World's Smallest V8 Engine Hits 10,500 RPM on Nitro (1.7 Cu In 28cc)

Рет қаралды 2,626,214

Күн бұрын

The Run the Smallest V8 RC Engine in the World in at 28cc's and try to hit the maximum rpm.
I first set up the Mini V8 engine, then I open it up to show everybody what's inside, take a look at the bearings the valves the cam.
I then run this engine at full throttle after that I make some exhaust modifications to try to get a better more realistic sound, then I film the engine in slow motion to show everyone how the valve train works with the cams rocker arms and lifter buckets.
About the engine: this is the new Miniature V8 Nitro Engine Toyan / Howan 28cc 2.7 Cubic inch V8 Engine sold by Engine DIY, it's a brand new product that will be released in June.
Here's links to the engine:
Extra 10% Off Coupon Code: Warped
TOYAN V8 Engine ➜ bit.ly/3sGLdOZ
TOYAN V8 Starter Kit ➜ bit.ly/3MpA2SJ
TOYAN V8 Other Accessories ➜ bit.ly/3FSXBAK
TOYAN Rotary Engines ➜ bit.ly/3sH92pW
Other TOYAN Engine & Parts ➜ bit.ly/3yH5lV1
Other V8 Engines ➜ bit.ly/3sCNKK3
Chapters
0:00 Intro
0:49 Opening Engine
2:50 1st Start-up
4:23 Start-up w/mods
5:27 Max RPM Run
6:53 Run No Headers
8:08 Slow Motion Run
↓↓Social media Links↓↓
🐦 ► Twitter: / warpperception
👍 ► Facebook: / warpperception
◙ ► Instagram: / warped.perception
☢ ► IMDB: www.imdb.com/title/tt5548028/?
I sometimes post things early or post previews on FB and Instagram so if you like that sort of thing give them a visit.
Please leave any opinions suggestions or comments Below and don't forget to check out our other videos and subscribe, Thank you.
Watch this in 4k when possible, it looks incredibly awesome !
Carbon 12
www.c12.tv
Produced By: Carbon 12
Directed By: Matt Mikka

Пікірлер: 1 800

@hugostiglitz6914 Жыл бұрын

Wow, a drill the size of a V8. That's impressive!

@davkdavk Жыл бұрын

Hahaha

@paulgonzalez2985 Жыл бұрын

Lol took me a minute but i got it i got it

@z0mb13k1ll2012 Жыл бұрын

I don't understand why he would use a giant m18 drill for this. There are some very nice m12 tools or tools from other brands as well that are waaay better suited to working on smaller stuff

@braydenvandyke7349 Жыл бұрын

He is also a giant

@Suchapill Жыл бұрын

So impressive especially last phaZe when u opened her up she screamed like the real deal.

@sled_neckx9972 2 жыл бұрын

You should try to put a bigger flywheel on it so you can turn the idle down and make it lope.

@type2523 2 жыл бұрын

It won’t turn the idle down , it will just make it accelerate slower but have more momentum when starting to move

@volvo09 2 жыл бұрын

@@type2523 the flywheel itself won't lower the idle, but the added mass makes it less likely to stall at low rpm.

@SamSamuylik 2 жыл бұрын

I agree, it just spins up and slows down too fast...doesn't sound right

@danielbarrett6960 2 жыл бұрын

@Don't Read My Profile Photo ok I wont

@zqzj 2 жыл бұрын

100% bad idea. High revving engines aren't designed for heavy flywheels.

@JRexRegis Жыл бұрын

I love that V8 engines are so monstrous that even a miniature version sounds menacing.

@allenleroy9109 Жыл бұрын

Lawnmower are louder and have a smaller engine.

@nick0164 Жыл бұрын

@@allenleroy9109 loud doesnt mean it sounds good or menacing

@allenleroy9109 Жыл бұрын

@@nick0164 mines sounds pretty menacing..

@nick0164 Жыл бұрын

@@allenleroy9109 true. the sound of 5 blades spinning thousands of times a minute is very terrifying

@lennartsix6102 Жыл бұрын

@@allenleroy9109 actually they dont. This engine has 28cc of displacement and most lawn mowers have around 70

@ComeJesusChrist Жыл бұрын

That’s so much air in the cooling system! Cool little engine, I’d love to have an RC car with this engine.

@davecrupel2817 Жыл бұрын

That thing would fvcking *scream* with this engine in it!

@EAGLINWRX Жыл бұрын

@@davecrupel2817 it would also run out of fuel in a minute

@hxhdfjifzirstc894 Жыл бұрын

The coolant line fittings are letting air in constantly. There's no way to bleed the air out if the fittings let air in.

@wparsons Жыл бұрын

@@davecrupel2817 the power output to weight of this is pretty bad. It makes about 4.3hp, a good competition 3.5cc 2 stroke makes 2.5hp+ weighing a fraction as much, and a decent 28cc 2 stroke gas engine will make over 5hp easily. This is definitely cool, but it won't make a car fast at all.

@ManicMechanic82 Жыл бұрын

@@EAGLINWRX Or less! The fuel tank would have to be much larger and weigh more than the rest of the entire RC vehicle altogether! But then again this is an extremely high RPM! You would need some type of two or maybe even three speed automatic transmission to be feasible!

@LifenSantaBarbara 2 жыл бұрын

Can't wait to see a supercharger on it!

@WarpedPerception 2 жыл бұрын

Hahaha... You know me well enough that's for sure

@zaidkabouk9264 2 жыл бұрын

@@WarpedPerception I think I see something with double supercharge already blown away 🤫🤫

@gen1c8rs88 2 жыл бұрын

@@WarpedPerception Why wasn't the air filter removed ?

@vaz1677 2 жыл бұрын

Cant wait to see It on a RC car

@shelbygtman Жыл бұрын

Damn it, you beat me too it!!!! I thought the same thing about supercharging it ha ha!!!!

@crazyheadgideon 2 жыл бұрын

For temp issue, you should bleed the cooling system better. Too much bubbles in the lines. At least is the first thing I thought. Engine could use some air too, listening to it.😊👊🏻

@volvo09 2 жыл бұрын

He had it setup in a self bleeding way. I believe air is getting in internally, from a seal or something.

@motographics 2 жыл бұрын

That's not the main issue at all here...The reason for all the heat in the block is...is he let it run at absolute max throttle knocking its nuts off for a prolonged time till the fuel tank was completely empty, did not let it idle at all. The result is that the water pump is driven by the belt on the front, no engine RPM = NO coolant flow! hence the lines being hot close to the engine. completely the wrong way to look after an engine.

@brandonbrown3600 2 жыл бұрын

@@motographics The engine can't cool with air in the system. The engine at max ROM should be flowing like hell with coolant but it wasnt. Either there is air in the system or it's cavitating or both. High RPM does not matter the cooling system should be able to keep up just like any other engine in a car etc. If it can its poorly design or has issues.

@3point1415926536 2 жыл бұрын

It looks like the source of the 50:50 air:coolant going into the engine is the hose exiting the overflow tank close to the water level. It's not really an overflow tank if it's directly within the path of the circulating coolant...

@allentoyokawa9068 Жыл бұрын

It is a chinese branded product, don't expect much

@ashiehakoto1490 Жыл бұрын

it sure sounds like a V8, and tbh I love that. when a miniature engine not only looks like and is built exact to scale of it's full size counterpart, and also sounds like its full size counterpart, it makes the gearhead in me grin like a giddy child

@nitroboom1282 Жыл бұрын

There is a dedicated roots style blower kit for this engine so please try it out!

@bikerleo1966 2 жыл бұрын

Now I want to see a mini supercharger on that ! The air bubbles in the coolant lines looks bad maybe increase the size of the water journals.

@mickmuzzmkmz1628 2 жыл бұрын

He'll probably make his own before the factory releases theirs, which apparently they will do, along with actual double over-head camshafts.

@maxpower700 2 жыл бұрын

It is possible to get less airlock stock. Check jhonnyq90s video, very little bubbling👌

@madmaxfarms7980 2 жыл бұрын

Yeah I was thinking the same thing

@cenreaper3221 2 жыл бұрын

@@mickmuzzmkmz1628 That engine actually don't have four camshafts. Just two

@mickmuzzmkmz1628 2 жыл бұрын

@@cenreaper3221 Maybe you misinterpreted my comment, but I never said this engine was double over-head cam, I said it was a possible future improvement for this engine, by Toyan themselves, while answering FAQs. They mentioned possibly supercharging it, making a petrol version, and making it an actual DOHC.

@JoaoZagoSJC Жыл бұрын

Man, Internal Combustion engines are so cool. Thank you for bringing this to us.

@SupraSav Жыл бұрын

Probably a little too small, but making an exhaust for that would have been cool.

@michaelb.42112 Жыл бұрын

0:12 is just pure joy !!!!!

@SawyerKnight 2 жыл бұрын

The internal combustion engine is still mankind's crowning achievement when it comes to mechanical engineering.

@JRexRegis Жыл бұрын

This! The crankshaft moved by pistons alone is such a weird concept, especially with the way the pistons move asynchronously. From a first glance, it doesn't look like it should work as it does, it's so counter-intuitive. And we perfected these things to the degree that they can be mass produced.

@Whateverpoopiepants Жыл бұрын

Personally love engines but no . The large hadron collider .

@hugostiglitz6914 Жыл бұрын

The Hubble Space telescope.

@backwoodsjunkie08 Жыл бұрын

@@hugostiglitz6914 hopefully now to be the JWT!!

@hugostiglitz6914 Жыл бұрын

@@backwoodsjunkie08 Yes, its had a bit of a ding from a micrometeoroid. Hopefully that can be sorted out!

@JoelCreates 2 жыл бұрын

I'm trying to decide which small item makes the most sense to power with this

@WarpedPerception 2 жыл бұрын

I'm not sure what the HP output is I think they said 4.3 HP.

@BearBig70 2 жыл бұрын

I think I'll get one for the kitchen, and run everything off of a long shaft running through the kitchen like the Germans ran their machine shops in WWII. Belt drive for the blender, the mixer, the meat grinder.... She'll really like that. 🤫I think😜

@WarpedPerception 2 жыл бұрын

@@BearBig70 that would be awesome and funny as hell

@01DOGG01 2 жыл бұрын

@@WarpedPerception I don't really understand engines. I just watch videos. But how would its torque rating affect that? My lawnmower is like 2 or 3HP. What would happen if this thing had to cut grass? I imagine that it would just cut out as there's 0 weight behind keeping it moving.

@WarpedPerception 2 жыл бұрын

That's a great question, I think the same things sometimes because they're so small but this one is supposed to be 4.5 horsepower, I absolutely have to test that in an upcoming video

@jeffboyer8214 2 жыл бұрын

That is definitely nice & detailed. Be safe.

@biggerchris20 Жыл бұрын

Hell it sounded like a proper v8 before the muffler cut. Deep throaty sound, and amazing when you hit the throttle. With everything removed sound like an RC boat.

@DaveFromColorado 2 жыл бұрын

I found the disassembly when JohnnyQ90 did it on his channel. But I enjoyed the slow-motion and exhaust modification that you had done, making it much more fun to watch.

@WarpedPerception 2 жыл бұрын

I also disassembled it here, me and Johnny both received prototype engines, and we are both told not to remove the heads. I actually had it before Johnny but I had a previous commitment so he got to release it first.

@DaveFromColorado 2 жыл бұрын

@@WarpedPerception I personally like the slow-motion video of the valve train much better.

@blk77sunshn 2 жыл бұрын

That was soooo cooool !!!!!!! I love these scaled-down engines, they're just mesmerizing to watch! Thanks for the great video!

@carrographymedia9309 Жыл бұрын

This made my day thank you

@logicn.reasoning9744 Жыл бұрын

Donut Media, eat your hearts out.

@rotax636nut5 2 жыл бұрын

Now that's what I'm talking about! try leaning out the mixture another great show, keep 'em comin'

@dennisdempseyradiooutofcontrol 2 жыл бұрын

Cool vid brother! Glad you got an in-depth look at the flanged crankshaft end bearings, 👍👍

@DanielHernandeztinkers 2 жыл бұрын

They listened to you Dennis, looks the same as your fix on the L400 crankshaft center support!!! 👍🙌

@baby-sharkgto4902 2 жыл бұрын

I figured that Dennis would see this 😎

@dennisdempseyradiooutofcontrol 2 жыл бұрын

@@baby-sharkgto4902 yeah been waiting for this V8 since they first planed on making it lol!

@boysinhonolulublue5956 Жыл бұрын

These is a perfect engine to teach kids how to work on engines so cool

@tonygallo8570 Жыл бұрын

It is absolutely amazing with the technology of today what can be done in engines especially for hobby shops they've come such a long way

@DrunkardTV 2 жыл бұрын

Man this is such a cool channel! Love what you're doing!

@raven4k998 Жыл бұрын

imagine powering your car with that thing🤣🤣🤣🤣🤣

@backwoodsjunkie08 2 жыл бұрын

I'm a big RC plane dude and I would absolutely love to see this in something like a scale Spitfire, P-40 Warhawk or Mustang! That would just be absolutely incredible! I know that a lot of those planes in real life were either radial engines or straights but this would look absolutely amazing and an RC aircraft!

@vipervidsgamingplus5723 2 жыл бұрын

@John Connor I think that is theoretical and not literal.

@brandonbrown3600 2 жыл бұрын

@John Connor lol it likely needs the carbs tuned to get running better. The smaller engines work well in RCs no reason this won't as well.

@ericperlot757 2 жыл бұрын

Totally dude! I was thinking the same thing about the WWII model aircraft. I was thinking a RC cigarette boat too.

@jamessaxon2837 2 жыл бұрын

Anything is possible but it will have to carry a lot of fuel

@backwoodsjunkie08 Жыл бұрын

@John Connor I ment just the idea and visual of it. But yes... It has a long way to go before it will catch up to other 4 strokes in the industry like Saito and O.S.

@therandomman6647 11 ай бұрын

Finally! something to do during winter.

@conniedrumjr275 Жыл бұрын

Just about the coolest thing I ever saw

@mr8610 Жыл бұрын

Man, the slowmo beat was sick!

@WarpedPerception Жыл бұрын

Thank you

@gmeast 2 жыл бұрын

proper fuel/air is very hard to maintain for small flows ... so this is impressive.

@backwoodsjunkie08 Жыл бұрын

Very much so!! That's why I lost a few rc planes. So hard to get tuned right.. especially for takeoff when you have a G load on the fuel

@cambridgemart2075 Жыл бұрын

It really isn't, as long as the carb is sized for the flow rates; I used to run 1.5 (0.09CI) glow (methanol) engines and it was easy to get the fuel mixture right from idle to flat out.

@jim7060 Жыл бұрын

That is absolutely awesome thanks for sharing.🏎️

@TheImtoomuch Жыл бұрын

Music for sure! Very cool engine.

@JazzbLu 2 жыл бұрын

Excellent video! Because it blows fuel and oil out of the exhaust, it would be wicked cool to put top fuel like exhaust on it! Maybe even make a rc dragster!

@frankhamilton8257 2 жыл бұрын

FYI, there's a possibility that you'll break one of those exhaust valves if you run this engine for an extended period of time without an exhaust system especially at high RPM. That's why I recommended running zoomies to get the sound you want. Under "real world" circumstances, an exhaust system is there to provide the proper back pressure to enable scavenging of the spent exhaust gases. An exhaust system will also isolate the exhaust valves from being overexposed to O2, which will eventually oxidize them and crystallize their metal composite, making them potentially brittle. You could even put small balls into the ends of the zoomies to prevent water condensation from entering them during or after cool down.

@WarpedPerception 2 жыл бұрын

Thanks! Those are really great details, those are things not many people think about but you're absolutely correct. For sure I am going to make a proper exhaust, I just ran it without the exhaust to see if it can actually get louder or is it like an engine Port size issue... Thanks !

@Mrshotshell 2 жыл бұрын

Backpressure is never a good thing. You will have more scavenging and make more power with less back pressure in almost every situation

@frankhamilton8257 2 жыл бұрын

@@Mrshotshell You obviously don't understand the concept. There's a reason every engine has an exhaust system and it has nothing to do with back pressure or noise. An exhaust system, whether it's zoomies (which effectively produces little or no back pressure) or otherwise, is not just there to direct exhaust gas to be dumped out at some point rear of the driver. From an engine perspective (all other issues aside) an exhaust system is ideally designed to "tune" the air flow as it travels through the engine (particularly in an engine with normal induction), and while doing so, provides a certain level of protection to the exhaust valves from being exposed to ambient air, which will ultimately weaken or fatigue the alloys in the metal.

@Mrshotshell 2 жыл бұрын

@@frankhamilton8257 I never disagreed with that part at all, just the part about needing backpressure

@nerd1000ify 2 жыл бұрын

@@frankhamilton8257 My understanding is that the issue with no headers and the valves is thermal shock, i.e. cold air hitting the 800+ degrees C valve cools it very rapidly, over time this can cause cracks to grow in the valve until it breaks. Should not be a serious issue for such a small motor, smaller valves generally don't get as hot because they have more area to conduct heat to the head relative to the amount of heat they absorb. Also glowmotors run on methanol with a hefty dose of oil (usually 20% or so), which naturally burns a lot cooler than gasoline. More broadly, I suspect that this is an engine specific issue. Many WW2 fighters had 'stub' exhausts, the 'header' if you can call it that was no more than a short nozzle that directed the exhaust flow backwards as it came out of the ports on each cylinder (for bonus jet thrust!). These would surely be candidates for the thermal shocking issue, but on the contrary most of them had more trouble with burnt valves than cracked ones, leading to the use of sodium cooled valves, stellite valve seats, etc.

@shelbygtman Жыл бұрын

I just love your videos bro, keep up the awesome work... I'm a fan for life!!!!👍

@mannyacosta4356 Жыл бұрын

Amazing nice thank you for the video👍

@FharishAhmedPortfolio Жыл бұрын

I came back to watch this video again. Donut Media literally bumbled their video on this one.

@UltraMagaFan Жыл бұрын

Id totally love to see this engine in an RC drag car. I bet that thing would fly.

@stoker20 Жыл бұрын

They already went 200mph in 100ft.

@wparsons Жыл бұрын

Nope, it's heavy and not that powerful at all for it's weight. A good 2 stroke gas engine will weigh much less and make a bunch more power.

@christiansanden8005 Жыл бұрын

@@wparsons Agree beside that thing would take a lot of fuel

@TheTonyMcD Жыл бұрын

That thing is adorable!

@petrholusa5855 Жыл бұрын

This is mental! I was really thinking what is going on in my 5 cylinder VW T4 engine when I reach about 4000 rpm. It is really going fast!

@scrotiemcboogerballs1981 2 жыл бұрын

I like it I also like how it looks like a duel overhead cam but only has one cam per head but it’s still awesome I’d love to see how much hp it could make

@technicholy1299 2 жыл бұрын

The VE will be worse for this engine over an equivalent displacement single or dual cylinder just strictly on frictional losses. It's an aesthetic engine, not an outright performer. I probably wouldn't do much to it simply because lubrication is the biggest enemy to an engine like that, especially for an overhead cam setup like that. The other problem is that it's a 4 stroke and an equivalent displacement 2 stroke will blow this thing away in outright power.

@theshadowowl4196 Жыл бұрын

who’s here after seeing Donut Media’s video to see the engine running?

@danyalbradley3403 Жыл бұрын

Yep

@geraldpercheron3227 Жыл бұрын

Super travail ,bravo Monsieur

@vettemaniac2237 Жыл бұрын

Man! That little monster is cool beans!

@Sn0w1981 2 жыл бұрын

Neat! I thought for sure you would also take the air-filter off at the end. Cool to see the cam(s). It's a SOHC dressed up as a DOHC!

@WarpedPerception 2 жыл бұрын

Yeah I meant to actually, I just had some technical difficulties so I was a little bit behind on this one.

@Sn0w1981 2 жыл бұрын

@@WarpedPerception Now to go to the next level, you need to invent a miniature dyno!

@ManicMechanic82 Жыл бұрын

I’m quite surprised that you run this engine without any oil lubrication at all! But I suppose the grease is enough to suffice! Excellent video! I’m a retired ASE Certified Master Automotive Technician, and I’m just getting into building these tiny automotive combustion engines and I’m loving it. I diagnoses, repaired, built, rebuilt and restored my own vehicles and others cars of course. I’m disabled now but really enjoy these as a hobby. I have some really cool steam engine four bangers, rotary even a couple of small Buick nailhead engines like my big ones. These are a blast (Pun intended)!!!

@christiansanden8005 Жыл бұрын

Yeah, I am wondering too how this engine get lubrication, can't run for long time without problems

@ManicMechanic82 Жыл бұрын

@@christiansanden8005 Agreed! Far too much heat for too long will easily blow a piston or valve and much more!!! I wouldn’t run them longer than a few minutes so it’s a good thing the fuel tank is so small!!! When putting mine together I lubricated the short block with some Q tips dipped lightly in Royal Purple that I use in my cars and trucks. This at least gives it a bit of a coating. After some thought I decided to use a five weight that I run in my turbocharged four banger performance engines. I felt anything more would result in hydrostatic failure of the lower engine internals because of the micro tolerances in theses mini monsters. As far as the Cylinder Heads, Valves and pistons Rings are concerned they should be well lubricated fine for the first three to five minutes from the grease. It will melt quickly and coat well! But anymore than four or five minutes I would probably suggest checking it once the entire engine has been given a chance to cool before taking off anything more than the Valve Covers! But if you’re anything like me, that’s just part of the fun!!!! How I’d love to stuff this engine into a die cast car with remote control steering and throttle control. That thing would SCREAM!!!! It would be great to terrorize the mice in the barn with! 😂😂

@christiansanden8005 Жыл бұрын

@@ManicMechanic82 Yeah that V8 would be cool in a rc car but without a real lubrication no way, also the consumation is quite high so it would need a huge gastank, i have several rc cars, one with a 2 stroke OS MAX, running fantastic. Kind of weired that this baby V8 are so expensive and without a proper lubrication, no way to run it long time

@ManicMechanic82 Жыл бұрын

@@christiansanden8005 That’s a fact. I imagine that is why the gas tank is so small! One quick burn and that’s it. At least for a while.

@John-uc6gb Жыл бұрын

Real cool again. Thank you

@paulborgaily9595 Жыл бұрын

Crank it up man!

@lobob420 2 жыл бұрын

was it firing on all cylinders? and maybe it was intake choked? there must be a restriction not letting it rev higher! id love to see that thing on a dyno also :D

@productxtreme4732 2 жыл бұрын

or maybe it's running too rich? idk

@hunterbear2421 Жыл бұрын

i wouldn't want to rev it much higher then 10k plob would start to melt after awhile even with the cooling that why most run away engines stop running they can hit higher then 10k rpm but the stress on the metal and the heat is too much and they break apart

@alloriginal62 Жыл бұрын

Hmm, yeah, build a dyno for miniatures...there's a idea !

@amitpatil1001 Жыл бұрын

I was thinking the same about the intake.

@pistonburner6448 Жыл бұрын

There are so many things wrong with that engine... Cooling, 'oil', intake, fueling, valvetrain (I'm sure it's not sealing properly), it's unlikely to have optimal spark for that engine (even though that's one of the easiest parts),

@hoehere_Gewalt Жыл бұрын

When you see the slowmo run, you really start to understand why V8's have that characteristic sound to them

@SomeD00D01 Жыл бұрын

Ikr

@rudolfjakobsen7300 Жыл бұрын

Definitely music in my ears 🎵 👂🤗

@caseyjones7714 Жыл бұрын

Amazing peace of engering 👌

@OzarksWildman 2 жыл бұрын

I need that bolted on my weed wacker! Imagine having a V8 lawn trimmer with zoomie headers.

@ZeddisDead 2 жыл бұрын

Reminds me of Tim the tool man tailor he was always beefing stuff up back in the day.

@chrissanchez9218 2 жыл бұрын

Should cam it and straight pipe it 😂 I love it

@WarpedPerception 2 жыл бұрын

hell yeah

@THROTTLEPOWER 2 жыл бұрын

👍👍👍

@dclary9071 Жыл бұрын

Listen closely to the music it makes during the slow motion. It's really cool.

@jmd1743 Жыл бұрын

I'm not into RCs but something like that makes me curious about the hobby.

@TheWopper78 Жыл бұрын

You are ridiculously talented! What a freakin knowledge of motors and machining you possess that is admirable

@johnburgess2084 Жыл бұрын

I think that's why he gets these motors -- as an excuse to build test jigs to exercise his machining skills!

@benbentley26 2 жыл бұрын

A man of your talent could build a supercharger for that!! Maybe another episode?

@WarpedPerception 2 жыл бұрын

Yup

@Memo_0215 Жыл бұрын

I need more of this!!!!! You got yoire self a new subscriber

@slickusaf78 Жыл бұрын

Gorgeous

@jeffm4284 Жыл бұрын

Been a while since I wrenched, but sounds & looks like advancing the timing a bit, if possible, would help at the higher end. It was spitting a ton of fuel after you clipped the headers, so you reduced the back pressure to force secondary burn. Maybe a slight tweak of advancement would allow a more complete burn.

@tomrandall4871 Жыл бұрын

I believe that extra fuel is caster oil and is how the engine gets it's lubricant into the cylinders. Usually these engines are glow plugs and are designed to already run advanced. Hence the nitro / caster oil mixture in the fuel.

@MrDaranel Жыл бұрын

You guys are speaking a different language and I love it

@cambridgemart2075 Жыл бұрын

It's a glow engine, so it has no ignition timing as such.

@adammorris3082 Жыл бұрын

I was thinking the same as the other guys have mentioned-there's no advance and retard on a glow plug engine but I'm sure I've seen another vid with this v8 and he had timed spark plugs (JohnyQ90 I think)- I guess with the programmable tech you can buy (Arduino Etc) you could make a proper mini ECU these days too. All the best.

@911delorean 2 жыл бұрын

This made me think of a really cool idea. Build a rc car around this engine, with a transmission if possible. Hook it up to a PC racing simulator. Drift around a parking lot, or make a racetrack. I could see it becoming a new motorsport. Welcome everybody to the Warped 100.

@WarpedPerception 2 жыл бұрын

I've been totally thinking about that for a long time now... And it's so crazy that you said that because I literally in the last 4 months pulled together all the components to make that happen in a video... We think the same! That's nice

@BabyJesus66 2 жыл бұрын

@@WarpedPerception I want to see that video when you get it done that would be awesome! 👍

@osamabinladen824 Жыл бұрын

@@WarpedPerception Count me in as your sponsor.

@thesquatch9821 Жыл бұрын

Now the question is which vehicle is going to be built around it

@cuda426hemi Жыл бұрын

LOL only if you could pull a trailer of Nitro otherwise 2 minutes doesn't cut it. Nice idea but it wouldn't work. 🚗

@benblakemore4195 Жыл бұрын

WOW ITS SOOOO COOL BRO!!!!

@Adam_Smith-08 8 ай бұрын

Woow soo cool! I wanna see it on road

@k-dawg58 Жыл бұрын

Who came across from donut media ? 😂

@tslim250 2 жыл бұрын

I'm thinking at 28cc it might be able to power a super lightweight go-kart... obviously only to about 2 mph but it theoretically might be able to do it with enough gearing advantage...

@nomusicrc 4 ай бұрын

I love that this video is on the company's website

@zigandarov 10 ай бұрын

Cool good energy motor 👍👍👍

@exaltedb 2 жыл бұрын

The thing honestly sounds almost like a baby nascar engine. Love this little monster

@THESLlCK 2 жыл бұрын

sounds nothing like a nascar at all lol

@mrpayne508fr8 2 жыл бұрын

@@THESLlCK it does with the full muffler. After cutting and removing it's just like a chainsaw

@AfroMyrdal 2 жыл бұрын

It sounds like Its choking, do you think it's getting enough air? It sounds good though, and looks awesome!

@WarpedPerception 2 жыл бұрын

Not enough air at all.

@allentoyokawa9068 Жыл бұрын

It is a chinese branded product, don't expect much

@meko8874 Жыл бұрын

@@allentoyokawa9068 Unfortunately at the moment you can only count on this chinese brand, as a consumer I do not care where it is produced, not to mention that most people are tired of this cliché, you like weeb so much should know how the evaluation of japanese products in the last century is rising, now you criticize chinese goods are just like the pot calling the kettle black.

@yassinehariri5403 11 ай бұрын

this is sick!

@minecraftter6181 9 ай бұрын

Revving Miniature V8 engine to MAX

@fangthewarrior 2 жыл бұрын

It would be awesome to see these in a chassis! As a nitro RC. There are kits available and wouldn't be too hard to put this in 👀 Perhaps you could even make a mini Supra modeled after yours

@TestECull 2 жыл бұрын

Save your $1,700. This thing overheated when it wasn't doing anything more taxing than spinning its own flywheel because the cooling system is woefully inadequate, it can't breathe, it didn't even live up to the 12,500RPM promises in the pre-release marketing spiel, and it clearly has issues with staying running at lower speeds.

@AndrewMalkin 2 жыл бұрын

@@TestECull His coolant had tons of bubbles. It's hard to tell how well it cools when it wasn't bled well.

@TestECull 2 жыл бұрын

@@AndrewMalkin It should self bleed without any issue. The fact that it didn't, combined with the fact that the radiator was still pretty much room temperature while the engine was screaming hot, tells me the water pump, cooling passages, pipework, et-al is just not up to task.

@BIGREDTECH 2 жыл бұрын

JohnnyQ90 runs a couple of these small engines on his rcs

@BIGREDTECH 2 жыл бұрын

@@TestECull I think the hoses were waaaaaay to long. Imagine putting that amount on a vehicle. It’ll do the same

@pingustrasse 2 жыл бұрын

I´d love to have a toyan engine, but I can´t have fuel in my house so I have a stirling engine. Nice video man, greetings from Spain

@gregtaylor6146 2 жыл бұрын

May I ask ..... WY can't you have fuel in your house (in Spain?)

@pingustrasse 2 жыл бұрын

@@gregtaylor6146 Cause its very weird to have a fuel tank or something in a flat hahah

@gregtaylor6146 2 жыл бұрын

@@pingustrasse - so, NOT a 'house' then????

@pingustrasse 2 жыл бұрын

@@gregtaylor6146 nope, I live in the 5th floor of a building

@gregtaylor6146 2 жыл бұрын

@@pingustrasse - Again, NOT a 'house' then, which is what you claimed originally. (Jeeezus, it's like teaching chimps!!!)

@thureintun1687 5 ай бұрын

One of the cutest things ive ever witnessed on KZfaq!!!!!!!!! 😃😍😍😍😍

@josevilla3709 Жыл бұрын

This is a man's definition of, aww so cute

@michelhickey5765 Жыл бұрын

how hard would it be to connect this to a automatic transmission lol, would make a epic RC car

@Jonathan-qi9rh Жыл бұрын

It would probably need a fuel tank bigger than the car itself if you want to enjoy it long enough

@christiansanden8005 Жыл бұрын

@@Jonathan-qi9rh Yeah it seems to be that it takes a lot of fuel just like the real V8 does, LOL

@allgoo1990 Жыл бұрын

This is not a toy, but a serious machine.

@ManicMechanic82 Жыл бұрын

Agreed!!!!

@gyrgrls Жыл бұрын

Q: What did the short fat cactus say to the tall skinny cactus? A: You can't be Cereus!

@BumbleBeeJBG Жыл бұрын

Then why did I cackle uncontrollably with joy when I clicked the link and it fired up?

@Mika-ph6ku Жыл бұрын

You could put it in a toy though

@gyrgrls Жыл бұрын

@@Mika-ph6ku Yes. My wife is into that kind of stuff. No need to be all together, as well.

@DomVito87 Жыл бұрын

This has giving nitro a second chance and I love it... I have their single cylinder nitro engines an I love them

@DJscustommusic Жыл бұрын

its my dream to run all the mini engine you own on many different fuel with you in person just to experience it in person and im your biggest fan ive wtatched almost all your videos.

@Ghostingmark Жыл бұрын

Whos here cause of DONUT ?!?

@xjmg007 2 жыл бұрын

Collector's merged into an x-pipe to duals would sound the best imo, you'll pick up some scavenging and drastically improve the sound. Either that or headers merged into a single large pipe.

@WarpedPerception 2 жыл бұрын

I think you are correct!

@xjmg007 2 жыл бұрын

@@WarpedPerception yep, I see a lot of comments about back pressure being needed, it's simple not true, you do need some length for the header to keep the valves living. The back pressure argument has been disproven many times I've read that in the comments quite a bit. As drag racer it's simple not true, any back pressure will hurt power if the exhaust is designed efficiently to scavenge.

@shawnbrown6544 8 ай бұрын

Like to see it with a scatpac exhaust system

@DRCVideos Жыл бұрын

I'm going to watch all your Videos

@FaisalReacts Жыл бұрын

looks like a full original size V8 engine 👍

@locouk 2 жыл бұрын

I’m not keen on nitro engines, they’re too messy to run. China needs to design a wet sump, oil pumped gas V8 the same size to be a winner in my eyes.

@nutsackmania Жыл бұрын

Yeah "China" get on it! Do hard work in exchange for money we print. America demands serious toy V8s.

@micahelijaheguia3671 Жыл бұрын

make for it an twin turbo setup

@hezi973 Жыл бұрын

You should open up design and fabrication school and people will line up. Your videos are a joy for us simpleton that still use an angle grinder and a drill to fabrics parts.

@mrsimo7144 Жыл бұрын

Amazing.

@dion_aldi 2 жыл бұрын

Remove the air filter, put twin turbos, and slap a tank of NOS lol 😂😂😂

@nasrollahambor6746 Жыл бұрын

still @DonutMedia was unable to build it

@bobsyeruncle4841 Жыл бұрын

its a work of engineering ART

@nicolasharmony4537 Жыл бұрын

3:56 is just like owning a V8 in real life

@P_double_H 2 жыл бұрын

It's misfiring badly... When you have so many cylinders, you need a proper ignition system. This engine needs real sparkplugs and an Electronic Ignition System to create organized firing inside the cylinders.. It's a shame they did in Nitro intead of pump gas. No oil pump either. Improvements need to be done here.

@eljaibas16 2 жыл бұрын

I doesn't even have like a proper oil sump, the crankshaft only gets lubricated be the nitro-oil mix that passes through the rings

@P_double_H 2 жыл бұрын

@@eljaibas16 I wouldn't have approved such a crappy engine system to be taken to production... I mean, how is this supposed to compete against a brushless motor.. let's not even talk about price differences.. a premium brushless motor is about $200 bucks.. 8 times cheaper, and 20 times cleaner. This engine needs: *Proper Ignition System with coil box *Real sparkplugs *Crankshaft position sensor linked to ignition computer to tell the sparkplugs when to fire. *Oil pump to bring oil to the head. *Piston Ring sets to increase compression and something extra but really nice: *a hydraulic torque converter to be able to use combustion rc engines in rock crawlers... centrifugal clutches suck at low rpms.

@lsxbigblock6524 2 жыл бұрын

@@P_double_H but they dont sound like anything special. who cares about your dewalt BLM rc car

@P_double_H 2 жыл бұрын

@@lsxbigblock6524 what are you talking about man.. did you even read. What car are you talking about.. you need social skills for your soul.

@christiansanden8005 Жыл бұрын

@@P_double_H Agree, for that kind of money it should have a real ignition and lubrication system, expensive toy beside it takes a lot of fuel, awesome tough

@shannonsisk 2 жыл бұрын

This is really cool. However it blows my mind that there is enough demand for these to sustain a business, even though you can buy a REAL engine for much less. Still very cool.

@christiansanden8005 Жыл бұрын

Yes I am wondering to, 2 grand is a lot of money for that toy

@rafcion6726 Жыл бұрын

can't wait to see that supercharged

@RacermanXtreme Жыл бұрын

Every 90s/00s game publisher: DANG IT THEY FOUND OUR SECRET V8 ENGINE NOISE SOURCE

@davidaustin2172 Жыл бұрын

Excellent. Sounds great! Just one thing, where’s the oil? Didn’t see you put any in, yet it dribbles out of oil seal. Also, camshafts etc lubed with grease! Never seen that before!

@tomrandall4871 Жыл бұрын

Does the starter disengage? Or does it spin? If it spins and the engine is at 10,000 rpm and the ratio of the starter is say 10:1 looks much higher, that would indicate 100,000 plus rpm at the starter.