WP Xact Closed Cartridge Fork | Fork Seals | Xact vs 6500 | Highland Cycles
Рет қаралды 9,543
10 ай бұрынThe all new KTM WP Xact Closed Cartridge Fork! Full disassembly and replace fork seals. Servicing the WP Xact Closed Cartridge Forks.
Want a fork tool? bit.ly/OZyVDF
Support us at Rocky Mountain ATV/MC bit.ly/3qiJO3h
Want to buy me a coffee www.buymeacoffee.com/highland...
Need Some Gear For You and Your Bike?
1sttrackmoto.com/highlandscyc...
Need some tires?
veemototires.com/ Use code “highland”
Need a Gripper Chin Mount?
www.dango-design.com/?sld=mor...
Need a Permanent chin mount?
chinmounts.com/?ref=HIGHLANDC...
If you want to support this channel on Patreon, here is our page:
/ highlandcycles
If you like to shop on Amazon and you want to help us out, use this link www.amazon.com/shop/highlandc...
And then shop for whatever you want. It really helps us out a ton and we appreciate it very much
Want some Merch? amzn.to/3Wi6ri0
bit.ly/39rkdXm
Check out our social media too:
Facebook : / highlandcycles
Instagram : / highlandcycles
TikTok: @highlandcycles
Now…. Go Ride Your DIRTBIKES!!!
#gospeloftwowheels #dirtbikes #highlandcycles
Please support our sponsors
www.tbtracing.com/
xcgear.com/mako-360/
www.2strokeheads.com/
nitromousse.com/
www.systemtechracing.com/
ddcracing.net/
enduroeng.com/
bulletproofdesigns.com/
www.evanscoolant.com/vehicle-...
www.wlfenduro.com/
extreme-parts.com/
veemototires.com/
@terrystrahl3275 2 ай бұрын
Thanks Morgan, @ 41 hours both forks on my xc leaking like the Titanic. Knocked out service and new seals today with the help of your video.
@zachfarkash6430 9 ай бұрын
Good stuff, im so looking forward to getting the conversion done on my 89CR250R hopefully in the next month maybe
@DirtBikeDaryl 9 ай бұрын
Whoooo! Perfect timing. I’m changing just fork springs tomorrow. 😅
@speedtoad6167 9 ай бұрын
Sure makes it easy to measure spring preload. I like the design.
@d.brayman3165 9 ай бұрын
Thanks for the info, Morgan. Great instructional video!
@highlandcycles 9 ай бұрын
🤘🏻🤘🏻
@brycedavis907 9 ай бұрын
I usually wrap the threads in Teflon tape. probably overkill, but it makes me feel better about it.
@mattwindell1638 9 ай бұрын
I have a 2024 250xc and have no trouble using all the fork travel for c level hare scrambles. That is a first for me as I never could use the last 1-2” of travel on the air fork.
@ronhartle3268 9 ай бұрын
I think I'm actually starting to under stand how forks work after watching this most recent fork video you've put out. I've seen a lot of them you have done. I've just been mostly confused until today.
@MechShark 9 ай бұрын
Been waiting for this! YEEEEEBOI
@ronhartle3268 9 ай бұрын
Drill some 0.1 millimeter holes in the hidro-stop. That's a tiny drill but they make them. .0039 basically .004 inches (4 thousandths) hole.
@moonzy11 5 ай бұрын
7/8 deep socket will go rt over the rebound adjustment plug In the bottom. No need to remove the red adjuster
@juanfercordova5818 Ай бұрын
Thanks for the video! Where I can find the tool to loosen the inner chamber / compresión valve?
@terrystrahl3275 2 ай бұрын
Thanks!
@highlandcycles 2 ай бұрын
Thank you
@richardhartley7094 9 ай бұрын
Nice one👍
@MarkSpencerAZ Ай бұрын
Is that a huck valve similar to the lucky cartridges at the bottom there? You call it the hydro stop?
@jamesmcgrath5822 9 ай бұрын
Little off topic but do you have a video on replacing seals on the older KTM 50mm up right or what ever forks they are thanks
@highlandcycles 9 ай бұрын
I don’t think I have filmed that
@stephendavis7707 3 ай бұрын
Hi Morgan, Thanks for excellent content i am learning a lot ! I want to ask Two questions about 2021 AER 48 air forks ..first i would like to service my air chamber i dont have any issues but would like to re-grease as you advised in your vlog my problem is which grease is suitable ? Secondly in the manual they offer a variation of the amount of oil to refill the outer tubes of +40 what will the extra oil do (i am thinking more resistance ) so i am 95 kg should i raise the oil amount? thanks again if you do manage to answer this i would appreciate it ...Keep Vlogging
@highlandcycles 3 ай бұрын
I actually now add a little 10/40 motor oil in the air chamber for lube. About 5-10 cc’s. Adding oil will increase “spring” pressure so stiffer.
@bikemancody2752 9 ай бұрын
Ah I get it now. You don't need to set oil height on closed chamber. Is that correct? Nice video. I have a 24 300 xcw.
@highlandcycles 9 ай бұрын
Yes. That’s correct
@billdeck9766 9 ай бұрын
really have to clean the locktite out of the threads.
@andrecontois8510 9 ай бұрын
Hans and Franz haha!
@ronhartle3268 9 ай бұрын
Or turn it down slightly shorter on the lathe. Just use a part off tool.
@TomKDirtMuppet 7 ай бұрын
I wonder if instead of turning the hydrostop down it would make sense to drill some progressively smaller relief orifices in it?
@bikemancody2752 9 ай бұрын
Definitely dive into the hydra stop video. I rode my 24 300 XCW for the first time over the weekend. I did a 25mm lowering job. Im 215 without gear. .48 fronts 8.0 rear. The bike beat the sh#$ out of me. Even with the compression out all the way front and rear. Still have almost 3 inches travel left on front forks. Can u comment to that? Lol
@highlandcycles 9 ай бұрын
That’s crazy. Your spring rates sound way off to me
@bikemancody2752 7 ай бұрын
@@highlandcycles come to find out the shop that put my 25mm lowering kit in, put the stock oil amount back in. I took 50cc out.
@bikemancody2752 7 ай бұрын
Thoughts on cutting an 1 inch off the hydro stop?
@highlandcycles 6 ай бұрын
@@bikemancody2752 I think it could be good
@DirtBikeDaryl 9 ай бұрын
Cartridge oil capacity is 174ml External oil capacity is 390ml This information is out of the service manual specs.
@highlandcycles 9 ай бұрын
Thanks. The literature in the box calls for 370 in the outer chamber but doesn’t say anything about the inner.
@DirtBikeDaryl 9 ай бұрын
I put 390ml in my outer. May be a bit harsh… Good to know I can can go down to 370ml though. 🤜🏻🤛🏻
@davidgrunklee8407 9 ай бұрын
20ml difference in outer oil will only effect bottoming.. last couple inches of travel
@joemaynard5551 4 ай бұрын
Hey Morgan. Quick question for you sir. I have an old set of CC forks from 2012 or 2013. How did those compare to the new WP forks or the 6500s? I’m thinking of fixing them up to put them on my 21, 250XC TPI. The AER forks have been pretty good but down here in Georgia they get rough later in the day in the woods. Thanks.
@highlandcycles 4 ай бұрын
The old CC with the bladder are my favorite forks personally. They are what the Dal Soggio spheres are based on. I would dial those in for sure
@joemaynard5551 4 ай бұрын
@@highlandcycles Thank you for the fast feedback and I'm glad to hear that you like the old CC forks. Made my day. Cheers
@al-ew3mj 8 ай бұрын
can you change springs without oil didnt c any when you took springs out thx
@highlandcycles 8 ай бұрын
No you can’t
@grantmotox123 9 ай бұрын
wait till you tear a 24 xcw shock apart. Things just don't seem to add up
@ianjones7526 8 ай бұрын
Thanks for the awesome video. Who makes the tool you used to get the inner cartridge apart. I think it was red in color. You had a motion pro one on the bench but it look bigger. At 6:20 in the video
@highlandcycles 8 ай бұрын
That a motion pro tool
@ianjones7526 8 ай бұрын
@@highlandcyclessorry I should have asked if you know the part number of it or the size. Want to order the tool. Thx for your response
@highlandcycles 8 ай бұрын
@@ianjones7526 sorry. Here is the tusk version. It actually fits better bit.ly/2ieaCPW
@ianjones7526 8 ай бұрын
@@highlandcycles your awesome thanks
@ianjones7526 8 ай бұрын
Oh my that red lock tire was a real pain. The hydrostop wouldn’t come off for me. Had to continuously go back and forth with heat and slowly it came off. Seemed like it was galled on there. Even after cleaning the threads all out it still seems to go on tight. Not sure why.
@grutzmac 25 күн бұрын
can you pull a spacer out above the spring to decrease preload? Or will the spring flop around?
@highlandcycles 25 күн бұрын
I don’t think you can. I’d need to get back in there but I’m pretty sure you need them in there
@grutzmac 25 күн бұрын
@@highlandcycles thanks. whats the oil capacity for the damper and the outter chamber on the new CC Xact forks? Can't find this in the manual.
@derekwalker7831 9 ай бұрын
Hey dude! Im doing a bottom end rebuild on a 98' ktm 125 , I need a primary gear holder that's custom to the bike but I was just wondering if there any aftermarket kits that fit a variety of different sizes? I'd rather have a kit and have tools to fit other bottom ends that just one that costs 60$ What would you recommend? Thank you?
@highlandcycles 9 ай бұрын
I’m not sure. Probably going to be tough on that year of bike
@burstcasino 2 ай бұрын
Are these '24 forks the same as the Gasgas '24 forks on a xc350f? I'm about to do a thang...
@highlandcycles 2 ай бұрын
Yes
@SpankYa 3 ай бұрын
Morgan, I want to do an early oil change on my 6500 kit. If I am only changing the outer chamber oil, do I need to unscrew the nut at the bottom of the fork shoe and remove the cartridge to drain all of the oil? Thanks
@highlandcycles 3 ай бұрын
if you want it all out, you do
@SpankYa 3 ай бұрын
@@highlandcycles Thanks. Will do.
@CainBrew2 9 ай бұрын
Looking for that fork cap protector tool.
@highlandcycles 9 ай бұрын
www.highland-cycles.com/store/highland-cycles-fork-protector-tool
@kirkthepimp1 9 ай бұрын
Is the 6500 upgrade worth it compared to the stock 24 stock set up?
@highlandcycles 9 ай бұрын
I don't think so. I think with a little work the stock 24 stuff will be just as good.
@burstcasino 2 ай бұрын
Can anybody point me in the direction for a spring chart on these '23-24 xact closed cartridge forks. I compared race tech and slavens and they differ by about 3 or 4 sizes. I need big boy springs as I weigh about 235 w/o gear. Has me scratching my noggin'. Thanks
@highlandcycles 2 ай бұрын
Email me at morgan@highland-cycles.com I can get you dialed
@mcjoneszin 9 ай бұрын
Hint, when the rod is fully extended, you want the ICS to be under pressure..
@bikemancody2752 9 ай бұрын
Silly ask, what is an ISC?
@mcjoneszin 9 ай бұрын
@@bikemancody2752 corrected .. ICS internal compression spring.
@Olehkhomyk 9 ай бұрын
So is it possible to drop 6500 into this new chamber ? with some specific adapter maybe ?
@highlandcycles 9 ай бұрын
Yes.
@derfyddezx9 9 ай бұрын
Did the other fork have air in it like the one you showed us in the video?
@highlandcycles 9 ай бұрын
@@derfyddezx9 No it didn't. Weird
@Andy-co6pn 3 ай бұрын
Does the oem skf seal kit fit the AER forks ?
@highlandcycles 3 ай бұрын
Yes
@scottphillips445 9 ай бұрын
Why do you dislike metering rod carbs? I am a keihin kind of guy, but the mikuni tmx can be made to work
@highlandcycles 9 ай бұрын
The mikuni isn’t a metering rod carb
@scottphillips445 9 ай бұрын
@@highlandcycles I know that the mikuni is not a metering rod carb. Smartcarb and lectron are what I am asking about. I have never ran a metering block carb. I am also an old schooler that has bench tuned the carb I run. I put a merge racing accelerator pump spring and a quickshot 2 in my 06 450R. The jd jetting needles are great for the tmx. Typical trail riders don't tune shit creating a demand for technology to idiot proof trail bikes
@Firepath 9 ай бұрын
Are you a fan of Vegemite? Asking as an interested Australian who can see it on the top shelf there. Most non-Australians use too much at once and find it terrible.
@highlandcycles 9 ай бұрын
I love it
@Bob12366 7 ай бұрын
How often should you do your fork oil and do you need to do the seals every time ? I have the 24 TX 300 got 35 hours on it
@highlandcycles 7 ай бұрын
We recommend every 50ish hrs. As far as seals…. That’s a tough one. If you can do it yourself and you use good parts, no you don’t have to do them every time. As a shop, I rarely touch forks without replacing seals because I don’t want to have to do them again if it leaks right away for some reason.
@Bob12366 7 ай бұрын
@@highlandcycles I super appreciate your response! Love the channel your crushing it!
@Cookie-pjc 9 ай бұрын
What’s the tool called for the cartridge cap bud?
@highlandcycles 9 ай бұрын
The one to take it apart? I don’t know but motion pro sells it.
@BERZERKERSV4 9 ай бұрын
Ever consider starting your own suspension service/tuning “company”?
@highlandcycles 9 ай бұрын
We are a part of TBT
@BERZERKERSV4 9 ай бұрын
Excellent !
@sendit6011 4 ай бұрын
Anyone here with these forks have issues with the air build up. I can hear the forks make swoosh noise while I ride. The forks blew air and oil out of my seals when I seal mated them. Te300 24, 18 hrs.
@highlandcycles 4 ай бұрын
That’s odd
@sendit6011 4 ай бұрын
If I run into you at peach I’ll let you take it for a spin
@Andy-co6pn 3 ай бұрын
How about drilling a small bleed hole near the top of the hydrostop ?
@highlandcycles 3 ай бұрын
That would definitely change it.
@lostinpa-dadenduro7555 9 ай бұрын
I’m pretty disappointed the GasGas Enduros (EC) model don’t come with them this year. Bad move. Maybe they need to use up existing Explor fork inventory. Perhaps in 2025 it will change. But the new forks are a big draw on the 2024 models. I was considering selling my TPI and getting a TBI GasGas, but not now. 😭
@highlandcycles 9 ай бұрын
That does suck.
@user2594 8 ай бұрын
I was at the same point. being disappointed the GG didn`t have it. I rode the closed cartridge ones and its a blast. But then tried the new `24 GASGAS and they changed totally the setting and there is a huuuge difference between the old ones and the new one. I can recommend it 👍
@Duramaaxxx 4 ай бұрын
What ever happened with that Air issue in the cartridge? Did the other Fork have the same issue?.. Wondering if I should pull mine apart just to check that it was bled properly.
Highland Cycles
Рет қаралды 6 М.
mXrevival
Рет қаралды 22 М.
Slavens Racing
Рет қаралды 6 М.
Highland Cycles
Рет қаралды 10 М.