WORLDS Easiest Picture Framing Jig!

Рет қаралды 77,952

Күн бұрын

If you want to make Picture Frames with Perfect Mitres, then a picture framing jig is the way to go. Cheap and easy to make, they are a must for any woodworker to have in their workshop. In this video l make an extremely easy Picture Framing Jig for virtually next to nothing that produces 100% Perfect results, every single time!
I hope you enjoy it 👍😁🇦🇺
Before l go on...
Link to All My Woodworking Plans: DiyForKnuckleheads.etsy.com
Buy Me a Coffee.
Please help my Channel to keep producing DIY Educational Content with a small donation. Your generosity is very much appreciated. Many thanks in advance. Cheers. www.buymeacoffee.com/unclekna...
Tools l Use in the Video:
Dewalt Table Saw: amzn.to/3GqQoGV
12” Dewalt Sliding Compound Mitre Saw: amzn.to/3rwG3Fa
Makita Circular Saw: amzn.to/2qmUxV9
Makita Cordless Drill: amzn.to/2pxKK0h
Glue: amzn.to/2UVrUhZ
Safety Glasses: amzn.to/2YQwSAY
Safety Glasses That Can Be Worn Over Glasses: amzn.to/3geVeKw
Hearing Protection: amzn.to/38iipRz
Ways to Support my Channel:
👍 ➡️ Subscribe to my KZfaq Channel: / shaneconlan1
👕 Check out the Latest Swag from our New DIY For Knuckleheads Clothing and Accessories Store!
shop.spreadshirt.com/DIYForKn...
🛠 Tools of the Trade 🛠
Tools l Use, Resource Page:
diyforknuckleheads.com/tools-...
Tubebuddy: Install TubeBuddy for free to help you get the most out of KZfaq! www.Tubebuddy.com/DIYForKnuck... …………..
My DIY For Knuckleheads Website: diyforknuckleheads.com
-------------
SOCIALS:
Instagram: / diy_for_knuc. .
Check us out on Facebook: / diyforknuckl. . …………..
Check out my NEW Spanish Channel! All the same videos but in Spanish! kzfaq.info/love/iJO...
Mailing Address:
DIY For Knuckleheads
P.O. Box 152
Sawtell, NSW, 2452
Australia.
------------
Music supplied by and Released under Creative Commons License 3.0.
Artist: Kevin McLeod
Music Title: Acid Jazz
Have a great day and l’ll see you again real soon. 😁
FTC Disclaimer:
This video is not sponsored. All items are purchased with my own money unless stated otherwise and opinions are my own.
If I do receive products for free, I will always disclose it and I will still always provide you with my honest opinion. This video and description contain affiliate links, which means that if you click on one of the qualifying product links, I’ll receive a small commission if you decide to make a purchase. This does not cost you anything extra and if you don't want to use the links, you can always Google the product separately, no worries. I am a participant in the Amazon affiliate program as well as TubeBuddy and others.
Links are provided for your convenience as well as my benefit. Some links are not affiliated but are shortened to preserve space in description box
#pictureframejig #woodworkingjig #pictureframe

Пікірлер: 220

@Sparky_D 2 жыл бұрын

I've definitely had my share of dodgy framing efforts in the past! I'm seriously impressed with how strong that clue held 👍

@diyforknuckleheads 2 жыл бұрын

Cheers Dave! Yeah the simple glue joint is pretty impressive mate 👍😁🇦🇺

@pabloinla1 9 ай бұрын

Seriously helpful. I'm making a double frame with decorative recessed wood between the two, inner and outer frames. And I'm a novice. A version of your solution will allow each step to be adjusted and fit.😊

@diyforknuckleheads 9 ай бұрын

Thanks mate 👍👍

@philipoconnor2236 2 жыл бұрын

I've been doing wood work for over 25 years and never thought about baking paper to stop glue sticking! You can always learn something new!! A scrap piece of melamine is what l sometimes use but l really like this!!

@diyforknuckleheads 2 жыл бұрын

Yeah the paper works really well Philip...give it a go 👍 Thanks for watching mate 👍😁🇦🇺

@cepaasch 2 жыл бұрын

Simple and effective. Nice jig, thanks for sharing.

@diyforknuckleheads 2 жыл бұрын

No worries at all Chris 👍 Thanks for taking the time to watch mate 👍😁🇦🇺

@CharlieMikeWoodworks 4 ай бұрын

I appreciate your look at things and i love the background music. Thabk you for bringing your knowledge to all of us.

@diyforknuckleheads 4 ай бұрын

Cheers Charlie! Appreciate the feedback mate 👍😁🇦🇺

@user-a33kixd2wq44 Жыл бұрын

omg, u are so clever! So Elegant and simple solution!😍

@peterc1171 2 жыл бұрын

Always a great watch. Thanks for the tips and entertainment 👍👏

@diyforknuckleheads 2 жыл бұрын

Glad you enjoyed it Peter! Thanks for watching mate 👍😁🇦🇺

@johnwalsh6844 2 жыл бұрын

There's always time for tea 🍀⛄

@diyforknuckleheads 2 жыл бұрын

Sure is John 👍 Having one right now as a matter of fact while l'm responding to you 😁

@andrewfike4290 Ай бұрын

This is brilliant

@RobbsHomemadeLife 2 жыл бұрын

simple and works perfect, big thumbs up!!😃😃👍👍

@diyforknuckleheads 2 жыл бұрын

Cheers Robb! Glad you liked it mate....hope you're having a relaxing weekend 😁🇦🇺👍

@davejones2549 11 ай бұрын

I tried this today. Great idea as I was not looking forward to making some small frames for my wife's projects.

@diyforknuckleheads 11 ай бұрын

Glad it worked for you Dave 👍😁

@coldwoodcowboy4525 2 жыл бұрын

Excellent jig! An amazing video as always. Thanks for that!

@diyforknuckleheads 2 жыл бұрын

My pleasure mate 👍😁 Thanks for watching 👍😁🇦🇺

@dosadoodle 2 жыл бұрын

Never fail to laugh and learn new things from your channel. Thank you!

@diyforknuckleheads 2 жыл бұрын

Cheers mate! Appreciate the feedback 👍😁🇦🇺

@alonzohollingsworth7712 2 жыл бұрын

Love your videos, look forward to them all.

@diyforknuckleheads 2 жыл бұрын

Thanks Alonzo! Appreciate you taking the time to watch mate 👍😁🇦🇺

@treebrookwoodworks2225 2 жыл бұрын

Great to see you again Shane! I'm liking this video. It was awesome to see you test the strength of the miter joint. So many woodworkers go on & on about how this type of joint is so weak. And it probably is. But maybe your video might get others to rethink the stability of this type of joint. Great job! 👍 My wife rolled her eyes when she heard your dad joke 😒 Louis 🇺🇲

@diyforknuckleheads 2 жыл бұрын

Hahahahah....thanks Louis 👍 Mate, l've always had the opinion that for a picture frame...if the mitre is wide enough, that a glue joint is sufficient and l think my little test just proved it. No doubt the purists will boo-hoo it but the proof is in the pudding. Thanks for watching mate and tell your wife that l will try better next time 😂 Cheers 👍🇦🇺😁

@LastGamer 2 жыл бұрын

Bloody ripper. Thanks uncle knackers

@diyforknuckleheads 2 жыл бұрын

No worries Joel! Thanks for taking the time to watch mate 👍 Hope you're having a cracking' weekend 👍😁🇦🇺

@Adrianbacon-c9q 2 жыл бұрын

Bloody fantastic, simple but very ingenious, just what I was looking for. Love your videos and appreciate the time and effort you put into making them. Cheers

@diyforknuckleheads 2 жыл бұрын

My pleasure Adrian! Glad you liked it mate and thanks for the feedback 👍😁🇦🇺

@AleksandrFedot 2 жыл бұрын

Как обычно классное видео. 👍

@beautifulinstrumentals2866 2 жыл бұрын

haha. as a dad myself, i have come to appreciate your jokes and feel a responsibility to pass them along to some of my own childrens. I also greatly appreciate the wood working info

@diyforknuckleheads 2 жыл бұрын

😂😂...Thanks mate....hopefully your kids groan after each joke as much as mine do 😂 Appreciate you taking the time to watch 👍😁🇦🇺

@kucelkj Жыл бұрын

That was amazingly simple and it works so well. I'm down and thank you!

@diyforknuckleheads Жыл бұрын

Glad you liked it Ken 👍👍

@mickp 24 күн бұрын

Always entertaining and great tips too. 👍

@diyforknuckleheads 20 күн бұрын

Thanks Mick.....appreciate you taking the time to watch mate 👍😁🇦🇺

@jimbog8327 2 жыл бұрын

Not gonna lie, I was not expecting the glue joints to be that strong. Great video mate. I’ll definitely be making this jig😎😎😎👍👍👍🇦🇺🇦🇺🇦🇺

@diyforknuckleheads 2 жыл бұрын

Thanks Jimbo! Yeah the glue joint is pretty impressive mate as you could see in the demo. Thanks for watching 👍🇦🇺😁

@SteveMonk1956 2 жыл бұрын

I was very impressed with your previous video when you used this jig, thanks for sharing how to make it. Incidentally, I didn't get the Dad joke, first one of yours I haven't got. But leave it with me I'm sure the penny will drop eventually.

@diyforknuckleheads 2 жыл бұрын

Cheers Steve! In regard to the joke, l'm going to let it sit with you for a bit 😂 Thanks for watching mate 👍😁🇦🇺

@johnvodopija 2 жыл бұрын

Great tip knackers! Another entertaining video and the framing jig using wedges is fantastic. Cheers 👍😎🇦🇺

@diyforknuckleheads 2 жыл бұрын

Much appreciated John! Thanks for the donation tool mate 👍😁🇦🇺

@louislandi938 2 жыл бұрын

I got a real bang out of your frame testing! …Joe in NJ, USA

@diyforknuckleheads 2 жыл бұрын

😂....Thanks Joe!

@user-nj6pe8nc5w 6 ай бұрын

Thank you so much what a wonderful idea❤

@diyforknuckleheads 6 ай бұрын

Thanks mate 👍😁 Yeah it works really well 👍😁🇦🇺

@scottmclean4237 2 жыл бұрын

So amazed the plywood had such a solid hold

@diyforknuckleheads 2 жыл бұрын

Yeah it's pretty impressive Scott. A pine joint also has similar holding power 👍👍

@scottydo2103 2 жыл бұрын

Great tip! Cheers, Scotty (Norway)

@diyforknuckleheads 2 жыл бұрын

Cheers Scotty! 👍😁🇦🇺

@thomascornelius7771 2 жыл бұрын

Lots of good info and some great jokes, thank you.

@diyforknuckleheads 2 жыл бұрын

👍😁....Cheers Thomas! Glad you found it useful mate 👍😁🇦🇺

@mohdalisyed 2 жыл бұрын

Great video! Always love your videos.. keep them coming

@diyforknuckleheads 2 жыл бұрын

Thanks mate! Appreciate the comment 👍😁🇦🇺

@Justme-ny9ju 4 күн бұрын

Oh Uncle Knackers, you are a you tube AUSSIE icon. Aussie = metric system sir 🤣

@brianpatmore8418 2 жыл бұрын

Onya Mate, Simple and great jig !

@diyforknuckleheads 2 жыл бұрын

Thanks Brian! 👍😁🇦🇺

@user-fd3sc4dc4x 10 ай бұрын

THANK YOU! A FRIEND ASKED ME TO FIX HER PICTURE FRAME AND I HAD NO IDEA HOW TO DO IT WITHOUT CLAMPS. IT TURNED OUT PERFECT!

@diyforknuckleheads 10 ай бұрын

Well done mate 👍😁

@passilva330 Жыл бұрын

Excelent. I make one. Thanks

@diyforknuckleheads Жыл бұрын

Cheers Pas! Good luck with it 👍😁🇦🇺

@arachosia 2 жыл бұрын

Super clever!

@diyforknuckleheads 2 жыл бұрын

Thanks Kristian! Glad you liked it mate and l appreciate you taking the time to leave me some feedback! Cheers 👍😁🇦🇺

@michellelalonde5318 7 ай бұрын

Love this channel. Great tips that give me confidence to try something new without feeling intimidated by the Festool only, million dollar workshop.

@diyforknuckleheads 7 ай бұрын

Thanks Michelle....glad you find the videos useful 👍😁🇦🇺

@julianhadley3621 Жыл бұрын

Another great tip, Knackers 😊

@diyforknuckleheads Жыл бұрын

Cheers Julian 👍😁

@michaelpackwood639 9 ай бұрын

Hi Shane, What a great tip. I am new to framing and can cut accurate mitres, but still have problems getting a tight join. I have fairly cheap jig that I bought, which is for hammering in corner nails, but it really does not work well. I will definitely try this one. Thanks for sharing your expertise.

@diyforknuckleheads 9 ай бұрын

Give it a go Michael....you'll really like it mate 👍😁🇦🇺

@wavehaven1 10 ай бұрын

Very cool ....That is using the ole noggin. Im gonna do that now, Thanks One good test is the drop test.

@diyforknuckleheads 10 ай бұрын

Cheers mate 👍

@steves524 2 жыл бұрын

Great tip Macca 🪚

@diyforknuckleheads 2 жыл бұрын

Cheers Steve! Hope you're having a great weekend mate 👍😁🇦🇺

@thedabblingdiyer5842 2 жыл бұрын

Will make one of these jigs soon!

@diyforknuckleheads 2 жыл бұрын

You'll love it mate 👍

@ykkfamily 2 жыл бұрын

Love it. Thank you 😊

@diyforknuckleheads 2 жыл бұрын

You’re welcome 😊 It's a great little jig that works really well! Thanks for watching 👍😁🇦🇺

@ykkfamily 2 жыл бұрын

@@diyforknuckleheads love you jokes and tea break at the end. Cheers from Canada ❤️

@raynierllewis2827 8 ай бұрын

Great tip

@diyforknuckleheads 8 ай бұрын

👍👍

@juliuschannel6868 2 жыл бұрын

Good Job and Creative👍🏻👍🏻🤝

@diyforknuckleheads 2 жыл бұрын

Thanks Julius! Appreciate the comment mate 👍😁🇦🇺

@KarmaZeusBoi 5 ай бұрын

You are awesome!

@diyforknuckleheads 5 ай бұрын

Glad you liked the video 👍🇦🇺😁

@terrycrouch1390 2 жыл бұрын

Always so glad to see a new video from you. Learning lots. Love the frame, jig and the strength of it all

@diyforknuckleheads 2 жыл бұрын

Appreciate that Terry 👍 Thanks for taking the time to watch mate 👍😁🇦🇺

@mitchellrutty5001 2 жыл бұрын

Great content as always.

@diyforknuckleheads 2 жыл бұрын

Cheers Mitchell! Appreciate the comment mate 👍😁🇦🇺

@andymiller5611 2 жыл бұрын

Another great video! Keep it up, mate!

@diyforknuckleheads 2 жыл бұрын

Cheers Andy! Always good to hear from you mate 👍😁🇦🇺

@someguy4251 2 жыл бұрын

The day i realised just how strong quality glue applied properly can be it really changed the way i put things together.

@diyforknuckleheads 2 жыл бұрын

Yeah it's pretty effective mate 👍

@ratofvengence 2 жыл бұрын

Love your work mate. The picture frame jig is good too :P

@diyforknuckleheads 2 жыл бұрын

Cheers Ratman! Glad you liked it mate 👍😁🇦🇺

@chipperkeithmgb 2 жыл бұрын

Hello uncle good tips glad you are still using inches from Oxford England

@diyforknuckleheads 2 жыл бұрын

👍😁...Cheers mate 👍😁🇦🇺

@lucilaramirez-cruz9919 2 жыл бұрын

I love your channel! I’m a real novice and I’m learning so much about safely working with tools. I was wondering if you could post a video on how to make a drawer. I’m working on my craft cabinet and I’d like to add some drawers. Thank you!

@diyforknuckleheads 2 жыл бұрын

Glad you find the videos useful Lucila 👍😁 Unfortunately l'm not doing a drawer making video but there are many videos on KZfaq showing how to do it....good luck 👍😁🇦🇺

@stirlingwoodcraft 2 жыл бұрын

Great vid uncle knackers, yeah you should feel very bad about the guy you framed who got ten years😂😂

@diyforknuckleheads 2 жыл бұрын

😂😂...Thanks Thomas! I didn't know that he'd get that long 😂

@guytrace4444 2 жыл бұрын

Great vid fella

@diyforknuckleheads 2 жыл бұрын

Cheers Guy! Thanks for watching mate 👍😁🇦🇺

@lulu8lala8haha 2 жыл бұрын

Impressive

@diyforknuckleheads 2 жыл бұрын

Thanks Monica 😁👍🇦🇺

@frankstoverpurebloodsaltya6441 2 жыл бұрын

AWESOME JIG! Always look forward to your nuggets of wisdom.. I would feel bad as well..10 YEARS? you must have been really mad at that picture " Frame" well done mate..CHEERS! 🇺🇸

@diyforknuckleheads 2 жыл бұрын

😂😂...Thanks mate. I do tend to hold a grudge 😂 Thanks for watching 👍😁🇦🇺

@frankstoverpurebloodsaltya6441 2 жыл бұрын

@@diyforknuckleheads 🤣🤣😂😂

@danbelzile4203 2 жыл бұрын

Hey shane another good project and great tips nackers. Ps u make good jigs. 👍🇨🇦🍺🍺

@diyforknuckleheads 2 жыл бұрын

Thanks Dan! I didn't forget this time 😂

@Ivanat0r 2 жыл бұрын

Great video uncle knackers, but why are you giving the measurements in inches now?

@simonhancock2990 2 жыл бұрын

I agree

@diyforknuckleheads 2 жыл бұрын

Cheers mate! When it comes to basic round numbers l think we are all familiar with small imperial numbers....trying not to alienate people mate 👍😁🇦🇺

@chipperkeithmgb 2 жыл бұрын

Good for inches

@OzSawdustMakers 2 жыл бұрын

Great tip KNACKERS!!!! That looks like a great jig, i'll have to give it a go. If only I knew the measurements, everything was in inches!!! 😂😂

@diyforknuckleheads 2 жыл бұрын

Hahahhahaha.....come on mate!...a man of your great intellectual capacity can convert a couple of simple inch conversions 😂 Thanks for watching Ryan....by the way, l loved your little skit with the other lads on Dainers Insta...Gold! 👍😁🇦🇺

@OzSawdustMakers 2 жыл бұрын

@@diyforknuckleheads hahahah yeah i'm getting a little pedantic in my old age. Thanks for the feedback, i'm pretty chuffed being in such esteemed company with #MMIMinternational

@diyforknuckleheads 2 жыл бұрын

@@OzSawdustMakers 👍😁....Looking forward to seeing what you guys get up to....gotta keep an eye on that Dainer Character 🤔 😂

@TheGrantAlexander 2 жыл бұрын

nicely done! And congrats on the 300,000 subs!

@diyforknuckleheads 2 жыл бұрын

Cheers Grant! 👍😁🇦🇺

@theofarmmanager267 2 жыл бұрын

I’ve been woodworking for 45 plus years. I’ve got this jig (as well as several others) and, within its limitations, it’s very good. However, no jig will make a badly cut picture frame work. It’s not as easy as you might think to get 90 degrees corners. Everything from timber moving under the blade to haveing machines cutting not exactly 45 degrees (setting a machine to cut what your measuring devices says is 45 has in built machine and measuring errors) The easiest way that I know to ensure you have 4 x 90 degree corners - and this will work for all sizes of frames is to take a large piece of plywood (say 600 x 600 x 18mm) plus two pieces that are, say, 300 x 40 x 18mm. You start by mounting the big piece over 2 lengths of carefully cut hardwood which give a tight fit in the mitre slots either side of your table saw or band saw. You should now have a top which slides easily bit not loosely along your top. Now take those 2 bits of 300 x 400 and cut each to 45 degrees - get as close as you can but absolute accuracy is not required, say +/-1/2 a degrees. Now place those 2 bits so that the apex of the (roughly) 90 degree corner that you get when you put the 2 45 degree-ish corners together. The apex of that right angle should be in line with your saw blade and the inside of that joint roughly in line with the saw blade also. Now, with CA glue to get instant bonding and PU glue to get long term strength, glue down those 2 cut strips as described but use a known 90 degree square to make sure that the outside angle is exactly 90 degrees - this is the only part where accuracy is required. When cured, and you can obviously add screws if in doubt, set the jig in the mitre slots and make a cut so that the blade goes through the (nearly) 90 degrees joint but only just through the inside part of those 2 glued strips. If you now cut every corner of any frame making sure that, for every corner, one piece is cut along the left hand side of the strips and the other part is cut along the right hand side, you will always get a perfect 90 degree corner even if one part is 45.5 degrees and the other 44.5; the total will always be 90. So, the only part to really take your time over is making sure that 90 degree angle you make with a square is perfect. One advantage of this jig over others is that it doesn’t matter what size picture frame you are making. After glueing, you can use whatever jig you have: the one shown here is very good but will need 2 of the fixed wedges to be moved to accommodate different frame sizes.

@pteddie6965 2 жыл бұрын

Great jig, Uncle Knackers and the joke wasn't bad either.

@diyforknuckleheads 2 жыл бұрын

Cheers PT! Thanks for watching mate 👍😁🇦🇺

@RiaanOliver 2 жыл бұрын

Some really good tips, I’ve been looking for some picture frame clamping ideas. Also the strength of the joint really surprised me

@diyforknuckleheads 2 жыл бұрын

Yeah Riaan, the glue holds beautifully. The demonstration certainly proved that 👍 Thanks for watching mate 👍😁🇦🇺

@BenHollist 2 жыл бұрын

Love to see a Good 45 Gig thats easy and can be used without a table saw :P As e and 45s HHHHHMMMMFFFFFF 😒😒😒😒😒 Well Done Knackers 😎😎👍👍

@diyforknuckleheads 2 жыл бұрын

Cheers mate!! 👍😁

@pierrecosta3789 2 жыл бұрын

Man your a classic 👍

@diyforknuckleheads 2 жыл бұрын

👍😁...Glad you liked the vid Pierre 👍😁🇦🇺

@fayz44awad 2 жыл бұрын

👌👌👌

@diyforknuckleheads 2 жыл бұрын

👍😁...Thanks Marcous

@danielwoolfe1135 2 жыл бұрын

Love your content knackers, but if you must cater to the inches crowd, please also give mm. Cheers from 'south of the border', down here in lockdown land.

@diyforknuckleheads 2 жыл бұрын

No worries Daniel...will do mate 👍 Heading down your way soon...hopefully all's good by the time we get there 👍 Thanks for watching mate 👍😁🇦🇺

@mohammednovalija 2 жыл бұрын

I was gonna say you stole this method because I just saw it a week ago - BUT IT WAS ONE OF YOURS - Good job Knackers

@colrodrick8784 2 жыл бұрын

Great tip Shane. Wife and I finally got to see both my girls in far flung states the last two weeks. Very cool. Like an overseas holiday lol. But, on way back from Brissie we stopped at IKEA. I got a couple of hobs I can use your hack for inspiration from you snd Sweden lol

@colrodrick8784 2 жыл бұрын

Not hobs jobs!

@diyforknuckleheads 2 жыл бұрын

😂...Thanks Mohammed! Yeah it was just a little follow up video from last weeks picture frame video....appreciate you watching mate 👍😁🇦🇺

@diyforknuckleheads 2 жыл бұрын

Very fancy Col, hob nobbing from State to State....good to see mate 👍😁 Glad to see you managed to escape IKEA....it can be hard to leave that place 👍😁🇦🇺

@craftingwiththebeard4728 2 жыл бұрын

Gold as always, never ever stop the jokes!!!

@diyforknuckleheads 2 жыл бұрын

Cheers Neil...l'll do my best 😂 Thanks for watching mate 👍😁🇦🇺

@jimpike3489 2 жыл бұрын

To Easy Uncle Knucker's, as always a great video and I loved the dad joke. How long did you leave the glue to dry? Nice jig. Thanks for sharing.

@diyforknuckleheads 2 жыл бұрын

G'day Jim! Glad you liked the vid mate 👍 I left the frame overnight as l was doing other things 👍😁🇦🇺

@trudi1962 2 жыл бұрын

I've watched heaps of your videos, but I've never noticed the inch thing. Is that new? (now that you're a superstar in the US)

@diyforknuckleheads 2 жыл бұрын

😂😂....small, whole imperial numbers just sneak in sometimes Trudi 👍

@richardpender2428 2 жыл бұрын

Great video. Seen your picture frame jig in the colosseum video and it was brilliant seeing it being put together in this vid. As for wood glue, I have used it for years and have to agree with you on its strength, where the wood glue joining is actually becomes stronger than the wood itself. Oh and the Dad jokes are getting woefully worse as your videos appear.

@diyforknuckleheads 2 жыл бұрын

Thanks Richard! Yeah thought l'd better do a follow up from the previous vid on how to make it 👍 Yeah, the glue these days certainly does the job as you could see in the vid...a lot of people don't believe it till they see it 👍 As for the joke....l am trying 😂😂 Thanks for watching mate 👍😁🇦🇺

@WasimBarri 2 жыл бұрын

Loved the simplicity, well done but wondered if you do a lot of this with different sizes then your board would end up with lots of screw holes although I'm not sure that's a problem other than aesthetics. Still wondering how a picture can go to jail !!!!!!!!!!!

@diyforknuckleheads 2 жыл бұрын

Jail is full of "framed" people John 😂 If the backboard gets full of holes it 's no big deal...just like you said mate...asthetics 👍 Thanks for watching 👍😁🇦🇺

@Dirtyharry70585 2 жыл бұрын

Thanks for giving up!

@diyforknuckleheads 2 жыл бұрын

😂

@PeterFloyd678 2 жыл бұрын

Great new video from you Uncle Knackers! Do you have a video or can do a video to make sure that your mitre cuts are exactly correct? Do you have a jig for that?

@diyforknuckleheads 2 жыл бұрын

Thanks Peter! The answer to your mitres is having a saw that cuts perfect 45's....you just can't get around it without that 👍😁🇦🇺

@RPmusic06 2 жыл бұрын

Great video unc, loved it!!! How was your weekend? 🍻😁

@diyforknuckleheads 2 жыл бұрын

Appreciate that Rushill! It's been very relaxing thanks mate 👍😁🇦🇺

@RPmusic06 2 жыл бұрын

@@diyforknuckleheads good to hear unc!!!cheers 🍻

@sumosprojects 2 жыл бұрын

Who Framed Uncle Knackers 🧐😁😮, joke borderline terrible but video in mould of Izzy Swan brilliant with wedge’s. I’d buy plans if you had cut dimensions for different sized picture frames. Love ya work 🇦🇺🍺👍

@diyforknuckleheads 2 жыл бұрын

😂...Cheers Big Fella! It's all about the wedges mate 👍 Hope you're having a relaxing weekend mate and thanks for watching 👍😁🇦🇺🍺🍺

@gregedwards1211 Жыл бұрын

Shane, I just watched your video on the world's easiest picture frame jig. How would this go with live edges - I want to make frames where the live edge is on the outside of the frame so I'm not going to have nice square edges

@diyforknuckleheads Жыл бұрын

Mmnnnnnn....not sure Greg. You can always give it a go and see what happens.....good luck! 👍😁🇦🇺

@grahamgee4308 2 жыл бұрын

Help needed on this project. Where do you get one of those Uncle Knackers Stanley tape measure (as shown in the vid) that is 8m, but measures in inches? Or did you just have it in the old tool box from July 1974? Perhaps I’ll ask for one at my local big green store(dad joke). Very nice way to make perfect frames, keep up the good ( mm and inch) work. Cheers.

@diyforknuckleheads 2 жыл бұрын

Haahahhaha.....on special order only Graham 😂....very rare 👍 Thanks for watching mate 👍😁🇦🇺

@gj7557 Жыл бұрын

Fark ... can't believe the glue is that strong 💪. What brand / type of pva glue did you use ? ( I'm in Australia)

@diyforknuckleheads Жыл бұрын

G'day Gj. The glue is Exterior Grade Aquadere which you can get from Bunnings 👍

@ravendark2422 2 жыл бұрын

Long time no see.

@diyforknuckleheads 2 жыл бұрын

Getting back into it mate 👍👍

@jerzysawczuk3837 2 жыл бұрын

Takie proste 👍 ale po co niszczyć taką fajną ramkę 🤔

@diyforknuckleheads 2 жыл бұрын

Thanks Jerzy 👍 I had to demonstrate on something mate 👍😁🇦🇺

@JesperMakes 2 жыл бұрын

Great jig! I'm still trying to grasp the picture framing joke, I might wake up in the middle of the night and start laughing at some point! You struck me as tea drinker, so what do you do with the coffee if someone buys you one? 😁😁

@diyforknuckleheads 2 жыл бұрын

OK Jesper....listen up mate. When you "Frame" somebody, it means you set some innocent person up for a crime which they didn't commit that ultimately sends them to jail.....hence when l "framed a picture" l sent them (the picture) to jail for a crime they didn't commit????? Get back to me 😂 Thanks for watching mate 👍😁🇦🇺

@michaelb1478 2 жыл бұрын

He framed a pitcher (like a baseball pitcher) for robbery instead of framing a picture.

@JesperMakes 2 жыл бұрын

@@diyforknuckleheads Mate! You've just made me understand "Who framed Roger Rabbit" soo long time after!! 🤠🤠

@HomeOfMacWoeffie 2 жыл бұрын

Expensive scrapwood ;) we use it for making concrete molds... a sheet goes here for around €100.00

@diyforknuckleheads 2 жыл бұрын

It's very reasonably priced over here Mac. 👍

@BobMuir100 2 жыл бұрын

Really great jig Uncle however………… I have some 26 frames to make and yes I was messing up many joints, the issue now is they are in at least 6 sizes and I just cannot make a jig for every size it’s just impractical. Any thoughts? Thanks Bob England

@diyforknuckleheads 2 жыл бұрын

Thanks Bob! I see what you mean re the multiple sizes.....perhaps you could use a picture framing strap 👍

@BobMuir100 2 жыл бұрын

@@diyforknuckleheads Well yes I could, however I really do want to use your jig as it’s so very handy and effective! Anyway could it be made scalable? Kindest Bob England

@nathanstaley4588 2 жыл бұрын

Hey Shane, got a question for you if you don't mind. Is there a reason you don't use an Impact Driver for driving screws?

@diyforknuckleheads 2 жыл бұрын

G'day Nathan, no real reason mate...l just grab what is handy 👍

@philsketball 8 ай бұрын

What kind of glue? Wow

@diyforknuckleheads 7 ай бұрын

Just regular ol' Exterior Grade Aquadere mate 👍

@taylorsessions4143 2 жыл бұрын

That picture frame is stronger than I am! Last time I made a frame I accidentally dropped it and the glue joints failed!

@diyforknuckleheads 2 жыл бұрын

😂....must have been dodgy glue Taylor 👍 Thanks for watching mate 👍😁🇦🇺

@eastonvonschist2283 2 жыл бұрын

I have never been able to make a frame and get the rabbit measurement right for the picture I wanted to frame. I quit trying long ago.

@godsinbox 2 жыл бұрын

spring mitre clamps do actually make it easier.

@derekjenkinson8014 2 жыл бұрын

Rather than screws, add T track and then you could have a jig for many sizes of picture frames.

@diyforknuckleheads 2 жыл бұрын

👍👍

@bradpittbutcooler5462 2 жыл бұрын

Is PVA the same wood glue?

@diyforknuckleheads Жыл бұрын

Yes it is mate 👍

@thijspluis9998 2 жыл бұрын

can you tell me where you get your tapemesure in mm only? the yellow stanley one. I want one, but there are only the standard ones in mm and cm, and it is hard to read for sometimes

@diyforknuckleheads 2 жыл бұрын

Hi Thijs....if you are in Australia you can get them from Bunnings 👍

@thijspluis9998 2 жыл бұрын

@@diyforknuckleheads thnx. And if you are not from australia ..😁

@nevillewebb2856 2 жыл бұрын

G’day Shane - what is that black-faced plywood called your using please?

@diyforknuckleheads 2 жыл бұрын

G'day Neville.....it's called Formply. Concretors use this stuff to form up their concrete 👍

@nevillewebb2856 2 жыл бұрын

@@diyforknuckleheads ok thanks for getting back to me so quickly Shane - on site we used to use a marine ply type of board usually coated with a freeing agent slapped on with a brush (mind you, its along time since I worked on site). I’ve looked for formply over here in the UK and not found any suppliers, it looks like a really versatile material. Great channel mate!

@kevinmiller1881 2 жыл бұрын

The dad jokes are what makes these videos. 🤣

@diyforknuckleheads 2 жыл бұрын

😂...Glad you like them Kevin!

@bramble3693 Ай бұрын

At 2:30, why do you slide the miter about 1/8"?

@clintmash245 Ай бұрын

He wanted to give himself a little extra wiggle room. Makes it much easier to add the frame, and allows the wedges to sit very close to even when tight. Just a nice touch - not truly necessary, but appreciated.