WRIST TO FLOOR MEASUREMENT FOR LENGTH

Рет қаралды 188,260

9 жыл бұрын

This video is about wrist to floor measurements for golf shaft length. For added information about cutting-edge golf components, go online to www.wishongolf.com.

Пікірлер: 62

@jumpship88 2 жыл бұрын

I just started playing golf. I bought a nice used ping driver and wasnt hitting nearly as well as my irons. I measures it and its 47". I choked up on the shaft and cut a few inches off and today I was sending nukes straight down the fairway. Felt really nice thank you for your amazing advice.

@ewanrankinegolf6341 6 жыл бұрын

Excellent video! Very well explained.

@Play2Win1958 6 жыл бұрын

Good vid Tom going for my PING i200 iron fitting tomorrow !

@taxitalknyc7600 4 жыл бұрын

05:45 Here we go... THANKS !! ;)

@aidanmcgrath5487 7 жыл бұрын

is there anywhere in Ireland that uses your fitting guide. I'm interested in your single length irons

@righteous1672 6 жыл бұрын

great video!

@tigerbricks 6 жыл бұрын

Good points Tom ...

@shofey 3 жыл бұрын

Thanks for this.

@richardgibbs1527 3 жыл бұрын

Thank you.

@carlosfigueroa2714 6 жыл бұрын

Hi Tom I,m Carlos club fitter the Sao Bento Golf in Brasil Very good that informations .

@dirtyoffroader2093 6 жыл бұрын

Hi Tom, I've been playing a standard length PX6.0 LZ shaft and love it. But at two recent fittings I've been told I should be playing a shaft 1/2 inch longer. (I'm 6ft1 with a wrist to floor of "37) my concern is - will this extra 1/2 inch effect the shaft flex, especially by moving the middle PX ''loading zone'' that makes this shaft so likeable half inch. I've read alot of mixed answers via the net. If it does effect it, can it be hard stepped even though it's been lengthend?. Your advice would be greatly apprieciated - Many thanks

@brianhernandez5880 4 жыл бұрын

Could you please E Mail the measurement Chart and how to use it possiably showing a Drawing ??

@aldoileanumeliber 3 жыл бұрын

thanks!

@mukulrawat 5 жыл бұрын

Does wrist to floor measurement hold well for the hybrids and specially for driving iron type of clubs?

@julianhughes9644 8 жыл бұрын

hi tom , fantastic vlog which has got me thinking , im 5 ft 7 and wrist to floor is 32 in , I play off 9 , since watching this I have gone to the practice range and gripped down on my driver and hit golf balls until I've found a position now where if I choke down 1 1/2 inchs on my driver I now hit the middle more consistently , I use a titliest 910 d2 , would you suggest that I stick to choking down or as this is adjustable getting a 43 1/2 inch shaft , any thoughts would be really appreciated , kind regards jules

@camobooty2008 4 жыл бұрын

Julian Hughes does these pants make my butt look big?

@shofey 3 жыл бұрын

@@camobooty2008 Is that jealousy or you just have nothing of value to add.

@stumarston6812 Жыл бұрын

@@camobooty2008 It's comfortably erect.

@wills8930 7 жыл бұрын

so being a taller golfer of 6'5 and having a passion for building clubs for a decade; I wanted to ask about creating irons in the 1.5 inch longer or 2 inch longer irons that possess a lower torque shaft, light overall weight profile, iam certainly more of a hitter of the ball in swing characteristic; I am searching for longer irons overall little weight to maintain physical control and to prevent fatigue throughout a evening of golf. but most shafts in lower weights i.e 80, 70 grams are mainly high launch profiles...what would you recommend...?

@wishongolfvideo 7 жыл бұрын

Will: While it is true that longer length irons can increase the torque on the club and shaft, it is not a significant increase over the normal swing forces at normal lengths so there is no need to think about trying to do anything to offset it. A much bigger problem is to try to find lighter heads or to try to push yourself to not go so long with your length that it makes the swingweight/head weight feel get way too high and adversely affect your swing tempo and timing. A lot of people who need longer length irons are finding if they don’t go quite as long as they think they should with the 4, 5 irons and then use 3/8” increments between the irons through the set, or even ¼” increments, this gives the tall person the comfort they seek over the ball with the higher loft irons which are the ones that were more of a problem for comfort because of your height.

@wills8930 7 жыл бұрын

I throughly agree with the 3/8 incremental iron ideal; I believe I've been brain washed into only using 0.5 increments due to working with them mainly over the years. I will certainly implement the 3/8" and see if this encourages better results. But I should express that I am primary playing the bridgestone j 36 cb irons with xp 105 shafts at 1.5 over length, I state the model of irons due to the lack of uniform standards throughout the industry with respect to the evolution of golf irons throughout the years and find them very comfortable but they possess higher swingweights, which is great for a period of time, but to maintain shot consistency with them, id have to hit the gym everyday, this isn't ideal for my current lifestyle at the moment ...but you ve made a great point and i will certainly attempt the incremental change. I'd love to find a source where the head wts. of irons could be produced for custom orders. Thanks again..really enjoyed your video. Best Regards Will

@ryandavidtrapasso 9 жыл бұрын

Tom, great video and information here, but doesn't this separation in fitting for irons and woods possibly create a large gap between the golfer's lowest lofted hybrid and their highest lofted fairway? If, say, my driver was 44", one inch separation gets me to 41" in my 7 wood, but a 38 inch 5 iron gapped up once to a 24* hybrid puts that length at 38.5, max, if keeping hybrids in the iron gapping. Is there a way to solve that issue?

@wishongolfvideo 9 жыл бұрын

Ryan Trapasso There really is no relationship from a technical fitting standpoint between the length of a golfer's driver/woods and the length of his irons. There are golfers whose best fit in the irons may be a 40" #5 iron whose best fit for the driver could be 43". Same as there can be a golfer whose best comfort fit in the irons may be a 37" #5 iron but by virtue of him having exactly the right swing characteristics for control, his best driver length could be 45". Driver/Woods and Irons are two totally different "animals" when it comes to fitting, which is pretty much what I am saying here in the video when I say fit the irons for comfort and the driver/woods for swing ability.

@ryandavidtrapasso 9 жыл бұрын

That's so interesting - thanks Tom, appreciate it!

@summerman2 7 жыл бұрын

Tom how short have you made drivers?

@krusher74 2 жыл бұрын

Is that in relation to an adult?

@KenPotter Жыл бұрын

I'm struggling with finding a good Driver Length. I'm 6-2. When I use a standard 45, I tend to rub holes into my glove where the butt rubs into the heel of my hand. When I choke-up and bend over more, I LOSE Control and Distance.. it feels very unnatural to bend over that much.

@kepler240 Жыл бұрын

this cat knows his stuff

@dcvideo2 6 жыл бұрын

I am confused about fitting for static length of clubs. I have clubs that were built for me 1 inch longer than standard (my wrist to floor length is a little over 38 inches while common belief is the 7 iron standard length is 37 inches). My 7 iron swing weight with TT XP-95 R300 shafts is D5. Lie angle set at 2 degrees upright. A different fitter is now telling me this setup is wrong. He says it's better to stay closer to standard length and adjust the lie angle instead to set the bottom of my swing. He says it also stiffens the shaft by lengthening them. Confusion reigns! What to do? There seems to be more than one philosophy regarding all this. Is wrist to floor a useless measurement?

@krusher74 2 жыл бұрын

how can a longer shaft be stiffer?

@josephrizzo6591 Жыл бұрын

Can I et a copy of your wrist to floor measurements for lengths.

@DonavanCMcCoy 5 жыл бұрын

Tom, how does this affect the measurement of Single Length Irons?

@steveebling8480 4 жыл бұрын

If all your irons are 7 iron iron length you need calculate the length of your 7 iron for all of them.

@zyxnix 5 жыл бұрын

interesting

@johnhoward1904 5 жыл бұрын

Tom, you remind me a little of Eddie Money. Have you ever got that one? Cheers.

@mmm0513 3 жыл бұрын

Yes Eddie murphy, spitting image

@DJJ246810 6 жыл бұрын

Niles!!!

@TheNYgolfer 4 жыл бұрын

Great info. Especially after you've heard it for the 3rd time :) Length measurement procedure starts at 6:40 It's a starting point for the irons only!! Length measured is for 5 iron Add 1/2 inch for longer irons than the 5 and subtract 1/2 inch for shorter ones. This is the "standard" adjustments in lengths He prefers 3/8 inch increments. Doesn't say anything about single length irons Driver length should be based on players ability not by the "standard" 45 or 46 inch lengths the manufacturers use Nothing mentioned about club lengths for clubs other than the irons and the driver. Just saved you 8 minutes of your life You're welcome :)

@chubeviewer 4 жыл бұрын

I think tall people should try 1 length irons

@JB-hi7rr 6 жыл бұрын

The teacher from ferris bueller

@dallasgreen378 Жыл бұрын

Lol

@eggsmann594 2 жыл бұрын

Tom's left shoulder sags a perfect inch lower than his right 😆

@jaredkish992 2 жыл бұрын

My right shoulder does the same because I broke my collarbone and have at titanium plate over it. It has its pros and cons lol

@tompem 6 жыл бұрын

"shoulders perfectly level" at 8:59...Clearly right shoulder is about 2 inches higher than left shoulder. Just saying..

@easyduzit6118 11 ай бұрын

Why would you not go with one length? Having different length irons does not make much sense to me.

@Moishe555 5 жыл бұрын

I bet this guy loves a good onion bagel and lox. Can't explain it

@steveperry1344 4 жыл бұрын

try to explain it. i like bagels and lox too, don't you?

@harver7 6 жыл бұрын

So I guess I should choke down on all my clubs and find the sweet spot. Right ?

@mike24819 4 жыл бұрын

I looked up CRAP in the dictionary ... It directed me too your company . Stick to music

@lawrenceblandford8927 4 жыл бұрын

You must sell clubs off the shelf.

@mike24819 4 жыл бұрын

@@lawrenceblandford8927 I'm a CPGA pro ...this guys an ex drummer from Steve Miller band lol... What a joke ...his clubs are 100% overpriced... Junk

@lawrenceblandford8927 4 жыл бұрын

@@mike24819 CPGA pro? They hand out that title like candy. LOL.

@mike24819 4 жыл бұрын

@@lawrenceblandford8927 Let's see your accreditation ... Oh that's right you need to make it past grade 5 first ..

@shofey 3 жыл бұрын

@@mike24819 Cmon Mike We're all trying make a living. Doubtful he's taking your customers.

@rodgerwelsh2080 3 жыл бұрын

9 minutes of usless comment

@davidcataldo1222 6 жыл бұрын

9:00 mins. to tell wrist to floor ... what a waste of time

@DonavanCMcCoy 5 жыл бұрын

David Cataldo , your comment was a waste of your time too. Since you are such a public advocate of not having your time wasted, don’t be a hypocrite. So wasteful.