World's Smallest 4060 Gaming PC That You Can Build NOW

Рет қаралды 348,801

2 ай бұрын

Check prices on Amazon below:
CPU: geni.us/UlbRnQg
GPU: geni.us/RQ8J
Motherboard: geni.us/p4lqSR
RAM: geni.us/fFe0t
CPU Cooler: geni.us/2sUPsa
SSD: geni.us/OtxVw
Toolkit: geni.us/07FfP
Monitor: geni.us/bl5Imf
Use iPad as a Monitor: geni.us/JvqsXiK
Alt. CPU: geni.us/FWee2e
non affiliate:
Case: n3rdware.com/cases/yocto
Custom Cables: n3rdware.com/accessories/cust...
PSU: hdplex.com/hdplex-fanless-250...
Other Cases:
Velkase Velka 3: velkase.com/products/velka-3
Gemcase C9: / discord
Lazer3D HT5: lazer3d.com/ht5/
Today we’re building one of the smallest 4060 gaming PCs possible in the Yocto. This video takes you through the entire build process from the components used, including an Intel i5-13400 CPU and the Gigabyte Low Profile RTX 4060.
🎥 CAMERA GEAR:
Check prices on Amazon below:
Sony FX3: geni.us/9xnER
Sony FX30: geni.us/MfrG86B
Sony 28-70mm Lens: geni.us/0SK2
Sony FE 20mm F1.8 G Lens: geni.us/rcXK
📸 Instagram - / devyn.johnston
When you buy through an affiliate link, I may receive a commission on the sale at no additional cost to you. As an Amazon Associate I earn from qualifying purchases.

Пікірлер: 427

@nagaki2997 2 ай бұрын

Man is going to make a laptop at this rate

@fatrob88 2 ай бұрын

😂😂😂

@joesmith3829 2 ай бұрын

Sff laptop.

@shoobadoo123 2 ай бұрын

@@DazePhaseit's a joke

@gilmanator01 2 ай бұрын

Man’s gonna make a flip phone and call it a sffpc

@misteryolo7248 2 ай бұрын

This is smaller than a laptop 😊

@NukaOrQuantum... 2 ай бұрын

These mini-PCs are honestly my favorite. Small, clean, minimal, and relatively powerful. I should 3D print my own case sometime.

@naoltitude9516 2 ай бұрын

make sure to use ABS or something just not PLA, tends to melt

@NukaOrQuantum... 2 ай бұрын

@@naoltitude9516 ABS is a struggle for larger prints. PETG or Polycarbonate will be my material of choice, thank you.

@ruslan_yefimov 2 ай бұрын

Imagine making it like 27mm thick, while also having a battery, a keyboard and a SCREEN, in case you'd wanna use it on a trip or in starbucks... Oh wait, that reminds me something

@corsinivideos 2 ай бұрын

I got a morefine ryzen 9 mini pc, the fan noise was absolutely insane. Sounded like a space ship taking off to do basic tasks. I ended up getting an ATX case and will never go mini again, not worth it for that kind of insane running noise.

@NukaOrQuantum... 2 ай бұрын

@@naoltitude9516 I swear I responded a week ago, guess it didn't register. I would use PETG or Polycarbonate filament, thanks for the suggestion

@shutdown970 2 ай бұрын

4060 LP is wild

@corpingtons 2 ай бұрын

It’s so small 😂

@chowdhuryahsanhameem667 2 ай бұрын

thats what she said ;-;@@corpingtons

@arikowidtrash7074 2 ай бұрын

yes and has the same performance as the regular 4060 right? i think the difference is the price too

@Odinsday 2 ай бұрын

@@arikowidtrash7074Same performance and much more compact. There is a $30 markup, but it is a very high quality card, it feels like a brick in your hand. Puts the manufacturing of something like a LP 1650 or 3050 to shame

@Rspsand07 2 ай бұрын

@@arikowidtrash7074It's only a lil more expensive, for something so niche it's a good deal. Now the 4060 itself... Huge markup on that crappy card from nvidia. And SFF costs a lot more, it's everything else where you'll be paying a markup, not the 4060. Mobo, case, psu, etc,.

@danielhulan3058 2 ай бұрын

Man that case is beautiful. I love the black with gold accents.

@Sergeeeek 2 ай бұрын

Cool! I built a 4070 pc in velka 5 using your guide, works great, thanks!

@marcus-wv9ti Ай бұрын

really? how much did it cost?

@Sergeeeek Ай бұрын

@@marcus-wv9ti around 1800 USD, but I payed 800 on top for shipping overseas from US and import tax (18% in my country). Funnily enough it is cheaper than buying a lower spec PC here locally.

@wheezel55 11 күн бұрын

is it bad thermals/perf because of size?

@Sergeeeek 11 күн бұрын

@@wheezel55 I got an AMD 7600, these new AMD chips target 95c at full load, so no matter what cooler you have thermals will be the same lol. But if your cooling is good it will hit higher clocks at full load for longer. In my case I also undervolted the cpu quite a bit and it started getting slightly higher clocks. It's hard to measure that though, so I don't have exact numbers. As for gpu, 4070 is pretty efficient. I can play Cyberpunk 2077 with path tracing and DLSS balanced for hours. I get around 100-120 fps (with frame gen, so really like 50-60). There is no throttling or anything, so the cooling is good enough. Thermals are not a problem, but noise might be.

@pradeepmanoharan9914 2 ай бұрын

your studio aesthetics is top notch . the way you captured is classic . even top tech people in youtube doesn't fits to your quality of your video. Great work.

@angelodavis3990 2 ай бұрын

Talk about perfect timing! Been refreshing your channel for weeks, and there it is! Excited for your latest upload! Thank you bro!

@NUDELMOB 2 ай бұрын

nice find. they should really make a metal version, I think it'd look stunning

@MorganEdgy 2 ай бұрын

reasonable price, great performance, astonishing look, this has everything!

@NicholasGarofola 2 ай бұрын

Oddly really cool case. Love you’re video dude, been watching for a while

@radiantav 2 ай бұрын

That’s a really lovely case. Good build

@vitobozow 2 ай бұрын

Awesome build! Thx bro, i want assemble too looks like this project

@Randomness662 2 ай бұрын

I was definitely looking at one of these last year, but that was before the LP 4060 came around. Glad to see it's now a viable option.

@TrusteftTech 2 ай бұрын

1. Great video, thank you. 2. It's easily one of the most attractive small form PC I have ever seen. It's beautiful. 3. If only the case was made of metal. 4. If only it was dark orange color. 5. If only I had more than 5 euros in my account! Then I would definitely build one such PC.

@hafuridotus 2 ай бұрын

Probably going to look into something like this as my reference build for what I want when it's time for a third build. Right now I'm rocking the Teenage Engineering Computer-1 case, with a 3060 inside.

@b4kuryupl 2 ай бұрын

Dude! Outstanding build!

@bigd2911 Ай бұрын

Dude this is amazing🔥

@golfyoohoo 2 ай бұрын

sick build!

@lungisaninkosi5724 Ай бұрын

Awesome build👍👍

@dmoster 2 ай бұрын

This is awesome!! I really hope somebody makes a low profile or ITX-length 4070 Super. It’s such a powerful card for the amount of actual energy it takes to run.

@kizanko 2 ай бұрын

Hopefully they make a refreshed version of the case with a little bit more wiggle room for a extra fan and easy fit for the smaller 4060 rtx and better material against heat :)

@Nothwarren 2 ай бұрын

I've created mine. IT-X format, no GPU. I have it for what. 1 year now and it's been a really good partner, no breaking so far. I've printed it in ASA and it proves itself really strong. I travel with it 1-2 time a week in a backpack to go to work. I think about releasing the files really soon

@OmniMC 2 ай бұрын

Wow, who knew you could get a desktop so small. I'm glad I've begun to find these videos before I build my first desktop.

@crispycrusader1 2 ай бұрын

That looks like a classy little case

@tongoso 2 ай бұрын

Beautiful and sleek, of course, really appreciate the comparison with previous build and talking about temps, considerations and concerns, thanks!

@jonathanbutler6635 2 ай бұрын

If you’re interested in something smaller, the minisforum MS-01 can hold a single half height gpu, like the rx 6400, and comes in at less than 2 liters. It comes with a mobile cpu soldered to the board but the options are, a 12450H, 12900H, or 13900H. Not sure there are any better single slot low profile gpus though.

@JEHOVAHbao 2 ай бұрын

You are a PRO. Thank you!

@sireduard1986 2 ай бұрын

superb detail when choosing the 13400 because it heats up less with the same heatsink... magnificent!!!!

@provokor 2 ай бұрын

Hey Devyn! For builds like these, it's recommended to undervolt both CPU and GPU, right? Was wondering if it was considered hehe.

@glancevincent 2 ай бұрын

You getting me excited ❤

@johnv746 2 ай бұрын

Watching this, I could totally see similarities with Optimum Tech's vids especially in the presentation and style, and also in the scripts (I think I heard some familiar phrases also spoken by Ali on his sff build guide particularly on the intro for the pc components, dont know if its just me lol). Also, they both use 3D printers from the same brand (coincidence? idk). But anyways, the main distinction bet. this and Ali's sff builds is that Ali shows the use of modified components (e.g. perfect length cables, custom pcb controllers, 3D printed cases, etc.) whereas Devyn's builds focuses on PC's which you can simply buy the parts and build them yourself without the need for modifications. Although Ali does also have vids without the use of custom components. I would say I still prefer Ali's vids, but I dont have any qualms with getting inspiration (Its just the way the world works). Anyways, great vid and hope you continue with the creating great content.

@Ceaser43 2 ай бұрын

this is so cool! love how much work your putting in to give us all the information about the build

@Icon1an 2 ай бұрын

I built the velka 3, in a similar way to yours. With the addition off a 2.5" ssd that you can fit between the 1U PSU and the case.

@pixelgamer83 2 ай бұрын

First video I have seen from you. On the Ryzen have you gone into the bios and set it to run in ECO mode before? Curious also then how the performance would stack against the intel chip. I know a lot of users run their Ryzen chips in ECO mode and say they only lose a bit of performance but the power draw and heat difference is pretty significant.

@kenblaji 2 ай бұрын

KZfaqr Optimum Tech modeled and assembled a 3D printed case of 2.7 liters volume with the same card, but this one is by far more aesthetic and elegant. Indeed the materials can be improved and optimized but I really like what they achieved here.

@wayne8797 5 күн бұрын

My last PC build was 2005 and haven't kept up since. It's crazy how far we have come. These things can fit in my laptop bag ffs lol

@scott5322 2 ай бұрын

The best SFF PC channel hands down!

@Rubble_ZA 2 ай бұрын

Bit late to this but the PSU should have a little more headroom if you're measuring off the wall socket directly. With the peak efficiency being at 94%, in theory you could pull power up to the point the reading hits 265W - probably a bit more though as PSU's generally arent as efficient at such high loads Awesome build though, glad to see more 3d printed cases are taking off as there's so much more potential for new stuff to come to market without the crazy expenses around full metal prototype builds

@Bender411 2 ай бұрын

Really liking the style of case. Wish it was metal.

@baths4carsraspberrypicomputer 2 ай бұрын

small as a couple hard drives but powerful as a beast

@Kirill_Willmann 2 ай бұрын

Good and dense arrangement of parts, I like the design. Strict and minimalistic. The choice of CPU cooler is limited by height. There are rarely video graphics cards with a short metal part. Accordingly, the choice of a suitable video card is also very limited.

@strayzilla 2 ай бұрын

Your channel has started my new hobby of building PC's and trying new cool pc builds for a hobby instead of gaming on them for the most part. Now, if I could only figure out cable management.

@pixel6726 2 ай бұрын

Do you sell the final builds? Or just have a bunch of PCs lying around.

@VerdonTrigance 2 ай бұрын

Wanna see compact mATX cases as well.

@FlukeFIN 2 ай бұрын

About that PSU and melting plastics.. I got a secondhand HDPlex 250W off from a seller who told had it powering a 1050ti inside a Nintendo 8bit housing and it still has some mysterious red markings on its one side, matching really well in the Nintendo-red plastic :D On my system its been powering a 1070 for a year already in open air build, dissipating some heat into aluminium rack its zip-tied to, works well.

@TheUnexpected6 2 ай бұрын

You mentioned no softening or melting of the plastic but at 3:27 you can definitely tell some bending has happened on the right side of the entire build. It's quite glaring, but unassumingly you wouldn't find it. Once you see it you really cant "un-see" it.

@joshbracken5450 2 ай бұрын

More than likely happened during printing. Very common. Usually just bad bed adhesion and is solved easily with leveling, cleaning the bed plate, or using some type of glue adhesive on the bed plate.

@alienzerox 6 сағат бұрын

oh yeah, I see it the bowing on the bed, my OCD would never allow that, especially with the brass contrast.

@MrMorrigan1989 2 ай бұрын

Really like the build, but had to chuckle at Newvember 1:34 :D

@thr3e54 2 ай бұрын

Finally I know I'm not insane

@LouisDuran 2 ай бұрын

I love these small PCs. I thought I had a pretty small build with the IQUNIX ZX-1 case. My case is 9.2L case which could fit 2.5x of the Yocto case. I put a i7-14700 and ARC A770 in my case so maybe the thermals work out better for me. ANyway nice build and nice review.

@TheCuttz1984 2 ай бұрын

Fyi I have had no problem under-volting the 65w 7600. Negative -30 is no problem however I toned it down to-25 as temps were perfect in a Densium with zotac 4070. For when you want as much HP as you get in sub 5l. This build is clean AF btw. Hopefully they release a steel version.

@juanchopistolas8761 2 ай бұрын

nice job bro

@samsara7598 2 ай бұрын

These series is my favorite since traveling alot w my pc sucks and now i just wanna know the best mini pc in terms of performance is

@sm8081 2 ай бұрын

Great content, but try pls with lower tdp hungry builds with this 250W fanless hdplex. It is recommended to use PSU at max 80 percent of its max power supplied. There are 7840HS buil-in mobos in the market with lower TDP.

@orangesock6231 Ай бұрын

i love the vid. i also have a question, could you find a case thats very small for a single slot gpu build?

@Laggah 2 ай бұрын

What are your thoughts about the Minisforum motherboards with built in Laptop CPUs? Would be interesting to see a mini ITX build with the 4060 with one of those like the AR900i which is a 24 core i9.

@ruslan_yefimov 2 ай бұрын

Just get a laptop....

@wric01 Ай бұрын

How about a mini pc build with passive cooling with thunderbolt4 or occulink. Giving users options for silent day to day tasks and gaming loud when needed.

@DazePhase 2 ай бұрын

2 days ago I lowered the volume of my PC from 35 to 14,3 L and now this... Come one man, mine build is with 4060 too. xD Love SFF builds, it looks so clean and portable.

@dbzssj4678 2 ай бұрын

the 250w is for output, given power supplies are about 80% efficient, you can assume that measuring at the wall that the unit is at max input at 120% rated output. On this unit its 300w.

@Weepsy_ 2 ай бұрын

An actually proper looking HTPC

@bounce1721 2 ай бұрын

Amazing build! Can I know the length of your custom cables?

@devyn.johnston 2 ай бұрын

10cm for the gpu, 20cm for the 24 pin, 30cm for the cpu. They’re available at n3rdware.com/accessories/custom-hdplex-cables

@miguelcollado5438 2 ай бұрын

You can place heat resistant/reflecting tape on the inside of the chassis, around the PSU

@throwingfrogs2832 24 күн бұрын

I dont think insulating the PSU would be smart

@TechTyrial 2 ай бұрын

hey i was wondering what is that square dome light at the top called?

@zhenjieliang4680 2 ай бұрын

This might be a dumb question, but is the air circulation of the case compensated because of its size?

@ProfessionallySpicy 2 ай бұрын

So how small can you go with a bit of modding the parts? Like if you were to rethink the cooling for the cpu and gpu, or horizontally mounting the ram somehow...

@SaperPl1 2 ай бұрын

I wish more people advocated for being able to plug the GPU into the single PCB riser in a way the pci fingers can intrude into the motherboard IO. Asrock has boards like this right now, but there's no specific info why.

@lizandrotorres8068 2 ай бұрын

which cable lengths did you get for all your cables?

@marsovac 2 ай бұрын

I'll sticky with my old Raven RVZ01B. It is almost 14 liters, but at least I can have the 7800X3D, 4080 Super in it and 16TB of Jellyfin media. But if I had lower requirements for a PC this would be a cool one.

@leecm 2 ай бұрын

I love the look of tiny cases, but they're too loud in my experience. I left my Louqe Ghost S1 because of the poor thermals and loudness required to keep the CPU and GPU cooled and got a Fractal North. It is silent most of the time, and I have no regrets. That tiny case certainly looks nice though!

@MitternachtAngel 2 ай бұрын

Love the itx from factor but it´s a pain and everithing is more expensive. Now I have a Jonsbo d30 but I´m planing to do a mATX build using a Jonsbo C6 with a Thermalright Assessin 120 for an i7 12700k and sell my 3070 to get a 4060, for the size a heat output. Completly innecesary but will be fun.

@TheSorrowedMan 2 ай бұрын

Amd 7xxx series boost until they hit 90c, if they can, you can change that in bios if you don't like it.

@user-jk5um1om8l 2 ай бұрын

What other possible builds could this be used for? Media server? I’m not gaming on this - but would love to use it for something else. Any ideas?

@RobloxianX 2 ай бұрын

that's crazy, something even smaller than the Velka 3? Sign me up!

@randomtvninja 2 ай бұрын

Little bugged I can't just buy the STL and print this myself, but pretty cool case.. most likely will be my living room HTPC setup

@Miro. 11 күн бұрын

i hope you post the total expense too cause it's a drag too go all over the links just to see it's over your budget

@O4KAST 2 ай бұрын

I think you should try undervolting you GPUs in your builds. I think most sff builders are experienced enough to to this and it would add useful information

@carlosmiguel4756 2 ай бұрын

Awesome build congrats!!! The only potential problem i see here is long term for the PSU! If you're an intensive gamer, constantly pushing the limits, the PSU might die after some months or even earlier! At least 300-350W is mandatory for a system with these specs to be safe in the long term. Now, if you go APU like a 8700G which i think should be the purpose of these tiny builds, then a 200-250W PSU is more than enough :D and i'm probably building one next year with ZEn5 APU!

@caydenpo1001 2 ай бұрын

This man just keeps pushing SFF limits and I love it!

@robertofranco4515 2 ай бұрын

What's limits is he pushing? He's not doing anything but assembling off the shelf components. You should check out Optimum Tech he actually engineers and builds stuff.

@Petardozord 2 ай бұрын

I was thinking about that. I have htc vive on cable and I could wear it with pc and upc on backpack.

@alienzerox 6 сағат бұрын

cool minimalist build thanks for sharing this is the first time I'm seeing a high end GPU that tiny! what would be so cool if this style case could either be milled out of a solid piece of aluminum or 3D metal printed. just a thought...

@pju28 2 ай бұрын

Is it possible the same case to workout with only AMD components?

@henryhau7987 2 ай бұрын

Beautiful

@methia88 2 ай бұрын

I went with z board and 13600k with my small pc so that i could undervolt for better temp on cpu with that noctua cooler as that was my only option to choose from to fit it inside the case

@Neopulse00 2 ай бұрын

I wish the Yocto+ had room for a 52mm CPU cooler. Would have helped a lot.

@cameronsmith5395 2 ай бұрын

what was the rough cost of this build? rounding up to the nearest hundred ish?

@chrismansour5191 2 ай бұрын

Can you make a video on the GEEEK A50 Plus? It's similar in size as the DAN A4-SFX but almost half the price, cheers.

@Wunnabeanbag 2 ай бұрын

Id love to see this guy and optimum geek out idk why😂

@butter_knifed 2 ай бұрын

would a i5 13500 improve performance? or is the added heat not worth it?

@nameresu 2 ай бұрын

I'm looking forward to RTX 5060 low profile or AMD alternative. If it will achieve the same performance as my current 3070, I will build something similar. Or I'll just squeeze 7900xtx into my nr200p, i don't know... Thank you for the video.

@eskimolost2012 2 ай бұрын

with AM5 High Performance Heatspreader with itx am5 and kryosheet would help with thermals better? even with kryosheet on gpu for better temps?

@pmcafrica_ 2 ай бұрын

Brilliant 😮

@SmellsLikeNirvanna 2 ай бұрын

please do one for the 4070 ti super, or 4070 ti, I believe the Inno3d has a very small model for their 4070 ti super.

@antondovydaitis2261 2 ай бұрын

Thank you very much. A quite interesting build. I look forward to learning more about these small builds.

@Who_Does 2 ай бұрын

The Finals looks so slick

@ytuser2093 Ай бұрын

This is a next 15 years Xbox & PlayStation pc build. Great build 👍😀

@Ziquids 2 ай бұрын

The smallest case that can possibly fit a LP 4060, is the J-HACK Pure MK2. Unfortunately they seem to have been discontinued...

@evancassady4846 2 ай бұрын

Should do a collab with DIY Perks!

@heylloe9382 Ай бұрын

Two questions will this work with Intel core i9 and how much does it cost in total?

@liftedsafari 2 ай бұрын

Just a tip for anyone looking at the i5-13400. Just get the i5-13500. It has 8 e-cores instead of 4.

@DengueBurger 2 ай бұрын

More expensive?

@Diogenes77 2 ай бұрын

Where is the link to the case?

@UnskilledGamer691 28 күн бұрын

NICE BUILD ! but this temps :C

@simulalia3297 2 ай бұрын

a mod they can do for the case is covering the sides of the holes with brass and having a lane of brass that runs all across the inner sides of the case. This way the case will act more like a heatsink and it will also look a bit mor cool in my opinion. It will obviously increase the price, but since in this niche is fine spending 150 bucks for a case then why don't have a 170/180 bucks case that has this truly valuable plus?