energized electrical equipment. This unit is easy to use and can be recharged. The label on it now says the charge, if not used, will last 6-years.
It’s important that you purchase a quality fire extinguisher for your shop. Make sure it has an easy to read pressure gauge for your shop so you know when to recharge it.
Tip - mount the extinguisher near a door, preferable near the light switch so you can always and easily check the gauge.
There's also a difference between rechargeable extinguishers, with metal valves, and disposable ones, which will have plastic valves. A rechargeable one will cost more, but refilling it once the pressure gauge shows that use or time has depleted the contents is still less expensive than buying a new disposable one.
This is a perfect example of you get what you pay for. Be safe ya’ll and go and get a fire extinguisher for your shop, and if you have one - go check that gauge!

Пікірлер: 23
@BiggMo
@BiggMo 4 жыл бұрын
Nice subject Rob, well covered. One area often under evaluated is mounting location. Needs to be easily accessible “in” a fire and with-in the emergency exit path. I see a lot of shops where it’s mounted near flammables or in a corner that could trap someone if the fire accelerated quickly.
@Pembroke.
@Pembroke. 4 жыл бұрын
Nice, but a helpful tip is to keep a check sheet for monthly inspections. Second tip is to turn the fire extinguisher upside down once a month. This prevents the chemicals from settling in the bottom and it gives you a better accurate reading of the gauge. Thanks Rob
@ConcordCarpenter
@ConcordCarpenter 4 жыл бұрын
Did not know that
@Pembroke.
@Pembroke. 4 жыл бұрын
@@ConcordCarpenter Neither did I until taking a fire safety training course for work, loved the smokehouse and the body drag. Part of the course was going into a demo building filled with smoke, in full gear. This included finding a weighted dummy, then getting it outside and doing CPR, until someone blew the horn - strictly volunteer but I highly recommended it, good times. (I did some work in bush camps for a while)
@davidcotton7927
@davidcotton7927 4 жыл бұрын
If you don’t feel the chemical move, try taping the bottom of the extinguisher with nothing other than a RUBBER MALLET. Doing this every time you change the battery in your smoke detector is a good practice.
@billk.7889
@billk.7889 4 жыл бұрын
I believe the fire extinguisher linked in the video’s description is UL rated at 4-A:80-B:C.
@jude4896
@jude4896 4 жыл бұрын
Good video short, informative and to the point. Thank you.
@jerryjohnsonii4181
@jerryjohnsonii4181 4 жыл бұрын
Thanks for the knowledge about Fire Extinguishers , Rob !!!!!!!!!!!!!!!!!
@pdxlockpicker7796
@pdxlockpicker7796 4 жыл бұрын
Safety is often overlooked. Great video!
@MrTooTechnical
@MrTooTechnical 4 жыл бұрын
great vid. make sure that your furnace power switch has a pilot light like mine. that way you know when the power is on from a distance and you can find it in a hurry. woohoo.
@nebojshapetrovski8052
@nebojshapetrovski8052 4 жыл бұрын
smart advices from smart man aprecciate your channel greetings from macedonia
@Jester1427
@Jester1427 4 жыл бұрын
Class "D" fires are Metals are any metal ending with ending in "IUM" and Zinc. They require a specific agent for each type. No one type extinguisher for class "D" fires.
@HogeN1337
@HogeN1337 4 жыл бұрын
have a 6kg one in the van... they say a 2kg is enough buuut one never know
@dannywening6233
@dannywening6233 4 жыл бұрын
My 2 cents, I have a CO2 & a water extinguisher primarily cause dry chem make a huge mess and will pretty much ruin anything and everything. Both the CO2 and water can leave no residue so in theory if I ever have a small fire the damage will be contained to the point of origin and I won't have yellow powder all over the place.. plus its horrible to breath that stuff in...Even though they are rated for class a fires they aren't very good especially if the fire communicates to a vertical surface. Of course what I'm saying is not advice it's just what my life's experience has tough me
@ironmatic1
@ironmatic1 Жыл бұрын
I like the idea of having alternatives to ABC chem in general. I have a halotron in my house, and also a BC sodium bicarb next to a 2.5 water can downstairs for the reasons of cleanup. But I still think it’s important to have an at least 5, preferably 10 lb ABC available. Simply more raw firefighting available in that bottle. UL 4A wall panel test for dry chem is quite impressive. Couldn’t do that otherwise without a hose line.
@ccadama
@ccadama 4 жыл бұрын
For a fire extinguisher to be rechargeable, the handle and valve assembly needs to be made out of metal. I had one made from plastic and my local fire extinguisher company would not refill my plastic ones. Also, the typical dry chemical used in extinguishers are effective on fires but they will ruin whatever it contacts. Halon 2 fire extinguishers leave no residue but are more expensive. So consider Halon if they may meet a certain need. I see them sold for car enthusiasts and for people worried about expensive electronics where they don't want surrounding areas or items ruined by the dry chemicals left behind.
@leifjenkinson4039
@leifjenkinson4039 4 жыл бұрын
Some of the halons were poisonous when they burned/heated. Have those types been withdrawn? Is Halon 2 the newer safer one? My workplace had Halon extinguishing and had to replace. Multiple fixed 100 pound bottles. That was shipboard, and we had the US Coast Guard on our asses annually. Worse than OSHA - they were more ignorant. Also, extinguishers make Oxygen scarce, so Get Out of There! That's why we had "turnouts" (Firemen outfits with air tanks.) The dry chemicals were not safe in food service. Australia came up with the "K" type. Supposed to be safe around food and preparation/cooking surfaces. A lot of work places may have a break area with microwave, maybe food/coffee, cups, a refrigerator, utensils. Cleaning up dry chemicals is insanely difficult and tedious. It penetrates everywhere.
@ironmatic1
@ironmatic1 Жыл бұрын
@@leifjenkinson4039 K was created due to BC dry chemical not being able to prevent reignition of fryers. Sodium bicarb that was required before is totally safe.
@MrBowmanmt
@MrBowmanmt Ай бұрын
I have the exact same one that's on your wall and I actually used it for just a quick shot. My question is can I still use it or have to have it recharged. It's showing on the gauge that it's still in the green
@nathanwood6181
@nathanwood6181 4 жыл бұрын
Hey Rob, What battery platform of tools would you suggest? Trying to decide what to invest in since I will be doing framing and some finish work too. Need some good woodworking options. What do you run?
@ConcordCarpenter
@ConcordCarpenter 4 жыл бұрын
Milwaukee, Makita or Dewalt if your a carpenter
@michaell7877
@michaell7877 3 жыл бұрын
Hi Rob. Good video. Question. The FE that you have the link for, is it rechargeable?? thanks.
@ironmatic1
@ironmatic1 Жыл бұрын
Yes, of course. Overpriced though.
Top 10 Marketing Tip Series To Grow Your Business - Carpentry Tip Series
14:49
A Concord Carpenter / ToolBoxBuzz
Рет қаралды 4,3 М.
Fire Extinguisher Inspection
2:20
Silco Fire & Security
Рет қаралды 32 М.
HOW DID HE WIN? 😱
00:33
Topper Guild
Рет қаралды 37 МЛН
ОСКАР ИСПОРТИЛ ДЖОНИ ЖИЗНЬ 😢 @lenta_com
01:01
Who has won ?? 😀 #shortvideo #lizzyisaeva
00:24
Lizzy Isaeva
Рет қаралды 10 МЛН
Я нашел кто меня пранкует!
00:51
Аришнев
Рет қаралды 4 МЛН
Types of Fire Extinguisher and Their Uses
2:46
Fire and Safety Centre
Рет қаралды 1 МЛН
Microsoft's Fingerprint Reader for Windows XP
13:17
Michael MJD
Рет қаралды 121 М.
30 COOL TOOLS YOU MUST SEE
10:01
TECH HUB
Рет қаралды 9 М.
WORKSHOP TIP -Labeling Tools, Parts and Consumable Accessories
3:18
A Concord Carpenter / ToolBoxBuzz
Рет қаралды 8 М.
We Built a CHEAP Backyard Pool using an Intex Pool - Part 2
24:41
Two Infinite Series Sums from Regular Polygons (visual proof)
3:35
Mathematical Visual Proofs
Рет қаралды 6 М.
7 useful ideas for making round bars from square lumber
24:43
JSK Projects
Рет қаралды 52 М.
Carpenter Apprentice - Trade-Skills GAP -What Can We Do Better?  Video 1
5:36
A Concord Carpenter / ToolBoxBuzz
Рет қаралды 10 М.
Simpson MegaShot Pressure Washer
5:01
A Concord Carpenter / ToolBoxBuzz
Рет қаралды 31 М.
Fortnite mini Aquarium
0:40
RAWWFishing
Рет қаралды 8 МЛН
Как люди тонут?
0:43
Silver Swim - Школа плавания
Рет қаралды 10 МЛН
Change!!😁 #shorts #レオ
0:46
レオ★スマイル
Рет қаралды 9 МЛН
A clash of kindness and indifference #shorts
0:17
Fabiosa Best Lifehacks
Рет қаралды 13 МЛН
KINDNESS ALWAYS COME BACK
0:59
dednahype
Рет қаралды 122 МЛН
Этот Малыш Очень Умён 😂
0:20
Глеб Рандалайнен
Рет қаралды 2,4 МЛН