Had to take down this video briefly around 1/2hr into its life due to audio issues we were getting from KZfaq's version. To stay up to the latest on TTC memes, follow us on IG: instagram.com/torquetestchannel

I can't wait to start seeing boxes with the labels stating, "**Makes 85% of max torque shown on box". Torque claims have been tested by TTC as required by law.

"we're just a small KZfaq channel." AvE was a small youtuber when he started doing the BOLTR series, I hope you enjoy similar growth for calling out marketing b.s.

Oh man, been waiting for this one for a while! Nice job, perhaps Capri accidently put a 1 infront of the 715

Capri cease and desist order in 3.2.1.. 😂

"Hurt some feelings and break some stuff" - we could be friends!

This is what this channel was made for! 👍

As someone who works for MSC/Barnes, I just love seeing the Bowmalloy B on the hex head cap screw. You and project farm are definitely my go to for any recommendations on tools or products, keep up the amazing content!

Thank you for a needed chuckle. And putting out verifiable data.

Love it! This channel gets better as it goes!

The sheer amount of information this channel gives is staggering. While I doubt any company will chage their business model at least we have a wonderful place to see how they perform against each other. Thank you for what you do.

Honestly one of the best channels out there. Keep up the good work ❤️

I really questioned that number. Glad to see someone give honest test results.

You guys are awesone. I love the commentary.

Love the memes and the services yall provide. Keep at it.

You raise a great question, just how much torque can a 1/2" anvil take before failing?

I see this channel becoming a big success. Hell I'm even making tool purchase choices based on what was shown here.

Well I've got to give the makers of Capri a gold star for optimism, I can't say the same for realism though

You guys have saved me time and money.

very happy with purchase

I remember when my sister used to wear Capri pants.

Funny how manufacturers play with numbers. I’d bet they tested it with the hose straight into the inlet with no quick connect and used a different bolt size. That way they could fudge the numbers. Nice job testing it to show its real world performance. 😎 👍

Not as strong as advertised, but really nice for the size and not too expensive, I like it :)

You got some cool videos! Love to see 3/4 air impact videos. How some air tool companies come up with crazy torque numbers. They take a specific size bolt or nut then oil or grease it they tighten it to say 1700ftlbs then loosen it then they say the tool makes 1700ftlbs nut busting torque. Not real world torque numbers . When buying air tools I always look at the working torque range.

Coming back to this, crazy how much your voice has changed, and fuck, tools have changed.

I'm no so surprised that air impact brands that aren't IR, Aircat, Astro, or tool truck brands are usually near the bottom. Feel fairly good about having an IR 2235TiMax, being purchased before this channel existed. I have an Astro 1828 3/8" gun, I don't know that it's actually internally different from an 1822, but it seems quite strong for a 3/8". I do have one of the old red earthquakes that looks like the "DP" gun and I doubt it's that weak - seems maybe slightly more powerful than my Astro 1828, I use it a lot for removing lug nuts and it doesn't seem to do anything but buzz them right off...

Twin Power means they used 2 guns in a nutz-2-buttz configuration to get those torque numbers.

Your information is good

Those meme at the end are spot on.

Has there been a video made on the Blue point At123? I have one, and it's heavy and definitely loud! Seems like a heavy hitter. Seen on the snap on brochure that Google pulls it hits with 425ftlb of tourqe. It'd be interesting to know. But thanks to your channel. If I ever need a new 1/2" Impact I'll know what to get!! Keep up the great work

Great video 👍

I picked up the harbor freight version of this gun and it’s SUPER air hungry. It pulls down my 1/2” hose about twice as much as my 1250k when running no load full speed. Crazy!

I love this series so much! I’ve got possession of an older m18 “high torque” that’s non fuel. 450ft-lbs. any interest in a back to the past episode?

Bloody good video

Love your videos 😍

You guys are doing an excellent job,keep up the good work👍🏻 I wonder if you guys can test the 60 volts DUROFIX 1” impact wrench,I think they are claiming 1900 foot pounds of torque.It would be an interesting test against the Milwaukee.

Great video as always guys. I noticed the compacts were not on the rank list last night under the shared Google Drive document. I wanted to compare all the Milwaukee impacts to each other, that would make for a great video by the way, putting all of them up on one dyno chart to see if it's worth upgrading from 1/2 M12 stubby to 1/2 M18 Compact

I thought false advertising is a crime- seems a lot of these companies just don't care. Love your channel!

You guys need to text that new Duroflex 1” gun it’s pretty wild

My man manually calculating fields in a spreadsheet 😂

Really looking forward to to the next air hammer video with tool truck brands

Hytorc BTM 3000 we use it at work for 2-3 in nuts. Battery powered and a pure beast

Maybe those torque wrenches should put a warning label on the box: "Do NOT go to Torque Test Channel". "May cause hurt feelings".

You know, anyone can make a 3/4" gun with a 1/2" anvil. Indeed, many of these really big guns are just that. What I want to see more power in a smaller form factor. Like say, a gun optimized to run on 150psi all day long. Hook it up to a PowerTank running on CO2 and see what she'll do.

I have the matco gun and it’s amazing

The thought about the anvil taking 1700 flbs is interesting....back in the 90s when I was working on trucks the shop had a 3/4 drive cp impact with an extended anvil the shop ran 150 lbs of line pressure and a 3/4 air hose.....that gun would routinely destroy the anvil.

I'm still using my father-in-laws 30+ year old Matco impact wrench. I've seen him bust off all of the nuts on a rusty old Model T Ford, then he restored back to original condition.

Great job you are doing! I would be interested to see how Shinano SI1460SR or SI1490BSR performs. Or any Shinano pneumatic.

Carpri makes great tools. I just got some of the thin combination wrenches they make. They are so nice.

Bought a earthquake years ago and was surprised by the stuff it broke loose. I had a Campbell Hausfeld that put some lugnuts on so tight I bent a big 4way and no luck breaker bar and 6ft pipe to break them loose

Thank you for all of your tests, much appreciated. Would you please test some Hazet impacts, they claim bog numbers, German made (PRC). 😅

Snap-on would seem to have some bold numbers with thier PT1800A 1" compact gun. Advertised 1800/2000 I'd love to see you guys dyno it at some point! 🤘

That giant nut they show at the end was made for packer fastener in Green Bay Wisconsin, working outta town here and seen it a few times in person

Have you by any chance tested a Hazet 9012M thanks for the videos, best regards from Germany

Maybe they're just trying to keep up with the HP numbers Ford claimed when they released the Capri 🤣

Capri makes nice bench vises, at least.

Yooo! That's bad ass💯

Seeing if a torque multiplier works would be cool

For selfish reasons of curiosity I would greatly appreciate ANY test redone with a thrust bearing. I want to know how well thrust bearings work against Pascal’s Law.

Looks like the dp has some competition now

TTC to 100k!

Bummer, I was hoping for 1700! Maybe defective maybe marketing lies! Thumbs up and subscribed!

The length is the selling point.

Are you guys gona test the ir inch gun they released with twin 20v batteries

I watch your Videos from Germany. The German Brand Hazet has some Serious Impacts in thier Program like the 9012TT with 2200Nm of Nut busting from a 1/2 or the 9014TT 1inch with 4100 Nm of Nut Busting. Seems like the a Proper test and mybee the leed on the board....

DXP series 60V Cordless 1 inch BRUSHLESS Jumbo Impact Wrench 5-Stage Torque Control (max 2,500 ft-lbs), RI60176-xx guys need to try that impact next

I would love to see a 3/4 air impact comparison ! :D see a lot of 1/2 inch and 1 inch but I do not know wich 3/4 is the best :D matco? aircat? ingersol? snap on?

Need to use Capri Sun instead of air tool oil as a lubricant to get maximum torque.

I have one now for 6 years it’s best to crap but still works like new very powerful

I'd be interested in seeing the differences between air fittings. I've got Milton hi-flow V-style purple fittings on my tools and air hose. The tool truck sells Flexzilla for a lot more, they're almost double the price on amazon. And maybe how different types of swivels affect torque.

I have the stubby 1/2” I can send you guys. It’s only got a couple months of use on it. I’d love to see what it actually does. I’ve taken some larger truck lugs off with it with a little bit of effort.

**Zach Galifianakis laugh**

I would love to see pressure washers be tested somehow.

Do you have on your channel test for Earthquake EQ34XT-20V. ?

Well that was sad. I'm STILL waiting for my Astro "Thor" that I ordered 2 months ago.

Manufactures: nobody will ever know. TTC: were gonna find out. Outrageous claims are the norm nowadays. Without regulations they say whatever is most appealing

Test the Durofix 60v 1” RI-60176? Might break the rig again.. Or maybe the RI60166A1 since it has tightening presets… you could validate the claims, or use it to calibrate the rig?

Formula 1 racers are using like 2200psi on their air tools.. Test one of those!!! My IR244 was ported 25 yrs ago, still going strong.

Need an 18,000 psi air supply or else you can't really test it. We designed it for 25,000psi, which will give 1700lbs-ft.

maybe you can get a hold of a hydraulic wrench and tighten some big bolts to a torque setting then try unbolting with the impact. we have a 3/4 , 1 inch and 1 1/2 that goes up to 7000 real ft lbs using a 10,000 psi pump. need big bolts for the big numbers though. of course you are looking at like 5k for the setup with a 1 inch drive that goes to 3000 ft lbs.

You guys should do the newish Matco vs the new snap on !?.

I think they forgot to convert from Nm to ftlbf. 1000Nm is 737.5 ftlbf. 1750Nm is 1290ftlbf. Those numbers place it more squarely in the mid-torque range as its size implies, and as such, it comes closer to those converted targets.

Can you test the 1 inch central pneumatic Pistol grip? The price is amazing but is it worth it for most DIY who need additional juice from a 1/2 impact when needed...

I love thos canel so much. But you should invest in a 1ich torque wrech and a bolt and test the nut busting torque that the gun claims. And also impacts don't increase torque with higher line pressure but they benefit from volume of air. I have the matco gun and when hooked up to the 1/2 inch Air line at work I haven't met bolt that I can't get loose and I'm a 310t tech

Should try Grainger's pneumatic green speedaire 1/2 that claims 600ft/lbs

I think its obvious that they measured the advertised torque as applied to a bolt after having been de-orbited from low earth orbit at about mach 7.

3 uploads? I must’ve missed something

I see you have never tested a basso. Very good impact guns, mine 1/2 rated at 650ftlb, may make more, it often smashs stuff that doesn't move!

Does the Kobalt 1,000ft lb air 1/2 even compete nowadays? Seems to be cheaper than the Earthquake xt at $150

i know its expensive, but can you test copper crimping tools? :-)

Can you test this impact wrench 'usag 929 pc1'?

Claim as high a torque rating you desire, but you are going to get dinged on the TTC!!!

That 1/2" anvil would snap on the 3rd impact. You should find or make an adapter for a 1" female to 1/2" male and see where it snaps.

You guys ever tested a Bance gun?

350 thousand subscribers let's go I say this and every comment I put on here as I absolutely love the channel. I'll confess to buying a Chinese knockoff and a link that I left which I never got an answer to but that's okay I guess they're busy

I'd like to see a test of the Flexzilla impact gun. I have one that I'd be willing to send in for testing purposes.

I think you should try tightening the bolt to the stated claim, and then try breaking it loose, and see if guns make their claim. AvE did a vijeyo on something like that, on torque-structo-matic, and it makes a difference on static forces... Worth some investigation on impacts?

These companies need to be more honest with their ratings. I don't believe Ive ever seen any impact go over 1000 on your channel. Which means every company lies and we shouldnt pretend like thats okay. I'd be much happier if it said its rated to 700 on the box and it ends up making 725.

Review some Shinano air tools

Test @ 20-22 bar / 290-319 PSI.