Everything You Need Is Here.. www.perfectpassrc.com/
Пікірлер: 655
@RazShifrin8 ай бұрын
Everything You Need Is Here.. www.perfectpassrc.com/
@DynoRC2 жыл бұрын
As someone who builds RCs from scratch, he's one of the best I've seen, there are small things that could be done better, some small touches, but overall you can trust him with everything
@mikedrop44213 жыл бұрын
"I'm not a soldering guru I've just done it 3k times" That's the kind of non-arrogant self confidence I appreciate in a craftsman. Well done. I'm no guru but like you I've done a thousands of times and that looks good to me.
@vonster223 жыл бұрын
WHEN I STARTED FLYING DRONES.. IT WAS LEARN TO REPAIR IT OR GIVE IT UP ..
@kris-english3 жыл бұрын
I can't believe how far RC cars have come. My last one too AA batteries and the cat used to chase and attack it. 153mph well done, sir!
@Tegridy_Rc3 жыл бұрын
You are like top gear for Rc cars lol
@thomasb82193 жыл бұрын
But definitely not Captain slow
@Alonzo2hard3 жыл бұрын
Y’all better watch out for Kevin tablot
@mojaverc15853 жыл бұрын
@@Alonzo2hard tablot
@BurnDuration3 жыл бұрын
Wow. As a professional mechanical engineer I am absolutely impressed with how well put together the build is, and the great attention to detail. I thought my homebuilt 6s car was fast, but your car is a ROCKET. To sort out your driveshaft issue, and FEA software would help, and a CFD software would definitely help sort your high speed lift problem.
@hassanghori93593 жыл бұрын
I mean, just the craftsmanship, the production quality, and the WEALTH of information you provide is incredible. Best RC related content on KZfaq, hands down. Thanks for sharing everything that you do with the rest of us. Really appreciate it. 🙌🏽 Love and respect from Pakistan.
@KashifJarwar3 жыл бұрын
Yes He is Crazy about Rc. Me also from Pakistan. I also make rc cars, rc Airplanes etc.
@RazShifrin3 жыл бұрын
Thank you so much!!
@stephenmanion34183 жыл бұрын
i agree.!!!!
@3runnerBL3X2 жыл бұрын
Never have I seen an RC car that looks like it it's trying to survive for the sake of science. A noble way of life indeed.
@bigboy11213 жыл бұрын
Him and Kevin are battling for the record lol Love the car btw
@robharry44533 жыл бұрын
only i cant See Kevins being a success
@Sammyb_rc3 жыл бұрын
kevins not got enough experience w this stuff, i mean look at how many high speed cars this guy has
@robharry44533 жыл бұрын
@@Sammyb_rc I don't even think it's that I think he has just gone POWER with out thinking through all the weight his is carrying in the car. Most of the extra power he is putting is just going to be used up trying to get the weight moving. Plus spent soooo much money and I don't think it's even hit 100MPH yet
@bigboy11213 жыл бұрын
If works on his arrow dynamics i think he might have a chance
@rauldelgadillo84473 жыл бұрын
If Kevin ever runs it.
@mezz6043 жыл бұрын
Im glad i dont have ads
@Grychon3 жыл бұрын
That's the best hour and fifteen I've spent on KZfaq. Amazing build with some great engineering 👍
@RazShifrin3 жыл бұрын
Thank you so much!
@daytona39273 жыл бұрын
Absolutely, I was mesmerized.
@cernst293 жыл бұрын
Right? I couldn't stop watching.
@basicsyphilis83 жыл бұрын
At work & was sucked in that I didn’t even notice it was an hour long 😅
@tracybassett91102 жыл бұрын
@@RazShifrin thank you raz this is the first time i ever suscribed to a channel and i look at a lot of internet you tube
@Captinfun1013 жыл бұрын
Another well put together vid Mr Shifrin. You explain everything really well. Also all the tips and tricks you share. I hope you get all the record’s your chasing. Peace from Australia.
@RazShifrin3 жыл бұрын
Thanks!
@tadyoshi36103 жыл бұрын
This is a very impressive video. I love seeing the problem that arise from going so so crazy fast.
@Paxmax3 жыл бұрын
Pushing that envelope!! Amazing stuff!
@SKISMONE.6663 жыл бұрын
Mr Super Clean indeed. Love the symetry in your build. The wiring looks sleek. Those duel motors are sick. All tied in to a carbon fiber chassis. A masterpiece.
@seanclarke40613 жыл бұрын
Raz I love this style of video man. Super entertaining and you are brilliant in the workshop and at explaining complicated stuff. Instant sub bro!
@krisallen64663 жыл бұрын
Raz is the goat of carbon fiber! Love the collection man, I’m jealous!
@ianvtonder3 жыл бұрын
My OCD loves this video !!
@rccircuslee53903 жыл бұрын
Beautifully engineered, love the build.
@davidchennellsjr.67993 жыл бұрын
Thank you for this video. Watching the first time wasn't enough, this kinda craftsmanship top notch. I still love the ground missile body. Looking forward to the next version of this monster. Have a great day and good luck with the move
@stuartj98423 жыл бұрын
keep the videos coming your the wizard of rcs so much information and so easy to understand
@MsArjun11113 жыл бұрын
Absolutely amazing!
@kevinwalker71023 жыл бұрын
Raz! You have a gift! Watching your videos shows just how much experience you have. If I was a RC manufacturer-I definitely would be throwing mad cash your way to get you on my team! Experience is key!
@RazShifrin3 жыл бұрын
Thank you!🙏🏻 Many out there are very experienced i feel, we are all just very passionate about the hobby:)
@kevinwalker71023 жыл бұрын
Yea but don't cut yourself short! I don't think People really understand not only the time it takes to have the experience you have let alone the amount of time it takes to cut the videos you do. Plus I enjoy how you take pride in what you do. Everything always looks clean & professional. Some of those guys out there have alot of followers etc, but they are quick to pull out a hot glue gun or just slap things together. With you I see the passion & pride. When educating-educate by showing the right way to do things & I feel that's what you strive to do. #madrespeact Wish you nothing but more success. You've earned it in my book!
@cernst293 жыл бұрын
What you do with these cars is absolutely amazing.
@ChiefRickyRC2 жыл бұрын
Lemme put this channel in my cart! Awesome neat tools make the builds soo much more fun! Thanks Champ
@jonlewis7583 жыл бұрын
Excellent video Raz. I hope your move is going well. Cant wait to see your new setup.
@2testtest23 жыл бұрын
You should really consider getting a mini-mill and mini lathe. That would open so many possibilities for you to create custom parts for stuff like this
@oldbatwit51023 жыл бұрын
That's so vague. I t shows you don't know what you are talking about, or what they want.
@2testtest23 жыл бұрын
@@oldbatwit5102 Interesting. I can be more specific if you like. I'm very familiar with mini-mils and lathes, and their capabilities. Probably spent more than 100h using mine, and accomplished many things with them lesser hobbyists claim to be not possible. Specifically cutting materials such as stainless and titanium, and hitting my targets dimensions within 0.02mm consistently. I think I got that part down. What specifically do I think it would help with for this project? Making stronger axles specifically. How I hear you ask? Put simply, use strong materials such as titanium or tool-steel to make them, and make them a larger dimension then the commercially available ones, along with larger cups to accept them. Why do I think he would like to have this ability? Obviously from the video he has spent a significant amount of time and money trying several different options, all of which failed without being able to extract the potential of the car, which I presume was the purpose of this project.
@oldbatwit51023 жыл бұрын
@@2testtest2 You are a real hero, especially when you make the impossible happen. You plainly have so much to teach these rank amateurs.
@2testtest23 жыл бұрын
@@oldbatwit5102 Hero you say? More like wasted way to much of my life wading through "all" the information about the subject, reading mostly about how frustrated people and "know it alls" from industry bash these little machines. It is true that if you try to run them like industrial size machines, and use industrial size tools they don't work well. If however you use the tricks most machinists reserve for very difficult cuts, and get the tools that are designed for the small cuts these machines are capable of, you can get good results. Lots of reading and watching videos, and lots of trail and error to figure it out. If there is anything to learn here it's that if you put in enough effort, sometimes you get good results. :)
@oldbatwit51023 жыл бұрын
@@2testtest2 Ah. Something I can believe. We probably follow some of the same youtube channels.
@88davidw3 жыл бұрын
I just love this project. Also your videos and builds are so good! Really looking forward to the future of your channel.
@RazShifrin3 жыл бұрын
🙏🏻👍🏻thanks!
@SimonPass2302673 жыл бұрын
Great video, really enjoyed the engineering. Trial and error. That's what it's all about.
@JB-id4eh3 жыл бұрын
Hey Raz keep doing you.Thank you for sharing.
@riconieves74873 жыл бұрын
You are one of the best in building RC cars keep up the good work
@ricerboi52203 жыл бұрын
You are the best rc speed runner I’ve seen
@RazShifrin3 жыл бұрын
Thank you.. just very passionate about it many are just as good
@basicsyphilis83 жыл бұрын
Watching this breakdown into a build gave me the boost I need to open up my car & try some things out. Thing crazy starting with some simple breakdown so I can get the hang of it. Thanks a bunch this video definitely helped me & that hour zipped by 😅 Laters 💥✌️
@GrimJerr3 жыл бұрын
So many great tips on building even if you are not building a Speedbuster.
@robsrcinsanity12203 жыл бұрын
Great info. Thank you. 👍🍻
@allenglishknives68233 жыл бұрын
What an epic video!!! 💪🏻
@ja4son2 жыл бұрын
Love the detail in this video. not too many guys who are this thorough with their setup. This channel deserves much more attention :)
@jtveg3 жыл бұрын
Great work. 🔨🔧🔩 Thanks so much for sharing. 😎👌🏼
@jk-mm5to3 жыл бұрын
I learned a few tricks from you. Thanks!
@sethdale47218 ай бұрын
Love going back and seeing you try to figure some of this stuff out. Nice video
@choke6663 жыл бұрын
RE-REWATCHING. SUCH A SIIIICK BUILD.
@jonbeargenx3 жыл бұрын
While Kevin has no idea and thinks that power will solve everything, this here is the scientific approach that I am sure will provail in the end. Good job and good luck!
@jessewells80873 жыл бұрын
After watching this video I’m going to work as electronic to wire house and more lol. Thank you for letting me know about all this and also math lol
@davenezrapappas45893 жыл бұрын
Look man been thinking this for awile... Win the X prize for fastest land car. You need to step into gear driven jets (turbofans) they got em for RC boats (prop). That may get you close. Your first big goal? THE SOUND BARRIER. First unmanned wheeled vehicle to go faster than sound. If you heed my idea then you will understand no manned wheeled vehicle will EVER GO FASTER THAN UNMANNED! Hey who knows? You may be trying to catch my cars and have the fastest rc on earth. Absolutely love your channel by the way.
@terunaidamanmalaya3 жыл бұрын
So crazy i love it
@rwardenutube3 жыл бұрын
Great video & sweet car - Its nice to see someone coming at it from an engineering point of view. I've been rebuilding several of my cars to make them bash-proof. I noticed you cut the carbon fiber dry - I've been using a Diamond Ring saw (typically used to cut glass), as it uses water (so no dust) and cuts through the carbon fiber panels like butter. You can cut curves, and with a split ring blade, you can even cut inside features (large hole cutouts)
@monkeyknucklerc29793 жыл бұрын
just a mechanical suggestion, the drive shaft cups should be 90 degrees to each other. when they are both in line, the centrifugal force tries to throw the shaft out of alinement. This is how 1:1 car drive shafts are clocked.
@Graham_lee3 жыл бұрын
loved your build, good video skils and music was also nice well done
@cnuauk3 жыл бұрын
my congratulations for what is quite an achievement and sharing with intent from scratch. I got exactly what my search really sought, how not to build a remote controlled car that I would have loved as a toodler. I'm full of satisfaction with the unrestrained scope creep in the 150mph ballistic missile outcome. Thanks for sharing :-)
@bobbybanks13853 жыл бұрын
I'm addicted to dat sound!!!!!
@BadApe3513 жыл бұрын
Awesome video Raz. Fascinating how you go about troubleshooting the bugs. Keep trying...you'll get there in the end. You remind me of the land speed record pioneers of days gone by.
@RazShifrin3 жыл бұрын
Thank you!
@CristiNeagu3 жыл бұрын
28:21 The idea is that it's easier to heat up the wire by itself and get it tinned, which in turn makes soldering easier because it not only distributes heat better in the wire, but also helps with thermal contact. You don't have to do it, but it does help, especially if you're soldering near heat sensitive parts.
@andreassikora2983Ай бұрын
Awesome. I love it. Thanks for sharing
@williamphillips1922 Жыл бұрын
I love how in dept and thorough you are with explaining everything. Greatly appreciate it 🙏 keep these amazing videos coming and I wish you all the best in all endeavors
@rattymahatty84563 жыл бұрын
The subtle delivery of the line made me LOL! 0:27
@kv23153 жыл бұрын
i wish someone would build an rc airplane with that power. but tbh thats one really crazy car! i love it! 👌🏻😊
@just7193 жыл бұрын
This is professional!
@semil.2 жыл бұрын
Tanks for the best tips for me🙏
@velko24333 жыл бұрын
This is amazing
@NVMDSTEvil3 жыл бұрын
Would it be worth adding a down-force sensor (or two) with a wing (or two) that automatically tilt to keep downforce on the car? :)
@rockyloccgarage20403 жыл бұрын
Like rob dahms rx7 needs
@BH4x0r2 жыл бұрын
I would use an arduino nano with a loadcell and a pair of servos to control the wing angle
@Woolypopopeepee3 жыл бұрын
Awesome!
@jerrysimmon9113 жыл бұрын
🤯 that thing sounds dang near like a real super car blowing by you.
@__--JY-Moe--__3 жыл бұрын
nice video! Thanks!
@JakeDownsWuzHere2 жыл бұрын
such a clean workspace and build. great work!
@scottthompson24813 жыл бұрын
Love this channel , great video . All the best ................
@B4KERBOY833 жыл бұрын
Loved watching that as I came in after you built it so was really cool to see you build it. 👌🏻
@neilpro183 жыл бұрын
GREAT JOB VERY IMPRESSED
@DrJT-ly3vr Жыл бұрын
Love this video... Start to finish
@harisbennington40583 жыл бұрын
Quite possible my favourite sounding car ever
@PeasantNo.4713 жыл бұрын
Sounds almost like an angry kawasaki🏍💨
@endliberalism43053 жыл бұрын
Dude you are serious about your shit, and you’ve got the knack to be a sports caster of sorts, the energy, the hype, it’s good stuff bro keep it up
@cliffsrc58383 жыл бұрын
Such a beast
@LukesVintageRC3 жыл бұрын
Luv your determination sir, true inspiration to me and my lil rc channel.🙏
@Bang_n_slang3 жыл бұрын
That thing is a beast.
@glyflex3 жыл бұрын
Excellent work. Quality footage, great commentary and information. I’m now a subscriber.
@RazShifrin3 жыл бұрын
Welcome:)
@northeastrc27253 жыл бұрын
The tip with the nitro tubeing is great i will be doing this
@FoxMulder_3 жыл бұрын
Amazing build! Inspiring . U got a new sub here :D
@fitfiz Жыл бұрын
Great knowledge raz👌👍
@chriswade39863 жыл бұрын
Awesome dude!
@chriswade39863 жыл бұрын
So what the fastest setup in your opinion? For the any one , limitless, infraction, felony? Esc motor? Gears ? Any other parts.
@matnors802 жыл бұрын
Really enjoy the passing sound
@davidcorbit39313 жыл бұрын
Your work is so clean.....I feel like a total slob now... awesome work !!
@cwwhit0013 жыл бұрын
I really enjoyed watching and learning from you. This is a great build, more power more speed. Maybe a custom built drive shaft is seams to me like you need at least a 1/4 inch shaft milled for the size of your “shaft receivers” ( my terminology may be wrong forgive me), but I hope you understand.
@DNAMG72 жыл бұрын
I can tell this man likes his build clean and he likes them looking uniform
@associatedblacksheepandmisfits3 жыл бұрын
awesome dude.
@stephenmanion34183 жыл бұрын
i like it.!!! very entertaining.!!!! thanks
@gonun693 жыл бұрын
29:57 I'm not a soldering expert either, but until now three people have told me that I should try to avoid that the solder travels up the wire if possible. I think with such thick wires it doesn't matter too much, but thinner wires tend to break right in this place.
@tacomakid35333 жыл бұрын
I looked at the thumbnail and at first I thought this was a bath tub flipped upside down!? Lol!
@davidbarnett71452 жыл бұрын
Thank you for your awsome build viedo. Each time that I watch what you are doing, I learn so much, informative and interesting information.
@sinisterrc32623 жыл бұрын
Love your content brother keep the fantastic work up
@RazShifrin3 жыл бұрын
Thank you so much!
@verigone2677 Жыл бұрын
You are right, you can just tin a few seconds ahead of your actual solder, though my best success with this type of connector is to tin the wire, then hold the wire in the cup, heat the side of the cup opposite of that hole then insert my solder through the hole. This way the hottest part of my joint is at the bottom where a cold solder could crack and short leaving a nice solder on top.
@samcourtrc67673 жыл бұрын
Wow on real ❤️ it
@suchenderw98903 жыл бұрын
Nice work and explentation
@breakitrc80042 жыл бұрын
Good video enjoyed every minute of it And the dog topped it with off good video thank you for you time
@justonjacoby4455 Жыл бұрын
Another beautiful and awesome build raz
@didierneeferc3 жыл бұрын
the receiver is not junk yet! just buy 2 new antenna's! they sell them seperately too! (sorry posting too many comments LOL)
@austinlittlejohn79162 жыл бұрын
My favorite video of yours!
@udluuz87973 жыл бұрын
Nice work!
@SyndicateRC3 жыл бұрын
Awesome car, good job. 👍
@ofipete3 жыл бұрын
When you cut carbon fiber board put scotch tape on the cutting line on both sides of the board. And use a vacuum cleaner with the suction tube clamped nearby. That helps reduce the fiber dust.