Worx 20v Hammer Drill after 2 Years

Рет қаралды 14,512

Жыл бұрын

This is the Worx 20v power share cordless Hammer Drill. I purchased this originally to drill a hole in a rock. Now two years later I have used this drill more times than I can count. The hammer setting makes a world of difference when you are using a masonry bit to go into rock or concrete. The clutch allows you to limit the power of the drill. The full drill setting allows you to use the full power of this tool to make holes.
If you are interested in this tool check it out here:
amzn.to/3nluVv9
If you have a product that you would like to submit for video review please contact me by email here:
toolstechandgear@gmail.com
Amazon links are through the affiliate program.

Пікірлер: 19

@ColonelBummleigh 9 ай бұрын

Great drill I've had for two years now.Recent problem of not working intermittent and assumed it was the switch as both batteries did the same even when charged.Opening up switch assembly and degreasing terminals didn't fix it ( Don't advise this as it is fragile and has electrical grease on circuit points). I tested another 20V battery from the impact driver on it and it ran as normal and seems to have fixed whatever was happening as both original batteries run fine now too.

@justmeEnglandUK 9 ай бұрын

The switch gear often fails on this model or connection work lose . Sometimes a blow out with air line can help electrical connection

@bluemantom77 11 ай бұрын

I say use what works no pun intended I own a Ridgid gen 5 x brushless hammer drill my decision back in 2018 was the price still use it when I need something

@lostmoose9994 Ай бұрын

1000s of holes and looks almost like new

@ToolsTechAndGear Ай бұрын

I am very careful with my tools.

@alancheng2424 Жыл бұрын

Have you ever had the chuck stuck in one position and not able to loosen it up? I was able to get the bit out but now I can fit a larger bit into it :(

@ToolsTechAndGear Жыл бұрын

I have not had that issue. Mine seems to be working just fine.

@justmeEnglandUK 9 ай бұрын

I had issues with chucks on some of the worx drills some plastic chucks fail quickly and constantly drop the bits as the fail to grip the bits . If its the metal chuck and they become wet or damp they can become difficult to use . If you hold the chuck and run it forward and back numinous time they eventually losen up .if you can't hold the chuck use a wrench to hold the chuck . Don't use oil as they clog up .

@hayderalsalman7984 Жыл бұрын

The challenge in this video is to find video clips that contain videos of the drill....Nice tool

@ToolsTechAndGear Жыл бұрын

Haha should be plenty of them.

@akapandeo 5 ай бұрын

Can it drill through any wood without using the hammer function? 🔨 🔨 🛠 ⚒️

@ToolsTechAndGear 4 ай бұрын

Yes it has a normal drill setting. without the hammer.

@30kenton 10 ай бұрын

After 2 years mine are no longer working..not sure if it's battery issues or the drill and driver them self..

@mariankesler3585 7 ай бұрын

Recomand cu încredere AM lucrat cu Aceasta Autofiletanta și am văzut ca funcționează bn mi am cumpărat și eu și un flex tot de Aceiași Marca Worx

@ramongomezperal5417 11 ай бұрын

Que bale una bateria para ese taladro

@tomaszpaw174 10 ай бұрын

suuuuper

@sorinmanea7900 6 ай бұрын

Puterea nominală este de 18volți la,sunt bune ca scule dar sunt scumpe și nu prea se merită să alegi worx în defavoarea bosch sau makita

@khalidbazeer389 6 ай бұрын

hi there What he says can be true to work with wood and light cement bricks but............ with concrete you can't because 2 days back I bought one this tried on the concrete wall..... Not even an half inch I could drill through and bits getting heated up so I would say not combined drill Machine rather you go for one with only Hammer drill with clutch bits Sorry folks for disappointing you guys

@ToolsTechAndGear 6 ай бұрын

I used this hammer drill to put 4 holes in hard rock 2.5" deep. It works very well.