Very few things look as cool as that kart looks flying down the road. The body makes it look amazing when it’s flying
@jonlawrence63385 жыл бұрын
Reminds me of a rally car
@yrmoma5 жыл бұрын
The irony of a Nascart that turns right better than left...
@Blurgamer175 жыл бұрын
...That can actually turn Right*
@justgrayyy1055 жыл бұрын
yrmoma Turn Right to go Left - Doc Hudson
@chaseware31815 жыл бұрын
@south And not true they do circuit tracks as well.
@trillrifaxegrindor44115 жыл бұрын
@Anthony Gwara nascar meathead,watch it.........figure it out
@dinnercat11424 жыл бұрын
@@chaseware3181 No, that is incorrect. Nascars have the steering biased to the left during races, but during circuit races, it's even.
@gokarting10185 жыл бұрын
Put wide slicks on it and put Goodyear on them like an actual nascar
@CarsandCameras5 жыл бұрын
Trust me I really want to, but I don't want to hack this chassis. It's way too clean.
@gokarting10185 жыл бұрын
CarsandCameras lol as much as those are worth I don’t blame you put Goodyear on the tires that are on it to complete the theam
@justwatch47575 жыл бұрын
Just put the Goodyear label on the tires
@milan51595 жыл бұрын
It isn't a predator so they won't do it
@thIDthIRreenactor4 жыл бұрын
@@CarsandCameras I got 1 slick for mine that is a factory slick but I dont have all 4
@corndawg00245 жыл бұрын
MAKE A TRAILER FOR THD LIFTED CART TO PULL THE NASCAR.
@Sirpalmbranch5 жыл бұрын
Now that would be cool!
@kgomotsoselwe47235 жыл бұрын
Thats smart
@tacworx25 жыл бұрын
Cool!!!
@ciarahymon86985 жыл бұрын
Yeah that's what they should do
@nathancano77905 жыл бұрын
That would be sick !!
@jeremyh88205 жыл бұрын
This has got to be one of the most epic builds. What a beast. That level of frame sketch combined with the power is just crazy. You can tell it pulls like a bat out of hell in the higher rpms.
@Koshunae5 жыл бұрын
You guys need to get something like a motorcycle RAM bar mount for your phone when you do top speed runs, that way you can have full attention on the road and not worry about holding a phone.
@GearHeadWW235 жыл бұрын
Akron makes good mounts as well
@mowler80425 жыл бұрын
I made this same comment, someone in the states send them one please.
@Kitao875 жыл бұрын
I told them i would 3d print them something. Asked where i could send it, no response.
@mowler80425 жыл бұрын
Ram bar mount is not expensive and very durable it would be easy to send them one if someone lives close to them..
@metalmyke15 жыл бұрын
They used to duct tape or zip tie it.
@serious_laugherc12525 жыл бұрын
How is there already 3 dislikes The video has’nt even been uploaded for 10 minutes I already liked
@ryanwilliams16515 жыл бұрын
How cool is it to be a grown man and get to play like a tweenager!!!!???? Dudes, I am so jealous.. I must escape the real world day to day madness.. Thanks for another awesome video.. I'm living Vicariously!!
@BurntToast88775 жыл бұрын
You guys should do a burnout kart build🏎💨 like the Australian burnout cars
@Mainroad.Manjis1015 жыл бұрын
Jacob Lloyd and put the KRANKY (burnout out car) shell on it
@bakedpotato82184 жыл бұрын
Yes with ford falcon xp kinda look
@MrBannnnnny4 жыл бұрын
Why be spinnin, when you could be winnin?
@alexisthewandererlwpforlif36845 жыл бұрын
Heh why not put the 670cc on it and feel like a real NASCAR driver? I'm sure it's overkill but itd be entertaining
@user-hg2sm6wq6v5 жыл бұрын
Entertaning purpuses only!
@alexisthewandererlwpforlif36845 жыл бұрын
@@user-hg2sm6wq6v yes!! I didn't think of that till now lol, itd be fine.
@AntonBabiy5 жыл бұрын
That engine wouldn't fit without cutting the body
@alexisthewandererlwpforlif36845 жыл бұрын
@@AntonBabiy they wouldn't need to put the body on for the first run, if they like it, then yes they would have to modify the body but if they don't then hey no harm done.
@AntonBabiy5 жыл бұрын
@CryinBranston I think one day they should make a burnout go kart with a big engine, front brakes and skinny rear tires 😉
@drewtooker42435 жыл бұрын
Perhaps maybe instead of modifying the original chassis you should find a different style go kart that you can modify to handle and stop well and also properly accommodate some serious horsepower. You should still keep the original chassis and perhaps rebuild the original engine so that you can just put the body on the chassis you feel like riding. Great video as always can’t wait to see the return of the rail.
@Mixer_Driving_Nurse5 жыл бұрын
Drew Tooker I was thinking they should build a replica frame with a live axle. That would keep the original chassis untouched and one that the body could bolt to and still hold the extra power this engine has.
@drewtooker42435 жыл бұрын
Johnny Thompson that was my idea exactly. Have a performance chassis that the body drops right on to while leaving the original in tact for the collectors value.
@gfrankum635 жыл бұрын
They can always use the $50 go cart frame if they decide to take all the monster truck stuff off. Both frames look alike, and they kept the live axle on it for future projects.
@jamesrose19745 жыл бұрын
That's funny! The moment John accelerated, I heard a motorcycle get on it! It was like mini mayhem surround sound!
@erichoffman32055 жыл бұрын
I personally think you guys should really do this one up with a live axle kit and give it the full racing kart treatment. hell, maybe buy another one and race them!
@CarsandCameras5 жыл бұрын
We're on the lookout for another one in worse shape we don't feel bad about modifying!
@erichoffman32055 жыл бұрын
I feel like you guys can add to this one without really doing much!
@GearheadENG5 жыл бұрын
Or talk to a fiberglass guy who can make a mold out of that body. Then you could have multiple body's made and race them. Keeping them slow would actually be pretty entertaining.
@williamgottlieb87235 жыл бұрын
Sure! Another one to race, but then another two more. One done up as a regular street car to speed away from one done as a police car to chase it with flashing lights and siren!
@thIDthIRreenactor4 жыл бұрын
@@CarsandCameras hey how much is a naskart like yours worth without the fiberglass body like are they valuable
@jamesvincent51425 жыл бұрын
That was sweet. Issac coming around sideways down the drive way was so rad.
@CarsandCameras5 жыл бұрын
DON'T FORGET- Come to Busco Beach November 3-4! More info on our Facebook page!
@sweeneysweeney19015 жыл бұрын
Wouldn't miss it just ordered 2 tires for my 250
@sweeneysweeney19015 жыл бұрын
@@orestiskiriakidis6502 mines not a 2 stroke got a hammerhead gts250.
@cavinmeade945 жыл бұрын
CarsandCameras you should of cut a hole in the back for the exhaust hole it be so cool
@Foshomoto5 жыл бұрын
Put a jack shaft on it and and another sprocket Tire hub
@kerryhuston36695 жыл бұрын
Dang far ike fits that one good. Sorry can't come to Bosco beach. Thanks for sharing.
@onewheelpeelproductions4705 жыл бұрын
Well I gotta love the one wheel peel part. I remember wanting these promo go karts back in he 80s as a kid. It was almost an obsession after seeing one at the local store back in the day.
@ianguttendorf96625 жыл бұрын
That lift off over steer is no joke!
@ttii45575 жыл бұрын
Fwd penonmenon
@exquisitenonsense39875 жыл бұрын
That looks so cool with the body on. I remember the Hardee's in Wilson back in the 80's had a Cale Yarborough Monte Carlo-bodied one in the lobby you could register to win. It was probably the same mold.
@robertjames78695 жыл бұрын
Another "we're having way too much fun " video! Man, I'd love to spend a day with you two!
@SepticMonkey4225 күн бұрын
this needs to be brought back, modern C&C NASKART would be epic
@matthewwolfe79625 жыл бұрын
5:32-5:36 “Did you almost get you in the nu...”
@brettcarlow57795 жыл бұрын
thought i heard that lol
@benkunkle154 жыл бұрын
@@brettcarlow5779 same
@bcnsucks5 жыл бұрын
That thing looks AWESOME at speed and going sideways! That body deserves a better frame. It would be a real attention getter ripping donuts and 2 wheel hole shots like the Ducati cart.
@tbirdracefan5 жыл бұрын
Best news ever that the rail is coming back!
@mitchm29995 жыл бұрын
I have been watching u guys since ur first upload and in my opinion what i think would make ur channel more amazing then it already is is to actually spend a lot of time on one project and make a bunch a videos and make it like an amazing kart or whatever it is, and not just a week or two on one and make decent. Like this if u agree. No hard feelings, i love u guys
@Barnacules5 жыл бұрын
This is my sons favorite video 👍
@youtubepoop18273 жыл бұрын
Barnacules Nerdgasm shut up you old man
@andrew_bro6793 жыл бұрын
@@youtubepoop1827 bro stfu. How old do you have to be to say shit like this, go play fortnite you little shit.
@Everettmachin3 жыл бұрын
@@andrew_bro679 ada be man!
@lolno39683 жыл бұрын
@@youtubepoop1827 band kid
@xavier-hm4gf3 жыл бұрын
@@youtubepoop1827 I bet your gay
@ghomerhust5 жыл бұрын
gotta say, she looks GOOOOOOD kicking the butt out to the side on the open road there. really nice
@Chevelle_addict5 жыл бұрын
A friend of mine has the mold to build Corvette and 32 Ford bodies for karts.
@GearHeadWW235 жыл бұрын
I need one for mine lol
@gixxerjesse4 жыл бұрын
How can we get a hold of your buddy?
@benkunkle154 жыл бұрын
May I have
@Chevelle_addict4 жыл бұрын
@@gixxerjesse I can see if he's building any right now.
@Chevelle_addict4 жыл бұрын
@@benkunkle15 he won't sale em.
@kevin866705 жыл бұрын
I had a gocart back in the day that sat low and had the one drive tire. We put a 8hp Briggs 319cc on it. That dude was bad!! I can feel the excitement with y’all. Hahaha
@jerrekt5 жыл бұрын
The kart looks awesome with the body on! :)
@ChristopherHayniedd9805 жыл бұрын
Now that’s a go kart one leggier burnout. So awesome. I can’t wait for your videos every week.👍🏻
@Dan_Kornfeld5 жыл бұрын
How about a FWD project? Or better yet - FWS (four wheel steering)!
@DieCastoms5 жыл бұрын
"Noma" garden tractors had 4-wheel steering. My father and I really wanted to get the transaxles out of two matching Noma's and build a 4-wheel-drive 4-wheel-steer "monster truck" of some sort, but never found a second tractor before junking the first..
@jxke5 жыл бұрын
They already did the 4 engine cart.
@nolansprojects28405 жыл бұрын
Jacob Villines yea... boy was that an experience! Lol
@justwatch47575 жыл бұрын
I have never seen a front wheel drive go kart yet
@jxke5 жыл бұрын
justwatch look back through their videos you’ll see the two front engine cart
@Masterfab935 жыл бұрын
This brings back memories in my first go kart with the built Briggs & Stratton methanol motor on it. way too much engine for a single wheel drive go kart but a lot of fun.
@rickshown77705 жыл бұрын
You guys that one wheel peel is awesome
@jasonkocinski23875 жыл бұрын
U guys are Nuts. The frames for those Fun carts isn't much thicker than a piece of conduit. But it was AWESOME to see that thing going at top speed and dance.
@pmaster5875 жыл бұрын
here before 1000 views!!! I LOVE YOU GUYS , Mondays are never dull with Cars & Cameras :D
@alexsprings875 жыл бұрын
Loved the video so much, liked and watched it twice in a row!
@lucasberggren6765 жыл бұрын
Damn, one wheel peal to hell!!!
@ianjennings83725 жыл бұрын
I could feel Ike’s joy as he lost control in that burnout. Keep up the good work.
@Bublius5 жыл бұрын
Have you considered finding or building a new chassis you could put the naskart body that way you can modify and not feel bad about ruining the original chassis
@csvexar21525 жыл бұрын
Love that part at 12:54 when he drifts it!!!!
@reginaldmiller88125 жыл бұрын
I'm not even in that cart and it looks fast great job
@BIGWojo685 жыл бұрын
😂😂😂😂 I love how Ike is just sitting in the background at 2:26.
@keithfrisell42715 жыл бұрын
I had a one wheel peel with a Briggs 5hp no governor in 1981 and it would lay rubber forever and I thought that was fast then a new kid at school said wanna race absolutely, when I show up he pulls out a marga racing kart with 100cc Yamaha on it and huge Goodyears ,after I got my doors blown off I junked the kart and put that motor on a mini bike but that is another story. Keith
@MrTheHillfolk5 жыл бұрын
keith frisell Lol we hung out at a buddies one weekend and killed the tire between a Saturday and Sunday afternoon, good times.
@kage.2wild4435 жыл бұрын
Y’all have some really clean cars just popping up in the back ground of this video!
@81DEK5 жыл бұрын
To all you haters out there if you don’t like the way they do things quit watching. Nobody would miss you. Thank you and have a nice day.
@conradjake7775 жыл бұрын
Everything about this episode is just AWESOME!!! Great job guys!!! Love the vids guys!!!
@Cservoss255 жыл бұрын
I had the same frame with a mtn Dew body back when I was young. What does the tag say on the back of the seat just curious?
@matthewmann89515 жыл бұрын
Nice 100 footer, 1 wh. You guys are killing me over here already. God bless peace my brothers
@RedWolfgarage245 жыл бұрын
I want to see you guys build an intake manifold for the original engine and put a Honda or a four wheeler carburetor on it with the straight axle and see which is better also great video and can't wait to see hopefully what I just said
@TheJoeDavisx5 жыл бұрын
Love all the little tricks for extra leverage on your tools Ike! 👍
@Masuka-nya5 жыл бұрын
awesome! now make a mower with real sized tractor wheels xD
@edwardthayer89655 жыл бұрын
thanks for all the videos showing all the projects your working on. Some of the stuff you guys are doing gives me ideas on future projects that I want to do. Thanks guys.
@nickthecarguy-channel5 жыл бұрын
That thing looks like a hoot!
@theone2be335 жыл бұрын
Well what you really needed to was link tow bar up to side bar to give you better calibrated traction. But since you dont have single position to front and rear alignment might be difficult. You could always mount one from underneath to help stabilize everything.
@MG-up5mh5 жыл бұрын
43.7 Boom, but I know it had more, uh huh..... 12:45 Ike’s homer scream.
@MilliganMotorsports205 жыл бұрын
Loved the one wheel peel from that old go karts, awesome project!
@danielcastelow75235 жыл бұрын
Put better tires it would do A little better love the kart tho😎🖒🖒🖒🤘🤘
@itsme-ow1nn5 жыл бұрын
You guys are crazy. Luv from England (the U.K)
@reygar5 жыл бұрын
Nice!!! OK, you guys need to set up a race with Build Break Repeat's one wheel peel machine: "Go Kart Turbo Install! | Turbo Drift Kart Build" before they go to a live axle set up, and before they perfect the turbo install on theirs. Their first attempt at turbo-ing is not looking good, but the kart is very similar to yours in performance. It would make for a great race. What do you say, can we make this happen???!! I'm sure we would all love to see it and it would get mad views. Don't make us beg!! lol!! Hell, you could both race single wheel, do the live axle conversion and race again to make it a full event!! Reference Video: kzfaq.info/get/bejne/l6tpbMJk08rWoGg.html
@modelnutty65035 жыл бұрын
I've said it a few times, instead of all the complex plumbing for a turbocharger, why not use an electric model jet ducted fan to pressurize the intake? its speed controller could be set up to work with the throttle (hall sensor), even program its response. it'd only need a little 3S or 4S LiPo to run it, a switch for when wanted or not.
@wymansst5 жыл бұрын
That’s a clever idea model nutty. 👍🏻
@andrewskinner58605 жыл бұрын
awesome. it's great how you can keep it flat out and use that one wheel drive as a clutch transfer the weight. nice carb conversion.
@seanforehand7555 жыл бұрын
Boogity boogity boogity
@621ELECTRONICS4 жыл бұрын
Always liked the go karts with the body's. My uncle gave me his old Rupp Vega body 20+ years ago, still hope to build a frame / kart for it eventually.
@blorpcartons1815 жыл бұрын
Wow I’m here early
@Lee01Mr5 жыл бұрын
Nice start of the week yeah!!
@cbudginas5 жыл бұрын
Don't whine about a trench cause you lost. Sportsmanship
@1badk205 жыл бұрын
That engine build is identical to my Predator 212 build, except I am using the .292 Drag Racing Cam and 1.3 Roller Rocker Arms with GoPowerSports Ported Head with Larger Valves. I have this in my Mini Drag Bike. Man that thing is fun. I currently have it set up for VP110 because the engine has 12.5:1 Compression, I was told it makes 22-25 Hp. I have had it to 10,000 rpm and use an Mini Digital Tachometer to make sure I do not blow the engine, because it will Rev to the moon.
@apollosport28955 жыл бұрын
I bet this wont get pinned but can I bring my horse to busco beach?
@matteedstrom5 жыл бұрын
Don't play with the food!!!
@izzyplusplusplus10045 жыл бұрын
It's a free country?
@Andrewlang905 жыл бұрын
This cart is so cool. I was thinking this would be super cool to turn this into a burnout cart!!!
@Roboticdoughbull3k5 жыл бұрын
The ballet of Rickey Bobby LMAO! Aka Ike 😊 like Wil Farrow and Hank Hill all rolled into one. Everyone loves ya guys. All in good fun. Keep up the great videos and work guys!
@EdwardMurray065 жыл бұрын
You guys gotta put a live axle on that frame. Something like that shouldn't hurt the value if done well and neat. Some sweet aluminum rims and new tires would also round it out nicely.
@deangelolawson61845 жыл бұрын
Can't wait to get off work to watch this fully
@masterchiefgaming88154 жыл бұрын
Seeing that mini NASCAR just booking it made my day
@grantcanman98732 жыл бұрын
Dude imagine hangin out with these guys they have so many toys to ride would be fun as fuc
@jessebellis4785 жыл бұрын
DO IT FOR DALE !!! GO BIG !! OR GO HOME !! LOVEs This One !! Nice find guys !! You guys are AWESOME !!
@dangallfastgarage59025 жыл бұрын
Probably about as scary as an '83 Nascar car. That looked so awesome and sketchy, I loved it!
@sadow513 жыл бұрын
I had the same Go-kart when I was a kid! It’s was awesome. Still have the pieces
@GearHeadWW235 жыл бұрын
I just ordered a hat, shirt, and a sticker pack. thank you @CarsAndCameras for these awesome and fun videos!
@jok3yjesu3395 жыл бұрын
The 20hp 212 needs to stay on that thing, it looks sick
@notdatboileroy96023 жыл бұрын
Listening to them scream in terror/joy is great!! 😂😂
@brandonsmith26945 жыл бұрын
that's was awesome guys so much tq
@g-man80085 жыл бұрын
If you don't want to make any modifications to the current frame that you have, then build another one that the body will go on. That way you can make all the modifications you want to the other frame and use the body on that also.
@austinlong9211 Жыл бұрын
I loved how hype Ike got over the fact it was tucking tire 😂😂
@Orbacron5 жыл бұрын
if that doesn't sound like NASCAR now, whatever.. authentic pro grade guys, love the video 👍
@timthompson49055 жыл бұрын
This is my favorite C&C kart to date.
@monahumada75355 жыл бұрын
Another good Monday at work!!
@ChuckWood5 жыл бұрын
My first go kart when I was 10 (1995) was only 1wd. Changed it to solid rear axle when I was about 16 once I learned how to weld.
@addicted2fuel2455 жыл бұрын
Live axle is needed for sure. This thing is sweeeetttt
@hillonwheels88385 жыл бұрын
Make some brackets that will bolt onto the stock rear axle that will allow you to attach a live axle so it will no longer be a 1 wheel peel and not modify the originality of the cart. Very awesome cart. My idea would be a piece of plate with a hole for the axle and a piece of L to sit up against the bottom of the frame. The only problem would be the rear axle would have to be wider then the body or maybe a deep dish wheel that would go over the stock axle. If not this is still a cool cart.
@oliververnon69665 жыл бұрын
Man it's amazing how much cooler a nice body makes a go cart!
@jstephenallington84315 жыл бұрын
Yessss! Bring back the rail cart! WooHoo!
@oli12shackel95 жыл бұрын
That engine is insane!
@Dwayne78345 жыл бұрын
Great video. Bad ass speed.
@ethanpereira92334 жыл бұрын
That Nascar body is awesome
@nickeycole89535 жыл бұрын
Guys I love the videos for sure!!! Put that NASCAR with the 20hp (6.5hp) single drive wheel against the DELOREAN live axle TILLESON 10hp(6.5) but on the streets!!! Also, try building a “fast track” tank style ZERO TURN lol!!!
@ELxTALIBAN5 жыл бұрын
That Nascar Monte Carlo ss 😎😎🍻🍺🍻
@mexvette82095 жыл бұрын
I hit 57mph with a 1 wheel left rear drive gokart with 53 tooth sprocket. Had a212cc Hemi Predator with a 2.65 lift hot cam 22mm Mukuni carberator, ARC flywheel and connecting rod, autolight racing spark plug. This is on a small gokart back in March. I've since upgradded the rear axle to a 44inch live axle and bigger tires up from 11.2 inch diameter to exactly 13 inches added a .20 over connecting rod plus have done a moderate port and polish and shaved .35 thousands off the head. I've not done another speed run as of now will post future results after I replace the mechanical disk breaks with hydrualic ones. They barely work to much power.
@ranchhandrandy32135 жыл бұрын
Who ever heard of a nascar making a right turn? 🤣🤣🤣 Cool find guys!
@Promethesis5 жыл бұрын
Ike, if there's a Matteo's paint store close by, take the body there, and they have a paint scanner that can match up the paint. If your going to do it right, try it.
@shipwrecked20065 жыл бұрын
Darrell would be proud,love to see a live axle and a run on a asphalt track
@tacocat88843 жыл бұрын
I'm glad I found this video. I purchased a frame last week that looks exactly like that one.. Too bad no fiberglass body but hey what can you expect for $60